Search

Light attenuation within a row of crops such as cotton is influenced by canopy architecture, which is defined by size, shape and orientation of shoot components. Level of light interception causes an array of morpho-anatomical, physiological and biochemical changes. Physiological determinants of growth include light interception, light use efficiency, dry matter accumulation, duration of growth and dry matter partitioning. Maximum light utilization in cotton production can be attained by adopting cultural practices that yields optimum plant populations as they affect canopy arrangement by modifying the plant canopy components. This paper highlights the extent to which spatial arrangement and density affect light interception in cotton crops. The cotton crop branches tend to grow into the inter-row space to avoid shade. The modification of canopy components suggests a shade avoidance and competition for light. Maximum leaf area index is obtained especially at flowering stage with higher populations which depicts better yields in cotton production.

The photosynthetically active radiation (PAR) of crop canopy is highly related to yield formation, but how it relates to yield and yield distribution is not well understood. The focus of this study was to explore the relationship between light competition under different densities and yield distributions of cotton. The experiment was conducted in 2019 and 2020 at the Cotton Research Institute of the Chinese Academy of Agricultural Sciences in Anyang city, Henan Province, China. A randomized block design was employed, with a total of three repeats. Each repeat had six density treatments: D1: 15,000, D2: 33,000, D3: 51,000, D4: 69,000, D5: 87,000, and D6: 105,000 plants·ha−1. As predicted, the results showed that the canopy light interception, leaf area index, plant height, and biomass of high-density cotton were higher than those of low-density cotton. The aboveground biomass produced by D6 was the highest, and was 12.9, 19.5, 25.4, 46.3, and 69.2% higher in 2019 and 14.3, 19.9, 32.5, 53.7, and 109.9% higher in 2020 than D5, D4, D3, D2, and D1, respectively. Leaf area, plant height, biomass, boll number, and boll weight were significantly correlated with the light interception rate. D5 (87,000 plants·ha−1) had a higher light interception rate and the highest yield. The highest lint yields produced by D5 were 1673.5 and 1375.4 kg·ha−1 in two years, and was 3.2, 4.3, 5.6, 9.7, and 24.7% higher in 2019, and 6.8, 10.6, 13.5, 21.5, and 34.4% higher in 2020 than D6, D4, D3, D2, and D1, respectively. The boll retention of the lower fruit branch under D5 reached 0.51 and 0.57 in two years, respectively. The shedding rate of the upper fruit branch decreased with the increase in cotton density in two years. The boll retention rate and shedding rate in the lower part of cotton plants were most closely related to light interception, with R2 values of 0.91 and 0.96, respectively. Our study shows cotton yield could be improved through higher light interception by optimizing planting density and canopy structure.

International audience; Complex biological models such as mechanistic research models often need to extend their current use to a broader audience. Simplification and faster simulations would increase their use. Here, a step-by-step method- ology was developed and applied to partially metamodel, hence accelerate, the mechanistic model FLORSYS. This is a process-based, multiannual and multispecies model ("virtual field") which simulates crop growth and weed dynamics and allows users to assess cropping systems for crop production and biodiversity. The model is rela- tively slow, which makes it difficult to test numerous and diverse cropping systems needed to identify those reconciling crop production and biodiversity. Here, we (1) identified the slowest submodel of FLORSYS, i.e. the 3D voxelized light interception submodel, (2) identified and applied a relevant methodology to metamodel this submodel in the simplest situation, i.e. we predicted light interception and absorption directly at the scale of the plant instead of the voxel for a single plant in a field, and (3) extrapolated the method to more complex situ- ations, i.e. a plant in diverse and heterogeneous crop:weed canopies, (4) replaced the original process-based FLORSYS submodel by the metamodels, which required additional equations and decision rules, (5) evaluated the metamodelled FLORSYS with independent field observations, showing an adequate prediction quality com- bined with an increased speed at fine-grained scale since the metamodelled version was 28 times faster than the process-based version. For steps 2 and 3, we used the global sensitivity method based on a truncated Legendre polynomial chaos expansion (PCE) whose coefficients were estimated by Partial Least Squares (PLS) regression to simultaneously (i) rank inputs with respect to their polynomial and total effects on outputs via the so-called PCE- PLS sensitivity indices, and (ii) provide metamodels predicting light interception and absorption at the plant level. These metamodels were then shortened into parsimonious metamodels via a LASSO-PLS method. The study showed that there was a trade-off between speed gain due to the metamodelled 3D light submodel and the speed loss due to the additional functions for neighbourhood effects. The metamodelled version is best used for testing complex systems where plant location must be modelled precisley (e.g., precision agriculture, intercropping with precision sowing) whereas the voxelized version with a large voxel size is better for simpler cropping systems. The present step-by-step process may be helpful for investigating and speeding up other complex simulation models with interacting objects/agents. It notably uses a hybrid approach, using a process-based (albeit simplified) approach for the most sensitive plant stage (newly emerged tiny plants) and separate sampling plans and metamodels to ensure that the more sensitive stages/components are adequately covered (small plants).

The objective of work was to study the productive profile of perennial peanut in a rotational stocking environment under different criteria. The treatments corresponded to pre-grazing height of 14 and 18cm or 95% of light interception (LI) distributed in a completely randomized design. The studied variables were forage mass, percentage of structural components, forage mass and the structural components in the lower and upper canopy strata. The entrance criterion of 18cm in height, despite having higher forage mass, presented lower percentage of leaves and higher percentage of stems and forage losses. The criteria of 14cm and 95% light interception presented similar production between them and the highest rate of forage accumulation. In all criteria, in the upper strata of pasture a higher percentage of leaves were found. The criteria of 95% LI and 14cm in height presented the best productive performances. The entry criterion of 18cm presented a higher mass of pre-grazing forage with lower percentage of dead material, but with higher forage losses, resulting from senescent leaves. Due to changes in the structural components, as grazing cycles increase, the interception of 95% of the incident light by the perennial peanut occurs at lower heights. RESUMO O objetivo do presente trabalho foi estudar o perfil produtivo do amendoim forrageiro em um ambiente rotacionado, sob diferentes critérios. Os tratamentos corresponderam à altura de pré-pastejo de 14 e 18cm ou 95% de intercepção de luz (LI), distribuídos em delineamento inteiramente ao acaso. As variáveis estudadas foram massa forrageira, porcentagem de componentes estruturais, densidade da massa forrageira e densidade dos componentes estruturais nos estratos do dossel inferior e superior. O critério de entrada de 18cm de altura, apesar de ter maior massa forrageira, apresentou menor porcentagem de folhas e maior porcentagem de hastes e perdas de forragem. Os critérios de interceptação de luz de 14cm e 95% apresentaram produção similar entre eles e a maior taxa de acumulação de forragem. Em todos os critérios, no estrato superior de pastagem, foi encontrada maior porcentagem de folhas. Os critérios de 95% LI e 14cm de altura apresentaram os melhores desempenhos produtivos. O critério de entrada de 18cm apresentou maior massa de forragem pré-pastagem com menor porcentagem de material morto, mas com maiores perdas de forragem, resultantes de folhas senescentes. Devido às mudanças nos componentes estruturais, à medida que os ciclos de pastagem aumentam, a intercepção de 95% da luz incidente pelo amendoim forrageiro ocorre em alturas mais baixas.

Ultraviolet-B (UV-B) acts as a regulatory stimulus, inducing the dose-dependent biosynthesis of phenolic compounds such as flavonoids at the leaf level. However, the heterogeneity of biosynthesis activation generated within a whole plant is not fully understood until now and cannot be interpreted without quantification of UV-B radiation interception. In this study, we analyzed the spatial UV-B radiation interception of kales (Brassica oleracea L. var. Acephala) grown under supplemental UV-B LED using ray-tracing simulation with 3-dimension-scanned models and leaf optical properties. The UV-B-induced phenolic compounds and flavonoids accumulated more, with higher UV-B interception and younger leaves. To distinguish the effects of UV-B energy and leaf developmental age, the contents were regressed separately and simultaneously. The effect of intercepted UV-B on flavonoid content was 4.9-fold that of leaf age, but the effects on phenolic compound biosynthesis were similar. This study confirmed the feasibility and relevance of UV-B radiation interception analysis and paves the way to explore the physical and physiological base determining the intraindividual distribution of phenolic compound in controlled environments.

Modification of the cotton canopy results in shade avoidance and competition for light, which shows that density and spatial arrangement of cotton have a great impact on light interception. This experiment was conducted in 2018 and 2019 in the experimental field at the Institute of Cotton Research of Chinese Academy of Agricultural Science in Anyang city, Henan Province, China. Six plant densities of cotton variety SCRC28 were used to assess spatial competition for light in cotton populations during the whole growing period. Light interception data were collected and analyzed according to the spatial grid method and the extension of Simpson&rsquo, s 3/8 rule. The results showed that at the bottom of the canopy, greater light interception was observed at high densities than at low densities, while in the external part of the layer of the canopy in the horizontal direction, low light interception was recorded at low densities. Leaf area, aboveground biomass and plant height were obviously correlated with light interception, and the cotton population with a higher density (8.7 plants m&minus, 2) performed best at the light interception competition, and with the highest yield. The results will provide guidance on light management through the optimization of the structure of the canopy to provide more solar radiation and a significant basis by which to improve the management of light and canopy architecture.

Intercropping of two or more crop species increases the efficiency of resource use and often produces a greater yield per unit land area. The relative efficiency of intercropping depends on row configuration, but there is a shortage of modelling-based evaluation of alternative intercropping options due to the inadequacy of standard process-based crop models to simulate resource capture, growth and yield formation when the canopy is spatially structured in strips. We implemented a light interception model for strip crops into the APSIM Classic model and combined it with a quasi-Bayesian approach to derive the model parameters to simulate crop growth and grain yield in maize-soybean strip intercropping. We used 4 years of field data for 5 different row configurations to derive key model parameters for simulation of light interception, LAI dynamics, biomass growth and grain yield of maize and soybean intercrops. Key model parameters (e.g. RUE, k etc.) were found to change with row-spacing and configuration, posing challenges to simulate different configurations with a single parameter set. The potential ranges of these key parameters were derived by constraining the model to observed data. The model can be potentially used to evaluate impact of planting configurations on productivity of strip intercropping systems, but the variability of key model parameters among configuration treatments calls for further in-depth research to improve modelling physiology of strip intercrops.

