Search

Dual-task walking and cell phone usage, which is associated with high cognitive load and reduced situational awareness, can increase risk of a collision, a fall event, or death. The objective of this study was to quantify the effect of dual-task cell phone talking, texting, and reading while walking on spatiotemporal gait parameters; minimum foot clearance; and dynamic stability of the lower limb joints, trunk, and head. Nineteen healthy male participants walked on an instrumented treadmill at their self-selected speed as well as walking while simultaneously (1) reading on a cell phone, (2) texting, and (3) talking on a cell phone. Gait analyses were performed using an optical motion analysis system, and dynamic stability was calculated using the Maximum Lyapunov Exponent. Dual-task cell phone usage had a significant destabilizing influence on the lower limb joints during walking. Cell phone talking while walking significantly increased step width and length and decreased minimum foot clearance height (P <.05). The findings suggest that dual-task walking and cell phone conversation may present a greater risk of a fall event than texting or reading. This may be due to the requirements for more rapid information processing and cognitive demand at the expense of motor control of joint stability. [ABSTRACT FROM AUTHOR]

Background: Glenohumeral joint contact loading before and after glenoid bone grafting for recurrent anterior instability remains poorly understood. Purpose: To develop a computational model to evaluate the influence of glenoid bone loss and graft positioning on graft and cartilage contact pressures after the Latarjet procedure. Study Design: Controlled laboratory study. Methods: A finite element model of the shoulder was developed using kinematics, muscle and glenohumeral joint loading of 6 male participants. Muscle and joint forces at 90° of abduction and external rotation were calculated and employed in simulations of the native shoulder, as well as the shoulder with a Bankart lesion, 10% and 25% glenoid bone loss, and after the Latarjet procedure. Results: A Bankart lesion as well as glenoid bone loss of 10% and 25% significantly increased glenoid and humeral cartilage contact pressures compared with the native shoulder (P <.05). The Latarjet procedure did not significantly increase glenoid cartilage contact pressure. With 25% glenoid bone loss, the Latarjet procedure with a graft flush with the glenoid and the humerus positioned at the glenoid half-width resulted in significantly increased humeral cartilage contact pressure compared with that preoperatively (P =.023). Under the same condition, medializing the graft by 1 mm resulted in humeral cartilage contact pressure comparable with that preoperatively (P =.097). Graft lateralization by 1 mm resulted in significantly increased humeral cartilage contact pressure in both glenoid bone loss conditions (P <.05). Conclusion: This modeling study showed that labral damage and greater glenoid bone loss significantly increased glenoid and humeral cartilage contact pressures in the shoulder. The Latarjet procedure may mitigate this to an extent, although glenoid and humeral contact loading was sensitive to graft placement. Clinical Relevance: The Latarjet procedure with a correctly positioned graft should not lead to increased glenohumeral joint contact loading. The present study suggests that lateral graft overhang should be avoided, and in the situation of large glenoid bone defects, slight medialization (ie, 1 mm) of the graft may help to mitigate glenohumeral joint contact overloading. [ABSTRACT FROM AUTHOR]

The purpose of this study was to define the normal thumb carpometacarpal joint kinematics in-vivo during opposition and abduction using four-dimensional computed-tomography in four volunteers. Movement of the metacarpal relative to the trapezium was quantified using both Euler and helical axis representations. Articular surface contact patterns were also analysed. The overall axis of rotation for the movement of opposition and abduction passes through the trapezium and the base of the proximal phalanx, respectively. An abrupt change in instantaneous axis of rotation at terminal opposition was found. Ligament modelling shows dorsoradial ligament becomes tauter towards terminal opposition, whereas anterior oblique ligament becomes more slack. These results support the existence of the ‘screw-home’ pivot at terminal opposition and the importance of the dorsoradial ligament for stability in this position. The normal reference set in this study can help establish a diagnostic tool for subtle carpometacarpal instability, or for evaluating efficacy of surgery. [ABSTRACT FROM AUTHOR]

The evaluation of three-dimensional occlusal loading during biting and chewing may assist in development of new dental materials, in designing effective and long-lasting restorations such as crowns and bridges, and for evaluating functional performance of prosthodontic components such as dental and/or maxillofacial implants. At present, little is known about the dynamic force and pressure distributions at the occlusal surface during mastication, as these quantities cannot be measured directly. The aim of this study was to evaluate subject-specific occlusal loading forces during mastication using accurate jaw motion measurements. Motion data was obtained from experiments in which an individual performed maximal effort dynamic chewing cycles on a rubber sample with known mechanical properties. A finite element model simulation of one recorded chewing cycle was then performed to evaluate the deformation of the rubber. This was achieved by imposing the measured jaw motions on a three-dimensional geometric surface model of the subject’s dental impressions. Based on the rubber’s deformation and its material behaviour, the simulation was used to compute the resulting stresses within the rubber as well as the contact pressures and forces on the occlusal surfaces. An advantage of this novel modelling approach is that dynamic occlusal pressure maps and biting forces may be predicted with high accuracy and resolution at each time step throughout the chewing cycle. Depending on the motion capture technique and the speed of simulation, the methodology may be automated in such a way that it can be performed chair-side. The present study demonstrates a novel modelling methodology for evaluating dynamic occlusal loading during biting or chewing. [ABSTRACT FROM AUTHOR]

