Search

Elevated expression of CD47 in some cancers is associated with poor survival related to its function as an innate immune checkpoint when expressed on tumor cells. In contrast, elevated CD47 expression in cutaneous melanomas is associated with improved survival. Previous studies implicated protective functions of CD47 expressed by immune cells in the melanoma tumor microenvironment. RNA sequencing analysis of responses induced by CD3 and CD28 engagement on wild type and CD47-deficient Jurkat T lymphoblast cells identified additional regulators of T cell function that were also CD47-dependent in mouse CD8 T cells. MYCN mRNA expression was upregulated in CD47-deficient cells but downregulated in CD47-deficient cells following activation. CD47 also regulated alternative splicing that produces two N-MYC isoforms. The CD47 ligand thrombospondin-1 inhibited expression of these MYCN mRNA isoforms, as well as induction of the oncogenic decoy MYCN opposite strand (MYCNOS) RNA during T cell activation. Analysis of mRNA expression data for melanomas in The Cancer Genome Atlas identified a significant coexpression of MYCN with CD47 and known regulators of CD8 T cell function. Thrombospondin-1 inhibited the induction of TIGIT, CD40LG, and MCL1 mRNAs following T cell activation in vitro. Increased mRNA expression of these T cell transcripts and MYCN in melanomas was associated with improved overall survival.

A tandem cell for artificial photosynthesis with CO2 and water as the oxidants and an organic alcohol as the reductant is described. The use of molecular catalysts with high activity and selectivity, in an appropriate cell configuration, leads to electrochemical reduction of CO2 and water to CO and H2 (syngas) in tandem with benzyl alcohol oxidation to benzaldehyde. A faradaic efficiency (FE) of ∼70% for the formation of benzaldehyde was obtained with simultaneous syngas generation with varying ratios of H2 and CO at the cathode. The maximum energy efficiency obtained for the electrochemical cell was 17.6%.

Significance Electrochemical reduction of CO 2 can convert CO 2 emission back to value-added fuels and chemicals and store renewable electricity. Reducing CO 2 to multicarbon products has attracted great interest because of their higher energy densities and associated economic values. We report here a promising strategy for steering CO 2 electroreduction toward ethanol production by exploiting a surface-bound Ru polypyridyl carbene catalyst on an N-doped porous carbon electrode. We show the synergistic effects of Ru polypyridyl carbene for CO intermediate production with a porous carbon for C–C coupling that could boost ethanol production at relatively low overpotentials. The strategy provides insights on how to improve selectivity and efficiency for CO 2 reduction toward multicarbon products.

Organic chromophores can be synthesized by established methods and offer an opportunity to expand overall solar spectrum utilization for dye-sensitized photoelectrosynthesis cells. However, there are complications in the use of organic chromophores arising from the instability of their oxidized forms, the inability of their oxidized forms to activate a water oxidation catalyst, or the absence of a sufficiently reducing excited state for electron injection into appropriate semiconductors. Three new triarylamine donor–acceptor organic dyes have been investigated here for visible-light-driven water oxidation. They offer highly oxidizing potentials (>1 V vs NHE in aqueous solution) that are sufficient to drive a water oxidation catalyst and excited-state potentials (∼−1.2 V vs NHE) sufficient to inject into TiO2. The oxidized form of one of the chromophores is sufficiently stable to exhibit reversible electrochemistry in aqueous solution. The chromophores also have favorable photophysics. Visible-light-driven...

Visible-light-driven water splitting was investigated in a dye sensitized photoelectrosynthesis cell (DSPEC) based on a photoanode with a phosphonic acid-derivatized donor−π–acceptor (D−π–A) organic chromophore, 1, and the water oxidation catalyst [Ru(bda)(4-O(CH2)3P(O3H2)2-pyr)2], 2, (pyr = pyridine; bda = 2,2′-bipyridine-6,6′-dicarboxylate). The photoanode was prepared by using a layering strategy beginning with the organic dye anchored to an FTO|core/shell electrode, atomic layer deposition (ALD) of a thin layer (

In this paper, graphene oxides graft poly citric acid was synthesized. In first step grahene oxide was prepared. In oxidation process Mildly oxidation technique and a modified Hummer's method which used a lower concentration of oxidizing agent were used to prepare the graphene oxide. Two types of graphene oxides were investigated including Hummer's Graphene Oxide (HGO) and Mildly Graphene Oxide (MGO). Subsequent the surface of graphene oxides were modified by grafting (poly citric acid (PCA)) by using radical polymerization. Polymerized graphene oxides (HGO-graft-PCA and MGO-graft-PCA) were prepared and characterized by using various microscopic and spectroscopic analyses including FTIR, SEM, TEM, UV–Visible, and XPS. The results were consistent with PCA being grafted onto the surface of the graphene oxide. Our results show that polymerization of MGO is better than HGO with the polymerized MGO better able to dissolve in organic and aqueous solvents. Finally, the MGO and MGO-g-PCA were used as nanoelectrocatalysts and coated on electrode surfaces successfully.

The issue of localization/delocalization of electron spin density in Metal-to-Ligand Charge Transfer (MLCT) excited states of [Ru(bpy) 3 ] 2+ (bpy = 2,2′-bipyridine) has been debated for almost four decades. Localization/delocalization of MLCT excited states specifically addresses the question regarding electron configuration in the excited state and whether the excited electron in the dπ 5 π ∗1 excited state was localized on one ligand, [Ru III (bpy)(bpy − )] 2+∗ , or delocalized over all three, [Ru III (bpy − 1/3 ) 3 ] 2+∗ . This contribution outlines the results of a detailed meta-analysis of available experimental data to delineate the factors that govern how the excited state electron density evolves over the time from excitation until final excited state equilibration. Given the nature of the analysis, a number of interwoven issues are discussed in this article. A cohesive evaluation of the existing data leads to a detailed mechanistic understanding of the events that accrue following excitation of [Ru(bpy) 3 ] 2+ . The results of the meta-analysis are both remarkably systematic and consistent with existing theories of dynamic processes.