Intercropping increases crop yields by optimizing light interception and/or use efficiency. Although intercropping combinations and metrics have beenreported, the effects of plant density on light use are not well documented.Here, we examined the light interception and use efficiency in maize-peanutintercropping with different maize plant densities in two row configurations insemiarid dryland agriculture over a two-year period. The field experimentcomprised four cropping systems, i.e., monocropped maize, monocroppedpeanut, maize-peanut intercropping with two rows of maize and four rows ofpeanut, intercropping with four rows of maize and four rows of peanut, andthree maize plant densities (3.0, 4.5 and 6.0 plants m–1 row) in bothmonocropped and intercropping maize. The mean total light interception inintercropping across years and densities was 779 MJ$m–2, 5.5% higher than inmonocropped peanut (737 MJ$m–2) and 7.6% lower than in monocropped maize (843 MJ$m–2). Increasing maize density increased light interception inmonocropped maize but did not affect the total light interception in theintercrops. Across years the LUE of maize was 2.9 g$MJ–1 and was not affectedby cropping system but increased with maize plant density. The LUE of peanutwas enhanced in intercropping, especially in a wetter year. The yield advantageof maize-peanut intercropping resulted mainly from the LUE of peanut. Theseresults will help to optimize agronomic management and system design andprovide evidence for system level light use efficiency in intercropping

Accurate assessments of the yield potential of cassava are needed to analyse yield gaps, define yield targets and set benchmarks for actual yields in Nigeria. This study evaluated the crop model LINTUL-Cassava under assumed potential growth and water-limited conditions in Nigeria. On-farm experiments were conducted at six locations across the three major cassava growing agro-ecologies of Western Africa (Tropical Rainforest – Ogoja and Ikom in Cross River state, Rainforest Transition Savanna – Ekpoma in Edo state and Guinea Savanna – Otukpo in Benue state) during two subsequent seasons (2016 – 2018). Treatments included fertilizer rates calculated to support the assumed potential yields of 90 t fresh storage root yield ha−1 y−1 (equivalent to 32 t DM ha−1, produced in a growing season of 12 months). Light interception (LI) and leaf area index (LAI) were measured each month. The weights of leaves, stems and storage roots were measured at 4 and 8 months after planting and at harvest, and radiation use efficiency (RUE) calculated. The Edo experiment from 2016 was without drought stress and was used to parameterise LINTUL-Cassava and calibrate assimilate partitioning as function of temperature sums. The average fraction of light intercepted during the season was 80 %, with a light extinction coefficient of 0.67 and a RUE of 2.8 g DM MJ−1 intercepted photosynthetically active radiation (IPAR). After calibration, the LINTUL-Cassava model described the crop growth and observed patterns of LAI well in the experiments in Cross River and Edo (2017). Simulated and observed storage root yield at 4 MAP (vegetative period), 8 MAP (mid-season) and at harvest were strongly correlated (R2 of 0.92), with a RMSE of 4.93 t DM ha−1. We ascertained that RUE of cassava was much higher than previously observed in Africa, with an average storage root yield of 39 ± 7 t DM ha−1. Consequently, potential yields are greater and yield gaps larger than expected or previously reported. We conclude that the LINTUL-Cassava model can provide an adequate estimate of storage root yield across major cassava growing agroecological zones in Nigeria under rainfed conditions.

Foliage clumping is a forest canopy structural feature influencing light interception, the inversion of light interception for estimating leaf area index, and photosynthesis rates. In this study we estimated clumping factor values at the branch level from different heights in broadleaf tree species at four sites in two climatic zones (two sites in dry climate and two sites in humid climate) using laser light. We found that branch level foliage distribution tends to be random at dry sites where water is the main limiting resource, and that foliage aggregation at the top of emergent canopy tops increases with branch height at humid site where competition for light is high. Our results suggest that high competition for light leads to the production of large amounts of leaves grouped together in high irradiance areas of the canopy, even though this significantly reduces the light interception efficiency on a per leaf area basis. A comparison of these results with foliage clumping factor values derived at larger spatial scales for two sites (one dry and one humid) revealed a crossover in the scales at which clumping arises: leaves are essentially clumped at the branch level but much less so at the plot level for the humid site, and leaves are clumped at the plot level but not at the branch level for the dry site. This suggests that the occurrence of foliage clumping may be related to the intensity of resource limitation (light or water in this case) and its availability in 3D space. Additional research is required to confirm the role of environmental conditions in determining foliage clumping across various forest biomes. Further confirmation and understanding of causal relations between abiotic stresses and canopy foliage clumping may lead to significant refinement in forest canopy radiative transfer modelling schemes.

Pasture-based livestock production is impacted by management and weather. In pastures, there is conflict between leaf retention for plant growth and leaf harvest for animal nutrition. Defoliated pastures with low light interception (LI) may have a low forage growth rate (FGR), while excessive growth shades leaves, reducing FGR and resulting in an S-shaped regrowth curve. To optimize production, it is best to keep FGR linear. Three studies were conducted to evaluate the impact of management and weather on FGR. Replicated pastures were used to measure FGR when grazed from 25 to 10 cm and allowed to regrow. The impact of alternative defoliation timings and intensities on FGR were studied using clipped treatments at three recovery intervals and two stubble heights. Variability in FGR was studied using a field validated plant growth model. Of the 24 growth periods studied, two displayed exponential, 12 linear and 10 linear-plateau growth. There was no effect of FM on growth curve form. In May and June, LI increased with canopy height, up to 0.93. Stubble height and days of growth impacted FGR with an interaction. There was no treatment impact on root density. Weather caused variation in FGR. A low FGR risk occurs at high elevations, greater risk occurs east of the plateau.

The amount of light intercepted by a tree and its distribution within the canopy is critical in optimizing tree photosynthesis efficiency, carbon partitioning and productivity. Here we compare light relations in experimental high-density mango orchard systems with current commercial orchards. A baseline study of current commercial mango orchards showed a maximum light interception of approximately 67% was reached in trees aged between 26-31 years old, with canopy volume of approximately 15,187 m3/ha. Light interception did not significantly increase beyond 67% regardless of increase in canopy volume per hectare or the increase in orchard age. In these conventional orchards, maximum yields were reached approximately 16 t/ha when light interception was around 49% and as light interception increased above 49%, yields declined. In the high density orchard systems, light interception increased with canopy volume, with high density systems intercepting more available light than medium and low density orchard systems. In 5 year old high-density, espalier trained trees with approximately 5000 m3/ha canopy volume, yields reached close to 50 t/ha at 40% light interception. Trees trained as single leader or espalier had more evenly distributed light in the inner canopy compared to conventionally closed vase trained trees. in current commercial orchards, increasing the canopy volume and light interception above the maximums noted above had no benefit to increase economic returns whereas in high density mango orchards with alternate tree training, yields increases more than four times early in the orchards development. Further productivity gains are likely as the experimental high density have yet to fill their allocated space in the orchard.

The objective of this work was to evaluate the effects of variable and fixed rest periods on the forage production, plant-part composition, and canopy structural characteristics of 'Tifton 85' and 'Jiggs' Bermuda grass (Cynodon spp.) pastures under rotational stocking. The treatments were two grass cultivars (Jiggs and Tifton 85) and two rest periods (grazing starting whenever the canopy reached 25 cm or every 28 days, regardless of canopy height). A completely randomized experimental design, with a 2×2 factorial arrangement (two grass cultivars and two managements), was used with three replicates. The experiment was carried out during the summer growing season in Piracicaba, SP, Brazil. Pre- and post-grazing forage mass chacteristics were evaluated. 'Jiggs' and 'Tifton 85' canopies had similar light interception (96.8%) at pre-grazing, for fixed and variable rest periods; however, they showed different canopy structural characteristics. 'Jiggs' had greater stem proportion, greater canopy height during pre-grazing, and lower leaf area index. There were no differences between strategies and between grass cultivars for total yield, which averaged 16.8 Mg DM ha-1. Fixed and variable rest periods can be used for 'Tifton 85' and 'Jiggs' Bermuda grass. Resumo: O objetivo deste trabalho foi avaliar os efeitos do uso de períodos de descanso fixo e variável sobre a produção de forragem, a composição morfológica e as características estruturais de dosséis dos pastos de capim-bermuda 'Tifton 85' e 'Jiggs' (Cynodon spp.), sob lotação rotacionada. Os tratamentos consistiram de duas cultivares de capim (Jiggs e Tifton 85) e dois períodos de descanso (pastejo sempre que o dossel atingisse 25 cm ou a cada 28 dias, independentemente da altura do dossel). Utilizou-se o delineamento inteiramente casualizado, em arranjo fatorial 2x2 (duas cultivares de capim e dois manejos), com três repetições. O experimento foi realizado durante o cultivo de verão, em Piracicaba, SP. Avaliaram-se as características de massa de forragem no pré- e no pós-pastejo. Dosséis de 'Jiggs' e 'Tifton 85' apresentaram valor similar de interceptação da radiação incidente (em média, 96,8%) no pré-pastejo, nos períodos de descanso fixo e variável; no entanto, apresentaram diferenças quanto às características estruturais do dossel. 'Jiggs' apresentou maior proporção de colmo, maior altura do dossel no pré-pastejo e menor índice de área foliar. Não houve differenças entre as estratégias de pastejo e entre as cultivares quanto ao acúmulo total de forragem, que obteve produção média de 16.8 Mg ha-1 MS. Os períodos de descanso fixo e variável podem ser utilizados para os capins 'Tifton 85' e 'Jiggs'.

