Search

Background: Lateral approaches to total knee arthroplasty (TKA) provide good surgical exposure and may provide greater ease of soft tissue balancing in patients with a valgus deformity; however, little is known about the versatility in non-valgus knees. The present study evaluated if a lateral subvastus approach can achieve adequate surgical exposure while maintaining less soft tissue damage compared with the medial parapatellar approach in knees without any significant deformity., Methods: Using paired fresh-frozen cadaveric knees, the present study provides the first specimen-matched, side-by-side comparison of the lateral subvastus approach to the standard medial parapatellar approach to TKA. Ten knees were selected to undergo a lateral subvastus approach; the contralateral knee had a medial parapatellar approach as control. Incision length, surgical exposure and iatrogenic soft tissue damage were compared between the two approaches., Results: The lateral subvastus approach was successfully performed using an incision length that was not different from that used in the medial parapatellar approach (p > 0.05). The resultant surgical exposure was comparable between approaches (p > 0.05). The risk of the approach included tearing of the vastus lateralis fibers, and/or abrasion of the iliotibial tract/patellar ligament., Conclusions: The lateral subvastus approach to TKA provided a comparable method to the standard medial parapatellar approach. Despite adequate exposure, the approach did risk soft tissue injury. Caution needs to be exercised to reduce the risk of iatrogenic injury to the vastus lateralis and surrounding ligaments. The successful implementation in this cadaveric study substantiates the need for further consideration of this approach in clinical practice., Competing Interests: Declaration of competing interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: Revision of TKA as a result of polyethylene wear is decreasing, but long-term wear performance of polyethylene is still a topic of interest to surgeons and device manufacturers seeking to improve longevity. Measuring wear of modern, wear-resistant implants has been described using radiostereometric analysis (RSA). Performing in vivo measurements would establish whether implant retrieval studies are representative of wear in well-performing knees., Questions/purposes: For a single knee implant system, we sought to determine (1) the linear wear rate using RSA; (2) the association between demographic factors and wear rate; and (3) the association between limb alignment and wear rate., Methods: A total of 49 patients with a minimum followup of 10 years (median, 12 years; range, 10-20 years) were retrospectively selected. During the examined period, 4082 TKAs were performed of which 2085 were the implant examined in this study. There were 71 of these patients who met the criteria including an available full-leg radiograph postoperatively, and 34 of these patients returned for examination along with 15 additional from a separate RSA study that also met the criteria. All patients received a posterior-stabilized, cobalt-chromium-on-conventional polyethylene total knee implant from a single implant system, which was the most commonly used at our institution at the time. Patients underwent standing RSA examinations from 0° to 120° of flexion at a single time point without the use of marker beads. Linear wear rates (including creep) were measured based on intersections between the femoral component and tibial insert models. Associations between wear and patient age at surgery, sex, height, weight, body mass index, tibial insert size, and limb alignment were examined., Results: Using the maximum linear wear rate from any flexion angle, the lateral rate was 0.047 mm/year (interquartile range [IQR], 0.034-0.066 mm/year) and the medial rate was 0.052 mm/year (IQR, 0.040-0.069 mm/year). Using the median of the linear wear rates across all flexion angles, the lateral rate was 0.027 mm/year (IQR, 0.017-0.046 mm/year) and the medial rate was 0.038 mm/year (IQR, 0.022-0.054 mm/year). This rate for males was 0.049 mm/year medially (IQR, 0.042-0.077 mm/year) and 0.032 mm/year laterally (IQR, 0.026-0.059 mm/year), and for females was 0.027 mm/year medially (0.016-0.039 mm/year) and 0.020 mm/year laterally (IQR, 0.013-0.032 mm/year). The wear rate for males was greater medially (difference = 0.022 mm/year, p < 0.001) and laterally (difference = 0.012 mm/year, p = 0.008). There were associations between greater wear and increasing height (ρ = 0.48, p < 0.001 medially and ρ = 0.30, p = 0.04 laterally), decreasing body mass index (ρ = -0.31, p = 0.03 medially), and greater implant size (ρ = 0.34, p = 0.02 medially). Increasingly varus leg alignment was associated with greater medial wear (ρ = 0.33, p = 0.02)., Conclusions: Greater wear rates were associated with demographic factors and leg alignment. Further RSA wear studies of other modern implant systems would provide complementary information to retrieval studies and valuable data on wear resistance., Clinical Relevance: Good wear resistance was demonstrated by well-performing implants in patients at long-term followup with wear magnitudes in agreement with reported values from retrieval studies.