Creating stable surface-bound molecular catalysts for CO2 reduction in aqueous solutions for either electrochemical or photoelectrochemical reduction is a continuing challenge. We report here the preparation and characterization of thin oxide/carbon nanotube electrodes on fluorine-doped tin oxide (FTO) electrodes. The electrodes were prepared by atomic layer deposition (ALD) of ∼15 nm of TiO2 followed by a layer of carbon nanotubes and a thin (2 nm) overlayer of TiO2 for surface stabilization and binding. The phosphonate-derivatized version of the known aqueous solution catalyst for H2/CO reduction, [RuII(tpy-Ph–CH2–PO3H2)(Mebim-py)(H2O)](PF6)2 (tpy-Ph–CH2–PO3H2 = (4-([2, 2′:6′,2″-terpyridin]-4′-yl)benzyl)phosphonic acid; Mebim-py = 3-methyl-1-pyridyl-benzimidazol-2-ylidene), was added to the surface and stabilized by addition of a thin overlayer of TiO2 by ALD. In the derivatized electrodes, the catalyst maintains its reactivity toward CO2 reduction in the short-term, giving mixtures of H2/CO that vary f...

Tandem junction photoelectrochemical water-splitting devices, whereby two light absorbing electrodes targeting separate portions of the solar spectrum generate the voltage required to convert water to oxygen and hydrogen, enable much higher possible efficiencies than single absorber systems. We report here on the development of a tandem system consisting of a dye-sensitized photoelectrochemical cell (DSPEC) wired in series with a dye-sensitized solar cell (DSC). The DSPEC photoanode incorporates a tris(bipyridine)ruthenium(II)-type chromophore and molecular ruthenium based water oxidation catalyst. The DSPEC was tested with two more-red absorbing DSC variations, one utilizing N719 dye with an I3–/I– redox mediator solution and the other D35 dye with a tris(bipyridine)cobalt ([Co(bpy)3]3+/2+) based mediator. The tandem configuration consisting of the DSPEC and D35/[Co(bpy)3]3+/2+ based DSC gave the best overall performance and demonstrated the production of H2 from H2O with the only energy input from simul...

The redox properties of a surface-bound phosphate flavin derivative (flavin mononucleotide, FMN) have been investigated on planar-FTO and nanoITO electrodes under acidic conditions in 1:1 CH3CN/H2O (V:V). On FTO, reversible 2e-/2H+ reduction of FTO|-FMN to FTO|-FMNH2 occurs with the pH and scan rate dependence expected for a 2e-/2H+ surface-bound couple. Addition of tetramethylbenzoquinone (Me4Q) results in rapid electrocatalyzed reduction to the hydroquinone by a pathway first order in quinone and first order in acid with kH = (2.6 ± 0.2) × 106 M–1 s–1. Electrocatalytic reduction of the quinone also occurs on derivatized, high surface area nanoITO electrodes with evidence for competitive rate-limiting diffusion of the quinone into the mesoporous nanostructure.

Layer-by-Layer (LbL) polyelectrolyte self-assembly occurs by the alternate exposure of a substrate to solutions of oppositely charged polyelectrolytes or polyions. Here, we report the application of LbL to construct chromophore–catalyst assemblies consisting of a cationic polystyrene-based Ru polychromophore (PS-Ru) and a [Ru(tpy)(2-pyridyl-N-methylbenzimidazole) (OH2)]2+ water oxidation catalyst (RuC), codeposited with poly(acrylic acid) (PAA) as an inert polyanion. These assemblies are deposited onto planar indium tin oxide (ITO, Sn:In2O3) substrates for electrochemical characterization and onto mesoporous substrates consisting of a SnO2/TiO2 core/shell structure atop fluorine doped tin oxide (FTO) for application to light-driven water oxidation in a dye-sensitized photoelectrosynthesis cell. Cyclic voltammetry and ultraviolet–visible absorption spectroscopy reveal that multilayer deposition progressively increases the film thickness on ITO glass substrates. Under an applied bias, photocurrent measureme...

Simply mixing a Cu(II) salt and 1,2-ethylenediamine (en) affords precursors for both heterogeneous or homogeneous water oxidation catalysis, depending on pH. In phosphate buffer at pH 12, the Cu(II) en complex formed in solution is decomposed to give a phosphate-incorporated CuO/Cu(OH)2 film on oxide electrodes that catalyzes water oxidation. A current density of 1 mA/cm2 was obtained at an overpotential of 540 mV, a significant enhancement compared to other Cu-based surface catalysts. The results of electrolysis studies suggest that the solution en complex decomposes by en oxidation to glyoxal, following Cu(II) oxidation to Cu(III). At pH 8, the catalysis shifts from heterogeneous to homogeneous with a single-site mechanism for Cu(II)/en complexes in solution. A further decrease in pH to 7 leads to electrode passivation via the formation of a Cu(II) phosphate film during electrolyses. As the pH is decreased, en, with pKb ≈ 6.7, becomes less coordinating and the precipitation of the Cu(II) film inhibits w...