One of the major challenges facing rice breeding is to produce ideotype or ideal plant architecture (IPA) to improve canopy radiation use efficiency and hence grain yield. The hybrid japonica rice Jiayou Zhongke 6 (JYZK-6) is one of the benchmark cultivars with IPA characteristics, but the physio-ecological foundation of its high yield potential is still imperfectly understood. In this study, two-year field experiments were conducted using four japonica rice cultivars including JYZK-6 with contrasting canopy structures. A dynamic canopy light interception simulating device was constructed to capture canopy images representing the diurnal dynamics of solar angles throughout the grain-filling stage. Subsequently, leaf to panicle ratio (LPR), a newly developed physiological trait indicative of source-sink relations, was exploited to quantify the light distribution pattern within the rice canopy. The LPRs with high spatio-temporal resolution clearly showed the diurnal changes of light interception within the rice canopy. Genotypic differences in diurnal pattern of LPR were detected among the tested cultivars in both growing seasons, with the amplitude varying with grain-filling stages. Notably, LPR of the IPA cultivar JYZK-6 and its analogue WYJ-29, had a pattern of a V-shaped graph, peaking at sunrise and sunset while dropping to the lowest at noon during middle and late stages. Morphological measurement showed that the V-shaped pattern was associated with the height difference between flag leaf and panicle, panicle curvature, ratio of leaf area to panicle area, as well as the changing solar angles along with the progression of growth stage. This distinguishing feature of light pattern indicates that within the canopy of IPA cultivars, the leaf receives more light in the morning and afternoon whereas the panicle harvests more light at noon. It is inferred that such novel characteristics may provide the IPA cultivar with advantages of reducing midday suppression over the conventional cultivars, while more work is needed to verify this hypothesis. In summary, findings of this study offer a deeper insight into the physio-ecological processes underpinning radiation use efficiency at canopy level, and hence are valuable for breeding programs for ideotype cultivars.

The objective of this work was to evaluate the variations in root dry matter mass (RDM) and the percentage distribution (PD) of the root density of Florico grass (Cynodon nlemfuensis) in the 0-40-cm soil layer, when managed under different grazing strategies. Two defoliation frequencies (90 and 95% light interception, as the criterion for allowing animals in the paddock) and two defoliation severities (post-grazing heights of 20 or 30 cm) were assessed. Four seasonal evaluations of the root system were performed between the winter of 2012 and the autumn of 2013, using the monolith and trench excavation technique, collecting 1-dm3 samples from soil surface down to a depth of 40 cm, in four sequential extracts of 10 cm each. Lower RDM values (0.69 g dm-3) were obtained in winter, with the four grazing strategies, whereas higher values were observed in spring (1.64 g dm-3), for the 30-cm post-grazing residue, and in autumn (1.63 g dm-3) for the 20 cm post-grazing residue, regardless of the light interception value. Between 52 and 66% of the RDM density was observed in the 10-cm layer, for all four grazing strategies, in all seasons.

An important milestone in Argentina peanut (Arachis hypogaea L.) breeding was the shift in the 1970s from cultivars with erect growth habit (CEGH) to cultivars with procumbent growth habit (CPGH). CPGH improved seed yield but also lengthened growth cycle. However, there is no information if the change in growth habit (GH) may have involved a phenotype with a canopy architecture that makes a differential capture and use of resources. Field experiments were performed to compute leaf are index (LAI), the fraction of incident photosynthetically active radiation intercepted by the crop (fIPAR), biomass production, radiation use efficiency (RUE) and harvest index (HI). Four cultivars of each GH, released between 1948 and 2004, were evaluated. The LAI was always larger among CPGH than among CEGH. Only the former reached the critical LAI. Likewise, fIPAR of CPGH was higher than that of CEGH throughout the crop cycle. Maximum fIPAR differed between GHs (P CPGH), Years (Year 1 > Year 2) and GH × Year (CPGH Year 1 > CPGH Year 2 = CEGH Year 2 = CEGH Year 1). CPGH improved pod yield (+64%), seed yield (+101%), HI of pods (+29) and HI of seeds (+56%) respect to CEGH. Considering the effects of GH on the capacity of cultivars for achieving the critical LAI with current crop management, future research should focus on alternative sowing patterns (e.g., reduced row spacing among CEGH). Fil: Haro Juarez, Ricardo Javier. Instituto Nacional de Tecnología Agropecuaria. Centro Regional Córdoba. Estación Experimental Agropecuaria Manfredi; Argentina Fil: Baldessari, Jorge. Instituto Nacional de Tecnología Agropecuaria. Centro Regional Córdoba. Estación Experimental Agropecuaria Manfredi; Argentina Fil: Otegui, Maria Elena. Universidad de Buenos Aires. Facultad de Agronomía; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina

We studied the effects of potassium (K) and its interactions with nitrogen (N), phosphorus (P) and harvest time on the productivity, water use efficiency (WUE) and radiation use efficiency (RUE) of cassava under rain-fed conditions. A field experiment was conducted during two consecutive years on K-deficient soils in Djakakope and on relatively K-rich soils in Sevekpota in Southern Togo, West Africa. Fifteen fertiliser combinations involving K and N rates of 0, 50 and 100 kg ha−1 each, and P rates of 0, 20 and 40 kg ha[sbnd]1 were tested. Monthly measurements of leaf area index from 3 to 11 months after planting and daily weather data were used to estimate light interception, RUE, potential water transpiration and WUE of cassava. Overall WUE was 3.22 g dry matter kg−1 water transpired and RUE was 1.16 g dry matter MJ−1 intercepted photosynthetic active radiation (PAR). On the K-deficient soils, application of K increased WUE and RUE by 36–41% compared with 2.81 g dry matter kg−1 water transpired and 0.92 g dry matter MJ−1 intercepted PAR achieved without K, respectively. However, the effect of K on cassava growth depended on N availability. Applications of N had relatively weak effects on RUE and WUE, but induced a positive correlation between RUE/WUE and K mass fractions in the plant, and increased the cumulative amount of light intercepted by 11–51%, and the cumulative amount of water transpired through increased leaf area by 13–61%. No significant effect of P on WUE and RUE was observed. Increased cassava yields could be achieved under rain-fed conditions in West Africa through enhanced K management to increase RUE and WUE, along with sufficient N supply for improved light interception and water transpiration by the crop.

Background and Aims: Intercropping systems contain two or more species simultaneously in close proximity. Due to contrasting features of the component crops, quantification of the light environment and photosynthetic productivity is extremely difficult. However it is an essential component of productivity. Here, a low-tech but high resolution method is presented that can be applied to single and multi-species cropping systems, to facilitate characterisation of the light environment. Different row layouts of an intercrop consisting of Bambara groundnut (Vigna subterranea (L.) Verdc.) and Proso millet (Panicum miliaceum) have been used as an example and the new opportunities presented by this approach have been analysed. Methods: Three-dimensional plant reconstruction, based on stereocameras, combined with ray-tracing was implemented to explore the light environment within the Bambara groundnut-Proso millet intercropping system and associated monocrops. Gas exchange data was used to predict the total carbon gain of each component crop. Key Results: The shading influence of the tall Proso millet on the shorter Bambara groundnut results in a reduction in total canopy light interception and carbon gain. However, the increased leaf area index (LAI) of Proso millet, higher photosynthetic potential due to the C4 pathway and sub-optimal photosynthetic acclimation of Bambara groundnut to shade means that increasing the number of rows of millet will lead to greater light interception and carbon gain per unit ground area, despite Bambara groundnut intercepting more light per unit leaf area. Conclusions: Three-dimensional reconstruction combined with ray tracing provides a novel, accurate method of exploring the light environment within an intercrop that does not require difficult measurements of light interception and data-intensive manual reconstruction, especially for such systems with inherently high spatial possibilities. It provides new opportunities for calculating potential productivity within multispecies cropping systems; enables the quantification of dynamic physiological differences between crops grown as monoculture and those within intercrops or; enables the prediction of new productive combinations of previously untested crops.

The objective of this work was to evaluate the effect of intercropping systems between corn and tropical forages, at different cutting heights, on silage production, light interception, land use efficiency, intercropping competition factors, and pasture production. In the 2010/2011 and 2011/2012 crop seasons, two cultivation modalities were evaluated in the summer/autumn - monocropped corn with residual regrowth of signal grass (Urochloa decumbens) from the soil seed bank and corn intercropped with palisade grass (U. brizantha 'Marandu') -, in a factorial arrangement with two cutting heights for silage production - 0.20 and 0.45 m. After corn silage harvest, the forages were grazed by lambs in a semi-feedlot system, in the winter/spring. Monocropped corn and 0.45-m cutting height both reduced dry matter yield for silage. Corn intercropped with palisade grass improved land use efficiency from 13 to 31% compared with monocropped crop, with land equivalent ratio greater than 1. Palisade grass showed higher light interception than signal grass over the intercrop period with corn and provided greater forage yield for lambs to graze during winter/spring. Corn intercropped with palisade grass, compared with monocropped corn, especially at the cutting height of 0.45 m, is a viable option for improving silage and pasture production, as well as land use efficiency in the integrated crop-livestock system. Resumo: O objetivo deste trabalho foi avaliar o efeito de cultivos consorciados entre milho e forrageiras tropicais, em diferentes alturas de corte, sobre a produção de silagem, a interceptação luminosa, a eficiência de uso da terra, os fatores de competição do consórcio e a produção da pastagem. Foram avaliados, nas safras 2010/2011 e 2011/2012, duas modalidades de cultivo no verão/outono - monocultivo de milho com rebrota do banco de sementes de capim-braquiária (Urochloa decumbens) e milho consorciado com capim-marandu (U. brizantha 'Marandu') -, em arranjo fatorial com duas alturas de corte para ensilagem - 0,20 e 0,45 m. Após a colheita do milho para ensilagem, as forragens foram pastejadas por cordeiros semi-confinados, no inverno/primavera. O monocultivo do milho e a altura de corte a 0,45 m reduziram a produtividade de matéria seca para ensilagem. O milho consorciado com capim-marandu melhorou a eficiência de uso da terra de 13 para 31%, comparado ao monocultivo do milho, com relação de equivalência de uso da terra maior que 1. O capim-marandu apresentou maior interceptação luminosa que o capim-braquiária, ao longo do período de consórcio com o milho, e proporcionou maior produção de forragem para o pastejo pelos cordeiros durante o inverno/primavera. O milho consorciado com capim-marandu, comparado ao monocultivo do milho, principalmente na altura de corte de 0,45 m, é uma opção viável para aumentar a produção de silagem e pastagem, bem como a eficiência de uso da terra em sistema de integração lavoura-pecuária.

