Search

Purpose: The purpose of this study was to three-dimensionally analyse the size and shape of the femoral posterior condyles of the normal knee., Methods: A total of 62 healthy Japanese volunteers (37 males and 25 females) providing a sample of 124 normal knee joints, who had no knee-related symptoms and no history of major trauma, underwent computed tomography scans of the bilateral femur and tibia. Three-dimensional digital models of the femur were constructed from computed tomography data using visualisation and modelling software. The following parameters were evaluated: (1) the radii of the posterior condyles approximated to spheres and (2) the inclination angle of the posterior condyles in the coronal plane of the femoral coordinate system., Results: The radii of the medial and lateral condyles approximated to spheres were 17.0 ± 1.6 and 17.1 ± 1.8 mm, respectively and were not different. The inclination angles of the medial and lateral condyles in the coronal plane were - 0.6° ± 4.6° and 9.7° ± 5.7°, respectively. The medial condyle was almost vertical, whereas the lateral one was medially tilted., Conclusions: This study found an asymmetrical inclination between medial and lateral condyles. This may be related to the asymmetrical motion of the knee, which is known as medial pivot motion. This finding provides valuable morphological information and may be useful for implant designs for total knee arthroplasty., Level of Evidence: IV.

Background: Patellar tendon autograft after intraoperative extracorporeal radiotherapy has been used for reconstruction of the extensor mechanism following limb-sparing wide tumor resection around the knee. The purpose of this study was to determine the clinical outcome of this reconstruction technique., Methods: We retrospectively reviewed six consecutive patients with peripatellar tendon and proximal tibial sarcoma who underwent reconstruction of the knee extensor mechanism. The resection area was planned to be contained with the patellar tendon in order to obtain a wide margin. First, the patella was osteotomized at the midline, and the inferior half of patella, patellar tendon, and tibial tuberosity were excised en bloc. The resected segments were devitalized with intraoperative extracorporeal radiotherapy and reimplanted into the original site. A follow-up evaluation included an assessment of the range of motion, extensor lag, the International Society of Limb Salvage score, and complications., Results: Six patients were followed up for 121-270 months. One patient underwent an additional reconstruction with total knee arthroplasty due to a collapse of the tibial subchondral bone. A supracondylar fracture of the femur occurred in two patients, and a delayed union of the osteosynthesis site of the tibial shaft was observed in one patient. At the latest follow up, extensor lag had a median of five degrees, and International Society of Limb Salvage scores had a median of 83%. No local recurrence or rupture of the patellar tendon was observed., Conclusions: Reconstruction of the knee extensor mechanism using a patellar tendon treated with intraoperative radiotherapy is a reliable and successful method., Competing Interests: Declaration of competing interest No benefits in any form have been received or will be received from a commercial party related directly or indirectly to the subject of this article., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: We assessed the morphological differences in the knee joint related to knee rotation angle in patients with hip dysplasia. These results may explain the anatomy of the knee in patients with hip dysplasia and aid in planning knee surgery., Methods: We enrolled 73 women (146 legs, 35.6 ± 9.0 years) with bilateral hip dysplasia and 45 healthy women (90 legs, 49.0 ± 18.9 years) without lumbago, knee symptoms, or osteoarthritic findings of the knee or spine on plain radiographs. We examined the parameters affecting knee rotation angle, such as the condylar twist angle and femoral condyle measurements with a three-dimensional bone model using the correlation coefficients of each parameter., Results: The condylar twist angle and the length of the posterior part of the lateral femoral condyle were statistically positively correlated with knee rotation angle in both the normal (condylar twist angle: r = 0.286, p = 0.007, posterolateral: r = 0.429, p < 0.001) and developmental dysplasia of the hip groups (condylar twist angle: r = 0.230, p = 0.033, posterolateral: r = 0.272, p = 0.005). Knee rotation angle had no statistical correlation with femoral neck anteversion in the developmental dysplasia of the hip group (r = 0.094, p = 0.264), but had a statistical correlation with femoral neck anteversion in the normal group (r = 0.243, p = 0.039)., Conclusions: Knee joint morphology is affected by hip dysplasia. We found that the length of the posterior part of the lateral femoral condyle was significantly positively correlated with knee rotation angle in both the normal and developmental dysplasia of the hip groups, and this finding indicates that a greater posterolateral dimension was associated with a greater knee rotation angle. These morphological knee joint differences in patients with hip dysplasia may help determine the alignment of prostheses in total knee arthroplasty.

