Search

The automotive industry is experiencing radical changes under the pressure of institutions that are increasingly reducing the limits on CO2 and pollutant emissions from road vehicles powered by internal combustion engines (ICEs). A way to decarbonize the transport sector without disrupting current automotive production is the adoption of alternative fuels for internal combustion engines (ICEs). Hydrogen is very attractive, thanks to the zero-carbon content and very high laminar flame speed, allowing for extending the lean burn limit. Other alternative fuels are methanol and ethanol. This work deals with the conversion of a small-sized passenger car powered by a three-cylinder spark ignition (SI) engine for the use of alternative fuels. In particular, the spark timing has been optimized to improve the fuel economy under every operating condition. The optimization procedure is based on the MATLAB/Simulink® R2024a-GT-Power co-simulation analysis and minimizes the fuel consumption by varying the spark timing independently for each cylinder. In particular, at full load, the algorithm reduces the spark timing only for the cylinder in which knock is detected, reducing fuel consumption by about 2% compared to the base calibration. This approach will be adopted in future activities to understand how the use of alternative fuels affects the ignition control strategy. [ABSTRACT FROM AUTHOR]

• 1-D engine model with predictive TJI combustion is developed and exp. validated. • TJI engine operation is exploited by 1-D model. • A comprehensive model of series-HEV is designed by 1-D simulation results. • The benefits of TJI concept on overall efficiency and battery sizing are assessed. In the last decades, the concern about vehicles' environmental impact has progressively increased. Therefore, car manufacturers are moving towards vehicles with low emissions like Hybrid Electric Vehicles (HEV), that in the series architecture utilize an internal combustion engine (ICE) to power an electric generator for battery recharging thus extending the driving range of a Battery Electric Vehicle (BEV). For such applications, small four-stroke spark-ignition (SI) engines are a suitable solution, as they are proven low-cost and reliable systems and allow to increase vehicle driving range with reduced environmental impact. In series HEV the ICE is decoupled from the drive wheels and operates at a fixed working point regardless to the instantaneous power demand, thus promoting the lean mixture operation to achieve high efficiency and low CO 2 emissions. In this work, the performance, in terms of driving range, energy consumption and CO 2 emissions, of a series HEV are analyzed in experimental and simulation environment. Particularly, the Auxiliary Power Unit (APU) is a small ICE equipped with a passive Turbulent Jet Ignition (TJI) that allows to guarantee stable combustion also under lean mixture operation, with an increase of engine efficiency and a reduction of CO 2 emissions. The effects of lean air–fuel ratio on combustion process and engine performance are investigated by a one-dimension (1-D) model and validated vs experimental measurements at the test bench on a prototype single cylinder engine equipped with passive prechamber. The benefits of the high efficiency ICE operation on the series HEV performance, energy consumption and CO 2 emissions vs standard and arbitrary driving cycles are analyzed in simulation environment, making use of the simulation results gathered by the 1-D engine model. Simulation analyses are carried out to evaluate the best compromise between battery pack downsizing and energy consumption for a fixed target of vehicle drive range. Simulation results show that TJI concept allows to achieve an APU efficiency up to 32 %, by operating with λ equal to 1.26. Additionally, the analysis on battery pack downsizing evidences that switching from 150 % to 50 % of the reference battery pack capacity results in an increase of the overall energy consumption up to 22 %. [ABSTRACT FROM AUTHOR]