Search

Foam injection contributes to improved oil recovery through flow diversion, reduction of interfacial tension (IFT), and wettability alteration of the rock while its stability is an issue. In this article, nitrogen‐foam was optimally formulated using fluorocarbon tubiguard protect (FTP) surfactant stabilized with sodium dodecyl sulfate (SDS) co‐surfactant that was later experimentally considered for oil recovery in a fractured carbonate rock taken from an oil field in the Middle East. The results showed that the 5:1 volume ratio of fluorocarbon surfactant and SDS (FS51) generates a stable foaming agent with ability of changing the wettability of the carbonate rock surfaces to an intermediate gas‐wet state. A series of core‐flood experiments at HPHT conditions were also carried out and designed to properly represent matrix‐fracture media using both a horizontally and vertically oriented setup. The oil saturated cores were flooded with nitrogen gas first followed by foam injection. It was concluded that foam can divert the gas to flow from fractures to the matrix blocks and result in a significant oil recovery. The contact angle tests that performed after core‐flood experiments revealed the wettability changes of fracture surfaces from an oil‐wet to a gas‐wet state. This allows gas to be imbibed into the matrix blocks by capillary force and results in enhancement of ultimate oil recovery. This study revealed that trapped oil in matrixes blocks that had not been drained during the gas injection process could be produced by designing a stable foam that sustainably diverts injected fluid from fractures to matrix zone. [ABSTRACT FROM AUTHOR]

Fractured moderate oil-wet carbonate reservoirs are the main productive formations in the Middle East. The change in wettability state toward water wetness beside interfacial tension (IFT) reduction is one of the potential scenarios for more oil recovery process. Smart water and natural surfactant injection into the porous media will alter the rock wettability and reduce IFT which consequently results in more oil sweep from untouched pores. In this paper, a novel natural surfactant (Alfalfa species) is introduced for EOR applications. IFT and contact angle tests were carried out between the oil phase, rock surface, Alfalfa natural surfactant, and surfactant—ion hybrid aqueous solutions. The results of Alfalfa natural surfactant showed a 29.29 mN/m reduction of IFT (63.39% IFT optimization) at the concentration of 4 wt% as the critical micelle concentration (CMC). Also, after addition of Alfalfa the wettability of rock tends to be more water-wet from the initial oil-wet state by application of Alfalfa because of 86.84° reduction of contact angle (49.91% wettability alteration). Solutions of calcium, magnesium, and sulfate ions were prepared as modified synthetic seawater at CMC of Alfalfa natural surfactant to investigate their synergistic influences on intensifying the optimizations of IFT and wettability alteration as hybrid solutions. IFT measurements of the hybrids demonstrated that among mentioned ions calcium brings the best results as it showed good synergistic effects with mentioned non-ionic natural surfactant in advancing the optimization of IFT reduction from 63.39 (surfactant solution) to 71.0 (surfactant—ion hybrid solution) percent. Also, contact angle measurements of the hybrids demonstrated that calcium ions gain the best results and advance the contact angle optimization from 49.91 (surfactant solution) to 61.8 (surfactant—ion hybrid solution) percent. Therefore, the solution of 3 times Ca concentrated seawater + CMC of surfactant selected to conduct imbibition tests as a displacement experiment based on the hybrid results and the candidate solution caused a 19.2% increase in oil recovery factor regarding seawater flooding and a total oil recovery factor of 62%. • Optimization of IFT and wettability conditions by application of Alfalfa species as a natural surfactant for chemical EOR • Enhancement of the mentioned optimizations by addition of smart ions to natural surfactant solutions • Synergistic effects of Alfalfa natural surfactant and Smart water • Improvement of oil recovery factor by introducing the optimum hybrid solution at reservoir temperature [ABSTRACT FROM AUTHOR]