Kinematics of the shoulder girdle obtained from non-invasive measurement systems such as video motion analysis, accelerometers and magnetic tracking sensors has been shown to be adversely affected by instrumentation measurement errors and skin motion artefact. The degree to which musculoskeletal model calculations of shoulder muscle and joint loading are influenced by variations in joint kinematics is currently not well understood. A three-dimensional musculoskeletal model of the upper limb was used to evaluate the sensitivity of shoulder muscle and joint force. Monte-Carlo analyses were performed by randomly perturbing scapular and humeral joint coordinates during abduction and flexion. Muscle and joint force calculations were generally most sensitive to changes in the kinematics of the humerus in elevation and of the scapula in medial-lateral rotation, and were least sensitive to changes in humerus plane of elevation and scapula protraction-retraction. Overall model sensitivity was greater during abduction than flexion, and the influence of specific kinematics perturbations varied from muscle to muscle. In general, muscles that generated greater force, such as the middle deltoid and subscapularis, were more sensitive to changes in shoulder kinematics. This study suggests that musculoskeletal model sensitivity to changes in kinematics is task-specific, and varies depending on the plane of motion. Calculations of shoulder muscle and joint function depend on reliable humeral and scapula motion data, particularly that of humeral elevation and scapula medial-lateral rotation. The findings in this study have implications for the use of kinematic data in musculoskeletal model development and simulations. [ABSTRACT FROM AUTHOR]

Joint angle quantification from inertial measurement units (IMUs) is commonly performed using kinematic modelling, which depends on anatomical sensor placement and/or functional joint calibration; however, accurate three-dimensional joint motion measurement remains challenging to achieve. The aims of this study were firstly to employ deep neural networks to convert IMU data to ankle joint angles that are indistinguishable from those derived from motion capture-based inverse kinematics (IK) - the reference standard; and secondly, to validate the robustness of this approach across contrasting walking speeds in healthy individuals. Kinematics data were simultaneously calculated using IMUs and IK from 9 subjects during walking on a treadmill at 0.5 m/s, 1.0 m/s and 1.5 m/s. A generative adversarial network was trained using gait data at two of the walking speeds to predict ankle kinematics from IMU data alone for the third walking speed. There were significant differences between IK and IMU joint angle predictions for ankle eversion and internal rotation during walking at 0.5 m/s and 1.0 m/s (p < 0.001); however, no significant differences in joint angles were observed between the generative adversarial network prediction and IK at any speed or plane of joint motion (p < 0.05). The RMS difference in ankle joint kinematics between the generative adversarial network and IK for walking at 1.0 m/s was 3.8°, 2.1° and 3.5° for dorsiflexion, inversion and axial rotation, respectively. The modeling approach presented for real-time IMU to ankle joint angle conversion, which can be readily expanded to other joints, may provide enhanced IMU capability in applications such as telemedicine, remote monitoring and rehabilitation. [ABSTRACT FROM AUTHOR]

Background Context: While burst fracture is a well-known cause of spinal canal occlusion with dynamic, axial spinal compression, it is unclear how such loading mechanisms might cause occlusion without fracture.Purpose: To determine how spinal canal occlusion during dynamic compression of the lumbar spine is differentially caused by fracture or mechanisms without fracture and to examine the influence of spinal level on occlusion.Study Design: A cadaveric biomechanical study.Methods: Twenty sets of three-vertebrae specimens from all spinal levels between T12 and S1 were subjected to dynamic compression using a hydraulic loading apparatus up to a peak velocity between 0.1 and 0.9 m/s. The presence of canal occlusion was measured optically with a high-speed camera. This was repeated with incremental increases of 4% compressive strain until a vertebral fracture was detected using acoustic emission measurements and computed tomographic imaging.Results: For axial compression without fracture, the peak occlusion (Omax) was 29.9±10.0%, which was deduced to be the result of posterior bulging of the intervertebral disc into the spinal canal. Omax correlated significantly with lumbar spinal level (p<.001), the compressive displacement (p<.001) and the cross-sectional area of the vertebra (p=.031).Conclusions: Spinal canal occlusion observed without vertebral fracture involves intervertebral disc bulging. The lower lumbar spine tended to be more severely occluded than more proximal levels.Clinical Significance: Clinically, intermittent canal occlusion from disc bulging during dynamic compression may not show any radiographic features. The lower lumbar spine should be a focus of injury prevention intervention in cases of high-rate axial compression. [ABSTRACT FROM AUTHOR]