Background: In 2012, a new Knee Society Knee Scoring System (KSS) was developed and validated to address the needs for a scoring system that better encompasses the expectations, satisfaction, and physical involvement of a younger, more active population of patients undergoing TKA. Revalidating this tool in a separate population by individuals other than the developers of the scoring system seems important, because such replication would tend to confirm the generalizability of this tool., Questions/purposes: The purposes of this study were (1) to validate the KSS using a separate sample of patients undergoing primary TKA; and (2) to evaluate the internal consistency of the KSS., Methods: Intervention and control groups from a randomized controlled trial with no between-group differences were pooled. Preoperative and postoperative (6 weeks and 1 year) data were used. Patients with osteoarthritis undergoing primary TKA completed the patient-reported component of the KSS, Knee Injury and Osteoarthritis Outcome Score (KOOS), SF-12, two independent questions about expectations of surgery, and the Patient Acceptable Symptom State (PASS) single-question outcome. This study included 345 patients with 221 (64%) women, an average (SD) age of 64 (8.6) years, a mean (SD) body mass index of 32.9 (7.5) kg/m, and 225 (68%) having their first primary TKA. Loss to followup in the control group was 18% and loss to followup in the intervention group was 13%. We quantified cross-sectional (preoperative scores) and longitudinal validity (pre- to postoperative change scores) by evaluating associations between the KSS and KOOS subscales using Spearman's correlation coefficient. Preoperative known-group validity of the KSS symptoms and functional activity score was evaluated with a one-way analysis of variance across three levels of physical health status using the SF-12 Physical Component Score. Known-group validity of the KSS expectation score was evaluated with an unpaired t-test by comparing means across known expectation groups. Known-group validity of the KSS satisfaction score was evaluated with an unpaired t-test by comparing means across yes/no response groupings of the PASS single-question outcome. Internal consistency for each KSS subscale was evaluated with Cronbach's α., Results: Cross-sectional validity (ie, associations at a single point in time) was supported because correlation coefficients between KSS symptoms, functional activities, and satisfaction scores and scores on the KOOS pain subscale ranged from 0.60 to 0.73 (all correlations p < 0.01). Values were similar for associations with the KOOS function in the activities of daily living (ADL) subscale (0.66-0.69) and less (0.41-0.58) for correlations with the other three KOOS subscales. Longitudinal validity (ie, associations of change scores between two time points) was also supported because correlation coefficients between KSS symptoms, functional activities, and satisfaction change scores and the KOOS pain and ADL change scores varied from 0.63 to 0.73. Correlation coefficients were lower for the other three KOOS subscale change scores, suggesting a weaker relationship with KOOS symptoms (0.48-0.53), sports (0.47-0.51), and quality of life (0.60-0.65) (all correlations p < 0.01). Known-group validity (ie, differences between groups that are known to differ on a given characteristic) was confirmed by between-group differences for the symptoms and functional activities score comparisons as well as the comparisons with the expectations and satisfaction scores of the KSS (all p < 0.01). Cronbach's α (ie, association among subscale items) varied from 0.68 (discretionary activities) to 0.94 (postoperative expectations) across four KSS subscales., Conclusions: Moderate-sized correlation coefficients and consistent differences between known groups support the validity of the KSS. Internal consistency values were also acceptable. The patient-reported subscales of the KSS are a valid and internally consistent outcome assessment for TKA.