Purpose: Abnormalities of lower extremity alignment (LEA) in recurrent patella dislocation (RPD) have been studied mostly by two-dimensional (2D) procedures leaving three-dimensional (3D) factors unknown. This study aimed to three-dimensionally examine risk factors for RPD in lower extremity alignment under the weight-bearing conditions., Methods: The alignment of 21 limbs in 15 RPD subjects was compared to the alignment of 24 limbs of 12 healthy young control subjects by an our previously reported 2D-3D image-matching technique. The sagittal, coronal, and transverse alignment in full extension as well as the torsional position of the femur (anteversion) and tibia (tibial torsion) under weight-bearing standing conditions were assessed by our previously reported 3D technique. The correlations between lower extremity alignment and RPD were assessed using multiple logistic regression analysis. The difference of lower extremity alignment in RPD between under the weight-bearing conditions and under the non-weight-bearing conditions was assessed., Results: In the sagittal and coronal planes, there was no relationship (statistically or by clinically important difference) between lower extremity alignment angle and RPD. However, in the transverse plane, increased external tibial rotation [odds ratio (OR) 1.819; 95% confidence interval (CI) 1.282-2.581], increased femoral anteversion (OR 1.183; 95% CI 1.029-1.360), and increased external tibial torsion (OR 0.880; 95% CI 0.782-0.991) were all correlated with RPD. The tibia was more rotated relative to femur at the knee joint in the RPD group under the weight-bearing conditions compared to under the non-weight-bearing conditions (p < 0.05)., Conclusions: This study showed that during weight-bearing, alignment parameters in the transverse plane related to the risk of RPD, while in the sagittal and coronal plane alignment parameters did not correlate with RPD. The clinical importance of this study is that the 3D measurements more directly, precisely, and sensitively detect rotational parameters associated with RPD and hence predict risk of RPD., Level of Evidence: III.

Background: This study aimed to identify the factors affecting postoperative rotational limb alignment of the tibia relative to the femur. We hypothesized that not only component positions but also several intrinsic factors were associated with postoperative rotational limb alignment., Methods: This study included 99 knees (90 women and 9 men) with a mean age of 77 ± 6 years. A three-dimensional (3D) assessment system was applied under weight-bearing conditions to biplanar long-leg radiographs using 3D-to-2D image registration technique. The evaluation parameters were (1) component position; (2) preoperative and postoperative coronal, sagittal, and rotational limb alignment; (3) preoperative bony deformity, including femoral torsion, condylar twist angle, and tibial torsion; and (4) preoperative and postoperative range of motion (ROM)., Results: In multiple linear regression analysis using a stepwise procedure, postoperative rotational limb alignment was associated with the following: (1) rotation of the component position (tibia: β = 0.371, P < .0001; femur: β = -0.327, P < .0001), (2) preoperative rotational limb alignment (β = 0.253, P = .001), (3) postoperative flexion angle (β = 0.195, P = .007), and (4) tibial torsion (β = 0.193, P = .010)., Conclusion: In addition to component positions, the intrinsic factors, such as preoperative rotational limb alignment, ROM, and tibial torsion, affected postoperative rotational limb alignment. On a premise of correct component positions, the intrinsic factors that can be controlled by surgeons should be taken care. In particular, ROM is necessary to be improved within the possible range to acquire better postoperative rotational limb alignment., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Introduction: Instability after total knee arthroplasty is a critical problem. The purpose of this study was to clarify the stability of implanted knees during walking by comparing differences in dynamic instability during knee acceleration between individuals with or without previously experienced subjective instability, as measured by self-reported questionnaire., Materials and Methods: We examined 92 knees with medial pivot implants. Mean patient age and follow-up duration were 78.4 years and 32.8 months, respectively. An accelerometer was used to investigate the accelerations along three axes; that is, vertical (VT), mediolateral (ML), and anteroposterior (AP) directions in 3-dimensional (3D) space. The analysis in the stance phase and gait cycle was performed by: (1) root mean square (RMS) values of acceleration and (2) frequency domain analysis using fast Fourier transformation (FFT). A self-reported knee instability score was used for the subjective feeling of instability., Results: A total of 76 knees did not feel unstable (group 0), but 16 knees felt unstable (group 1) in patients during activities of daily living. Regarding the RMS, there were no differences in each direction between the groups. For FFT, the cumulative amplitude in the frequency < 30 Hz also showed no significant differences in all directions between the groups during the stance phase (VT, p = 0.335; ML, p = 0.219; AP, p = 0.523) or gait cycle (VT, p = 0.077; ML, p = 0.082; AP, p = 0.499)., Discussion: Gait analysis based on the acceleration data showed that there were no between-group differences in objective dynamic instability during acceleration of the knee, with or without reports of previously experienced subjective instability, as assessed by the self-reported questionnaire.