The nitrogen cycle is an important biogeochemical cycle in which nitrogen, a building block of proteins and nucleic acids, is chemically activated. In the cycle, atmospheric dinitrogen is converted into ammonia as our primary source of bioavailable nitrogen. Ammonia is a carbon-free energy carrier and widely used as a chemical feedstock. Ammonia oxidation is also a critical step in global nitrogen cycling. Harnessing the energy stored in ammonia involves oxidization to dinitrogen and hydrogen, NH3 → 1/2N2 + 3/2H2, with the hydrogen produced utilized in hydrogen-based fuel cells (Fig. 1). Ammonia can be also easily liquefied. As a hydrogen carrier, it provides a strategy for the efficient storage, transport, and utilization of renewable hydrogen on large scales, and it is not surprising that ammonia oxidation has attracted great interest in clean energy and environmental pollution control. Electrochemical oxidation of ammonia occurs at room temperature under ambient pressures (1, 2) with an interest in active electrocatalysts with low overpotentials and high faradaic efficiencies for its oxidization to hydrogen to dinitrogen. Fig. 1. Simplified reaction scheme illustrating an ammonia/N2 fuel cycle in which NH3 is electrochemically oxidized to N2 and H2, NH3 →1/2N2 + 3/2H2, with H2 utilized in a hydrogen/O2 fuel cell. In a reverse cycle, N2 is electrochemically reduced to NH3 by nitrogen fixation (1/2N2 +3/2H2O → NH3 + 3/4O2). In a complete ammonia fuel cycle, both electrochemical ammonia oxidation and nitrogen fixation would be driven by renewable energy sources. A study in PNAS by Habibzadeh et al. (3) reports that ruthenium polypyridyl complexes can be used as electrocatalysts for the oxidation of ammonia to dinitrogen and dihydrogen at … [↵][1]1To whom correspondence should be addressed. Email: tjmeyer{at}unc.edu. [1]: #xref-corresp-1-1

Described herein is a photochemical approach to the generation of a high-valent metal-oxo species that utilizes a chromophore or “sensitizer”, a semiconducting electron acceptor, and a redox buffer that poises a catalyst’s initial protonation and oxidation state. The photoexcited sensitizer injects an electron into the semiconductor and then oxidizes the catalyst whose reactivity occurs in kinetic competition with back electron transfer. Core–shell SnO2/TiO2 semiconductor nanocrystallites inhibited charge recombination relative to TiO2 acceptors. With low sensitizer-catalyst surface coverages, a novel trapping process is exploited that enables catalysis reactivity to be quantified on time scales ranging from nanoseconds to minutes. A proof-of-principle example provides the demonstration of a light-initiated, (1e–, 2H+)-transfer reaction, with an inverse isotope effect of kH/kD = 0.63, to generate a Ru(IV) oxo species.

High fives and sixes for Americium ions You've probably heard of uranium and plutonium. Americium (Am) is less widely discussed outside chemistry circles, but the separation of this heavier radioactive element from nuclear waste streams is a major goal of fuel reprocessing research. The trouble is that trivalent Am ions are hard to tease apart from similarly charged lanthanide ions. Dares et al. now show that terpyridyl ligands appended to an electrode can promote the oxidation of trivalent Am ions to the pentavalent and hexavalent states (see the Perspective by Soderquist). These more highly charged ions should be easier to isolate for the subsequent use of the Am in next-generation nuclear reactors. Science , this issue p. 652 ; see also p. 635

Preparation of Ru(II) polypyridyl–iridium oxide nanoparticle (IrOX NP) chromophore–catalyst assemblies on an FTO|nanoITO|TiO2 core/shell by a layer-by-layer procedure is described for application in dye-sensitized photoelectrosynthesis cells (DSPEC). Significantly enhanced, bias-dependent photocurrents with Lumencor 455 nm 14.5 mW/cm2 irradiation are observed for core/shell structures compared to TiO2 after derivatization with [Ru(4,4′-PO3H2bpy)2(bpy)]2+ (RuP2) and uncapped IrOX NPs at pH 5.8 in NaSiF6 buffer with a Pt cathode. Photocurrents arising from photolysis of the resulting photoanodes, FTO|nanoITO|TiO2|−RuP2,IrO2, are dependent on TiO2 shell thickness and applied bias, reaching 0.2 mA/cm2 at 0.5 V vs AgCl/Ag with a shell thickness of 6.6 nm. Long-term photolysis in the NaSiF6 buffer results in a marked decrease in photocurrent over time due to surface hydrolysis and loss of the chromophore from the surface. Long-term stability, with sustained photocurrents, has been obtained by atomic layer depos...

The mechanism of electrocatalytic water oxidation by the water oxidation catalyst, ruthenium 2,2′-bipyridine-6,6′-dicarboxylate (bda) bis-isoquinoline (isoq), [Ru(bda)(isoq)2], 1, at metal oxide electrodes has been investigated. At indium-doped tin oxide (ITO), diminished catalytic currents and increased overpotentials are observed compared to glassy carbon (GC). At pH 7.2 in 0.5 M NaClO4, catalytic activity is enhanced by the addition of [Ru(bpy)3]2+ (bpy = bipyridine) as a redox mediator. Enhanced catalytic rates are also observed at ITO electrodes derivatized with the surface-bound phosphonic acid derivative [Ru(4,4′-(PO3H2)2bpy)(bpy)2]2+, RuP2+. Controlled potential electrolysis with measurement of O2 at ITO with and without surface-bound RuP2+ confirm that water oxidation catalysis occurs. Remarkable rate enhancements are observed with added acetate and phosphate, consistent with an important mechanistic role for atom-proton transfer (APT) in the rate-limiting step as described previously at GC elect...