Background: Tibial baseplate roughness and polyethylene-insert micromotion resulting from locking-mechanism loosening can lead to polyethylene backside wear in TKAs. However, many retrieval studies examining these variables have evaluated only older TKA implant designs., Questions: We used implant-retrieval analysis to examine if there were differences in: (1) backside damage scores, (2) backside damage modes, and (3) backside linear wear rates in five TKA implant designs owing to differing baseplate surface roughness and locking mechanisms. Additionally, we examined if (4) patient demographics influence backside damage and wear., Methods: Five TKA implant models (four modern and one historical design) were selected with different tibial baseplate and/or locking mechanism designs. Six tibial inserts retrieved at the time of revision from each TKA model were matched for time in vivo, age of the patient at TKA revision, BMI, sex, revision number, and revision reason. Each insert backside was analyzed for: (1) visual total damage score and (2) individual visual damage modes, both by two observers and with an intraclass correlation coefficient of 0.66 (95% CI, 0.39-0.92), and (3) linear wear rate measured by micro-CT. Median primary outcomes were compared among the five designs. For our given sample size among five groups we could detect with 80% power a 10-point difference in damage score and an 0.11-mm per year difference in wear rate., Results: The polished tibial design with a partial peripheral capture locking mechanism and anterior constraint showed a lower total damage score compared with the nonpolished tibial design with only a complete peripheral-rim locking mechanism (median, 12.5; range, 9.5-18.0; 95% CI, 9.58-16.42 versus median, 22.3; range, 15.5-27.0; 95% CI, 17.5-26.5; p = 0.019). The polished baseplate with a tongue-in-groove locking mechanism showed more abrasions than the nonpolished baseplate with a peripheral-rim capture and antirotational island (median, 7.25; range, 0.5-8.0; 95% CI, 2.67-8.99 versus median, 0.75; range, 0-1.5; 95% CI, 0.20-1.47; p = 0.016)). Dimpling was a unique wear mode to the nonpolished baseplates with the peripheral-rim capture and antirotational island (median, 5.5; range, 2.0-9.0; 95% CI, 2.96-8.38) and the peripheral-rim capture alone (median, 9.0; range, 6.0-10.0; 95% CI, 7.29-10.38). Overall, the linear wear rate for polished designs was lower than for nonpolished designs (0.0102 ± 0.0044 mm/year versus 0.0224 ± 0.0119 mm/year; p < 0.001). Two of the polished baseplate designs, the partial peripheral capture with anterior constraint (median, 0.083 mm/year; range, 0.0037-0.0111 mm/year; 95% CI, 0.0050-0.0107 mm versus median, 0.0245 mm/year; range, 0.014-0.046 mm/year; 95% CI, 0.0130-0.0414 mm; p = 0.008) and the tongue-in-groove locking mechanism (median, 0.0085 mm/year; range, 0.005-0.015 mm/year; 95% CI, 0.0045-0.0138 mm; p = 0.032) showed lower polyethylene linear wear rates compared with the nonpolished baseplate design with only a peripheral-rim capture., Conclusions: Total damage scores and linear wear rates were highest involving the nonpolished design with only a peripheral rim capture. There were no differences among the other TKA designs regarding damage and wear, but this finding should be considered in the setting of a relatively small sample size., Clinical Relevance: Our study showed that in the complex interplay between baseplate surface finish and locking mechanism design, a polished baseplate with a robust locking mechanism had the lowest backside damage and linear wear. However, improvements in locking mechanism design in nonpolished baseplates potentially may offset some advantages of a polished baseplate. Further retrieval analyses need to be done to confirm such findings, especially analyzing current crosslinked polyethylene. Additionally, we need mid- and long-term studies comparing TKA revisions attributable to wear and osteolysis among implants before understanding if such design differences are clinically relevant.

