Search

Ionic liquids (ILs) have been widely investigated for the pretreatment and deconstruction of lignocellulosic feedstocks. However, the modes of interaction between IL-anions and cations, and plant cell wall polymers, namely, cellulose, hemicellulose, and lignin, as well as the resulting ultrastructural changes are still unclear. In this study, we investigated the atomic level and suprastructural interactions of microcrystalline cellulose, birchwood xylan, and organosolv lignin with 1,3-dialkylimidazolium ILs having varying sizes of carboxylate anions. Analysis by 13 C NMR spectroscopy indicated that cellulose and lignin exhibited stronger hydrogen bonding with acetate ions than with formate ions, as evidenced by greater chemical shift changes. Small-angle X-ray scattering analysis showed that while both cellulose and xylan adopted a single-stranded conformation in acetate-ILs, twice as many acetate ions were bound to one anhydroglucose unit than to an anhydroxylose unit. We also determined that a minimum of seven representative carbohydrate units must interact with an anion for that IL to effectively dissolve cellulose or xylan. Lignin is associated as groups of four polymer molecules in formate-ILs and dispersed as single molecules in acetate-ILs, which indicates that it is highly soluble in the latter. In summary, our study demonstrated that 1,3-dialkylimidazolium acetates displayed stronger binding interactions with cellulose and lignin, as compared to formates, and thus have superior potential to fractionate these polymers from lignocellulosic feedstocks.

The ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([EMIM]Acetate) has been widely used for biomass processing, i.e., to pretreat, activate, or fractionate lignocellulosic biomass to produce soluble sugars and lignin. However, this IL does not achieve high biomass solubility, therefore minimizing the efficiency of biomass processing. In this study, [EMIM]Acetate and three other ILs composed of different 3-methylimidazolium cations and carboxylate anions ([EMIM]Formate, 1-allyl-3-methylimidazolium ([AMIM]) formate, and [AMIM]Acetate) were analyzed to relate their physicochemical properties to their biomass solubility performance. While all four ILs are able to dissolve hybrid poplar under fairly mild process conditions (80 °C and 100 RPM stirring), [AMIM]Formate and [AMIM]Acetate have particularly increased biomass solubility of 40 and 32%, respectively, relative to [EMIM]Acetate. Molecular dynamics simulations suggest that strong interactions between IL and specific plant biopolymers may contribute to this enhanced solubilization, as the calculated second virial coefficients between ILs and hemicellullose are most favorable for [AMIM]Formate, matching the trend of the experimental solubility measurements. The simulations also reveal that the interactions between the ILs and hemicellulose are an important factor in determining the overall biomass solubility, whereas lignin-IL interactions were not found to vary significantly, consistent with literature. The combined experimental and simulation studies identify [AMIM]Formate as an efficient biomass solvent and explain its efficacy, suggesting a new approach to rationally select ionic liquid solvents for lignocellulosic deconstruction.

Ionic liquids (ILs) are benign solvents that are highly effective for biomass pretreatment. However, their applications for scale-up biorefinery are limited due to multiple expensive IL recovery and separation steps that are required. To overcome this limitation, it is very critical to develop a compatible enzymatic and microbial biocatalyst system to carry the simultaneous saccharification and fermentation in IL environments (SSF-IL). While enzymatic biocatalysts have been demonstrated to be compatible with various IL environments, it is challenging to develop microbial biocatalysts that can thrive and perform efficient biotransformation under the same conditions (pH and temperature). In this study, we harnessed the robust metabolism of Yarrowia lipolytica as a microbial platform highly compatible with the IL environments such as 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]). We optimized the enzymatic and microbial biocatalyst system using commercial cellulases and demonstrated the capability of Y. lipolytica to convert cellulose into high-value organics such as α-ketoglutaric acid (KGA) in the SSF-IL process at relatively low temperature 28 °C and high pH 6.3. We showed that SSF-IL not only enhanced the enzymatic saccharification but also produced KGA up to 92% of the maximum theoretical yield.