Purpose: Flexion instability following total knee arthroplasty (TKA) is a common indication of early revision. The association between the objective anteroposterior (AP) laxity direction in mid-range flexion and the subjective healing of instability remains unclear; thus, this study aimed to clarify this association., Methods: In this study, 110 knees (74 females, 92 knees; 16 males, 18 knees) with medial pivot implants were examined with a median age of 79 (range 60-92) years for a median follow-up duration of 22 (range 6-125) months. AP laxity was measured using a KT-1000 arthrometer. Self-reported knee instability score was used for the subjective healing of instability., Results: Eighty-seven knees did not feel unstable (Group 0), whereas 23 knees felt unstable (Group 1). There was a significant difference in AP displacement [Group 0: median 6 mm; range 2-15 mm and Group 1: median 8 mm; range 4-14; p < 0.0001]. The threshold value of 7 mm was determined using the area under receiver operating characteristic curve of 0.79 [95% confidence interval (CI) 0.69-0.88, p < 0.0001]. In multivariate analysis, AP displacement of ≥7 mm was an independent risk factor for feelings of instability (odds ratio 7.695; 95% CI 2.306-25.674; p = 0.001)., Conclusions: AP laxity of ≥7 mm represents a known cause of feelings of instability. By controlling AP laxity in TKAs, without stiffness in the knee, it is possible to prevent feelings of instability. The clinical relevance is that AP laxity of <7 mm is one of the target areas in TKA., Level of Evidence: IV.

Introduction: The relative torsional angle of the distal tibia is dependent on a deformity of the proximal tibia, and it is a commonly used torsional parameter to describe deformities of the tibia; however, this parameter cannot show the location and direction of the torsional deformity in the entire tibia. This study aimed to identify the detailed deformity in the entire tibia via a coordinate system based on the diaphysis of the tibia by comparing varus osteoarthritic knees to healthy knees., Methods: In total, 61 limbs in 58 healthy subjects (age: 54 ± 18 years) and 55 limbs in 50 varus osteoarthritis (OA) subjects (age: 72 ± 7 years) were evaluated. The original coordinate system based on anatomic points only from the tibial diaphysis was established. The evaluation parameters were 1) the relative torsion in the distal tibia to the proximal tibia, 2) the proximal tibial torsion relative to the tibial diaphysis, and 3) the distal tibial torsion relative to the tibial diaphysis., Results: The relative torsion in the distal tibia to the proximal tibia showed external torsion in both groups, while the external torsion was lower in the OA group than in the healthy group (p < 0.0001). The proximal tibial torsion relative to the tibial diaphysis had a higher external torsion in the OA group (p = 0.012), and the distal tibial torsion relative to the tibial diaphysis had a higher internal torsion in the OA group (p = 0.004) in comparison to the healthy group., Conclusion: The reverse torsional deformity, showing a higher external torsion in the proximal tibia and a higher internal torsion in the distal tibia, occurred independently in the OA group in comparison to the healthy group. Clinically, this finding may prove to be a pathogenic factor in varus osteoarthritic knees., Level of Evidence: Level Ⅲ., (Copyright © 2017 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.)

