Search

The retrieval of cloud parameters from the atmospheric Sentinel missions require Earth reflectance measurements from a set of spectral bands. Frequently, the ground pixel footprints of the involved spectral bands are not fully aligned and therefore, special treatment is required within the operational algorithms. This so-called inter-band spatial mis-registration of passive spectrometers is present when the Earth reflectance measurements in different spectral bands are captured by different spectrometers. The cloud retrieval algorithm requires reflectance measurements in the UV (ultraviolet)/VIS (visible) band, where the first cloud parameter (i.e., radiometric cloud fraction) is retrieved from the OCRA (Optical Cloud Recognition Algorithm) algorithm. In addition, Earth reflectances in the NIR (near-infrared) band are needed for the retrieval of two additional cloud parameters (i.e., cloud height and cloud albedo or cloud-top height and optical thickness) from the ROCINN (Retrieval of Cloud Information using Neural Networks) algorithm. In the former TROPOMI (TROPOspheric Monitoring Instrument)/S5P (Sentinel-5 Precursor) retrieval, a co-registration scheme of the derived cloud parameters from the source band to the target band based on pre-calculated mapping weights from UV/VIS to NIR, and vice versa, is applied. In this paper we present a new scheme for the co-registration of the TROPOMI cloud parameters using collocated VIIRS (Visible Infrared Imaging Radiometer Suite)/SNPP (Suomi National Polar-orbiting Partnership) information. A great benefit of the new co-registration scheme based on the VIIRS data is that it improves the overall quality of the TROPOMI cloud products and, in addition, it allows the re-construction of the cloud parameters on the first UV/VIS detector pixel, which was impossible with the former scheme based on the static mapping tables. The latter practically means that a significant number of valid data points are added to the TROPOMI cloud, total ozone, SO2 and HCHO product since November 26th 2023 (orbit 31705), when the UPAS version 2.6 with the new co-registration scheme was activated operationally. From a comparison analysis between the two techniques, we found that the largest differences mainly appear for inhomogeneous scenes. From a validation exercise of TROPOMI against VIIRS in the across-track flight direction, we found that the old co-registration scheme tends to smooth out cloud structures along the scanline, whereas such structures can be maintained with the new scheme. The need to implement a similar inter-band spatial co-registration scheme is foreseen for the Sentinel-4/MTG-S (Meteosat Third Generation - Sounder) and Sentinel-5/MetOp-SG (Meteorological Operational Satellite - Second Generation) missions. In the case of Sentinel-4 instrument, the external cloud information will originate from collocated FCI (Flexible Combined Imager) data, on board the MTG-I (Meteosat Third Generation - Imager) satellite. [ABSTRACT FROM AUTHOR]

Accurate knowledge of cloud properties is essential to the measurement of atmospheric composition from space. In this work we assess the quality of the cloud data from three Copernicus Sentinel-5 Precursor (S5P) TROPOMI cloud products: (i) S5P OCRA/ROCINN_CAL (Optical Cloud Recognition Algorithm/Retrieval of Cloud Information using Neural Networks;Clouds-As-Layers), (ii) S5P OCRA/ROCINN_CRB (Clouds-as-Reflecting Boundaries), and (iii) S5P FRESCO-S (Fast Retrieval Scheme for Clouds from Oxygen absorption bands – Sentinel). Target properties of this work are cloud-top height and cloud optical thickness (OCRA/ROCINN_CAL), cloud height (OCRA/ROCINN_CRB and FRESCO-S), and radiometric cloud fraction (all three algorithms). The analysis combines (i) the examination of cloud maps for artificial geographical patterns, (ii) the comparison to other satellite cloud data (MODIS, NPP-VIIRS, and OMI O2 – O2), and (iii) ground-based validation with respect to correlative observations (30 April 2018 to 27 February 2020) from the Cloudnet network of ceilometers, lidars, and radars. Zonal mean latitudinal variation of S5P cloud properties is similar to that of other satellite data. S5P OCRA/ROCINN_CAL agrees well with NPP VIIRS cloud-top height and cloud optical thickness and with Cloudnet cloud-top height, especially for the low (mostly liquid) clouds. For the high clouds, S5P OCRA/ROCINN_CAL cloud-top height is below the cloud-top height of VIIRS and of Cloudnet, while its cloud optical thickness is higher than that of VIIRS. S5P OCRA/ROCINN_CRB and S5P FRESCO cloud height are well below the Cloudnet cloud mean height for the low clouds but match on average better with the Cloudnet cloud mean height for the higher clouds. As opposed to S5P OCRA/ROCINN_CRB and S5P FRESCO, S5P OCRA/ROCINN_CAL is well able to match the lowest CTH mode of the Cloudnet observations. Peculiar geographical patterns are identified in the cloud products and will be mitigated in future releases of the cloud data products. [ABSTRACT FROM AUTHOR]