Biodiversity affects ecosystem functioning in forests by, for example, enhancing growth and altering the forest structure towards greater complexity with cascading effects on other processes and trophic levels. Complexity in forest canopy could enhance light interception and form a link between diversity and productivity in polyculture forests, but the effect of canopy structure on light interception is rarely directly measured. We modelled the canopy surface structure of a tree diversity experiment by photographing it using unmanned aerial vehicle (UAV) and combining the photos into a digital elevation model with photogrammetry tools. We analysed the effects of tree diversity and functional diversity on canopy structural complexity and light interception with a structural equation model. Our results show that: a) increased structural complexity of the canopy reduces light interception, whereas b) tree diversity increases the structural complexity of the canopy, and has a dual impact on light interception. Tree diversity decreased light interception through the structural complexity of the canopy but increased it probably through canopy packing and crown complementarity. However, the effects of both tree diversity and structural complexity of canopy were smaller than the effect of the functional identities of the tree species, especially the differences between deciduous and evergreen trees. We conclude that more complexity in canopy structure can be gained through increased tree diversity, but complex canopy structure does not increase light interception in young forests.

Light interception in plant canopies is most commonly estimated using a simple one-dimensional turbid medium model (i.e., Beer's law). Inherent in this class of models are assumptions that vegetation is uniformly distributed in space (homogeneous) and in many cases that vegetation orientation is uniformly distributed (isotropic). It is known that these assumptions are violated in a wide range of canopies, as real canopies commonly have heterogeneity at multiple scales and almost always have highly anisotropic leaf angle distributions. However, it is not quantitatively known under what conditions these assumptions become problematic given the difficulty of robustly evaluating model results for a range of canopy architectures. In this study, assumptions of vegetation homogeneity and isotropy were evaluated under clear sky conditions for a range of virtually-generated crop canopies with the aid of a detailed three-dimensional, leaf-resolving radiation model. Results showed that Beer's law consistently over predicted light interception for all canopy configurations. For canopies where the plant spacing was comparable to the plant height, Beer's law performed poorly, and over predicted daily intercepted sunlight by up to ∼115%. For vegetation with a highly anisotropic leaf inclination distribution but a relatively isotropic leaf azimuth distribution, the assumption of canopy isotropy (i.e., G = 0.5) resulted in relatively small errors. However, if leaf elevation and azimuth were both highly anisotropic, the assumption of canopy isotropy could introduce significant errors depending on the orientation of the azimuthal anisotropy with respect to the sun's path.

International audience; Breeders select for yield, thereby indirectly selecting for traits that contribute to it. We tested if breeding has affected a range of traits involved in plant architecture and light interception, via the analysis of a panel of 60 maize hybrids released from 1950 to 2015. This was based on novel traits calculated from reconstructions derived from a phenotyping platform. The contribution of these traits to light interception was assessed in virtual field canopies composed of 3D plant reconstructions, with a model tested in a real field. Two categories of traits had different contributions to genetic progress. (a) The vertical distribution of leaf area had a high heritability and showed a marked trend over generations of selection. Leaf area tended to be located at lower positions in the canopy, thereby improving light penetration and distribution in the canopy. This potentially increased the carbon availability to ears, via the amount of light absorbed by the intermediate canopy layer. (b) Neither the horizontal distribution of leaves in the relation to plant rows nor the response of light interception to plant density showed appreciable trends with generations. Hence, among many architectural traits, the vertical distribution of leaf area was the main indirect target of selection.

International audience; The impact of vegetation structure on the absorption of shortwave radiation in Earth System Models (ESMs) is potentially important for accurate modeling of the carbon cycle and hence climate projections. A proportion of incident shortwave radiation is used by plants to photosynthesize and canopy structure has a direct impact on the fraction of this radiation which is absorbed. This paper evaluates how modeled carbon assimilation of the terrestrial biosphere is impacted when clumping derived from satellite data is incorporated. We evaluated impacts of clumping on photosynthesis using the Joint UK Land Environment Simulator, the land surface scheme of the UK Earth System Model. At the global level, Gross Primary Productivity (GPP) increased by 5.53 +/- 1.02 PgC/year with the strongest absolute increase in the tropics. This is contrary to previous studies that have shown a decrease in photosynthesis when similar clumping data sets have been used to modify light interception in models. In our study additional transmission of light through upper canopy layers leads to enhanced absorption in lower layers in which photosynthesis tends to be light limited. We show that this result is related to the complexity of canopy scheme being used.

Combining conservation tillage with legumes grown as a green manure is an increasingly popular practice for crop production in the U.S. Southern Great Plains. This study investigated interactions between system of tillage (no-till vs. conventional tillage) and source and amounts of nitrogen (N) fertilization (0, 45 and 90 kg N ha–1 yr–1 in inorganic N fertilizer, and cowpea as a green manure) on radiation use efficiency, and dry matter (DM) yield of winter wheat. The study was conducted at two sites during the 2016–2017 growing season of winter wheat. Fraction of intercepted photosynthetically active radiation (fPAR) was derived by measurements of canopy spectral reflectance taken at 1–2 weeks intervals as ratio vegetation index (RVI). Total cumulative intercepted fPAR (IPAR) during the cropping period was calculated as a product of half global radiation and fPAR. Radiation use efficiency (RUE) was calculated as the ratio of biomass yield and IPAR. At both sites, N treatments had stronger influences on crop growth than tillage systems. The RVI, IPAR and DM yield were generally higher under 90-N treatments followed by 45-N treatment. Responses of cowpea and control treatments were similar and the lowest. Radiation use efficiency was not influenced by tillage systems or N treatments.

The aim of this paper is to investigate the minimal level of detail of the tree geometry reconstruction required to enable an accurate estimate of the evaporative cooling effect of an individual tree. The Functional Structural Plant Modeling approach, which links the 3D tree structure to its functioning, is used to investigate the impact of the level of detail of a tree reconstruction on its simulated transpiration. Based on terrestrial laser scanning point cloud data of a nine-meter-high silver linden tree (Tilia tomentosa Moench), several methods of reconstruction of its crown were considered. They can be divided into three groups: (i) tree branching structure reconstructions where leafy shoots are reconstructed; (ii) envelope reconstructions such as 3D convex/concave envelopes; and (iii) voxel reconstructions where leaves are uniformly distributed within the given volume. Based on these methods, several mock-ups of resolved tree crowns from low to high level of details were created. The cooling performance of each tree mock-up was compared by simulating its transpiration rate with a validated 3D ecophysiological model based on the turbid medium approach. The resulting mock-ups differ in several characteristics related to tree metrics and light interception: volume, projected leaf area, leaf area index, leaf area density, leaf clumping and silhouette-to-total area ratio. An inter-comparison of the transpiration rates provided by these mock-ups shows that tree branching structure reconstruction methods perform better than envelope computation methods and that these differences are related to the light interception property of the reconstructed trees. This study provides guidelines to determine which structural characteristics of tree crowns must be measured and taken into account in order to carry out accurate estimates of the transpiration rates of individual trees. Financement INTERREG

Background Within-canopy interception of photosynthetically active radiation (PAR) impacts yield and other agronomic traits in cotton (Gossypium hirsutum L.). Field experiments were conducted to investigate the influence of 6 cotton varieties (they belong to 3 different plant types) on yield, yield distribution, light interception (LI), LI distribution and the relationship between yield formation and LI in Anyang, Henan, in 2014 and 2015. Result The results showed that cotton cultivars with long branches (loose-type) intercepted more LI than did cultivars with short branches (compact-type), due to increased LI in the middle and upper canopy. Although loose-type varieties had greater LI, they did not yield significantly higher than compact-type varieties, due to decreased harvest index. Therefore, improving the harvest index by adjusting the source-to-sink relationship may further increase cotton yield for loose-type cotton. In addition, there was a positive relationship between reproductive organ biomass accumulation and canopy-accumulated LI, indicating that enhancing LI is important for yield improvement for each cultivar. Furthermore, yield distribution within the canopy was significantly linearly related to vertical LI distribution. Conclusion Therefore, optimizing canopy structure of different plant type and subsequently optimizing LI distribution within the cotton canopy can effectively enhance the yield.

Canopy architecture determines the light distribution and light interception in the canopy. Reasonable shaping and pruning can optimize tree structure; maximize the utilization of land, space and light energy; and lay the foundation for achieving early fruiting, high yield, health and longevity. Due to the complexity of loquat canopy architecture and the multi-year period of tree growth, the variables needed for experiments in canopy type training are hardly accessible through field measurements. In this paper, we concentrated on exploring the relationship between branching angle and light interception using a three-dimensional (3D) canopy model in loquat (Eriobotrya japonica Lindl). First, detailed 3D models of loquat trees were built by integrating branch and organ models. Second, the morphological models of different loquat trees were constructed by interactive editing. Third, the 3D individual-tree modeling software LSTree integrated with the OpenGL shadow technique, a radiosity model and a modified rectangular hyperbola model was used to calculate the silhouette to total area ratio, the distribution of photosynthetically active radiation within canopies and the net photosynthetic rate, respectively. Finally, the influence of loquat tree organ organization on the light interception of the trees was analyzed with different parameters. If the single branch angle between the level 2 scaffold branch and trunk is approximately 15° and the angles among the level 2 scaffold branches range from 60° to 90°, then a better light distribution can be obtained. The results showed that the branching angle has a significant impact on light interception, which is useful for grower manipulation of trees, e.g., shoot bending (scaffold branch angle). Based on this conclusion, a reasonable tree structure was selected for intercepting light. This quantitative simulation and analytical method provides a new digital and visual method that can aid in the design of tree architecture.