A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO2/TiO2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore-catalyst assembly. The assembly, [(4,4'-(PO3H2)2bpy)2Ru(4-Mebpy-4'-bimpy)Ru(tpy)(OH2)](4+) ([Ru(a) (II)-Ru(b) (II)-OH2](4+), combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al2O3 or TiO2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO2/TiO2|-[Ru(a) (II)-Ru(b) (II)-OH2](4+)(Al2O3 or TiO2) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H2 and O2. The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO2/TiO2 core/shell compared with nanoITO/TiO2 with the same assembly results in photocurrent enhancements of ∼ 5. Systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm(2) with 445-nm, ∼ 90-mW/cm(2) illumination in a phosphate buffer at pH 7.

Chloride oxidation to chlorine is a potential alternative to water oxidation to oxygen as a solar fuels half-reaction. Ag(I) is potentially an oxidative catalyst but is inhibited by the high potentials for accessing the Ag(II/I) and Ag(III/II) couples. We report here that the complex ions AgCl2(-) and AgCl3(2-) form in concentrated Cl(-) solutions, avoiding AgCl precipitation and providing access to the higher oxidation states by delocalizing the oxidative charge over the Cl(-) ligands. Catalysis is homogeneous and occurs at high rates and low overpotentials (10 mV at the onset) with μM Ag(I). Catalysis is enhanced in D2O as solvent, with a significant H2O/D2O inverse kinetic isotope effect of 0.25. The results of computational studies suggest that Cl(-) oxidation occurs by 1e(-) oxidation of AgCl3(2-) to AgCl3(-) at a decreased potential, followed by Cl(-) coordination, presumably to form AgCl4(2-) as an intermediate. Adding a second Cl(-) results in "redox potential leveling", with further oxidation to {AgCl2(Cl2)}(-) followed by Cl2 release.

Copper metal is in theory a viable oxidative electrocatalyst based on surface oxidation to Cu(III) and/or Cu(IV) , but its use in water oxidation has been impeded by anodic corrosion. The in situ formation of an efficient interfacial oxygen-evolving Cu catalyst from Cu(II) in concentrated carbonate solutions is presented. The catalyst necessitates use of dissolved Cu(II) and accesses the higher oxidation states prior to decompostion to form an active surface film, which is limited by solution conditions. This observation and restriction led to the exploration of ways to use surface-protected Cu metal as a robust electrocatalyst for water oxidation. Formation of a compact film of CuO on Cu surface prevents anodic corrosion and results in sustained catalytic water oxidation. The Cu/CuO surface stabilization was also applied to Cu nanowire films, which are transparent and flexible electrocatalysts for water oxidation and are an attractive alternative to ITO-supported catalysts for photoelectrochemical applications.

A Ru(II) polypyridyl-derivatized polypropylacrylate end-capped with a water-oxidation-catalyst (WOC) has been synthesized by using reversible addition-fragmentation chain transfer polymerization (RAFT) followed by click reaction and end-group functionalization. In cyclic voltammograms in propylene carbonate, chromophore oxidation occurs at 1.27 V vs. NHE and the Ru(III/II) wave for the catalyst at 0.84 V vs. NHE. Upon excitation of the Ru(II) chromophore, excited-state energy migration occurs by site-to-site, -Ru(II)*- → -Ru(II)-, energy transfer hopping along the polymer chain, in part, reaching the terminal catalyst site where -Ru(II)*- → -Ru(II)-OH2(2+) energy transfer is favored by ΔG(en) = -2100 cm(-1). Added MV(2+) as an electron transfer acceptor oxidizes the -Ru(II)*- excited state on the polymer to Ru(III), -Ru(II)*- + MV(2+) → -Ru(III)- + MV(+), and ultimately, the catalyst, by site-to-site electron transfer hopping and oxidation, [Formula: see text]. Oxidation is followed by relatively slow, diffusional back electron transfer from MV˙(+) to Ru(III) sites on the polymer chain. The mixed chromophore-catalyst polymer is a water oxidation catalyst with potential for enhanced light harvesting and water oxidation.

Hydrobromic acid (HBr) has significant potential as an inexpensive feedstock for hydrogen gas (H2) solar fuel production through HBr splitting. Mesoporous thin films of anatase TiO2 or SnO2/TiO2 core–shell nanoparticles were sensitized to visible light with a new RuII polypyridyl complex that served as a photocatalyst for bromide oxidation. These thin films were tested as photoelectrodes in dye-sensitized photoelectrosynthesis cells. In 1 N HBr (aq), the photocatalyst undergoes excited-state electron injection and light-driven Br– oxidation. The injected electrons induce proton reduction at a Pt electrode. Under 100 mW cm−2 white-light illumination, sustained photocurrents of 1.5 mA cm–2 were measured under an applied bias. Faradaic efficiencies of 71 ± 5% for Br– oxidation and 94 ± 2% for H2 production were measured. A 12 μmol h–1 sustained rate of H2 production was maintained during illumination. The results demonstrate a molecular approach to HBr splitting with a visible light absorbing complex capable...

For solar water splitting, dye-sensitized NiO photocathodes have been a primary target. Despite marginal improvement in performance, limitations remain arising from the intrinsic disadvantages of NiO and insufficient catalysis. We report here a new approach to modifying NiO photocathodes with doped NiO bilayers and an additional layer of macro–mesoporous ITO. The trilayered electrode is functionalized with a surface-attached ruthenium polypyridyl dye and a covalently bridged nickel-based hydrogen evolution catalyst. The NiO film, containing a 2% K+-doped NiO inner layer and a 2% Cu2+-doped NiO outer layer, provides sufficient driving force for hole transport following hole injection by the molecular assembly. Upon light irradiation, the resulting photocathode generates hydrogen from water sustainably with enhanced photocurrents and a Faradaic efficiency of ∼90%. This approach highlights the value of modifying both the internal and surface structure of NiO and provides insights into a new generation of dye...