Background: Anterior cruciate ligament (ACL) injury often leads to symptoms of instability, which may cause meniscus injury, osteochondral lesions, and degenerative changes. For thorough evaluation of the effects of abnormal motion of ACL-deficient (ACLD) knees on the meniscus and articular cartilage, it is necessary to assess tibiofemoral motion in the medial and lateral compartments separately. Our aim was to determine if in vivo three-dimensional (3D) dynamic motion of ACLD knees differs from that of contralateral uninjured knees by assessing knee motion in the medial and lateral compartments respectively., Methods: A total of 22 patients with an isolated ACL-injured knee were examined. 3D to two-dimensional registration was used to determine 3D knee motion during squatting from full knee extension to full flexion for both ACLD and contralateral uninjured knees. The knee motion was evaluated by the movement of the geometric center axis of the femur projected onto the tibial axial plane., Results: In ACLD knees the lateral femoral condyle was located significantly more posteriorly during nearly full extension than in contralateral uninjured knees. The range of anteroposterior translation of the medial femoral condyle was significantly greater than those of contralateral uninjured knees. Almost all of the contralateral uninjured knees demonstrated medial pivot motion, while the ACLD knees showed higher variance., Conclusions: The ACLD knees exhibited a motion pattern different from those of contralateral uninjured knees with higher variance. During nearly full extension of the ACLD knees, the lateral femoral condyle translated posteriorly and the screw-home movement seemed to be impaired. The ACL might have an important role in maintaining normal knee function, especially during the early flexion phase. The larger range of anteroposterior translation of the medial femoral condyle in ACLD knees may be associated with a risk of secondary meniscal injury and degenerative change in the articular cartilage., Level of Evidence: Level IV., (Copyright © 2015 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.)

Background: Relationship malalignment of the knee and the onset of knee OA are unclear. Moreover, it has not been clarified whether malalignment of the knee affects the morphological change of the proximal tibia. The purpose of current study was to investigate whether varus knee alignment and morphological change of the proximal medial tibia influence the onset of medial knee OA and to clarify the relationship between them., Methods: The subjects comprised 736 knees from 390 women that went under both the first survey in 1979 and the fourth survey in 2000 in the Matsudai district in Niigata Prefecture in Japan. None of the subjects demonstrated radiographic knee OA at the first survey. OA was graded according to the Kellgren-Lawrence classification and the subjects were divided according to the OA grades in the forth survey into the 3 groups (non-OA, early OA, and advanced OA). Age, BMI, Femorotibial angle (FTA), the tibial plateau angle and medial tibial cortical bone thickness (MTCBT) were measured. We performed multivariate logistic regression analysis using the stepwise method to identified the risk factors regarding onset of knee OA and calculated the odds ratio (OR) and 95% confidence intervals (95% CI)., Results: Advanced OA had a significantly higher OR compared to non-OA in 1979 with the tibial plateau angle (OR: 1.15) and MTCBT (OR: 2.11). And also advanced OA had a significantly higher OR compared to early-OA in 1979 with the tibial plateau angle (OR: 1.17) and MTCBT (OR: 1.62)., Conclusions: In the advanced OA, varus alignment of the proximal tibia had already existed before the onset of knee OA. In addition, we thought that varus alignment due to the proximal tibia had influenced the morphologic alterations of proximal medial tibia., (Copyright © 2015 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.)

Purpose: The purpose of this study was to investigate the hypothesis that a medial unicompartmental knee arthroplasty might restore the functional flexion axis of a knee to normal. The flexion axis can be indirectly identified by tracking the vertical translation of anatomic landmarks that basically move around the flexion axis during a knee motion. If a unicompartmental knee could help restore the normal flexion axis, the anatomic landmarks after the arthroplasty would show the vertical translation similar to those of normal knees during a knee flexion., Methods: While performing a squatting motion, the kinematics of 17 knees were determined before and after a medial unicompartmental arthroplasty to calculate the vertical translation of a clinical epicondylar axis, using a three- to two-dimensional registration technique through a single-plane fluoroscopic system incorporating a biplanar static radiography. The results were compared with a normal data, and a statistical analysis including a two-way repeated-measured analysis of variance was performed., Results: For the medial end, from 10° to 100° knee flexion, normal, osteoarthritic, and unicompartmental knees had the average superior vertical translation of 7.3 ± 4.2, 4.3 ± 7.2, and 2.4 ± 3.1 mm, respectively, with statistical significance between normal and unicompartmental knees (p < 0.001). The vertical translation did not return to normal post-implantation., Conclusions: A unicompartmental knee could not reproduce the normal flexion axis. As for clinical relevance, the changes of the implant design and surgical procedure may be necessary to obtain the normal flexion axis reproducing a normal motion., Level of Evidence: IV.

