Search

High critical temperature superconductors (HTS) based devices can have impact in the study of the phase dynamics of Josephson junctions (JJs) thanks to the wide range of junction parameters they offer and to their unconventional properties. Measurements of current-voltage characteristics and of switching current distributions constitute a direct way to classify different regimes of the phase dynamics and of the transport, also in nontrivial case of the moderately damped regime (MDR). MDR is going to be more and more common in JJs with advances in nanopatterning superconductors and synthesizing novel hybrid systems. Distinctive signatures of macroscopic quantum tunneling and of thermal activation in presence of different tunable levels of dissipation have been detected in YBCO grain boundary JJs. Experimental data are supported by Monte Carlo simulations of the phase dynamics, in a wide range of temperatures and dissipation levels. This allows us to quantify dissipation in the MDR and partially reconstruct a phase diagram as guideline for a wide range of moderately damped systems. (C) 2014 Elsevier B.V. All rights reserved.

Concepts and experimental procedures to obtain different types of YBa 2 Cu 3 O 7 grain boundaries Josephson junction through the biepitaxial technique have been developed. Various seed layers (MgO, CeO 2 and SrTiO 3) and substrates (MgO, SrTiO 3) have been used providing, for the biepitaxial technique, additional flexibility in circuit design. A detailed investigation on transport properties evidenced good performances for both junctions and superconducting quantum interference devices. Experimental evidence is given of a conventional magnetic field behavior in 45° tilt Artificial Grain Boundary (AGB) for which no π-loops are predicted along the interface.

We have designed an experiment that could allow to investigate, on the same sample, the interplay between the morphological anisotropy of high critical temperature superconductors and the effects related to the order parameter symmetry. To this aim we have employed c-axis tilt biepitaxial grain boundary YBa2Cu3O 7 - δ Josephson junctions and measured the junction properties for different junction interface orientations. The results give evidence of the possibility to tune normal state resistance and critical current density of a Josephson junction almost independently of each other. We interpret the results of this experiment as an indication that Cooper pairs and quasi-particles transport properties may be ruled by different mechanisms. Measurements apparently give evidence of the possibility to determine to some extent the presence of “π-loops” and “0” loops along the same grain boundary line.

Transport properties of high quality Nb/semiconductor/Nb long Josephson junctions based on metamorphic In_0.75Ga_0.25As epitaxial layers are reported. Different junction geometries and fabrication procedures are presented that allow a systematic comparison with quasiclassical theory predictions. The impact of junction transparency is highlighted and a procedure capable of yielding a high junction quality factor is identified., Comment: 11 pages, 3 figures

We present various concepts and experimental procedures to produce biepitaxial ${\mathrm{YBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7\ensuremath{-}x}$ grain-boundary Josephson junctions. The device properties have an interesting phenomenology, related in part to the possible influence of $\mathrm{``}\ensuremath{\pi}$ loops.'' The performance of our junctions and superconducting quantum interference devices indicates significant improvement in the biepitaxial technique. Further, we propose methods for fabricating circuits in which 0 and $\ensuremath{\pi}$ loops are controllably located on the same chip.

${\mathrm{YBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7\mathrm{\ensuremath{-}}\mathrm{\ensuremath{\delta}}}$ (YBCO) artificial grain-boundary Josephson junctions have been fabricated, employing a recently implemented biepitaxial technique. The grain boundaries can be obtained by controlling the orientation of the MgO seed layer and are characterized by a misalignment of the c axes (45\ifmmode^\circ\else\textdegree\fi{} c-axis tilt or 45\ifmmode^\circ\else\textdegree\fi{} c-axis twist). A detailed characterization of the Josephson properties has been carried out, showing remarkable differences in the transport parameters of tilt and twist junctions. High-resolution electron microscopy showed the presence of perfect basal plane faced boundaries in the cross sections of tilt boundaries; however interfaces meandering along the sample thickness are also sometimes observed. The correlation between transport properties and microstructure is investigated and the possibility to employ these junctions to explore the symmetry of the order parameter is presented. On the basis of the analysis of microstructural data and of a qualitative growth model for (103) YBCO grains, it is suggested that clean basal plane boundaries exhibiting uniform Josephson properties could be obtained by this technique.

Electron beam irradiation has been used to induce controllable variations in the properties of YBa 2 Cu 3 O 7-x biepitaxial grain boundary Josephson junctions. Electron irradiation decreased the critical current of the junctions IC and increased the normal state specific resistivities. The junction parameters can be adjusted controllably by applying an appropriate dose. The original properties of the junctions could be partly restored by isothermal annealing A correlation between the transport properties and the microstructure was obtained by determining the ratio of a barrier thickness to the dielectric constant of the junctions with different barriers. The experiment also demonstrates frequency tunability in a resonant soliton oscillator. Preliminar results of irradiation on (103) YBCO films have been given demonstrating differences from data on c -axis films, as partly expected from the anisotropy of these materials.