Purpose: The role of neutral alignment in total knee arthroplasty (TKA) on short- and long-term outcomes has become controversial. Based on the concept of constitutional varus, it has been suggested that under-correction in TKA in a varus osteoarthritis (OA) population might lead to better clinical outcomes. However, it is still unknown what the relationship between constitutional varus and the development of end-stage OA is. The goal of this study was to analyse the contribution of constitutional varus in a medial OA population and to define a correlation between the constitutional alignment and end-stage varus OA., Methods: Based on full-length radiographs, corrected for the intra-articular deformity of the knee, of 315 patients with unilateral end-stage medial OA of the knee (Charnley type A), a correlation in the coronal plane was made between medial end-stage OA and the contralateral non-arthritic side., Results: With increasing varus alignment in the arthritic limb, the physiologic limb alignment also became more varus. The proportion of constitutional varus rose with increasing overall alignment and was found to be continuous for males. Constitutional varus was three times higher in men when the overall arthritic alignment was greater more than 6° varus., Conclusion: Constitutional varus significantly contributes to varus osteoarthritis and was found to be higher than in the general population., Level of Evidence: III.

Background: Patellofemoral joint biomechanics contribute to anterior knee pain, instability, and dysfunction following total knee arthroplasty (TKA). Information about specific factors leading to anterior knee pain and dysfunction is currently limited. Changes in patellofemoral joint offset (PFO) refers to a mismatch between the preoperative and postoperative anteroposterior geometry of the patellofemoral joint. It remains unclear whether these changes lead to adverse outcomes in TKA., Methods: A retrospective radiographic review of 970 knees pre-TKA and post-TKA was completed to correlate the radiographic and clinical outcomes of changing the PFO using a posterior-stabilized single knee design with patellar resurfacing., Results: A total of 970 patients were reviewed. Postoperatively, the anterior femoral offset, anteroposterior femoral size, and anterior patellar offset were changed in 40%, 60%, and 71% of knees, respectively, compared to preoperative values. The Western Ontario and McMasters Osteoarthritis Index total score as well as subscale scores for pain and function were not significantly affected by an increase or decrease in PFO. Similarly, Knee Society Scores and range of motion were not significantly affected. Increased anterior patellar offset was, however, associated with increased postoperative patellar tilt. Postoperative patellar tilt was not correlated with adverse patient satisfaction scores or loss of range of motion., Conclusion: Changes in PFO (decreased, maintained, or increased) are common post-TKA and are not associated with a difference in clinical outcomes. Increases in anterior patellar offset led to increased patellar tilt, which was not associated with adverse patient satisfaction scores., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Background: Wear in posterior-stabilized (PS) polyethylene tibial inserts depends on component position, limb alignment, and ligament balancing. Valgus-varus constrained (VVC) inserts are likely to be affected similarly. We aimed to compare wear characteristics of VVC and PS inserts and identify associated factors., Methods: This was a retrieval analysis (macroscopic and radiographic) of all 18 VVC liners collected from patients who underwent revision surgery from 1999 to 2011. These patients were matched to another group with PS inserts who underwent revision in the same time period., Results: There was significantly more damage in the posts of the VVC group (13.0 ± 5.0, compared to 4.7 ± 1.9 in the PS group; P < .001). Within the VVC group, the total damage score and cold flow damage were significantly higher with excessive joint line changes (≥5 mm; P = .01). The excessive joint line elevation was associated with rotational wear pattern of the post (P = .004). Damage scores were increased with femoral component malposition (P = .04), anterior tibial slope (P = .04), and tibial component malposition (P = .04)., Conclusion: Joint line elevation, femoral and tibial component malposition, and anterior tibial slope resulted in significantly more wear in the VVC inserts. Joint line elevation of >5 mm resulted in wear of the medial and lateral aspects of the post, femoral valgus resulted in cold flow wear of the anterior post, and tibial valgus and anterior slope resulted in wear of lateral aspect of the post., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Aims: The purpose of the present study was to examine the long-term fixation of a cemented fixed-bearing polished titanium tibial baseplate (Genesis ll)., Patients and Methods: Patients enrolled in a previous two-year prospective trial (n = 35) were recalled at ten years. Available patients (n = 15) underwent radiostereometric analysis (RSA) imaging in a supine position using a conventional RSA protocol. Migration of the tibial component in all planes was compared between initial and ten-year follow-up. Outcome scores including the Knee Society Score, Western Ontario and McMaster Universities Arthritis Index, 12-item Short Form Health Survey, Forgotten Joint Score, and University of California, Los Angeles Activity Score were recorded., Results: At ten years, the mean migration of the tibial component was less than 0.1 mm and 0.1° in all planes relative to the post-operative RSA exam. Maximum total point movement increased with time (p = 0.002) from 0.23 mm (sd 0.18) at six weeks to 0.42 mm (sd 0.20) at ten years., Conclusion: The low level of tibial baseplate migration found in the present study correlates to the low rate of revision for this implant as reported in individual studies and in joint replacement registries., Take Home Message: Overall, the implant was found to be well fixed at ten years, supporting its continued clinical use and the predictive power of RSA for determining long-term fixation of implants. Cite this article: Bone Joint J 2016;98-B:616-21., (©2016 The British Editorial Society of Bone & Joint Surgery.)