International audience; Mango is a tropical crop characterized by the heterogeneity in size and quality of its fruits at harvest. Source-sink relationships have been identified as a key factor on these traits. Consequently, it is of main importance to characterize foliage distribution of the mango tree over time to assess its ability to produce fruits. Mango tree is an evergreen tree and its leaves last for several years. While leaf appearance has been well characterized, leaf mortality has been poorly studied for now. The goal of this work was to characterize leaf mortality in the mango tree, and in particular the influence of age and light availability on this phenomenon. We digitized the 3D architecture of a 13-year-old mango tree with foliage information. Using this 3D mockup, we characterized the number of leaves per growth units at different depths in the structure and related growth units depth with their age. Using a model of light interception, we then estimated the amount of light intercepted by the different growth units of the tree and tested its influence on their number of leaves. Leaves were present up to the fifth growth unit from the axis end. Leaf mortality drastically increased with growth unit depth. For each level of depth, light environment had a significant influence on the number of leaves remaining on the growth unit. Leaves in unfavourable light conditions had a 2-time higher probability to fall compared to the leaves in the most favourable light conditions. The resulting leaf mortality probability will be included into a functional-structural plant model (FSPM) to simulate faithfully foliage distribution within the tree. Using this FSPM that simulates fruit growth, it will be possible to study the impact of the foliage distribution on the heterogeneity of fruit production and quality.

The wind-induced motion of the foliage in a tree is an important phenomenon both for biological issues (photosynthesis, pathogens development or herbivory) and for more subtle effects such as on wi-fi transmission or animal communication. Such foliage motion results from a combination of the motion of the branches that support the leaves, and of the motion of the leaves relative to the branches. Individual leaf dynamics relative to the branch, and branch dynamics have usually been studied separately. Here, in an experimental study on a whole tree in a large-scale wind tunnel, we present the first empirical evidence that foliage motion is actually dominated by individual leaf flutter at low wind velocities, and by branch turbulence buffeting responses at higher velocities. The transition between the two regimes is related to a weak dependence of leaf flutter on wind velocity, while branch turbulent buffeting is strongly dependent on it. Quantitative comparisons with existing engineering-based models of leaf and branch motion confirm the prevalence of these two mechanisms. Simultaneous measurements of the wind-induced drag on the tree and of the light interception by the foliage show the role of an additional mechanism, reconfiguration, whereby leaves bend and overlap, limiting individual leaf flutter. We then discuss the consequences of these findings on the role of wind-mediated phenomena.

The control of soil acidity through liming and the adoption of adequate management are essential to the maintenance of pastures productivity. The morphogenetic and structural characteristics of Urochloa decumbens cv. Basilisk, in canopies with (0.7 t ha-1 and 1.0 t ha-1) or without liming and subjected to severe or lenient cuttings (stubble corresponding to 40 % or 60 % of the pre-harvest height, respectively), were evaluated throughout regrowth, during late spring and summer. Treatments were distributed in a 3 x 2 factorial arrangement, in a completely randomized block design, with 3 replications (80 m2 plots). Increased liming rates do not result in benefits to the herbage mass, tiller population density or a faster canopy recovering. The average tiller weight decreases, while the duration of regrowth linearly increases, with increasing liming rates, particularly in late spring. Stem elongation and leaf senescence rates increase and leaf elongation rates decrease from the 15th day of regrowth, regardless of the liming rates or defoliation severities. Post-harvest heights ranging from 40 % to 60 % of the pre-harvest height showed to be within the tolerance limits to defoliation of U. decumbens. The liming rates adopted had only marginal impacts on the morphogenetic characteristics of U. decumbens. RESUMO O controle da acidez do solo por meio de calagem, aliado à adoção de manejo correto, são fatores essenciais para a manutenção da produtividade de pastagens. Avaliaram-se, ao longo da rebrotação, no final da primavera e verão, as características morfogênicas e estruturais da Urochloa decumbens cv. Basilisk, em dosséis que receberam (0,7 t ha-1 e 1,0 t ha-1) ou não calagem, submetidos a cortes severos ou lenientes (resíduo correspondente a 40 % ou 60 % da altura pré-corte, respectivamente). Os tratamentos foram distribuídos em arranjo fatorial 3 x 2, em delineamento de blocos completos casualizados, com 3 repetições (parcelas de 80 m2). O aumento nas doses de calcário não resulta em maior massa de forragem, densidade populacional de perfilhos ou recuperação mais rápida do dossel. O peso médio de perfilhos diminui, enquanto a duração da rebrotação aumenta linearmente, com aumentos nas doses de calcário, particularmente no final da primavera. Aumentos nas taxas de alongamento de colmos e senescência de folhas e diminuição nas taxas de alongamento de folhas ocorrem a partir do 15º dia de rebrotação, independentemente da quantidade de calcário ou severidade de corte. Severidades de corte variando de 40 % a 60 % da altura pré-corte mostraram-se dentro dos limites de tolerância à desfolhação em U. decumbens. As doses de calcário adotadas tiveram apenas impactos marginais nas características morfogenênicas de U. decumbens.

The paradigm of functional-structural models (FSPM) assumes that studying the detailed organisation of plant structure allows a better understanding of functional processes; in particular the way plants capture light for performing photosynthesis. However, much attention must be paid toward the consistency between virtual plants and plants in the field in terms of size and geometry to accurately evaluate light interception. This paper thus aimed at i) assessing the capacity of a 3D architectural model based on oil palms (Elaeis guineensis) to accurately represent plants structural characteristics at both the scale of the individual plant and the cultivated plot and ii) employing the validated 3D mock-ups to investigate how light interception efficiency varies among progenies that exhibit different architectures. Innovative indicators related to plant geometry and topology were derived from terrestrial LiDAR scanners (TLS) and hemispherical photographs (HP) in order to assess a 3D plant model. Indicators such as plant height, width and volume, gap fractions and solid angle projections were established from field measurements and were compared to equivalent indicators that had been extracted from virtual TLS (VTLS) and virtual HP (VHP) simulated on 3D mock-ups. Indicators were then evaluated for their significance in terms of light interception. Progeny effect on light interception efficiency was finally evaluated for five progenies. The structural indicators estimated from VTLS and VHP were significantly correlated with equivalent indicators estimated from TLS and HP, respectively, and with simulated outputs related to light interception. Light interception efficiencies estimated from validated 3D mock-ups differed significantly among the five progenies under study, most notably along plant development. Our results highlight the relevance of combining TLS- and HP-derived indicators to evaluate the reliability of virtual 3D reconstruction of plants in relation to light capture, at both the plant and plot scales. The study paves the way for further investigations aiming at unravelling the relationships between oil palm architecture and the physiological processes driving its production.(Resume d'auteur)

Resumo Este trabalho foi desenvolvido de 25 de fevereiro a 01 de julho de 2012 para recomendar a(s) dose(s) de nitrogênio e o(s) período(s) de diferimento que resultam em pastos diferidos de Brachiaria brizantha cv. Piatã (capim-piatã) com características estruturais adequadas ao consumo animal. Foram avaliadas combinações entre períodos de diferimento e condições de adubação nitrogenada. Os períodos de diferimento foram longo (127 dias) e curto (79 dias). As doses de nitrogênio foram de 0, 40, 80 e 120 kg/ha. O delineamento experimental foi de blocos casualizados, com três repetições. O índice de área foliar (IAF) e a interceptação luminosa (IL) aumentaram com a aplicação de nitrogênio. Na ausência ou dose pequena de nitrogênio, o pasto diferido por curto período apresentou IAF e IL inferiores ao manejado com longo período de diferimento. A dose de nitrogênio só influenciou a densidade de perfilhos basais vegetativos. O menor período de diferimento resultou em maiores números de perfilhos basais e aéreos vegetativos, assim como número inferior de perfilho basal reprodutivo. O nitrogênio aumentou o comprimento da lâmina foliar e do colmo do perfilho vegetativo. Longo período de diferimento resultou em colmo e lâmina foliar mais compridos e maior número de folhas mortas. O capim-piatã pode ser diferido por 80 dias, com aplicação de 80 kg/ha de nitrogênio no início do período de diferimento. Abstract This study was conducted from Feb. 25th, 2012 to Jul. 1st, 2012 to recommend nitrogen doses and deferment periods that result in deferred Brachiaria brizantha cv. Piatã (piatã grass) pastures with structural characteristics suitable for animal consumption. Combinations were evaluated between deferment periods and nitrogen fertilization conditions. The deferment periods were long (127 days) and short (79 days). Nitrogen doses were 0, 40, 80, and 120 kg/ha. The experimental design was a randomized block with three replications. The leaf area index (LAI) and light interception (LI) increased with the application of nitrogen. In the absence or at a small nitrogen dose, pasture deferred for short periods presented lower LAI and LI than pasture managed with long deferment period. The nitrogen only influenced the density of vegetative basal tillers. The lower deferment period resulted in a greater number of basal tillers and vegetative air, as well as fewer reproductive basal tillers. Nitrogen increased the length of the leaf blade and the vegetative tiller stem. Long deferral period resulted in longer stem and leaf blade and a larger number of dead leaves. Piatã grass can be deferred for 80 days, with application of 80 kg/ha of nitrogen at the beginning of the deferment period.