The properties of YBa 2 Cu 3 O 7− x grain boundary Josephson junctions have been reproducibly modified by a focused electron beam irradiation. The original junctions were fabricated by using the biepitaxial technique on (110) SrTiO 3 substrates. The technique utilizes the property of YBa 2 Cu 3 O 7− x film to grow (103)-oriented on the bare substrate and (001)-oriented on the part of the substrate with the MgO seed layer, providing Josephson junctions of good quality and excellent reproducibility. The junction parameters can be adjusted controllably by applying an appropriate irradiation dose. Electron irradiation reduced the critical current of the junctions I C and increased the normal state specific resistivity. The disappearance of the excess current and the shift of the voltage position of the Fiske steps were also observed. Isothermal annealing partly restores the original junction properties. We also speculate that some aspects of the nature of the grain boundary barriers can be better understood from the study of the transport properties of irradiated junctions. PACS: 74.50+r, 74.72Bk, 74.76Bz, 85.25Cp

The properties of the Y 1 Ba 2 Cu 3 O 7-x biepitaxial Josephson junctions were reproducibly modified by a focused electron beam irradiation of the interface region. The original structures are based on 45° a-axis tilt grain boundaries. The junction parameters can be controllably adjusted by applying an appropriate irradiation dose. Electron irradiation reduced the critical current of the junctions and increased the normal state specific resistivity The disappearance of the excess current and the shift of the voltage position of the Fiske steps were also observed. Isothermal annealing partly restores the original junction properties. Some aspects of the nature of the grain boundary barriers can be better understood from the study of the properties of irradiated junctions.

Electron-beam irradiation has been used to induce controllable variations in the properties of YBa2Cu3O72x biepitaxial grain-boundary Josephson junctions. A correlation between the transport properties and the microstructure was obtained by determining the ratio of a barrier thickness to the dielectric constant of the junctions with different barriers. These results give evidence of the role of the oxygen content and the dielectric constant of the interface region in transport phenomena. The experiment also demonstrates frequency tunability in a resonant soliton oscillator. @S0163-1829~98!51322-2#

We report on the study of the phase dynamics of high-critical-temperature superconductor Josephson junctions. We realized YBa${}_{2}$Cu${}_{3}$O${}_{7\ensuremath{-}x}$ grain boundary biepitaxial junctions in the submicron scale using low-loss substrates and analyzed their dissipation by comparing the transport measurements with Monte Carlo simulations. The behavior of the junctions can be fitted using a model based on two quality factors, which results in a frequency-dependent damping. Moreover, our devices can be designed to have Josephson energy of the order of the Coulomb energy. In this unusual energy range, phase delocalization strongly influences the device's dynamics, promoting the transition to a quantum phase diffusion regime. We study the signatures of such a transition by combining the outcomes of Monte Carlo simulations with the analysis of the device's parameters, the critical current, and the temperature behavior of the low-voltage resistance ${R}_{0}$.

We present various concepts and experimental procedures to fabricate biepitaxial YBa 2Cu 3O 7-x grain boundary Josephson junctions. Different types of structures can be realized including "π-loops" in which one of the junctions is intrinsically π-phase shifted. Due to its versatility the biepitaxial technique offers the possibility to investigate basic aspects of the physics of grain boundary Josephson junctions, and also the influence of intrinsic and extrinsic d-wave induced effects in transport properties. Further, we discuss the possibility to produce circuits in which "0-" and "π-loops" are controllably located on the same chip, and intrinsic d-wave effects can be exploited.

The effects of the order parameter symmetry and the interface grain boundary orientation on the transport properties of YBa/sub 2/Cu/sub 3/O/sub 7-x/ biepitaxial grain boundary junctions have been investigated. 45/spl deg/ [100] tilt and twist junctions on SrTiO/sub 3/ [110] and MgO [110] substrates by employing respectively MgO and SrTiO/sub 3/ as seed layers have been fabricated. More complex junctions by using CeO as seed layers have also been fabricated and analyzed. The analysis of experimental data points towards a predominant d-wave symmetry of the superconductive order parameter.