This study investigated whether subluxation of articulating antibiotic spacers is associated with the bone defects found and constraint required when re-implanting the knee arthroplasty components. Staged revisions for infections of primary total knee arthroplasties between 2004 and 2012 were examined. Radiographic sagittal and coronal subluxations of 72 knees were measured prior to second stage revision. Coronal subluxation was found to be associated with increased requirement for constrained knee systems (P<0.035). Sagittal subluxation was associated with greater tibia bone defects (P<0.037). Careful surgical technique and monitoring of articulating spacers should be done to avoid subluxation after stage 1 revision. If subluxation of the articulating spacer is present, constrained revision knee systems as well as augments should be available at time of re-implantation., (Copyright © 2016 Elsevier Inc. All rights reserved.)

The purpose of this study was to compare clinical outcomes of total knee arthroplasty (TKA) after manipulation under anaesthesia (MUA) for post-operative stiffness with a matched cohort of TKA patients who did not requre MUA. In total 72 patients (mean age 59.8 years, 42 to 83) who underwent MUA following TKA were identified from our prospective database and compared with a matched cohort of patients who had undergone TKA without subsequent MUA. Patients were evaluated for range of movement (ROM) and clinical outcome scores (Western Ontario and McMaster Universities Arthritis Index, Short-Form Health Survey, and Knee Society Clinical Rating System) at a mean follow-up of 36.4 months (12 to 120). MUA took place at a mean of nine weeks (5 to 18) after TKA. In patients who required MUA, mean flexion deformity improved from 10° (0° to 25°) to 4.4° (0° to 15°) (p < 0.001), and mean range of flexion improved from 79.8° (65° to 95°) to 116° (80° to 130°) (p < 0.001). There were no statistically significant differences in ROM or functional outcome scores at three months, one year, or two years between those who required MUA and those who did not. There were no complications associated with manipulation. At most recent follow-up, patients requiring MUA achieved equivalent ROM and clinical outcome scores when compared with a matched control group. While other studies have focused on ROM after manipulation, the current study adds to current literature by supplementing this with functional outcome scores., (©2015 The British Editorial Society of Bone & Joint Surgery.)

We compared the 10-year survival rates and clinical outcomes of posterior cruciate-retaining (CR) versus posterior cruciate-substituting (CS) total knee arthroplasty (TKA), using the Genesis II knee system (Smith and Nephew, Memphis, TN). Our institutional database identified patients undergoing a primary knee with the Genesis II system between 1995 and 2000. These patients were followed for an average of 12.3years (range 10.2-14.4years). There were 143 (34.5%) CR and 271 (65.5%) CS implants. No significant difference in 10-year survivorship was noted between the two cohorts. The postoperative clinical scores (KSCRS, WOMAC, SF-12) and knee ROM were significantly better for the CS cohort. In this large, long-term, single-implant prospective study, CS performed better than CR in terms of clinical scores and range of motion., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Total knee arthroplasty is a common and immensely successful surgical procedure that reliably relieves pain and improves function. However, early revision rates and patient dissatisfaction are high suggesting that there is need for improvement through careful patient selection and education as well as attention to surgical technique. After ensuring that a patient is an appropriate candidate for the procedure, patient education is critical to ensure appropriate expectations. Careful preoperative planning and achieving appropriate alignment, sizing, and ligament balance are critical for optimal knee function. Careful attention to the cement technique is important for long-term implant fixation. With appropriate patient selection and careful surgical techniques, optimal patient outcomes will be achieved.

