Search

Ionic liquids (ILs) with aprotic heterocyclic anions (AHAs) have been developed primarily for CO2 capture applications. However, they have also been considered for cofluid CO2/IL vapor compression refrigeration cycles and for various electrochemical applications. In all of these cases, reducing the viscosity of the IL is of primary importance. Therefore, the focus of this work is tuning the cation to produce AHA ILs with both low viscosities and low melting points. Toward this goal we have synthesized 40 AHA ILs paired with phosphonium, ammonium and imidazolium cations, as well as a number of ILs with the bis(trifluoromethylsulfonyl)imide anion to use for comparison. The azolide anions investigated were 2-cyanopyrrolide, 4-nitropyrazolide, various substituted imidazolides, 1,2,3-triazolide, and tetrazolide. Melting points, glass transition temperatures, and decomposition temperatures were measured for all ILs. Viscosities and densities were measured from 278.15 to 343.15 K and 283.15 to 353.15 K, respecti...

We show that phosphonium azolide ionic liquids of interest for CO2 capture applications react with CO2 both through the normal anion channel and, at elevated temperatures, through a previously unrecognized cation channel. The reaction is caused by an interaction between the anion and cation that allows proton transfer, and involves a phosphonium ylide intermediate. The cation reaction can be mitigated by using ammonium rather than phosphonium cations. Thus, phosphonium and ammonium cations paired with aprotic heterocyclic anions (AHAs) react with CO2 through different mechanisms at elevated temperatures. This work shows that careful consideration of both physical properties and chemical reactivity of ILs based on AHA anions is needed when designing ionic liquids for CO2 separations.

Ionic liquids (ILs) have been received significant attention in recent years due to their outstanding properties, such as negligibly small vapor pressure, high thermal stability, relatively high conductivity and wide electrochemical windows. [1-3] Especially in the electrochemical field, ILs have been intensively investigated as alternatives for common flammable and volatile organic solvents. [4] A series of novel ionic liquids based on N,N′dialkyimidazolium, alkylphosphonium and N,N′dialkylpyrrolidinium cations paired with two aprotic heterocyclic anions (AHAs) were synthesized in the present study. In addition, their corresponding lithium salts were prepared. Physicochemical and electrochemical properties of the neat ILs and their lithium salt mixtures at various concentrations were measured from 283.15K to 343.15K at atmosphere pressure. Properties investigated include density (ρ), viscosity (η), electrical conductivity (σ), melting point (Tm), and thermal decomposition temperature (Td). Generally, the densities of all the neat ILs and their mixtures with the corresponding lithium salts follow a linear relationship with temperature and decrease with increasing temperature. The densities of all the IL mixtures with lithium salts increased with increasing lithium salt concentrations. The temperature dependence of the viscosity and the electrochemical conductivity were investigated for all neat ILs and lithium salt doped ILs. The empirical Vogel-Fulcher-Tammann (VFT) equation was used to analyze the viscosity and the electrical conductivity experimental results, which gave excellent fits over the temperature range studied.

The synthesis, complete characterization, and solid state conformation of a new series of p-tert-butylcalix[5]arene (ButC5) mono-, di-, tri- and pentaanions are reported. X-ray structures of the alkali metal salts illustrate the strong influence of the alkali metal ion on the structure of the calixanion. The strength of the alkali metal base and its reaction stoichiometry play an important role in the conformation and level of deprotonation of the resulting anion. Reaction of ButC5 in a 2:1 molar ratio with alkali metal bases M2CO3 (M = Rb, Cs), or in a 1:1 ratio with M2CO3 (M = Na, K), MOH (M = Na, K, Rb, Cs) or MH (M = Li, Na) produces ButC5 monoanions, but ButC5 reacts in a 1:1 molar ratio with M2CO3 (M = Rb, Cs) or a 1:2 molar ratio with MOC(CH3)3 (M = Na, K) to afford ButC5 dianions. Due to the steric bulkiness of the But group no polymeric structures are observed. Alkali metal salts of trianionic ButC5 were obtained in high yields from reactions of ButC5 with MOC(CH3)3 (M = Li, Na, K), BunLi, LiH and LiOH in a 1:3 molar ratio. Pentaanionic ButC5 salts were obtained by the reaction with MOC(CH3)3 (M = Li, Na, K) or BunLi in a 5:1 ratio. X-ray crystal structures of ButC5 · Na and ButC5 · Cs indicate that the size of the alkali metal influences the level of cation-π arene interactions and therefore the conformation of the ButC5 unit; for example, ButC5 · Na has a cone conformation while ButC5 · Cs shows a flattened cone conformation. Cation-π arene interactions are observed in most of the calixarene salts.

Ionic liquids (ILs) with aprotic heterocyclic anions, or AHAs, can bind CO2 with reaction enthalpies that are suitable for gas separations and without suffering large viscosity increases. In the present work, we have synthesized ILs bearing an alkyl-phosphonium cation with indazolide, imidazolide, pyrrolide, pyrazolide and triazolide-based anions that span a wide range of predicted reaction enthalpies with CO2. Each AHA-based IL was characterized by NMR spectroscopy and their physical properties (viscosity, glass transition, and thermal decomposition temperature) determined. In addition, the influence of substituent groups on the reaction enthalpy was investigated by measuring the CO2 solubility in each IL at pressures between 0 and 1 bar at 22 °C using a volumetric method. The isotherm-derived enthalpies range between -37 and -54 kJ mol(-1) of CO2, and these values are in good agreement with computed enthalpies of gas-phase IL-CO2 reaction products from molecular electronic structure calculations. The AHA ILs show no substantial increase in viscosity when fully saturated with CO2 at 1 bar. Phase splitting and compositional analysis of one of the IL/H2O and IL/H2O/CO2 systems conclude that protonation of the 2-cyanopyrrolide anion is improbable, and this result was confirmed by the equimolar CO2 absorption in the presence of water. Taking advantage of the tunable binding energy and absence of viscosity increase after the reaction with CO2, AHA ILs are promising candidates for efficient and environmental-friendly absorbents in postcombustion CO2 capture.