We have extended the off-axis biepitaxial technique to produce YBCO grain boundary junctions on low loss substrates. Excellent transport properties have been reproducibly found, with remarkable values of the quality factor I(c)R(n) (with I(c) the critical current and R(n) the normal state resistance) above 10 mV, far higher than the values commonly reported in the literature for high temperature superconductor (HTS) based Josephson junctions. The outcomes are consistent with a picture of a more uniform grain boundary region along the current path. This work supports a possible implementation of grain boundary junctions for various applications including terahertz sensors and HTS quantum circuits in the presence of microwaves.

YBa(2)Cu(3)O(7-delta) (YBCO) grain boundaries characterized by a misalignment of the c-axes (45 degrees c-axis tilt or 45 degrees c-axis twist) have been obtained by employing a recently implemented biepitaxial technique. Junctions based on these grain boundaries exhibit good Josephson properties useful for applications. High values of the I(C)R(N) product and a Fraunhofer-like dependence of the critical current on the magnetic field, differently from traditional biepitaxial junctions, have been obtained. The correlation between transport properties and microstructure has been investigated by Transmission Electron Microscopy (TEM), which was also performed on previously measured junctions. The presence of atomically clean basal plane (BP) faced tilt boundaries, among other types of interfaces, has been shown. The possibility of selecting these kinds of boundaries by controlling film growth, and their possible advantages in terms of reproducibility and uniformity of the junction properties an discussed. The possibility of employing these junctions to explore the symmetry of the order parameter is also discussed. (C) 1999 Elsevier Science B.V. All rights reserved.

YBa2Cu3O7-x artificial grain boundary Josephson junctions have been fabricated, employing a recently implemented biepitaxial technique. The grain boundaries can be obtained by controlling the orientation of the MgO seed layer and are characterized by a misalignment of the c-axes (45 degrees a-axis tilt or 45 degrees a-axis twist). These types of grain boundaries are still mostly unexplored. We carried out a complete characterization of their transport properties and microstructure. Junctions and de SQUIDs associated with these grain boundaries exhibit an excellent Josephson phenomenology and high values of the ICRN product and of the magnetic flux-to-voltage transfer parameter respectively. Remarkable differences in the transport parameters of tilt and twist junctions have been observed, which can be of interest for several applications. A maximum speed of Josephson vortices as calculated from the voltage step values of the order of 2 x 10(6) m s(-1) is obtained. These devices could also have some impact on experiments designed to study the symmetry of the order parameter, exploiting their microstructure and anisotropic properties. High-resolution electron microscopy showed the presence of perfect basal plane faced boundaries in the cross sections of tilt boundaries.

Superconducting quantum interference devices (SQUIDs) have been fabricated using YBa2Cu3O72x @100# 45°-tilt grain-boundary Josephson junctions based on a controllable biepitaxial technique. These devices are characterized by large characteristic voltages, desirable magnetic-flux-to-voltage transfer parameters and low flux noise. An energy resolution of 1.6310230 J/Hz at liquid helium has been measured, which is the lowest value reported for biepitaxial SQUIDs. These junctions exhibit a phenomenology different from traditional @001# 45°-tilt biepitaxials probably due to the absence of p junctions. The performance of the presented SQUIDs demonstrates that significant improvements in the biepitaxial technique are possible, and the resulting devices have potential for applications.

We present various concepts and experimental procedures to fabricate biepitaxial YBa2Cu3O7-x grain boundary Josephson junctions. The performance of our junctions indicates significant improvement in the biepitaxial technique. Different types of structures can be realized including “π-loops” in which one of the junctions is intrinsically π-phase shifted. Due to its versatility the biepitaxial technique offers the possibility to investigate basic aspects of the physics of grain boundary Josephson junctions and also the influence of π-loops in transport properties. Further, we discuss the possibility to produce circuits in which “0-” and “π-loops” are controllably located on the same chip.

YBa/sub 2/Cu/sub 3/O/sub 7/-/sub x/ junctions and dc SQUIDs have been realized by employing 45/spl deg/ a-axis tilt grain boundaries through a fabrication procedure based on the biepitaxial technique. YBa/sub 2/Cu3O/sub 7-x/ grows mainly oriented [103] on SrTiO/sub 3/ and [001] on the MgO seed layer. A wide characterization of the tilt junctions and SQUID properties has been carried out. High values of the I/sub C/R/sub N/ quality factor and of the magnetic flux-to-voltage transfer parameter have been obtained, The observed phenomenology confirms differences from the one typical of 45/spl deg/ c-axis tilt grain boundary junctions and gives important information on the nature of the current steps appearing at finite voltages in the current-voltage characteristics. These devices could also have some impact on experiments designed to study the symmetry of the order parameter, exploiting their microstructure and anisotropic properties. A maximum speed of Josephson vortices as calculated from the voltage step values, of the order of 2 10/sup 6/ m/sec is obtained, which encourages high frequency applications.