Made available in DSpace on 2018-12-11T16:46:49Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-01-01 This study compared the effect of residual leaf area index (rLAI) on the spatial distribution of morphological components of Tifton 85 (Cynodon spp.) pastures and the ingestive behaviour of grazing sheep. Also, it was investigated whether any specific correlation could be found between pasture structural characteristics and sheep ingestive behaviour. Four rLAI treatments (0.8; 1.4; 2.0 and 2.6) with four replications were evaluated per period. Sheep grazed under rotational stocking management and they grazed for 4 days in each pasture while pasture regrowth period was determined by the 95% light interception requirement. Pasture structure was evaluated using inclined point-quadrat, LAI estimates, light interception and leaf:stem ratio. The 2.6 rLAI yielded the highest proportion of dead material in the lower canopy. In the post-grazing period the proportion of leaves increased with increasing rLAI, especially on the canopy surface during the rainy season. In the pre-grazing average pasture height ranged between 19 and 26 cm with dead material and stem observed up to the canopy surface in the dry season. The animals grazed longer on the last day (89.72%) compared with the first day (80.25%) in the dry season. However, they spent less time (11.45%) ruminating in the dry season compared with the rainy season (15.38%), regardless of the grazing day. Grazing time decreased and rumination time increased as rLAI increased. Sheep grazing time correlated negatively with pasture height, before and after grazing. The sheep tend to graze longer on Tifton 85 pastures when rLAI was lower and forage supply was possibly less as on the last grazing day and in the dry season. Animal Science Department São Paulo State University (UNESP) Exact Sciences Department São Paulo State University (UNESP) Animal Science Department São Paulo State University (UNESP) Exact Sciences Department São Paulo State University (UNESP)

Resumo Objetivou-se com este trabalho avaliar o efeito de diferentes frequências de desfolhação em períodos fixos sob as características estruturais e produtivas do dossel de capim-Tanzânia (Panicum maximum Jacq) em condições climáticas Am no ano de 2014. O delineamento experimental foi em blocos casualizados com seis tratamentos correspondentes a seis frequências de desfolhação (14; 21; 28; 35; 42 e 49 dias) e cinco repetições e os dados foram submetidos a análise de regressão. A interceptação luminosa (IL) aumentou (P

Objetivou-se com o presente trabalho avaliar o acúmulo de forragem e a estrutura do dossel do capim-Xaraés submetido a cinco alturas de resíduos (10; 20; 30; 40 e 50 cm) com intervalo de corte baseado na interceptação luminosa (IL) pelo dossel durante a rebrotação (95% de IL). O experimento foi conduzido no Setor de Forragicultura do Centro de Ciências Agrárias e Ambientais da Universidade Federal do Maranhão (UFMA), em Chapadinha, no período de março a novembro de 2011. Utilizou-se o delineamento inteiramente casualizado, com cinco repetições. O período de descanso baseado na estratégia de 95% de IL variou em função das alturas de resíduo e época do ano. Houve efeito das alturas de cortes para a produção de forragem, a densidade populacional de perfilhos, o número de perfilhos vivos, altura do dossel e densidade volumétrica de forragem. Apenas a relação folha/colmo e a taxa de acúmulo de forragem não foram influenciadas pelos fatores estudados, no período chuvoso de 2011. No período da seca, os pastos de capim-Xaraés foram afetados de forma negativa para todas as características avaliadas, independente das alturas de resíduo. De maneira geral, intensidades de cortes mais drásticas (10 cm), promovem maior produção de forragem, maior DPP, maior número de perfilhos mortos e maior densidade, no entanto, resulta em menor número de cortes e maior intervalo entre corte. O inverso ocorre com intensidades de cortes mais lenientes (40 e 50 cm). The aim of this work was to evaluate the forage accumulation and sward structure of Xaraés grass subjected to five residue heights (10; 20; 30; 40 and 50 cm) with cutting interval based on light interception (LI) by sward during the regrowth (95% of LI). The experiment was conducted in forage production sector of the Agrarian and Environmental Sciences Center of the Federal University of Maranhão, in Chapadinha, in the period from March to November of 2011. A completely randomized design with five repetitions was used. The rest period based on 95% LI strategy varied according to the residue heights and time of year. There was effect of cutting heights for the production of forage, the density of tillers, the number of living tillers, sward height and volumetric density of forage. Only the leaf/stem ratio and the rate of forage accumulation were not influenced by the factors studied, in the rainy season of 2011. In the dry season, the pastures of Xaraés grass were affected in a negative way for all features evaluated, regardless of heights of residue. In General, more drastic cuts intensities (10 cm) promote higher forage production, greater density of tillers, larger number of dead tillers and higher density, however, results in less number of cuts and greater interval between cuts. The reverse occurs with more lenient cuts intensities (40 and 50 cm).

Detailed analysis of canopy structural heterogeneity is an essential step in conducting parameters for a canopy structural model. This paper aims to analyze the structural heterogeneity of a cucumber ( Cucumis sativus L.) canopy by means of analyzing leaf distribution in a greenhouse environment with natural sunlight and also to assess the effect of structural canopy heterogeneity on light interception and photosynthesis. Two experiments and four measurements were carried out in autumn 2011 and spring 2012. A static virtual three-dimensional (3D) canopy structure was reconstructed using a 3D digitizing method. The diurnal variation of photosynthesis rate was measured using CIRAS-2 photosynthesis system. The results showed that, leaf azimuth as tested with the Rayleigh-test was homogeneous at vine tip over stage but turned heterogeneous at fruit harvest stage. After eliminating the influence of the environment on the azimuth using the von Mises-Fisher method, the angle between two successive leaves was 144°; at the same time, a rule for the azimuth distribution in the canopy was established, stating that the azimuth distribution in cucumber followed a law which was positive spin and anti-spin. Leaf elevation angle of south-oriented leaves was on average 13.8° higher than that of north-oriented leaves. The horizontal distribution of light interception and photosynthesis differed significantly between differently oriented leaves. East- and west-oriented leaves exhibited the highest photosynthetic rate. In conclusion, detailed analysis of canopy structural heterogeneity in this study indicated that leaf azimuth and elevation angle were heterogeneous in cucumber canopy and they should be explicitly described as they have a great impact both on light distribution and photosynthesis.

Summary A dynamic function–structural plant model of tomato is proposed and evaluated under two temperature regimes. The model reveals that architectural traits may affect shoot dry mass by up to 20%., There is increasing interest in evaluating the environmental effects on crop architectural traits and yield improvement. However, crop models describing the dynamic changes in canopy structure with environmental conditions and the complex interactions between canopy structure, light interception, and dry mass production are only gradually emerging. Using tomato (Solanum lycopersicum L.) as a model crop, a dynamic functional–structural plant model (FSPM) was constructed, parameterized, and evaluated to analyse the effects of temperature on architectural traits, which strongly influence canopy light interception and shoot dry mass. The FSPM predicted the organ growth, organ size, and shoot dry mass over time with high accuracy (>85%). Analyses of this FSPM showed that, in comparison with the reference canopy, shoot dry mass may be affected by leaf angle by as much as 20%, leaf curvature by up to 7%, the leaf length:width ratio by up to 5%, internode length by up to 9%, and curvature ratios and leaf arrangement by up to 6%. Tomato canopies at low temperature had higher canopy density and were more clumped due to higher leaf area and shorter internodes. Interestingly, dry mass production and light interception of the clumped canopy were more sensitive to changes in architectural traits. The complex interactions between architectural traits, canopy light interception, dry mass production, and environmental conditions can be studied by the dynamic FSPM, which may serve as a tool for designing a canopy structure which is ‘ideal’ in a given environment.

International audience; Background and Aims Predicting light partitioning in crop mixtures is a critical step in improving the productivity of such complex systems, and light interception has been shown to be closely linked to plant architecture. The aim of the present work was to analyse the relationships between plant architecture and light partitioning within wheat –pea (Triticum aestivum– Pisum sativum) mixtures. An existing model for wheat was utilized and a new model for pea morphogenesis was developed. Both models were then used to assess the effects of architectural variations in light partitioning. Methods First, a deterministic model (L-Pea) was developed in order to obtain dynamic reconstructions of pea architecture. The L-Pea model is based on L-systems formalism and consists of modules for 'vegetative develop-ment' and 'organ extension'. A tripartite simulator was then built up from pea and wheat models interfaced with a radiative transfer model. Architectural parameters from both plant models, selected on the basis of their contribution to leaf area index (LAI), height and leaf geometry, were then modified in order to generate contrasting architectures of wheat and pea. Key results By scaling down the analysis to the organ level, it could be shown that the number of branches/tillers and length of internodes significantly determined the partitioning of light within mixtures. Temporal relationships between light partitioning and the LAI and height of the different species showed that light capture was mainly related to the architectural traits involved in plant LAI during the early stages of development, and in plant height during the onset of interspecific competition. Conclusions In silico experiments enabled the study of the intrinsic effects of architectural parameters on the par-titioning of light in crop mixtures of wheat and pea. The findings show that plant architecture is an important criterion for the identification/breeding of plant ideotypes, particularly with respect to light partitioning.

Canopy photosynthesis has typically been estimated using mathematical models that have the following assumptions: the light interception inside the canopy exponentially declines with the canopy depth, and the photosynthetic capacity is affected by light interception as a result of acclimation. However, in actual situations, light interception in the canopy is quite heterogenous depending on environmental factors such as the location, microclimate, leaf area index, and canopy architecture. It is important to apply these factors in an analysis. The objective of the current study is to estimate the canopy photosynthesis of paprika (Capsicum annuum L.) with an analysis of by simulating the intercepted irradiation of the canopy using a 3D ray-tracing and photosynthetic capacity in each layer. By inputting the structural data of an actual plant, the 3D architecture of paprika was reconstructed using graphic software (Houdini FX, FX, Canada). The light curves and A/C i curve of each layer were measured to parameterize the Farquhar, von Caemmerer, and Berry (FvCB) model. The difference in photosynthetic capacity within the canopy was observed. With the intercepted irradiation data and photosynthetic parameters of each layer, the values of an entire plant's photosynthesis rate were estimated by integrating the calculated photosynthesis rate at each layer. The estimated photosynthesis rate of an entire plant showed good agreement with the measured plant using a closed chamber for validation. From the results, this method was considered as a reliable tool to predict canopy photosynthesis using light interception, and can be extended to analyze the canopy photosynthesis in actual greenhouse conditions.

The objective of this research was to assess morphogenetic and structural characteristics of tillers of guinea grass cv. Tanzania at different ages. The pastures of guinea grass were managed in six pasture conditions related to the combination of three frequencies (90, 95, and 99% light interception) and two post-grazing heights (25 and 50 cm). In these six pastures conditions, three tiller ages were evaluated (young, mature, and old). The design was of completely randomized block with three replications. Young tillers exhibited higher leaf appearance rate and leaf elongation rate and, consequently, higher final leaf length and number of live leaves than mature and old tillers, regardless of the pasture condition. On pastures managed with 90 or 95% light interception associated with a post-grazing height of 25 cm, old tillers presented longer leaf lifespan than young and mature ones. There is a progressive reduction in the vigor of growth of pastures of guinea grass cv. Tanzania with advancing tiller age.