This review summarizes the development of electrochemical CO2 reduction catalysts in the UNC Energy Frontier Research Center for Solar Fuels. Two strategies for converting CO2 to CO or formate have been explored. In one, polypyridyl complexes of Ru(II) have been used to reduce CO2 to CO in acetonitrile and in acetonitrile/water mixtures. In the absence of CO2 water is reduced to H2 by these complexes. With added weak acids in acetonitrile with added water and CO2, reduction to syngas mixtures of CO and H2 is observed. A single polypyridyl complex of Ru(II) has been shown to be both a catalyst for water oxidation and CO2 reduction in an electrochemical cell for CO2 splitting into CO and O2. In parallel, Ir pincer catalysts have been shown to act as selective electrocatalysts for reducing CO2 to formate in acetonitrile with added water and in pure water without competition from electrocatalytic H2 production. Details of the catalytic mechanisms of each have also been investigated.

A single Ru(II) polypyridyl carbene complex catalyzes the electrochemical reduction of CO2 in water with added bicarbonate to give syngas H2+CO mixtures at the cathode and water oxidation to O2 at the anode. The H2/CO ratio in the syngas product can be adjusted between 4 : 1 and 1 : 2 by varying the applied potential and solution pH with overall electrolysis energy efficiencies near 50%.

The complex Cu(II)(Py3P) (1) is an electrocatalyst for water oxidation to dioxygen in H2PO4(-)/HPO4(2-) buffered aqueous solutions. Controlled potential electrolysis experiments with 1 at pH 8.0 at an applied potential of 1.40 V versus the normal hydrogen electrode resulted in the formation of dioxygen (84% Faradaic yield) through multiple catalyst turnovers with minimal catalyst deactivation. The results of an electrochemical kinetics study point to a single-site mechanism for water oxidation catalysis with involvement of phosphate buffer anions either through atom-proton transfer in a rate-limiting O-O bond-forming step with HPO4(2-) as the acceptor base or by concerted electron-proton transfer with electron transfer to the electrode and proton transfer to the HPO4(2-) base.

Light-driven dehydrogenation of benzyl alcohol (BnOH) to benzaldehyde and hydrogen has been shown to occur in a dye-sensitized photoelectrosynthesis cell (DSPEC). In the DSPEC, the photoanode consists of mesoporous films of TiO2 nanoparticles or of core/shell nanoparticles with tin-doped In2O3 nanoparticle (nanoITO) cores and thin layers of TiO2 deposited by atomic layer deposition (nanoITO/TiO2). Metal oxide surfaces were coderivatized with both a ruthenium polypyridyl chromophore in excess and an oxidation catalyst. Chromophore excitation and electron injection were followed by cross-surface electron-transfer activation of the catalyst to -Ru(IV)═O(2+), which then oxidizes benzyl alcohol to benzaldehyde. The injected electrons are transferred to a Pt electrode for H2 production. The nanoITO/TiO2 core/shell structure causes a decrease of up to 2 orders of magnitude in back electron-transfer rate compared to TiO2. At the optimized shell thickness, sustained absorbed photon to current efficiency of 3.7% was achieved for BnOH dehydrogenation, an enhancement of ~10 compared to TiO2.

An iridium pincer dihydride catalyst was immobilized on carbon nanotube-coated gas diffusion electrodes (GDEs) by using a non-covalent binding strategy. The as-prepared GDEs are efficient, selective, durable, gas permeable electrodes for electrocatalytic reduction of CO2 to formate. High turnover numbers (ca. 54,000) and turnover frequencies (ca. 15 s(-1)) were enabled by the novel electrode architecture in aqueous solutions saturated in CO2 with added HCO3(-).

The capture and storage of solar energy requires chromophores that absorb light throughout the solar spectrum. We report here the synthesis, characterization, electrochemical, and photophysical properties of a series of Ru(II) polypyridyl complexes of the type [Ru(bpy)2(N-N)](2+) (bpy = 2,2'-bipyridine; N-N is a bidentate polypyridyl ligand). In this series, the nature of the N-N ligand was altered, either through increased conjugation or incorporation of noncoordinating heteroatoms, as a way to use ligand electronic properties to tune redox potentials, absorption spectra, emission spectra, and excited state energies and lifetimes. Electrochemical measurements show that lowering the π* orbitals on the N-N ligand results in more positive Ru(3+/2+) redox potentials and more positive first ligand-based reduction potentials. The metal-to-ligand charge transfer absorptions of all of the new complexes are mostly red-shifted compared to Ru(bpy)3(2+) (λmax = 449 nm) with the lowest energy MLCT absorption appearing at λmax = 564 nm. Emission energies decrease from λmax = 650 nm to 885 nm across the series. One-mode Franck-Condon analysis of room-temperature emission spectra are used to calculate key excited state properties, including excited state redox potentials. The impacts of ligand changes on visible light absorption, excited state reduction potentials, and Ru(3+/2+) potentials are assessed in the context of preparing low energy light absorbers for application in dye-sensitized photoelectrosynthesis cells.

Nitrogen-doped carbon nanotubes are selective and robust electrocatalysts for CO2 reduction to formate in aqueous media without the use of a metal catalyst. Polyethylenimine (PEI) functions as a co-catalyst by significantly reducing catalytic overpotential and increasing current density and efficiency. The co-catalysis appears to help in stabilizing the singly reduced intermediate CO2(•-) and concentrating CO2 in the PEI overlayer.

A general electropolymerization/electro-oligomerization strategy is described for preparing spatially controlled, multicomponent films and surface assemblies having both light harvesting chromophores and water oxidation catalysts on metal oxide electrodes for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The chromophore/catalyst ratio is controlled by the number of reductive electrochemical cycles. Catalytic rate constants for water oxidation by the polymer films are similar to those for the phosphonated molecular catalyst on metal oxide electrodes, indicating that the physical properties of the catalysts are not significantly altered in the polymer films. Controlled potential electrolysis shows sustained water oxidation over multiple hours with no decrease in the catalytic current.

