Search

Study Design: Biomechanical cadaveric study., Objective: The aim of this study was to evaluate the effect of degeneration on biomechanical properties of the passive structures of the lumbar spine., Summary of Background Data: Although the load apportionment among the passive structures in healthy spines follows well-defined contribution patterns, it remains unknown how this load distribution and sagittal preload changes by degenerative processes of the intervertebral disc (IVD)., Methods: Fifty lumbar spinal segments were tested in a displacement-controlled stepwise reduction study in flexion, extension, axial rotation, lateral bending, anterior, posterior and lateral shear. The intertransverse ligaments (ITLs), supraspinous and interspinous ligaments (ISL&SSL), facet joint capsules (FJC), facet joints (FJ), ligamentum flavum (LF), posterior longitudinal ligament (PLL), anterior longitudinal ligament (ALL), and spondylophytes were subsequently reduced. The results were set in relation to IVD-degeneration, quantified with Pfirrmann classification., Results: In flexion, a load redistribution from LF (-28% n.s.) and PLL (-13% n.s.) towards the IVD (+9%, n.s.) is observed comparing grade 2 to 5 IVD degeneration, whereas in all other loading directions, a reduction of IVD-contribution from -12% to -53% is recorded. In axial rotation, anterior and lateral shear, more load is shared by the FJ (+4% n.s., +23% ∗, +13% n.s.). The preload of the ALL, LF, PLL, and IVD is reduced ranging from -0.06 Nm to -0.37 Nm., Conclusion: IVD degeneration is related to notable load-redistributions between the passive spinal structures. With further degeneration, reduced contribution of the LF and PLL and higher loads on the IVD are observed in flexion. In the other tested loading directions, the relative load on the IVD is reduced, whereas higher FJ-exposure in axial rotation, anterior and lateral shear is observed. Furthermore, the preload of the spinal structures is reduced. These observations can further the understanding of the degenerative cascade in the spine.Level of Evidence: N/A., (Copyright © 2020 Wolters Kluwer Health, Inc. All rights reserved.)

Background Context: The ligamentum flavum (LF), the inter- and supraspinous ligament (ISL&SSL) and the intertransverse ligament (ITL) are relevant spinal structures for segmental stability. The biomechanical effect of degeneration and aging on their biomechanical properties remains largely unknown., Purpose: The aim of this study was to assess the material properties of the ITL, ISL&SSL and LF and to correlate parameters of biomechanical function with LF-thickness, intervertebral disc (IVD) degeneration and age., Study Design: Biomechanical cadaveric study., Methods: MRI- and CT-scans of 50 human lumbar segments (Th12-L5) were used to assess the ISL (acc. to Keorochana), the grade of IVD degeneration (acc. to Pfirrmann) and to quantify LF-thickness. The ITL, ISL&SSL and LF were resected in the neutral position of the spinal segment with a specifically developed method to conserve initial strain. Ramp to failure testing was performed (0.5 mm/s) to record initial tension, slack length, stiffness and ultimate strength. The relationship between the biomechanical characteristics and age and radiological parameters were analyzed. There are no study-specific conflicts of interest and no external funding was received for this study., Results: With aging, a significant reduction in initial tension (r=-0.5, p<.01) and ultimate strength (r=-0.41, p<.01) of the LF was observed, while the effect on LF-stiffness and the characteristics of the other ligaments was non-significant. IVD-degeneration was correlated with a significant reduction in stiffness (r=-0.47, p=.001; r=-0.36, p=.01) and ultimate strength (r=-0.3, p=.04; r=-0.36, p=.01) of the LF and ISL&SSL respectively and a significant reduction in initial tension (r=-0.4, p<.01) of the LF. For the ITL, no significant correlation was observed. Comparing Pfirrman 2 to 5, this reduction was 40% to 80% for stiffness 60% to 70% for ultimate strength and 88% for initial tension of the LF. ISL&SSL-stiffness between Kerorochana grade A and D differed significantly (p=.03), while all other comparisons were non-significant (p>.05). LF-thickness did not correlate with the biomechanical properties of the LF (p>.05)., Conclusions: Aging is primarily related to biomechanical changes to the LF. IVD-degeneration is related to a relevant reduction in stiffness and ultimate strength of the LF and ISL&SSL, with a similar trend for the ITL. The ISL-specific Keorochana grading system provides only minimal biomechanical information and LF-thickness does not provide biomechanical information., Clinical Significance: Patient age and the degenerative state of the IVD can be used to evaluate the biomechanical characteristics of the dorsal spinal ligaments, which can be helpful in selecting the optimal surgical procedure (e.g. in decompression surgery) for a specific situation., (Copyright © 2021 The Author(s). Published by Elsevier Inc. All rights reserved.)