The objective of this study was to assess the accumulation and morphological composition of forage in Aruana Guineagrass (Panicum maximum cv. Aruana) swards subjected to intermittent stocking with sheep. Experimental treatments when grazing was introduced included low (95%) and high (98%) incident light interception and low (10 cm)- and high (15 cm)-residue height and were allocated to experimental units (196 m² fenced areas) in a completely randomized 2 × 2 factorial arrangement with three replicates. Treatments were imposed between January and May 2009. More frequent grazing cycles (95% light interception) resulted in better control of stem elongation, lower proportion of dead plant material and invasive plants, and higher proportions of leaf blades in the grazing strata, compared with less frequent grazing cycles (98% light interception). Grass managed with 95% light interception combined with 10 and 15 cm post-grazing height and grass managed at 98% light interception combined with 15 cm post-grazing height did not show differences in forage accumulation rate. These results indicate that more frequent (30 cm pre-grazing height) and less severe (15 cm post-grazing height) grazing cycles provided animals with high leaf blade mass and low stem mass forage.

We have studied the effect of nitrogen supply on growth as well as relation on adaptation to light interception of leek (Allium porrum L.,) hybrid Alita, genotype of known genetic BACKGROUND: . During the vegetative and generative plant growth phases, besides genetic potential many factors affect their productivity. The aim was to investigate genome expression dependent on nitrogen nutrition and light interception. Nitrogen in correlation with light availability has important effect on the growth of plants and the formation of leaf area, what it is necessary for yield of dry matter. Investigation has been done in open field grown leek commercial hybrid Alita (Allium porrum L.,) to consider the way of its genotype response to correlation of light interception and nitrogen nutrition. Investigated traits are leek crop productivity, light interception and chemical analyses of plants. Leek crop productivity was determined through the dry matter production, leaf area development and light interception. Analyses of leek plants comprehended chemical determination and calculation of total nitrogen concentration, nitrogen critical concentration in dry matter, nitrogen demand and, nitrogen uptake in leek crop. Correlation among investigated parameters was assigned to comprehensive hypothetical model of growth and productivity of leek crop grown at open field.It was shown that for nitrogen uptake (Nu), nitrogen demand (ND) and total nitrogen concentration (Nt) parameters variants of mineral nutrition plays significant role (pNu=0.002; pND=0.045; pNt=0.011). Obtained results indicated that correlation of nitrogen and light interception could be used as criteria in plant breeding. Dobijeni rezultati u ispitivanjima hibrida praziluka na genotipsko ispoljavanje prinosa, pomoću utvrđivanja intercepcije svetlosti lisnog pokrivača praziluka gajenog na otvorenom polju u uslovima dodatne mineralne ishrane azotom. Pokazano je da uticaj varijante đubrenja nije značajno statistički povezano sa produktivnošću useva, ali srednje odstupanje pokazuje da je za ostale ispitivane parametre varijanta 125 +125 efikasnija od varijante 250+0 prilikom berbe 91. dana od dana rasađivanja. U navedenim ispitivanjima posebna pažnja je posvećena ulozi genotipa i dinamici parametara azota u suvoj materiji useva praziluka kroz intercepciju svetlosti, koja može da pruži informacije o optimalnoj ishrani azotom u različitim fazama rastenja i razvića biljaka praziluka tokom vegetacionog perioda.

Esta pesquisa foi conduzida com o objetivo de avaliar as características estruturais e o acúmulo de forragem do capim-tanzânia (Panicum maximum cv. Tanzânia) sob pastejo rotativo e submetido às combinações de duas frequências de pastejo (tempo para o dossel atingir 90 ou 95% de interceptação da luz - IL) e duas alturas pós-pastejo (30 ou 50 cm). Adotou-se um arranjo fatorial 2 × 2 em delineamento de blocos completos casualizados com três repetições. As alturas pré-pastejo foram estáveis durante o período experimental (7/11/2005 a 12/10/2006) e corresponderam a 65 e 75 cm para metas de 90 e 95% de IL, respectivamente. Os pastos manejados com altura pós-pastejo de 50 cm e com 90% de IL apresentaram maior número de ciclos de pastejo em comparação àqueles submetidos à altura pós-pastejo de 30 cm e com 95% de IL. Padrão de resposta contrário ocorreu para o intervalo de pastejo. O acúmulo de lâmina foliar (LF) foi maior no verão, intermediário no final da primavera e menor no outono e no inverno e início da primavera. O acúmulo de FT e de LF foi maior nos pastos manejados com 30 cm de altura pós-pastejo em comparação àqueles com 50 cm. Por outro lado, os efeitos da condição pré-pastejo no acúmulo de FT dependeu do resíduo usado. Os níveis de IL (90 ou 95%) não influenciaram o acúmulo de lâminas foliares. As combinações de intensidades e frequências de pastejo resultaram em pouca variação na composição morfológica da forragem, exceto no outono, quando se observou maior percentual de material morto em pastos manejados com 50 cm de altura pós-pastejo em comparação àqueles sob 30 cm de resíduo. O pastejo rotativo do capim-tanzânia deve ser iniciado com 95% de IL pelo dossel e encerrado com 30 cm de altura pós-pastejo. Quando necessário, e para gerar flexibilidade no manejo do pastejo, o capim-tanzânia pode ser pastejado com 90% de IL pelo dossel. The aim of this study was to evaluate the structural characteristics and herbage accumulation of tanzania guineagrass (Panicum maximum cv. Tanzania) under rotational grazing and subjected to combinations of two grazing frequencies (time for the canopy to intercept 90 or 95% of the incident light) and two post-grazing heights (30 or 50 cm). Treatments were assigned to experimental units according to a 2 × 2 factorial arrangement in a completely randomized design, with three replications. Sward heights at pre-grazing were consistent during the experimental period and were of around 65 and 75 cm, for 90% and 95% of light interception (LI), respectively. Pastures managed with post-grazing height of 50 cm and 90% of LI had higher number of grazing cycles when compared with those submitted to post-grazing height of 30 cm and 95% of LI. Herbage mass production was higher in summer, intermediate in late spring and lowest in fall and winter and early spring. Herbage mass and lamina leaves production were higher in pastures managed with post-grazing height of 30 cm when compared with post-grazing height of 50 cm. Nevertheless, the effects of frequency on herbage mass production were associated with the post-grazing height used. The LI levels (90 or 95%) did not affect leaf lamina production. The combinations of frequency and severity of grazing resulted in little variation in the morphological composition of forage, except in the autumn, when there was a higher percentage of dead material in pastures managed with post-grazing height of 50 cm when compared with those with post-grazing height of 30 cm. The rotational grazing of tanzania guineagrass should be initiated when canopy intercepts 95% of incident light until a post-grazing height of 30 cm. When necessary and in order to generate flexibility in grazing management, the tanzania guineagrass can be grazed with 90% of light interception.

The aim of this study was to evaluate during the dry and rainy seasons the morphogenesis traits of two clones of dwarf elephant grass under different management strategies. The study was conducted in a factorial 2 × 2 × 3 design, using two clones, one green and one purple, two residual heights, 25 and 45 cm, and three frequencies of defoliation according to the light interception of 90, 95 and 100%. The design was a randomized block with three replications. The variables were leaf elongation and leaf senescence rate, stem elongation rate and phyllochron. The leaf lifespan and the number of living leaves per tiller were also estimated. The clones presented low stem elongation rates, showing adaptation for grazing use. In the rainy season, the light interception of 100% promoted the highest stem elongation rate and increased the leaf senescence rate. In the dry season, the leaf elongation rate (LER) was higher for the purple clone than for the green one (23 vs 15 mm.tiller-1.day-1). In the rainy season, the LER of the green clone exceeded that of the purple one by 71% (149 vs. 87 mm.tiller-1.day-1). The phyllochron varied among clones only in the rainy season, when the value was 4.6 days.leaf-1 for the green clone and 8.4 days.leaf-1 for the purple one; both of these values are below the mean value observed during the drought (21,6 days.leaf-1). The residual heights did not affect, in an isolated way, any of the variables. The clones are well adapted to grazing, presenting low stem elongation rates. The interval between defoliations should consider the scope of light interception between 90 and 95%. The green clone, with a greater flow of biomass, requires handling with shorter defoliation intervals.

Contact: Office.PP@wur.nl; International audience; Crop simulation models are widely applied at large scale for climate change impact assessment or integrated assessment studies. However, often a mismatch exists between data availability and the level of detail in the model used. Good modelling practice dictates to keep models as simple as possible, but enough detail should be incorporated to capture the major processes that determine the system's behaviour. The objective of this study was to investigate the effect of the level of detail incorporated in process-based crop growth models on simulated potential yields under a wide range of climatic conditions. We conducted a multi-site analysis and identified that by using a constant radiation use efficiency (RUE) value under a wide range of climatic conditions, the description of the process of biomass production may be over-simplified, as the effects of high temperatures and high radiation intensities on this parameter are ignored. Further, we found that particular attention should be given to the choice of the light interception approach in a crop model as determined by leaf area index (LA!) dynamics. The two LAI dynamics approaches considered in this study gave different simulated yields irrespective of the characteristics of the location and the light interception approaches better explained the differences in yield sensitivity to climatic variability than the biomass production approaches. Further analysis showed that differences between the two IAI dynamics approaches for simulated yields were mainly due to different representations of leaf senescence in both approaches. We concluded that a better understanding and modelling of leaf senescence, particularly its onset, is needed to reduce model uncertainty in yield simulations.

