Search

The distribution of reinforcements and interfacial bonding state with the metal matrix are crucial factors in achieving excellent comprehensive mechanical properties for aluminum (Al) matrix composites. Normally, after heat treatment, graphene nanosheets (GNSs)/Al composites experience a significant loss of strength. Here, better performance of GNS/Al was explored with a hybrid strategy by introducing 0.9 vol.% silicon carbide nanoparticles (SiCnp) into the composite. Pre-ball milling of Al powders and 0.9 vol.% SiCnp gained Al flakes that provided a large dispersion area for 3.0 vol.% GNS during the shift speed ball milling process, leading to uniformly dispersed GNS for both as-sintered and as-extruded (0.9 vol.% SiCnp + 3.0 vol.% GNS)/Al. High-temperature heat treatment at 600 °C for 60 min was performed on the as-extruded composite, giving rise to intragranular distribution of SiCnp due to recrystallization and grain growth of the Al matrix. Meanwhile, nanoscale Al4C3, which can act as an additional reinforcing nanoparticle, was generated because of an appropriate interfacial reaction between GNS and Al. The intragranular distribution of both nanoparticles improves the Al matrix continuity of composites and plays a key role in ensuring the plasticity of composites. As a result, the work hardening ability of the heat-treated hybrid (0.9 vol.% SiCnp + 3.0 vol.% GNS)/Al composite was well improved, and the tensile elongation increased by 42.7% with little loss of the strength. The present work provides a new strategy in achieving coordination on strength–plasticity of Al matrix composites. [ABSTRACT FROM AUTHOR]

The poor mechanical and tribological properties limit the higher requirements of aluminum alloys in engineering and industrial applications, which leads to the rapid development of aluminum matrix composites (AMCs). Particulate reinforced AMCs have attracted extensive attention in automobile, electronics and military industries due to their low density, high strength, and excellent wear resistance. However, the interfacial reaction between reinforcements and the Al matrix tends to occur in conventional preparation processes owing to the higher reaction temperatures. The spark plasma sintering (SPS) technique is considered to be an efficient method for the fabrication of metal matrix composites, which can achieve rapid sintering, lower sintering temperatures, and higher densities than conventional fabrication processes. In addition, SPS can produce AMCs with excellent non-porous microstructure, fine grain size, and a strong bonding interface between reinforcement and Al matrix. Therefore, the interfacial reaction is effectively controlled and the structural integrity is maintained, resulting in enhanced strength and ductility. Based on the advantages of particulate reinforced AMCs and the SPS technique, the particulate reinforced AMCs fabricated by SPS have been extensively studied in recent decades, but have not been systematically evaluated. Therefore, this paper reviews the state-of-the-art particulate reinforced AMCs fabricated by SPS, focusing on the microstructure characterization, strengthening mechanisms, and mechanical and physical properties. Furthermore, the future research priorities and challenges of the high-performance particulate reinforced AMCs fabricated by SPS are also prospected. [ABSTRACT FROM AUTHOR]