Fractionation of lignocellulosic biomass is an attractive solution to develop an economically viable biorefinery by providing a saccharide fraction to produce fuels and a lignin stream that can be converted into high value products such as carbon fibers. In this study, the analysis of ionic liquid-activated biomass demonstrates that in addition of decreasing crystallinity, the selected ILs (1-butyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate) deacetylate Yellow poplar under mild conditions (dissolution at 60-80 °C), and lower the degradation temperature of each biomass polymeric component, thereby reducing the recalcitrance of biomass. Among the three tested ILs, 1-ethyl-3-methylimidazolium acetate performed the best, providing a strong linear relationship between the level of deacetylation and the rate of enzymatic saccharification for Yellow poplar., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Materials generated from renewable resources are promising and attractive substitutes for petroleum-based materials. Recently, regeneration of cellulose fibers using ionic liquids (ILs) as green solvents has been a topic of interest to both industrial and academic sectors. However, extraction of cellulose from lignocellulosic biomass requires numerous energy intensive processing steps. Additionally, the deconstruction and removal of lignin and hemicellulose components from lignocellulosic biomass usually involve corrosive pretreatment and the solvation of specific biomass components. Instead, utilization of the whole biomass—particularly woody residues—to manufacture high-performance materials offers an attractive value-proposition. In this study, we demonstrated fiber regeneration of whole hybrid poplar (HP) biomass by a sustainable method. We developed an environmentally friendly approach by partially auto-hydrolyzing the biomass with water before its dissolution in 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) ionic liquid, for large-scale, roll-to-roll production of fibers by solution spinning. We report, for the first time, a fundamental understanding of the inter- and intramolecular interactions in HP biomass–IL solutions, as well as their corresponding spinnability, structural reformation, and mechanical performance of the regenerated fibers. Particularly, the molecular alignment, recrystallization, and crystallinity of the spun fibers were correlated to the chain entanglement, molecular relaxation, and rheological properties of the HP biomass–IL solutions. A window of entangled concentration (4–6.5 wt%) of biomass in the IL was determined to be favorable for fiber spinning. [ABSTRACT FROM AUTHOR]

The article discusses research regarding the stability and activity of ionic liquid cellulases and glucosidase systems in the presence of 1-ethyl-3-methylimiazolium acetate. The latter was selected for several factors including its low viscosity and melting temperature. The various concentrations used to determine the enzymatic stability of cellulase mixtures are described. Details concerning the enzymatic saccharification of both pretreated and activated Avicel solutions are also presented.

A new simple and safe method for quantifying lignin content in lignocellulosic biomass is described. The approach consists of measuring the absorbance of a solution of whole biomass dissolved in the ionic liquid 1-n-butyl-3-methyl imidazolium chloride, [Bmim][Cl], at 440 nm via ultraviolet- (UV-) visible spectrophotometry. An extinction coefficient for a lignin standard, highly pure lignin isolated from biomass through an organosolv process, is used in conjunction with the Beer- Lambert Law to calculate the lignin concentration. Principal component analysis (PCA) of Fourier Transform-Infrared (FTIR) spectra collected for several different lignin standards was performed to understand the differences in their chemical structure and composition (e.g., the relative amounts of syringyl and guaiacyl units). A rapid FTIR analysis of the whole biomass sample with unknown lignin content is required to assist in the proper selection of the lignin standard for the subsequent spectrophotometric analysis. The proposed method was tested and validated on two biomass types: Yellow poplar and Southern pine. The spectrophotometric approach yielded lignin contents for Yellow poplar and Southern pine of 25.7 ± 1.1% and 26.7 ± 0.7%, respectively, which are comparable to the values obtained by a standard wet chemical protocol, 25.1% ± 0.7 and 26.6 ± 0.4%, respectively. [ABSTRACT FROM AUTHOR]

The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C 4 mim][OAc]) pretreatment (110 °C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C 4 mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C 4 mim][OAc] pretreated bagasse, and 62.1% and 57.5% from the bagasse autohydrolyzed at 205 °C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C 4 mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass. [ABSTRACT FROM AUTHOR]