This was a retrieval analysis of 83 PS inserts to assess the effect of limb alignment, implant position and joint line position on the pattern of wear in posterior stabilized (PS) tibial inserts. The total damage score was significantly higher in knees with postoperative varus alignment more than 3° (P = 0.03). The total damage score to the post was significantly more in knees with joint line elevation more than 5 mm (9.7 ± 3.9, compared to 6.5 ± 3.7 in knees with less joint line elevation) (P = 0.05). Limb malalignment and joint line elevation resulted in more damage in PS inserts. An external rotation subluxation damage pattern was found in joint line elevation., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Purpose: The ability to accurately measure joint kinematics is an important tool in studying both normal joint function and pathologies associated with injury and disease. The purpose of this study is to evaluate the efficacy, accuracy, precision, and clinical safety of measuring 3D joint motion using a conventional flat-panel radiography system prior to its application in an in vivo study., Methods: An automated, image-based tracking algorithm was implemented to measure the three-dimensional pose of a sparse object from a two-dimensional radiographic projection. The algorithm was tested to determine its efficiency and failure rate, defined as the number of image frames where automated tracking failed, or required user intervention. The accuracy and precision of measuring three-dimensional motion were assessed using a robotic controlled, tibiofemoral knee phantom programmed to mimic a subject with a total knee replacement performing a stair ascent activity. Accuracy was assessed by comparing the measurements of the single-plane radiographic tracking technique to those of an optical tracking system, and quantified by the measurement discrepancy between the two systems using the Bland-Altman technique. Precision was assessed through a series of repeated measurements of the tibiofemoral kinematics, and was quantified using the across-trial deviations of the repeated kinematic measurements. The safety of the imaging procedure was assessed by measuring the effective dose of ionizing radiation associated with the x-ray exposures, and analyzing its relative risk to a human subject., Results: The automated tracking algorithm displayed a failure rate of 2% and achieved an average computational throughput of 8 image frames/s. Mean differences between the radiographic and optical measurements for translations and rotations were less than 0.08 mm and 0.07° in-plane, and 0.24 mm and 0.6° out-of-plane. The repeatability of kinematics measurements performed using the radiographic tracking technique was better than ±0.09 mm and 0.12° in-plane, and ±0.70 mm and ±0.07° out-of-plane. The effective dose associated with the imaging protocol used was 15 μSv for 10 s of radiographic cine acquisition., Conclusions: This study demonstrates the ability to accurately measure knee-joint kinematics using a single-plane radiographic measurement technique. The measurement technique can be easily implemented at most clinical centers equipped with a modern-day radiographic x-ray system. The dose of ionizing radiation associated with the image acquisition represents a minimal risk to any subjects undergoing the examination.

Background: TKA and unicompartmental knee arthroplasty (UKA) are both utilized to treat unicompartmental knee arthrosis. While some surgeons assume UKA provides better function than TKA, this assumption is based on greater final outcome scores rather than on change in scores and many patients with UKA have higher preoperative scores., Questions/purposes: We therefore asked whether TKA would demonstrate (1) better change in clinical outcome scores from preoperative to postoperative states and (2) better survivorship than UKA., Methods: We evaluated 4087 patients with 5606 TKAs and 179 patients with 279 UKAs performed between 1978 and 2009. Patients with TKA were older and heavier than patients with UKA (mean age, 68 versus 66 years; mean BMI, 32 versus 29). We compared preoperative, latest postoperative, and change in Knee Society Clinical Rating System (KSCRS), SF-12, and WOMAC scores. Minimum followup was 2 years (UKA: mean, 7 years; range, 2.0-23 years; TKA: mean, 6.5 years; range, 2.0-33 years). Preoperative outcome measure scores (WOMAC, SF-12, KSCRS) were higher in the UKA group., Results: Patients with UKA had higher postoperative KSCRS and SF-12 mental scores. Changes in score for all WOMAC domains were similar between groups. Total KSCRS changes in score were similar between groups, although patients with TKA had higher knee scores (49 versus 43) but lower function scores than UKA (21 versus 26). Cumulative revision rate was higher for UKA than for TKA (13% versus 7%). Kaplan-Meier survivorship at 5 and 10 years was 95% and 90%, respectively, for UKA and 98% and 95%, respectively, for TKA., Conclusions: While patients with UKA had higher pre- and postoperative scores than patients with TKA, the changes in scores were similar in both groups and survival appeared higher in patients with TKA.