New sterically encumbered tripodal aminetris(aryloxide) ligands N(CH(2)C(6)H(2)-3-(t)Bu-5-X-2-OH)(3) ((tBu,X)LH(3)) with relatively electron-rich phenols are prepared by Mannich condensation (X = OCH(3)) or by a reductive amination/Hartwig-Buchwald amination sequence on the benzyl-protected bromosalicylaldehyde (X = N[C(6)H(4)-p-OCH(3)](2)), followed by debenzylation using Pearlman's catalyst (Pd(OH)(2)/C). The analogous dianisylamino-substituted compound lacking the tert-butyl group ortho to the phenol ((H,An(2)N)LH(3)) is also readily prepared. The ligands are metalated by titanium(IV) tert-butoxide to form the five-coordinate alkoxides LTi(O(t)Bu). Treatment of the tert-butoxides with aqueous HCl yields the five-coordinate chlorides LTiCl, and with acetylacetone gives the six-coordinate diketonates LTi(acac). The diketonate complexes (tBu,X)LTi(acac) show reversible ligand-based oxidations with first oxidation potentials of +0.57, +0.33, and -0.09 V (vs ferrocene/ferrocenium) for X = (t)Bu, MeO, and An(2)N, respectively. Both dianisylamine-substituted complexes (R,An(2)N)LTi(acac) (R = (t)Bu, H) show similar electrochemistry, with three one-electron oxidations closely spaced at approximately 0 V and three oxidations due to removal of a second electron from each diarylaminoaryloxide arm at approximately + 0.75 V. The new electron-rich tripodal ligands therefore have the capacity to release multiple electrons at unusually low potentials for aryloxide groups.

Ionic liquids (ILs) are attractive alternatives to water, high temperature molten salts or conventional organic solvents for electrodeposition of technologically important metals. Designing ILs containing functional groups specifically targeted to interact with or even chelate metals, such as carboxylate, may increase the metal solubility and affect thermodynamic and electrochemical properties. This paper reports the synthesis and characterization of three ionic liquids comprised of one or two tetra-alkyl phosphonium cations paired with a hydrogen oxalate or oxalate anion, with the general formula [(PRRRR′)x][C2O4H2−x], R = 4,6 and R′ = 4, 14. These compounds were characterized by 1H, 13C, 31P NMR, and Raman spectroscopy. Electrochemical windows, electrical conductivities, densities and viscosities were also determined experimentally. Thermal gravimetric analysis (TGA) revealed decomposition temperatures above 200 °C and differential scanning calorimetry (DSC) analysis revealed that the two [(P66614)x][C2O4H2−x] salts have similar glass transition temperatures while [(P4444)2][C2O4] has a melting point above room temperature. Raman and powder X-ray diffraction spectroscopy confirm that Nd2O3 dissolves and complexes with [P66614][C2O4].

The carboxyl-functionalized phosphonium ionic liquid (IL), [HCTMP][Tf(2)N], enabled the directed nucleation of monomeric or dimeric uranyl(vi) compounds. This new IL is the first carboxyl-functionalized IL which is liquid at room temperature and exhibits a wider electrochemical window and lower melting point than its ammonium analogue.

A series of novel ionic liquids (ILs) based on N, N'- dialkylimidazolium, tetra-alkylphosphonium and dialkylpyrrolidinium cations paired with two aprotic heterocyclic anions (AHAs) were synthesized in the present study. In addition, lithium salts of the corresponding anions were prepared. Physicochemical and electrochemical properties of the neat ILs and their mixtures with the lithium salts at various concentrations were systematically measured from 283.15K to 343.15K at atmospheric pressure, including density (ρ), viscosity (η) and electrical conductivity (σ). The empirical Vogel-Fulcher-Tammann (VFT) was used to analyze the experimental viscosities and electrochemical conductivities. Furthermore, the Walden plot behavior of the pure ILs and ILs doped with lithium salts were investigated. The results provide some insight into the strength of the association between Li+ and the different anions. Consequently, the ILs with low viscosity and good conductivities are promising electrolytes candidates to be used in electrochemical applications.

A diarylamino-substituted N-methyl tetrahydrosalen (salan) ligand, (An2N)LH(2), is prepared in four steps and overall 53% yield from 5-bromosalicylaldehyde, with the key step a palladium-catalysed Hartwig-Buchwald amination of the tert-butyldimethylsilyl-protected 5-bromo-N-methylsalan ligand. Reaction of (An2N)LH(2) or its bromo analogue with Ti(O(i)Pr)(4) or TiF(4) results in metalation of the ligand. The isopropoxide groups are readily exchanged with α- or β-hydroxyacids to form chelated complexes. X-ray crystallography and NMR spectroscopy indicate that the salan ligands are quite flexible, with (An2N)LTiF(2), for example, showing four stereoisomers in its (19)F NMR spectrum. The major stereoisomer of (salan)Ti(X)(Y) depends principally on the trans influence of the X and Y groups. Complexes of (An2N)L show two reversible, closely spaced redox couples at approximately + 0.1 V vs. ferrocene/ferrocenium, and a second set of two closely spaced redox couples at ~ + 0.8 V vs. Fc/Fc(+).