Purpose: It is common to assert that restoration of normal knee kinematics is essential for the best functional result after knee arthroplasty. Previous studies using the progression of the geometric centre axis have suggested that kinematics after unicompartmental arthroplasty is markedly different from the normal. For this study, the transepicondylar axis was used because this axis is closer to the flexion axis and should be a better reference for motion. The following hypothesis was tested: the transepicondylar axis would again show that the postoperative kinematics does not restore normal motion and is closer to that before replacement., Methods: Seventeen osteoarthritic knees were tested before and after unicompartmental arthroplasty using a three-dimensional to two-dimensional registration technique tracking the transepicondylar axis to calculate translation and rotation of this axis. Results were compared for the seventeen knees before and after arthroplasty and were compared to the normal knee as measured in our previous study., Results: Similar motion patterns in the pre- and postoperative knees were shown but both the pre- and postoperative motion were markedly different from the normal knee., Conclusions: This result supported our hypothesis. The clinical relevance is that medial unicompartmental arthroplasty cannot restore the motion of the knee to normal in the living knee. Therefore, it would be expected that the patient for unicompartmental knee might not feel normal. It may not be possible depending on ligaments alone to restore the knee to normal, and the changes in the articular shapes and the surgical procedure may also be necessary.

Background: Rotational mismatch between femoral and tibial components has been recognized as a risk factor of unsuccessful total knee arthroplasty (TKA), but a main cause of rotational mismatch is uncertain. This study aims to evaluate rotational alignment of the knee by measuring both component rotation and version of the knee in TKA., Method: Fifty-one TKAs (mean age 73.7 years) were included in this study. The three dimensional, weight-bearing knee alignment was measured before and after TKA. A transepicondylar axis was referenced to femoral component rotation, and an anteroposterior axis of the tibia (middle of posterior cruciate ligament attachment to medial border of patella tendon attachment) was referenced to tibial component rotation. Knee rotational angle was defined as the angle between these two axes., Result: The mean preoperative knee rotation angle of 9.7° (±8.5°) internal rotation was significantly reduced to 1.8° (±7.3°) external rotation after TKA. Twenty-one of 51 knees (41%) exhibited rotational mismatch (>10°) preoperatively, and this number was reduced to eight knees (16%) post-TKA. The femoral component was rotationally aligned within 5° of neutral in all knees, while rotational alignment of the tibial component showed a high degree of variability (range 20.7° internal rotation to 17.2° external rotation)., Conclusion: Rotational malposition of the tibial component was considered to be a main factor of rotational mismatch of the knee after TKA.

Background: The functional flexion axis (FFA) is the principal axis around which the knee moves and thus, by definition, does not move in vertical displacement relative to the tibia. The transepicondylar axis (TEA) has been reported to coincide with the FFA. If that is not true, the TEA should show vertical displacement during motion, and this hypothesis was investigated., Methods: Three-dimensional knee kinematics of 20 healthy volunteers were determined during a squatting motion via a 3-dimensional to 2-dimensional image registration technique by calculating the vertical displacement of the clinical epicondylar axis (CEA) through the full range of motion., Results: From 0° to 90° knee flexion, the average vertical displacement of the lateral end of the CEA was <3 mm, whereas that of the medial end was large (7.6 mm)., Discussion: The large vertical displacement of the medial end of the CEA suggests that the CEA is not the FFA. This finding implies that the CEA may not be an appropriate axis for a TKA prosthesis having a "single radius" design., Evidence Level: Level IV.