Osteoarthritic human synovial fluid was obtained from the knees of 20 patients and was compared with four different calf sera solutions frequently used as lubricants in knee simulator wear testing. Assuming that the fluid after arthroplasty was the same as the fluid in patients with osteoarthritis, the total protein concentration, protein constituent fractions, osmolality, trace element concentrations, and the thermal stability obtained via differential scanning calorimetry were determined. Human synovial fluid, with an average total protein concentration of 34 g/L, was significantly different from all undiluted calf sera. However, alpha-calf serum and iron-supplemented alpha-calf serum were closest in protein constituent fractions (albumin, alpha-1-globulin, alpha-2-globulin, ss-globulin, and gamma-globulin) to human synovial fluid. Diluting calf sera with low-ion distilled water to a total protein concentration of 17 g/L (as recommended by ISO 14243) produced non-clinically relevant total protein concentration and osmolality levels. Performing the same dilution of iron-supplemented alpha-calf serum with phosphate-buffered saline solution and 1.5 g/L hyaluronic acid produced an artificial lubricant with both a clinically relevant level of osmolality and clinically relevant thermal stability as seen in human synovial fluid from patients with osteoarthritis. The present study suggested that alpha-calf serum, phosphate-buffered saline solution and hyaluronic acid were essential constituents of an artificial lubricant to mimic the major biochemical properties of human synovial fluid for simulator wear testing of total knee replacements., ((c) 2010 Wiley Periodicals, Inc.)

Unlabelled: The range of motion after TKA depends on many patient, surgical technique, and implant factors. Recently, high-flexion designs have been introduced as a means of ensuring or gaining flexion after TKA. We therefore evaluated factors affecting postoperative flexion to determine whether implant design influences longterm flexion. We prospectively collected data on patients receiving a primary Genesis II total knee replacement with a minimum of 1-year followup (mean, 5.4 years; range, 1-13 years). We recorded pre- and postoperative outcome measures, patient demographics, and implant design (cruciate retaining [CR, n = 160], posterior stabilized [PS, n = 1177], high-flex posterior stabilized [HF-PS, n = 197]). Backward stepwise linear regression modeling identified the following factors affecting postoperative flexion: preoperative flexion, gender, body mass index, and implant design. Independent of gender, body mass index, and preoperative flexion, patients who received a HF-PS and PS design implant had a mean of 8 degrees and 5 degrees more flexion, respectively, than those who received a CR implant. Patients with low flexion preoperatively (<100 degrees) were more likely to gain flexion, whereas those with high flexion preoperatively (>120 degrees) were most likely to maintain or lose flexion postoperatively. Controlling for implant design, patients with high flexion preoperatively (>120 degrees) were more likely to gain flexion with the HF-PS design implant (HF-PS = 32.0%; PS = 15.1%; CR = 4.5%)., Level of Evidence: Level II, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Unlabelled: Medial unicompartmental arthroplasties (UKA) are available with mobile- and fixed-bearing designs, with the advantages of one bearing over another unproven. We questioned whether the bearing design influenced clinical outcome, survivorship, the reason for revision, or the timing of failures. We retrospectively reviewed 179 patients (229 knees) who had medial unicompartmental knee arthroplasties between 1990 and 2007; of these 79 knees had a mobile-bearing design and 150 knees a fixed-bearing design. Patients with mobile-bearing UKA had a minimum followup of 1 year (mean, 3.6 years; range, 1-11.3 years); those with fixed-bearing UKA a minimum followup of 1 year (mean, 8.1 years; range, 1-17.8 years). Patients were evaluated with clinical outcome scores and radiographically using the Knee Society rating system. Seven of 79 (9%) mobile-bearing knees underwent revision at a mean of 2.6 years, and 22 of 150 (15%) fixed-bearing knees underwent revision at a mean of 6.9 years. The 5-year cumulative survival rates were 88% (SE +/- 0.47, 95% CI 0.7229-1) and 96% (SE +/- 0.16, 95% CI 0.93-0.9979) for the mobile- and fixed-bearing designs respectively using the endpoint of revision surgery. We observed no differences in the indications or complexity of revision surgery between the groups and none in midterm survivorship., Level of Evidence: Level III, comparative study. See Guidelines for Authors for a complete description of levels of evidence.