Background: The efficacy of foot orthoses in reducing patellofemoral pain (PFP) is well documented; however, the mechanisms by which foot orthoses modulate pain and function are poorly understood.Research Question: This within-subject study investigated the immediate effects of foot orthoses on lower limb kinematics and angular impulses during level walking and stair ambulation in individuals with persistent PFP.Methods: Forty-two participants with persistent PFP (≥3 months duration) underwent quantitative gait analysis during level walking, stair ascent and stair descent while using: (i) standard running sandals (control); and (ii) standard running sandals fitted with prefabricated foot orthoses. Hip, knee, and ankle joint kinematics and angular impulses were calculated and statistically analyzed using paired t-tests (p < 0.05).Results: Relative to the control condition, foot orthoses use was associated with small but significant decreases in maximum ankle inversion angles during walking (mean difference [95% confidence interval]: -1.00° [-1.48 to -0.53]), stair ascent (-1.06° [-1.66 to -0.45]) and stair decent (-0.94° [-1.40 to -0.49]). Foot orthoses were also associated with decreased ankle eversion impulse during walking (-9.8Nms/kg [-12.7 to -6.8]), and decreased ankle dorsiflexion and eversion impulse during stair ascent (-67.6Nms/kg [-100.7 to -34.6] and -17.5Nms/kg [-23.6 to -11.4], respectively) and descent (-50.4Nms/kg [-77.2 to -23.6] and -11.6Nms/kg [-15.6 to -7.5], respectively). Ankle internal rotation impulse decreased when participants ascended stairs with foot orthoses (-3.3Nms/kg [-5.4 to -1.3]). Limited changes were observed at the knee and hip.Significance: In individuals with persistent PFP, small immediate changes in kinematics and angular impulses - primarily at the ankle - were observed when foot orthoses were worn during walking or stair ambulation. The clinical implications of these small changes, as well as the longer-term effects of foot orthoses on lower limb biomechanics, are yet to be determined. [ABSTRACT FROM AUTHOR]

Total temporomandibular joint (TMJ) replacement surgery aims to improve mandibular function, reduce pain and enhance quality of life in patients suffering from end-stage TMJ disorders. Traditional post-operative jaw evaluation is carried out using measurement of maximum interincisal opening distance; however, this can correlate poorly to joint function. The present study aimed to evaluate three-dimensional (3D) jaw motion during border movements and chewing in unilateral total TMJ replacement patients and healthy controls. Motion analysis experiments were performed on six unilateral total TMJ replacement patients and ten age-matched healthy controls. Subject-specific motion tracking plates worn by each participant were registered to CT scans of each participant's skull and mandible to enable anatomical mandibular kinematics measurement using an optoelectronic system. Participants performed 15 repetitions of maximal opening, protrusion, lateral excursions, and chewing cycles. Total TMJ replacement patients had significantly smaller incisal displacements at maximum mouth opening relative to the controls (median difference: 7.1 mm, p = 0.002) and decreased anterior translation of the prosthetic condyle (median difference: 10.5 mm, p = 0.002). When TMJ replacement subjects chewed using their contralateral molars, there was a significant increase in inferior condylar translation of the non-working condyle (median difference: 9.7 mm, p = 0.016). This study found that unilateral total TMJ replacement surgery was associated with mouth opening capacity within the range of healthy individuals, but reduced anterior movement of the prosthetic condyle and restricted protrusion and lateral excursions. The results provide future direction for prosthetic TMJ design to enhance postsurgical implant functionality and improve long-term clinical outcomes for prosthesis recipients. [ABSTRACT FROM AUTHOR]