Oxidation of the NADH analogue, N-benzyl-1,4-dihydronicotinamide (BNAH), by the 1e(-) acceptor, [Os(dmb)3](3+), and 2e(-)/2H(+) acceptor, benzoquinone (Q), has been investigated in aqueous solutions over extended pH and buffer concentration ranges by application of a double-mixing stopped-flow technique in order to explore the redox pathways available to this important redox cofactor. Our results indicate that oxidation by quinone is dominated by hydride transfer, and a pathway appears with added acids involving concerted hydride-proton transfer (HPT) in which synchronous transfer of hydride to one O-atom at Q and proton transfer to the second occurs driven by the formation of the stable H2Q product. Oxidation by [Os(dmb)3](3+) occurs by outer-sphere electron transfer including a pathway involving ion-pair preassociation of HPO4(2-) with the complex that may also involve a concerted proton transfer.

The six-coordinate Fe(III)-aqua complex [Fe(III)(dpaq)(H2O)](2+) (1, dpaq is 2-[bis(pyridine-2-ylmethyl)]amino-N-quinolin-8-yl-acetamido) is an electrocatalyst for water oxidation in propylene carbonate-water mixtures. An electrochemical kinetics study has revealed that water oxidation occurs by oxidation to Fe(V)(O)(2+) followed by a reaction first order in catalyst and added water, respectively, with ko = 0.035(4) M(-1) s(-1) by the single-site mechanism found previously for Ru and Ir water oxidation catalysts. Sustained water oxidation catalysis occurs at a high surface area electrode to give O2 through at least 29 turnovers over an 15 h electrolysis period with a 45% Faradaic yield and no observable decomposition of the catalyst.

Surface-initiated, oligomeric assemblies of ruthenium(II) vinylpolypyridyl complexes have been grown within the cavities of mesoporous nanoparticle films of TiO2 by electrochemically controlled radical polymerization. Surface growth was monitored by cyclic voltammetry as well as UV/Vis and X-ray photoelectron spectroscopy. Polymerization occurs by a radical chain mechanism following cyclic voltammetry scans to negative potentials where reduction occurs at the π* levels of the polypyridyl ligands. Oligomeric growth within the cavities of the TiO2 films occurs until an average of six repeat units are added to the surface-bound initiator site, which is in agreement with estimates of the internal volumes of the pores in the nanoparticle films.

Solvent and temperature dependent paramagnetism is reported for the complex [Ru(II)(bpy)2(phendione)](PF6)2 (bpy = 2,2'-bipyridine, phendione = 1,10-phenanthroline-5,6-dione), . Magnetometry, (1)H-NMR, EPR and substituent effects confirm that the paramagnetic character is localized on the phendione ligand, and arises due to mixing of the MLCT excited state with an open shell triplet state on the phendione moiety, a process that is most likely driven by aromatization. The stabilized open shell phendione structure, in which the triplet lies lower in energy than the singlet, can then be thermally populated from the ground state of the complex. This process is facilitated by admixture of singlet character from the MLCT state. Paramagnetic behavior is absent in the free phendione ligand, and disappears in the presence of Lewis acids and in the presence of water due to hydrogen bonding (or hydrate formation at sufficient water concentrations). Control experiments rule out the presence of monoradicals such as semiquinone anions. Implications for spin filtering, sensing, and other electronic applications using such structures are discussed.

Enhancing the surface binding stability of chromophores, catalysts, and chromophore-catalyst assemblies attached to metal oxide surfaces is an important element in furthering the development of dye sensitized solar cells, photoelectrosynthesis cells, and interfacial molecular catalysis. Phosphonate-derivatized catalysts and molecular assemblies provide a basis for sustained water oxidation on these surfaces in acidic solution but are unstable toward hydrolysis and loss from surfaces as the pH is increased. Here, we report enhanced surface binding stability of a phosphonate-derivatized water oxidation catalyst over a wide pH range (1-12) by atomic layer deposition of an overlayer of TiO2. Increased stability of surface binding, and the reactivity of the bound catalyst, provides a hybrid approach to heterogeneous catalysis combining the advantages of systematic modifications possible by chemical synthesis with heterogeneous reactivity. For the surface-stabilized catalyst, greatly enhanced rates of water oxidation are observed upon addition of buffer bases -H2PO(-)(4)/HPO(2-)(4), B(OH)3/B(OH)2 O-, HPO(2-)4 /PO(3-)(4) - and with a pathway identified in which O-atom transfer to OH(-) occurs with a rate constant increase of 10(6) compared to water oxidation in acid.

Device lifetimes and commercial viability of dye-sensitized solar cells (DSSCs) and dye-sensitized photoelectrosynthesis cells (DSPECs) are dependent on the stability of the surface bound molecular chromophores and catalysts. Maintaining the integrity of the solution-metal oxide interface is especially challenging in DSPECs for water oxidation where it is necessary to perform high numbers of turnovers, under irradiation in an aqueous environment. In this study, we describe the atomic layer deposition (ALD) of TiO2 on nanocrystalline TiO2 prefunctionalized with the dye molecule [Ru(bpy)2(4,4'-(PO3H2)bpy)](2+) (RuP) as a strategy to stabilize surface bound molecules. The resulting films are over an order of magnitude more photostable than untreated films and the desorption rate constant exponentially decreases with increased thickness of ALD TiO2 overlayers. However, the injection yield for TiO2-RuP with ALD TiO2 also decreases with increasing overlayer thickness. The combination of decreased injection yield and 95% quenched emission suggests that the ALD TiO2 overlayer acts as a competitive electron acceptor from RuP*, effectively nonproductively quenching the excited state. The ALD TiO2 also increases back electron transfer rates, relative to the untreated film, but is independent of overlayer thickness. The results for TiO2-RuP with an ALD TiO2 overlayer are compared with similar films having ALD Al2O3 overlayers.

