Search

Abstract: Stereocomplex (SC) crystallization between poly( l‐lactide) (PLLA) and poly( d‐lactide) (PDLA) exhibits tremendous potential to improve the properties of polylactide (PLA), but the practical processing of SC‐type PLA (SC‐PLA) is significantly hindered by the insufficient melt stability and serious degradation after complete melting of SC crystallites over 240 °C. In a previous work, powder metallurgy inspired low‐temperature (180–210 °C) compression sintering is proposed to fabricate SC‐PLA products from its nascent powder. However, its industrial application is still challenging mainly due to the low production efficiency (half an hour is required) as well as the weak ability to fabricate products with complex shapes. In this work, an effort to rapidly fabricate complex‐shaped SC‐PLA products using low‐temperature injection molding technology is reported, where SC‐PLA nascent powder is partially melted. To ensure appropriate powder flowability, small amounts of glyceryl monostearate are incorporated as a lubricant. The results show that, both the self‐nucleation and flow‐induced nucleation effects facilitate the SC crystallization across the interfaces between adjacent unmelted powder particles, which considerably shortens the sintering cycle to about 2 min. In this way, complex‐shaped SC‐PLA products (such as gears) with superb performance are successfully fabricated by injection molding for the first time. [ABSTRACT FROM AUTHOR]

As a popular "green" engineering plastic, stereocomplex-type polylactide (SC-PLA) exhibits great application potential in various fields owing to its outstanding physicochemical performance and durability. However, the applications of SC-PLA still face formidable challenges mostly associated with its inferior melt-processability (i.e., the weak melt memory effect to motivate exclusive SC crystallization and extremely low melt viscosity) and the lack of necessary functional features (e.g., electrical conductivity) in some cases. Herein, we devise a facile and robust strategy to overcome these obstacles by incorporating carbon black (CB) into equimolar poly(L-lactide)/poly(D-lactide) (PLLA/PDLA) blend. It is interesting to find that the CB particles can adsorb many PLLA/PDLA chain segments on their surface and such strongly adsorbed PLA segments could interact with PLA chains outside the surface to form physical junctions capable of stabilizing the PLLA/PDLA chain assemblies in the melt, finally inducing the exclusive SC formation during subsequent crystallization. Meanwhile, the CB particles can substantially enhance the melt viscosity of the blend (from 3.9 Pa s to 844.1 Pa s when measuring at 250 °C and 50 Hz). Because of the greatly improved melt-processability, the PLLA/PDLA/CB composites have been successfully processed into highly crystalline products with exclusive SC crystallites and excellent thermomechanical performance by injection molding. Additionally, the CB particles can endow the composite products with fascinating electrical conductivity (19.0 S/m) and electromagnetic interference shielding effectiveness (26.6 dB). This work could open up a promising avenue towards high-performance and multifunctional PLA engineering Bioplastic. Image 1 • CB particles are used to improve the melt-processability and electrical performance of SC-PLA. • The CB particles exhibit strong adsorbability for PLLA/PDLA chain segments. • The adsorbed PLA segments contribute to the greatly enhanced melt memory effect and melt viscosity. • The PLLA/PDLA/CB composites can be injection molded into products with exclusive SC crystallites. • The obtained products possess superb thermomechanical and electrical properties. [ABSTRACT FROM AUTHOR]