This study investigated the change in joint line position after posterior cruciate-retaining and posterior-stabilized total knee arthroplasty with AMK (DePuy, Warsaw, Ind) and Genesis II (Smith & Nephew, Memphis, Tenn) components. A total of 200 primary total knee arthroplasty patients were randomly selected so as to have 50 patients with each of the 4 prosthesis types. Joint line position was measured on preoperative and 2 year postoperative radiographs by both a lateral and an anteroposterior measurement method. Two-year follow-up functional data were assessed. There were no statistically significant differences in the joint line elevation between posterior-stabilized and posterior cruciate-retaining designs within the same implant system as measured on lateral radiographs. There were no differences in clinical functional outcomes in patients with variable joint line elevation.

The purpose of this study is to compare the range of motion and clinical outcomes of a standard posterior-stabilized (PS) vs the high-flex (HF) polyethylene tibial insert of a posterior cruciate substituting total knee arthroplasty system. One hundred patients were entered into a prospective, blinded, randomized clinical trial in which 50 patients received a Genesis II PS insert and 50 patients received a Genesis II HF insert (Smith & Nephew, Memphis, TN). At an average follow-up of 2.7 years (range, 2.3-3.1 years), there were no differences in any outcome measures (Western Ontario and McMaster Universities osteoarthritis index, Short-Form 12, Knee Society clinical rating scores, anterior knee pain). There were no differences (P = .811) in average knee flexion at 2 years (standard, 123 degrees +/- 7 degrees; HF, 124 degrees +/- 7 degrees). In summary, this prospective blinded randomized clinical trial demonstrated no differences between a PS and HF polyethylene design. Long-term evaluation will be required to comment on differences in polyethylene wear and implant longevity.

The ideal method of stem fixation in revision knee arthroplasty is controversial with advantages and disadvantages for cemented and press-fit designs. Studies have suggested cemented revision knee stems may provide better long-term survival. The aim of this study was to report our experience with press-fit uncemented stems and metaphyseal cement fixation in a selected series of patients undergoing revision total knee arthroplasty. One hundred twenty-seven patients (135 knees) who underwent revision total knee arthroplasty using a press-fit technique (press-fit diaphyseal fixation and cemented metaphyseal fixation) were reviewed. Minimum followup was 2 years (mean, 5 years; range, 2-12 years). A Kaplan-Meier survivorship analysis using an end point of revision surgery or radiographic loosening was used to determine probability of survival at 5 and 10 years. Of the 127 patients (135 knees), 31 patients (36 knees) died and two patients (two knees) were lost to followup. Six patients (six knees) had revisions at a mean of 3.5 years (range, 1-8 years). Kaplan-Meier survivorship analysis revealed a probability of survival free of revision for aseptic loosening of 98% at 12 years. Survivorship of press-fit stems for revision knee arthroplasty is comparable to reported survivorship of cemented stem revision knee arthroplasty. Radiographic analysis has shown continued satisfactory appearances regardless of constraint, stem size, and augmentations.