A procedure is described for preparing and derivatizing novel, high surface area electrodes consisting of thin layers of nanostructured ITO (Sn(IV)-doped indium tin oxide, nanoITO) on reticulated vitreous carbon (RVC) to give RVC|nanoITO. The resulting hybrid electrodes are highly stabilized oxidatively. They were surface-derivatized by phosphonate binding of the electrocatalyst, [Ru(Mebimpy)(4,4′-((HO)2OPCH2)2bpy)(OH2)]2+ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl)pyridine; bpy = 2,2′-bipyridine) (1-PO3H2) to give RVC|nanoITO-RuII-OH22+. The redox properties of the catalyst are retained on the electrode surface. Electrocatalytic oxidation of benzyl alcohol to benzaldehyde occurs with a 75% Faradaic efficiency compared to 57% on nanoITO. Electrocatalytic water oxidation at 1.4 V vs SCE on derivatized RVC|nanoITO electrode with an internal surface area of 19.5 cm2 produced 7.3 μmoles of O2 in 70% Faradaic yield in 50 min.

A ruthenium containing polymer featuring a short carbonyl-amino-methylene linker has been prepared by atom transfer radical polymerization (ATRP). The polymer was derived from ATRP of the N-hydroxysuccinimide (NHS) derivative of p-vinylbenzoic acid, followed by an amide coupling reaction of the NHS-polystyrene with Ru(II) complexes derivatized with aminomethyl groups (i.e., [Ru(bpy)2(CH3-bpy-CH2NH2)](2+) where bpy is 2,2'-bipyridine, and CH3-bpy-CH2NH2 is 4-methyl-4'-aminomethyl-2,2'-bipyridine). The Ru-functionalized polymer structure was confirmed by using nuclear magnetic resonance and infrared spectroscopy, and the results suggest that a high loading ratio of polypyridylruthenium chromophores on the polystyrene backbone was achieved. The photophysical properties of the polymer were characterized in solution and in rigid ethylene glycol glasses. In solution, emission quantum yield and lifetime studies reveal that the polymer's metal-to-ligand charge transfer (MLCT) excited states are quenched relative to a model Ru complex chromophore. In rigid media, the MLCT-ground state band gap and lifetime are both increased relative to solution with time-resolved emission measurements revealing fast energy transfer hopping within the polymer. Molecular dynamics studies of the polymer synthesized here as well as similar model systems with various spatial arrangements of the pendant Ru complex chromophores suggest that the carbonyl-amino-methylene linker probed in our target polymer provides shorter Ru-Ru nearest-neighbor distances leading to an increased Ru*-Ru energy hopping rate, compared to those with longer linkers in counterpart polymers.

A self-assembly-formed triglycylglycine macrocyclic ligand (TGG(4-)) complex of Cu(II), [(TGG(4-))Cu(II)-OH(2)](2-), efficiently catalyzes water oxidation in a phosphate buffer at pH 11 at room temperature by a well-defined mechanism. In the mechanism, initial oxidation to Cu(III) is followed by further oxidation to a formal "Cu(IV)" with formation of a peroxide intermediate, which undergoes further oxidation to release oxygen and close the catalytic cycle. The catalyst exhibits high stability and activity toward water oxidation under these conditions with a high turnover frequency of 33 s(-1).

The rate of electrocatalytic water oxidation by the heterogeneous water oxidation catalyst [Ru(bda)(4-O(CH2)3P(O3H2)2-pyr)2], 1, (pyr = pyridine; bda = 2,2′-bipyridine-6,6′-dicarboxylate) on metal oxide surfaces is greatly enhanced relative to water as the solvent. In these experiments with propylene carbonate (PC) as the nonaqueous solvent, water is the limiting reagent. Mechanistic studies point to atom proton transfer (APT) as the rate limiting step in water oxidation catalysis.

A series of phosphonate-derivatized, high redox potential porphyrins with mesityl, pentafluorophenyl, and heptafluoropropyl meso-substituents were synthesized by acid-catalyzed condensation reactions. Ground and excited state redox potentials in the series were varied systematically with the electron-donating or electron-accepting nature of the meso-substitutents. The extent of excitation and injection by porphyrin singlet excited states surface-bound to SnO2/TiO2 core/shell metal oxide nanoparticle films varies with the excited state reduction potential, E°(')(P(+)/P*). With the mesityl-substituted porphyrin, high current density and sustained photocurrents are observed at pH 7 with the addition of the electron transfer donor hydroquinone.

Copper leads to a breakup: simple Cu(II) salts are shown to be highly reactive as water oxidation electrocatalysts in neutral to weakly basic aqueous buffer solutions of CO(2)/HCO(3)(-)/CO(3)(2-) or HPO(4)(2-)/PO(4)(3-). Coordination to the buffer anions under these conditions prevents the precipitation of Cu(OH)(2), CuCO(3), or Cu(3)(PO(4))(2) and appears to stabilize higher oxidation states of copper.

Benzoquinone/hydroquinone redox interconversion by the reversible Os(dmb)(3)(3+/2+) couple over an extended pH range with added acids and bases has revealed the existence of seven discrete pathways. Application of spectrophotometric monitoring with stopped-flow mixing has been used to explore the role of PCET. The results have revealed a role for phosphoric acid and acetate as proton donor and acceptor in the concerted electron-proton transfer reduction of benzoquinone and oxidation of hydroquinone, respectively.