Information on the local stiffness characteristics of the intervertebral disc (IVD) is crucial for the understanding of its structure-function properties in health and disease and may improve numerical modeling. Previous studies have attempted to map local tissue stiffness by sectioning the disc and performing mechanical testing on these discrete tissue units, which is technically challenging and may bias the results. Shear wave elastography (SWE) represents a nondestructive alternative that can provide spatially continuous elasticity estimates. We investigated the feasibility of SWE for human intervertebral disc elasticity mapping in a laboratory setting. To this end, global spinal segment mechanical behavior was determined in 6 loading directions and served as ground truth data for the validation of the approach. Subsequently, the cranial spinal vertebra was removed and shear wave elastographic scans of the IVD were acquired. SWE-measurements were reconstructed into three-dimensional elastographic maps, discretized into distinct IVD regions and correlated with global segment mechanical parameters. SWE-derived Young's modulus estimates were compared among different regions and as a function of their state of degeneration. We found annulus shear wave speed to be moderately correlated with segment mechanical behavior irrespective of the loading direction whereas shear wave speed in the nucleus pulposus showed a very weak association (mean (SD) absolute Pearson correlation coefficients: 0.51 (0.14) and 0.17 (0.12), respectively). Young's modulus mapping of the intervertebral disc revealed stiffness to be highest in the ventral annulus with a stiffness decrease both circumferentially towards the dorsal aspect as well as towards the center of the disc. SWE hence provides a valid alternative to disc sectioning and piecewise mechanical testing., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background Context: The contribution of anatomical structures to the stability of the spine is of great relevance for diagnostic, prognostic and therapeutic evaluation of spinal pathologies. Although a plethora of literature is available, the contribution of anatomical structures is still not well understood., Purpose: We aimed to quantify the biomechanical relevance of each of the passive spinal structure trough deliberate biomechanical test series using a stepwise reduction approach on cadavers., Study Design: Biomechanical cadaveric study., Methods: Fifty lumbar spinal segments originating from 22 human lumbar cadavers were biomechanically tested in a displacement-controlled stepwise reduction study: the intertransverse ligaments, the supraspinous and interspinous ligaments, the facet joint capsules (FJC), the facet joints (FJ), the ligamentum flavum (LF), the posterior longitudinal ligament (PLL), and the anterior longitudinal ligament were subsequently reduced. In the intact state and after each transection step, the segments were physiologically loaded in flexion, extension, axial rotation (AR), lateral bending (LB) and with anterior (AS), posterior (PS) and lateral shear (LS). Thirty-two specimens with only minor degeneration, representing a reasonably healthy subpopulation, were selected for the here presented evaluation. Quantitative values for load and spinal level dependent contribution patterns for the anatomical structures were derived., Results: Small variability between of the contribution patterns are observed. The intervertebral disc (IVD) is exposed to about 67% of the applied load in LB and during shear loading, but less by load in flexion, extension and AR (less than 35%). The FJ&FJC are the main stabilizers in AR with 49%, but provide only 10% of the stability in extension. Beside the IVD, the LF and the PLL contribute mainly in flexion (22% and 16%, respectively), while the ALL plays a major role during extension (40%) and also contributes during LB (15%). The contribution of the intertransverse ligaments and the supraspinous and interspinous ligaments are very small in all loading directions (<2% and <6%, respectively)., Conclusion: The IVD takes the main load in LB and absorbs shear loading, while the FJ&FJC stabilize AR. The ALL resists extension while LF and PLL stabilize flexion. With the small variability of contribution patterns, suggesting distinct adaptation of the structures to one another, the biomechanical characteristics of one structure have to be put in context of the whole spinal segment., Clinical Significance: The novel information on load distribution helps predict the biomechanical consequences of surgical procedures in more detail., (Copyright © 2020 The Author(s). Published by Elsevier Inc. All rights reserved.)