Purpose: Lateral compartment osteoarthritis accompanied by abnormal knee biomechanics is frequently reported in individuals with knee osteoarthritis after anterior cruciate ligament reconstruction (ACLR). The aim of this study was to evaluate changes in knee biomechanics produced by an adjusted and unadjusted varus knee brace during high dynamic loading activities in individuals with lateral knee osteoarthritis after ACLR and valgus malalignment. Methods: Nineteen participants who had undergone ACLR 5 to 20 yr previously and had symptomatic and radiographic lateral knee osteoarthritis with valgus malalignment were assessed. Quantitative motion analysis experiments were conducted during hopping, stair ascent, and descent under three test conditions: (i) no brace, (ii) unadjusted brace with sagittal plane support and neutral frontal plane alignment, and (iii) adjusted brace with sagittal plane support and varus realignment (valgus to neutral). Sagittal, frontal, and transverse plane knee kinematics, external joint moment, and angular impulse data were calculated. Results: Relative to an unbraced knee, braced conditions significantly increased knee flexion and adduction angles during hopping (P = 0.003 and P = 0.005; respectively), stair ascent (P = 0.003 and P < 0.001, respectively), and descent (P = 0.009 and P < 0.001, respectively). In addition, the brace conditions increased knee flexion (P < 0.001) and adduction (P = 0.001) angular impulses and knee stiffness (P < 0.001) during hopping, as well as increased knee adduction moments during stair ascent (P = 0.008) and flexion moments during stair descent (P = 0.006). There were no significant differences between the adjusted and the unadjusted brace conditions (P > 0.05). Conclusion: A knee brace, with or without varus alignment, can modulate knee kinematics and external joint moments during hopping, stairs ascent, and descent in individuals with predominant lateral knee osteoarthritis after ACLR. Longer-term use of a brace may have implications in slowing osteoarthritis progression. [ABSTRACT FROM AUTHOR]

Altered shoulder kinematics in patients with recurrent anterior shoulder instability remains poorly understood. This prospective study aimed to quantify in vivo glenohumeral and scapulothoracic joint kinematics and joint-contact positions in patients with shoulder instability and healthy controls. Twenty patients with recurrent anterior shoulder instability (mean 28 years) and five patients without shoulder pathology (mean 39 years) were scanned using open CT in six static upper limb positions including 90° of abduction, combined abduction and external rotation, 90° of flexion, lift-off position (i.e. reaching behind the back) and the neutral shoulder with external rotation. Image datasets were digitally reconstructed to quantify shoulder joint kinematics and glenohumeral translation. At 90° of abduction, instability patients demonstrated significantly less glenohumeral abduction and a reciprocal increase in upward scapulothoracic rotation compared to controls (mean difference: 13.3°, p = 0.038). With the shoulder in combined abduction and external rotation, instability patients showed a significant increase in glenohumeral rotation and a reciprocal decrease in scapulothoracic rotation compared to controls (mean difference: 5.0°, p = 0.042). There were no significant differences in humeral head translation in the sagittal plane (anterior-posterior axis) for all motions tested (p > 0.05). Scapulothoracic and glenohumeral kinematics are significantly different between patients with recurrent anterior shoulder instability and those with a healthy shoulder. Instability patients compensate for reduced glenohumeral function during abduction by increasing scapular rotation. With the shoulder in combined abduction and external rotation position, greater glenohumeral joint angles without significantly increased humeral head translation suggest altered neuromuscular control in the unstable shoulder. • Scapulothoracic kinematics are significantly altered in anterior instability vs. controls. • In abduction reduced glenohumeral motion is compensated by increased scapular rotation. • In apprehension position greater glenohumeral joint angles, but normal humeral translation. • This suggests altered neuromuscular control of the unstable shoulder. • The observed differences in shoulder kinematics may be used for targeted rehabilitation. [ABSTRACT FROM AUTHOR]

Motion of the mandible and temporomandibular joint (TMJ) plays a pivotal role in the function of the dentition and associated hard and soft tissue structures, and facilitates mastication, oral communication and access to respiratory and digestive systems. Quantification of TMJ kinematics is clinically relevant in cases of prosthetic rehabilitations, TMJ disorders, osteoarthritis, trauma, tumour resection and congenital abnormalities, which are known to directly influence mandibular motion and loading. The objective of this systematic review was to critically investigate published literature on historic and contemporary measurement modalities used to quantify in vivo mandibular and TMJ kinematics in six degrees of freedom. The electronic databases of Scopus, Web of Science, Medline, Embase and Central were searched and 109 relevant articles identified. Publication quality was documented using a modified Downs and Black checklist. Axiography and ultrasonic tracking are commonly employed in the clinical setting due to their simplicity and capacity to rapidly acquire low-fidelity mandibular motion data. Magnetic and optoelectronic tracking have been used in combination with dental splints to produce higher accuracy measurements while minimising skin motion artefact, but at the expense of setup time and cost. Four-dimensional computed tomography provides direct 3D measurement of mandibular and TMJ motion while circumventing skin motion artefact entirely, but employs ionising radiation, is restricted to low sampling frequencies, and requires time-consuming image processing. Recent advances in magnetic tracking using miniature sensors adhered to the teeth in combination with intraoral scanning may facilitate rapid and high precision mandibular kinematics measurement in the clinical setting. The findings of this review will guide selection and application of mandibular and TMJ kinematic measurement for both clinical and research applications. [ABSTRACT FROM AUTHOR]