During efforts to stabilize metal oxide bound chromophores for photoelectrochemical applications, a novel photochemical reaction has been discovered. In the reaction, the bisphosphonate functional groups -C(PO(3)H(2))(2)(OH) in the metal complex [Ru(bpy)(2)(4,4'-(C(OH)(PO(3)H(2))(2)bpy)](2+) are converted into -COOH and H(3)PO(4). The reaction occurs by sensitized formation of (1)O(2) by the lowest metal-to-ligand charge transfer excited state(s) of [Ru(bpy)(2)(4,4'-(C(PO(3)H(2))(2)(OH))(2)(bpy))](2+)* followed by (1)O(2) oxidation of the bisphosphonate substituent. A related reaction occurs for the bisphosphonate-based drug, risedronic acid, in the presence of O(2), light, and a singlet oxygen sensitizer ([Ru(bpy)(3)](2+) or Rose Bengal).

The metal complex [(tpy)(Mebim-py)Ru II (S)] 2+ (tpy = 2,2 ′ : 6 ′ ,2 ′′ -terpyridine; Mebim-py = 3-methyl-1-pyridylbenzimidazol-2-ylidene; S = solvent) is a robust, reactive electrocatalyst toward both water oxidation to oxygen and carbon dioxide reduction to carbon monoxide. Here we describe its use as a single electrocatalyst for CO 2 splitting, CO 2 → CO + 1/2 O 2 , in a two-compartment electrochemical cell.

The catalyst [Ru(Mebimpy)(4,4′-((HO)2OPCH2)2bpy(OH2)]2+, where Mebimpy is 2,6-bis(1-methylbenzimidazol-2-yl)pyridine and 4,4′-((HO)2OPCH2)2bpy is 4,4′-bis-methlylenephosphonato-2,2′-bipyridine, attached to nanocrystalline Sn(IV)-doped In2O3 (nanoITO) electrodes (nanoITO|RuII–OH22+) has been utilized for the electrocatalytic oxidation of the alkylaromatics ethylbenzene, toluene, and cumene in propylene carbonate/water mixtures. Oxidative activation of the surface site to nanoITO|RuV(O)3+ is followed by hydrocarbon oxidation at the surface with a rate constant of 2.5 ± 0.2 M–1 s–1 (I = 0.1 M LiClO4, T = 23 ± 2 °C) for the oxidation of ethylbenzene. Electrocatalytic oxidation of ethylbenzene to acetophenone occurs with a faradic efficiency of 95%. H/D kinetic isotope effects determined for oxidation of ethylbenzene point to a mechanism involving oxygen atom insertion into a C–H bond of ethylbenzene followed by further 2e–/2H+ oxidation to acetophenone.

Four distinct intermediates, Ru(IV)═O(2+), Ru(IV)(OH)(3+), Ru(V)═O(3+), and Ru(V)(OO)(3+), formed by oxidation of the catalyst [Ru(Mebimpy)(4,4'-((HO)(2)OPCH(2))(2)bpy)(OH(2))](2+) [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) and 4,4'-((HO)(2)OPCH(2))(2)bpy = 4,4'-bismethylenephosphonato-2,2'-bipyridine] on nanoITO (1-PO(3)H(2)) have been identified and utilized for electrocatalytic benzyl alcohol oxidation. Significant catalytic rate enhancements are observed for Ru(V)(OO)(3+) (~3000) and Ru(IV)(OH)(3+) (~2000) compared to Ru(IV)═O(2+). The appearance of an intermediate for Ru(IV)═O(2+) as the oxidant supports an O-atom insertion mechanism, and H/D kinetic isotope effects support net hydride-transfer oxidations for Ru(IV)(OH)(3+) and Ru(V)(OO)(3+). These results illustrate the importance of multiple reactive intermediates under catalytic water oxidation conditions and possible control of electrocatalytic reactivity on modified electrode surfaces.

Nanosecond laser flash photolysis and photocurrent measurements have been used to investigate use of [(Ru(bpy)2(4,4′-(PO3H2)2bpy)]2+ attached to TiO2 nanoparticle films, TiO2−RuII, in a dye-sensitized photoelectrosynthesis cell (DSPEC) configuration for H2 production. In these experiments, laser flash excitation of TiO2−RuII and rapid injection lead to TiO2(e−)−RuIII with subsequent TiO2(e−)−RuIII → TiO2−RuII back electron transfer monitored on the nsec time scale with and without added triethanolamine (TEOA) and deprotonated ethylenediaminetetraacetic tetra-anion (EDTA4−) as irreversible electron transfer donors. With added TEOA or EDTA4−, a competition exists between back electron transfer and scavenger oxidation with the latter leading to H2 production in the photoelectrosynthesis cell. Reduction of TiO2(e−)−RuIII by both TEOA and EDTA4− occurs with kD ∼ 106 M−1 s−1. EDTA4− is a more efficient scavenger by a factor of ∼3 because of a more favorable partition equilibrium between the film and the externa...

Compared to earlier single site catalysts, greatly enhanced rates of electrocatalytic water oxidation by the Ru carbene catalyst [Ru(tpy)(Mebim-py)(OH(2))](2+) (tpy = 2,2':6',2''-terpyridine; Mebim-py = 3-methyl-1-pyridylbenzimidazol-2-ylidene) have been observed. The mechanism appears to be the same with proton coupled electron transfer (PCET) activation to Ru(V)=O(3+) followed by O-O coupling and further oxidation. An important factor in the enhanced reactivity of the carbene complex may come from increased driving force for the O-O bond forming step.