Purpose: The transepicondylar axis (TEA) has been used as a flexion axis of the knee and a reference of the rotational alignment of the femoral component. However, no study has showed dynamic normal knee kinematics employing TEA as the evaluation parameter throughout the full range of motion in vivo. The purpose of this study was to analyze dynamic kinematics of the normal knee through the full range of motion via the 3-dimensional to 2-dimensional registration technique employing TEA as the evaluation parameter., Methods: Dynamic motion of the right knee was analyzed in 20 healthy volunteers (10 female, 10 male; mean age 37.2 years). Knee motion was observed as subjects squatted from standing with knee fully extended to maximum flexion. The following parameters were determined: (1) Anteroposterior translations of the medial and lateral ends of the TEA; and (2) changes in the angle of the TEA on the tibial axial plane (rotation angle)., Results: The medial end of the TEA demonstrated anterior translation (3.6 ± 3.0 mm) from full extension to 30° flexion and demonstrated posterior translation (18.1 ± 3.7 mm) after 30°, while the lateral end of the TEA demonstrated consistent posterior translation (31.1 ± 7.3 mm) throughout knee flexion. All subjects exhibited femoral external rotation (16.9 ± 6.2°) relative to the tibia throughout knee flexion., Conclusion: Compared to previously used parameters, the TEA showed bicondylar posterior translation from early flexion phase. These results provide control data for dynamic kinematic analyses of pathologic knees in the future and will be useful in the design of total knee prostheses.

Background: Pre- and postoperative knee kinematics in unicompartmental knee arthroplasty (UKA) can be theoretically related to clinical outcome and longevity after UKA with regard to ligament function and the degree of arthritic changes. However, the preoperative knee kinematics of patients indicated for UKA remain to be elucidated, and it is also unclear whether the preoperative kinematics can be maintained by the UKA procedure. The objective of this study was to examine the in vivo pre- and postoperative three-dimensional knee kinematics in UKA while referencing the normal knee kinematics reported in our previous study., Methods: We analyzed the knee kinematics in 17 knees (14 patients) undergoing UKA via a three-dimensional to two-dimensional registration technique employing femoral condylar translation and femoral axial rotation. The pre- and postoperative knee kinematics during squat motion were evaluated in the same subjects, employing consistent evaluation parameters., Results: On average, both pre- and postoperative knee kinematics in the range 10-100° of knee flexion demonstrated near-consistent femoral external rotation and anterior translation of the medial condyle and posterior translation of the lateral condyle. However, the mean femoral external rotation angle and the posterior translation of the lateral condyle postoperatively were significantly smaller than the values observed preoperatively., Discussion: Although the patterns of preoperative knee motion were similar to those seen in normal knees, the magnitude of this motion varied widely between patients, so it was not necessarily representative of normal knees. These variations may be due to the varying degrees of arthritic changes caused by osteoarthritis. Although the patterns of knee kinematics were largely maintained by the UKA procedure, the causes of the significant reductions in the magnitude of motion upon performing the UKA procedure should be investigated in subsequent studies with a larger number of patients.

Background: Analysis of the movement of anatomically defined reference axes at the femoral condyles relative to the tibia is appropriate for evaluating knee kinematics. However, such parameters have been previously employed only in studies utilizing stop-motion techniques. The purpose of this study was to evaluate in vivo dynamic kinematics for full range of motion in normal knees using the three-dimensional to two-dimensional registration technique and to compare them with previously reported normal knee kinematics obtained via stop-motion techniques., Methods: Dynamic motion of the right knee was analyzed in 20 healthy volunteers (10 female, 10 male; mean age 37.2 years). Knee motion was observed when subjects squatted from standing with the knee fully extended to maximum flexion. We determined the following parameters: (1) changes to angles of the geometric center axis (GCA) on the tibial axial plane (rotation angle); (2) anteroposterior translations of the medial and lateral ends of the GCA; and (3) motion patterns in each phase during knee flexion., Results: All subjects exhibited femoral external rotation (26.1°) relative to the tibia throughout knee flexion. The medial femoral condyle demonstrated anterior translation (5.5 mm) from full extension to 100° flexion, and demonstrated posterior translation (3.9 mm) after 100°, while the lateral femoral condyle demonstrated consistent posterior translation (15.6 mm) throughout knee flexion. All subjects showed medial pivot motion from full extension to nearly 120° flexion. From 120° flexion, bicondylar rollback motion was observed., Discussion: Although the behavior of the medial femoral condyle in our analysis differed somewhat from that seen in previous cadaver studies, the results obtained using dynamic analysis were generally equivalent to those obtained in previous studies employing stop-motion techniques. These results provide control data for future dynamic kinematic analyses of pathological knees.