The operational TROPOMI/Sentinel-5 Precursor cloud parameters are retrieved using OCRA (Optical Cloud Recognition Algorithm) and ROCINN (Retrieval of Cloud Information using Neural Networks) algorithms that have been successfully applied to the prior operational processing of GOME/ERS-2 and GOME-2 MetOp-A/B data. The ROCINN algorithm retrieves cloud height, cloud optical thickness and cloud albedo from NIR measurements in and around the oxygen A-band (~760nm) taking as a-priori the radiometric cloud fraction (Loyola et al., 2018). The latter is computed by the OCRA algorithm which is based on a broad-band UV/VIS color space approach (Lutz et al., 2016). Two models which treat the clouds differently are implemented in the ROCINN algorithm. The first approach called Clouds-as-Reflecting-Boundaries (CRB) assumes that the cloud is a reflecting surface whereas the second and more realistic model called Clouds-as-Layers (CAL) represents the cloud as a homogeneous cluster of scattering spherical particles. The loose formation of the Suomi-NPP satellite with Sentinel-5 Precursor (S5P) enables the direct comparison of the TROPOMI cloud properties against VIIRS cloud products. The ROCINN cloud parameters (i.e., cloud top height and optical thickness) from S5P are compared against the VIIRS cloud product developed by NASA. The VIIRS products are re-gridded to the footprints of TROPOMI. The initial results showed high correlation with a negative bias for the cloud top height and a positive bias for the cloud optical thickness. The bias in the cloud optical thickness is significantly smaller for the continental clouds and the bias in the cloud top height is smaller for the marine clouds. Some discrepancies have been observed for the convective clouds associated with a high top above 6 km and large optical thickness over 23, following the cloud classification from the international satellite cloud climatology project (ISCCP). Other discrepancies have been also identified on ice phase clouds like cirrus/cirrostratus. The improvement of the retrieved cloud top height in deep convective and ice clouds is a challenge for the coming Copernicus mission Sentinel-4 which is planned to be launched in 2023. The latter involves a better parameterization of ice crystal. [ABSTRACT FROM AUTHOR]

The Copernicus mission Sentinel-5 Precursor is focused on trace gas, aerosol and cloud retrieval and operates in the UV/VIS/NIR/SWIR spectral region.In this work we present the algorithms for retrieving the operational cloud products from TROPOMI onboard Sentinel-5 Precursor. The cloud retrieval algorithms OCRA (Optical Cloud Recognition Algorithm) and ROCINN (Retrieval of Cloud Information using Neural Networks) have their heritage with GOME/ERS-2 and GOME-2 MetOp-A/B, where they have already been successfully implemented in an operational environment.OCRA employs a broad band color space approach and, in combination with a set of cloud-free reflectance background composite maps, determines a radiometric cloud fraction by making use of the assumption that clouds usually have a higher reflectance than the surrounding surface and that the cloud reflectance is almost wavelength independent across the UV/VIS/NIR wavelength region. The ROCINN algorithm retrieves cloud top height, cloud optical thickness and cloud albedo from NIR measurements in and around the oxygen A-band, taking as a priori input the cloud fraction computed by OCRA.The cloud parameters retrieved by ROCINN are provided for two different cloud models. One which treats clouds more realistically as layers of scattering water droplets (clouds-as-layers, CAL) and one which treats clouds as simple Lambertian reflectors (clouds-as-reflecting boundaries, CRB).The current implementation status and setup of the algorithms is presented along with monthly statistics for the cloud parameters, individual application examples as well as satellite-to-satellite comparisons with VIIRS on Suomi-NPP. [ABSTRACT FROM AUTHOR]