Este trabalho foi conduzido com o objetivo de avaliar as características estruturais da Brachiaria decumbens cv. Basilisk. Foram avaliadas quatro alturas de plantas (10, 20, 30 e 40 cm) dentro de uma mesma pastagem, em um delineamento experimental de blocos casualizados com duas repetições. A variação na altura inicial das plantas no pasto de capim-braquiária apresentou resposta linear e negativa. As massas de lâmina foliar verde, colmo verde, material morto, forragem verde e forragem total aumentaram linearmente com a altura das plantas no pasto. Contrariamente, houve redução linear na relação lâminas foliares verdes/colmos verdes com a altura das plantas no pasto (de 1,16 para 0,58). A altura das plantas no pasto teve efeito mais pronunciado sobre o aumento das massas de colmo verde e material morto que sobre a massa de lâmina foliar verde. A densidade volumétrica de lâminas foliares verdes decresceu (de 97,09 para 39,07 kg/cm.ha de MS) com a altura das plantas no pasto. Mesma resposta ocorreu para as densidades volumétricas de forragem verde (de 181,62 para 107,85 kg/cm.ha de MS) e forragem total (de 283,39 para 195,72 kg/cm.ha de MS). Por outro lado, não houve efeito da altura das plantas no pasto sobre as densidades volumétricas de colmos verdes e material morto, que apresentaram valores médios de 80,95 e 95,61 kg/cm.ha de MS, respectivamente. A altura das plantas no pasto teve efeito quadrático sobre a interceptação de luz pelo dossel. Áreas da pastagem com alturas de 10, 20, 30 e 40 cm apresentaram valores de interceptação luminosa de 56,15; 85,16; 93,39 e 96,57%, respectivamente. Ocorre variação espacial e temporal na estrutura do pasto de B. decumbens manejado sob lotação contínua. This study was carried out aiming to evaluate the structural characteristics of Brachiaria decumbens cv. Basilisk pasture. Four heights of plants (10, 20, 30 and 40 cm) were evaluated within the same grazing area in a randomized block experimental design with two repetitions. Variation in the initial height of the signal grass pasture plant showed a linear and a negative response. The masses of green leaf blade mass, live stem, dead material, live forage and total forage linearly increased with heights of the plants on the pasture. However, it was observed a linear reduction in green leaf blade/live stem ratio and the height of the plants on the pasture (from 1.16 to 0.58). Plant height on the pasture had a stronger effect on the increase of live stem and the dead material masses than it had on the green leaf blade mass. Volumetric density of green leaf blade decreased (from 97.09 to 39.07 kg/cm ha DM) with plant height on the pasture. The same response was found for volumetric densities of live forage (from 181.62 to 107.85 kg/cm.ha dry matter) and total forage (from 283.39 to 195.72 kg/cm.ha dry matter). On the other hand, the plant heights on pasture did not affect volumetric density of live stem and dead material, which showed mean values 80.95 and 95.61 kg/cm.ha DM, respectively. The heights of the plants on pasture had a quadratic effect on light interception by the canopy. Grazing areas with heights of 10, 20, 30 and 40 cm showed light interception values of 56.15, 85.16, 93.39 and 96.57%, respectively. It occurs and temporal variabilities on the B. decumbens pasture structure managed under continuous stocking.

Photosynthesis is an important physiological response for determination of CO2 fertilization in greenhouses and estimation of crop growth. In order to estimate the whole plant photosynthetic rate, it is necessary to investigate how light interception by crops changes with environmental and morphological factors. The objectives of this study were to analyze plant light interception using a three-dimensional (3D) plant model and ray-tracing, determine the spatial distribution of the photosynthetic rate, and estimate the whole plant photosynthetic rate of Irwin mango (Mangifera indica L. cv. Irwin) grown in greenhouses. In the case of mangoes, it is difficult to measure actual light interception at the canopy level due to their vase shape. A two-year-old Irwin mango tree was used to measure the whole plant photosynthetic rate. Light interception and whole plant photosynthetic rate were measured under artificial and natural light conditions using a closed chamber (1 × 1 × 2 m). A 3D plant model was constructed and ray-tracing simulation was conducted for calculating the photosynthetic rate with a two-variable leaf photosynthetic rate model of the plant. Under artificial light, the estimated photosynthetic rate increased from 2.0 to 2.9 μmolCO2·m−2·s−1 with increasing CO2 concentration. On the other hand, under natural light, the photosynthetic rate increased from 0.2 μmolCO2·m−2·s−1 at 06:00 to a maximum of 7.3 μmolCO2·m−2·s−1 at 09:00, then gradually decreased to −1.0 μmolCO2·m−2·s−1 at 18:00. In validation, simulation results showed good agreement with measured results with R2 = 0.79 and RMSE = 0.263. The results suggest that this method could accurately estimate the whole plant photosynthetic rate and be useful for pruning and adequate CO2 fertilization.

† Background and Aims In grapevine, canopy-structure-related variations in light interception and distribution affect productivity, yield and the quality of the harvested product. A simple statistical model for reconstructing three- dimensional (3D) canopy structures for various cultivar - training system (CT) pairs has been implemented with special attention paid to balance the time required for model parameterization and accuracy of the represen- tations from organ to stand scales. Such an approach particularly aims at overcoming the weak integration of inter- plant variability using the usual direct 3D measurement methods. † Model This model is original in combining a turbid-medium-like envelope enclosing the volume occupied by vine shoots with the use of discrete geometric polygons representing leaves randomly located within this volume to rep- resent plant structure. Reconstruction rules were adapted to capture the main determinants of grapevine shoot archi- tecture and their variability. Using a simplified set of parameters, it was possible to describe (1) the 3D path of the main shoot, (2) the volume occupied by the foliage around this path and (3) the orientation of individual leaf sur- faces. Model parameterization (estimation of the probability distribution for each parameter) was carried out for eight contrasting CT pairs. † Key Results and Conclusions The parameter values obtained in each situation were consistent with our knowledge of grapevine architecture. Quantitative assessments for the generated virtual scenes were carried out at the canopy and plant scales. Light interception efficiency and local variations of light transmittance within and between exper- imental plots were correctly simulated for all canopies studied. The approach predicted these key ecophysiological variables significantly more accurately than the classical complete digitization method with a limited number of plants. In addition, this model accurately reproduced the characteristics of a wide range of individual digitized plants. Simulated leaf area density and the distribution of light interception among leaves were consistent with measurements. However, at the level of individual organs, the model tended to underestimate light interception.

O objetivo deste trabalho foi avaliar as características estruturais e a produção de forragem do capim-tanzânia (Panicum maximum Jacq. cv. Tanzânia) sob condições de pastejo rotativo, em um Latossolo Vermelho distrófico, num experimento realizado em Campo Grande, MS. Os tratamentos corresponderam a combinações entre três condições de pré e duas condições de pós-pastejo, e foram alocados às unidades experimentais segundo um delineamento de blocos completos casualizados, com três repetições e arranjo fatorial 3x2. As condições de pré-pastejo de 90, 95 e 100% de interceptação de luz (IL) foram atingidas consistentemente com alturas de dossel em torno de 60, 70 e 85 cm, respectivamente. Pastejos iniciados com 90% de IL resultaram em maior número de ciclos de pastejo em relação aos iniciados com 95 e 100% de IL. O acúmulo de forragem foi maior em pastejos realizados com 95% do que com 90 ou 100% de IL, mas não houve diferença entre os tratamentos de 90 e 95% de IL para acúmulo de folhas. O acúmulo de colmos aumentou após os 95% de IL, indicando a importância da freqüência de pastejo como maneira de controlar a estrutura e a composição do dossel. The objective of this work was to evaluate the structural characteristics and herbage accumulation of Tanzania grass pastures (Panicum maximum cv. Tanzania) under rotationally grazing, in an Oxisol, in experiment carried out at Campo Grande, MS. Treatments corresponded to combinations of three pre and two post-grazing conditions, and were allocated to experimental units according to a complete randomized block design, with three replications and a 3x2 factorial arrangement. The pre-grazing conditions of 90, 95 and 100% light interception (LI) were achieved consistently with swards heights around 60, 70 and 85 cm, respectively. Grazings at 90% LI resulted in larger number of grazing cycles than grazings at 95 and 100% LI. Total herbage accumulation was larger with grazings at 95% than at 90 and 100% LI, but there was no difference between the 90 and 95% LI treatments for leaf accumulation. Accumulation of stem material increased substantially after 95% LI, indicating the importance of grazing frequency as a means of controlling sward structure and composition.

O objetivo deste trabalho foi avaliar o desempenho agronômico do capim-xaraés [Brachiaria brizantha (A. Rich.) Stapf. cv. Xaraés] em resposta a três estratégias de pastejo rotacionado: uma baseada no calendário (pastejo a cada 28 dias) e duas em função da interceptação luminosa (IL) pelo dossel (pastejo iniciado a 95% ou 100% de IL). No tratamento 95% de IL, a altura média pré-pastejo foi 29,5 cm; no 100% de IL, foi 41,6 cm e no 28 dias, 34,2 cm. A altura média pós-pastejo foi 14,6 cm em todos os tratamentos, e correspondeu a um índice de área foliar médio de 0,73, IL de 42% e ângulo da folhagem de 65,2º. No pré-pastejo, o ângulo da folhagem não variou com as estratégias de pastejo e correspondeu a um valor médio de 41,6º. A altura do dossel e a IL correspondente ao longo da rebrotação estiveram correlacionadas em todos os tratamentos. O tratamento 100% de IL resultou em maior intervalo entre pastejos e maior acúmulo de forragem em relação aos tratamentos 95% de IL e 28 dias de descanso, porém essa maior produção foi alcançada por meio de maiores quantidades acumuladas de colmos e de material morto. The objective of this work was to evaluate the agronomic performance of Xaraés palisadegrass [Brachiaria brizantha (A. Rich.) Stapf cv. Xaraés] in response to rotational grazing managements defined by either pre-graze canopy light interception (LI) or calendar days. Mean pre-graze sward height was 29.5 cm for the 95% LI pastures, 41.6 cm for 100% LI, and 34.2 cm for the 28-day schedule. Mean post-graze sward height was 14.6 cm across treatments, which corresponded to a mean 0.73 leaf area index, 42% LI and 65.2º foliage angle. At pre-graze, foliage angles were not affected by grazing management (mean = 41.6º). Sward height and LI were highly correlated across treatments. Grazing at 100% LI resulted in longer intervals between grazings and higher herbage accumulation than the other two treatments, although this higher accumulation corresponded mainly to large amounts of stem and dead material.