Background: Although assessment of lower extremity alignment is important for the treatment and evaluation of diseases that present with malalignment of the lower extremity, it has generally been performed using only plain radiographs seen in two dimensions (2D). In addition, there is no consensus regarding the criteria for quantitative three-dimensional (3D) evaluation of the relative angle between the femur and tibia. The purpose of this study was to establish assessment methods and criteria for quantitatively evaluating lower extremity alignment in 3D and to obtain reference data from normal elderly subjects., Methods: The normal alignment of 82 limbs of 45 healthy elderly subjects (24 women, 21 men; mean age 65 years, range 60-81 years) was analyzed in 3D with regard to flexion, adduction-abduction, and rotational angle of the knee in the weight-bearing, standing position. The obtained computed tomography (CT) and biplanar computed radiography (CR) data were used to define several anatomical axes of the femur and tibia as references., Results: In the sagittal plane, the mean extension-flexion angle was significantly more recurvatum in women than in men. In the coronal plane, the mean 3D hip-knee-ankle angle was more varus by several degrees in this Japanese series than that in a Caucasian series reported previously. Regarding rotational alignment, the mean angle between the anteroposterior axis of the tibia and the transepicondylar axis of the femur in this series was slightly larger (externally rotated) than that of previously reported Japanese series examined in the supine position., Conclusions: These data are believed to represent important references for 3D evaluation of morbid lower extremity alignment in the weight-bearing, standing position and are important for biomechanical research (e.g., 3D analyses of knee kinematics) because the relative angles between the femur and tibia are assessed three-dimensionally.

Background: High tibial osteotomy (HTO) is an established surgical option for treating medial knee osteoarthritis. HTO moves the mechanical load on the knee joint from the medial compartment to the lateral compartment by changing the leg alignment, but the effects of the operation remain unclear. The purpose of this study was to evaluate the change in three-dimensional knee motion before and after HTO, focusing on lateral thrust and screw home movement, and to investigate the relationship between the change in knee motion and the clinical results., Methods: A series of 19 patients with medial knee osteoarthritis who had undergone HTO were evaluated. We performed a clinical assessment, radiological evaluation, and motion analysis at 2.4 years postoperatively. The clinical assessment was performed using the Japanese Orthopaedic Association knee score., Results: The score was significantly improved in all patients after operation. Motion analysis revealed that lateral thrust, which was observed in 18 of the 20 knees before operation, was reduced to 7 knees after operation. Regarding active terminal extension of the knee, three patterns of rotational movement were observed before operation: screw home movement (external rotation), reverse screw home movement (internal rotation), and no rotation. By contrast, after operation, only reverse screw home movement and no rotation were observed; the screw home movement disappeared in all patients. In the knees with reverse screw home movement after operation, the preoperative score was significantly lower than those in the knees with no rotation after operation., Conclusions: Kinetically, HTO was useful for suppressing lateral thrust in medial knee osteoarthritis, although the rotational movement of the knee joint was unchanged.

Load transmission through knee prostheses was examined to clarify how the tibial component behaves under dynamic loading conditions. We did Genesis II total knee arthroplasty using sawbones and measured impact load transmission ratios using the split-Hopkinson pressure bar technique. We also measured the polyethylene strain when an impact load was applied using a strain gauge bonded to the anterior surface of the polyethylene. The impact load transmission ratios of metal-backed and all-polyethylene tibial components were less than 4%. Greater load transmission was observed with metal-backed components, which suggests that some of the applied dynamic load is transferred directly to the tibial cortical bone. Increasing polyethylene thickness decreased impact load transmission ratios in both components, which might lower the cancellous bone stresses beneath tibial implants. Greater strain in the tibial component was observed in all-polyethylene components. Increased polyethylene thickness did not significantly decrease the polyethylene strain, probably because of the nonlinear elastic behavior of the polyethylene material. The distant positioning of the strain gauge may, however, have prevented the detection of local contact strains. Recent clinical studies did not confirm our theoretical predictions, suggesting that other factors contribute more significantly to the clinical outcome in current total knee arthroplasty.