Search

In Poland and other countries in Central Europe, residential buildings from the second half of the 20th century dominate, which have recently undergone deep thermomodernisation. Research on the retrofitting of residential buildings has focused mainly on energy efficiency, with only a few studies on indoor air quality. The aim of this study was to present a comparative analysis of the impact of five ventilation scenarios (three natural and two mechanical) on CO2 concentration and energy demand for heating and ventilation in residential spaces of a multi-family building located in Poland. The analyses were based on the results of building performance co-simulation using the EnergyPlus and CONTAM programs carried out under dynamic conditions with a 5 min time step for the entire heating season. The calculations took into account the instantaneous occupancy variability of twenty apartments. In the buildings equipped with new tight windows, the natural ventilation system provided extremely low air exchange (on average 0.1 h−1) and poor indoor air quality (average CO2 concentration at the level of 2500 ppm). Opening windows to ventilate the rooms generated a multiple increase (up to 8 times) in heating demand during these periods, but average CO2 concentration was on the level of 930 ppm. The use of mechanical ventilation was profitable both in terms of energy savings (at the level of 50%) and improvement in the indoor air. [ABSTRACT FROM AUTHOR]

In this study, a controller method for window opening was developed to naturally ventilate a classroom with 30 occupants. The aim was to improve indoor environment quality and limit the probability of COVID infection risk simultaneously. The study was based on a building performance simulation using combined EnergyPlus, CONTAM, and Python programs. Seven cases with automatically opening windows were considered. Opening window parameters were optimized by genetic algorithms. It was shown that the optimized controller with indoor environment functions improved classroom ventilation and considerably decreased CO2 concentration compared to a reference case where the windows were opened only during breaks, and the controller also improved occupants' thermal comfort. However, there was a noticeable increase in energy demand, caused by the increased air change rate. Introducing the probability of infection risk function to the controller did not reduce the transmission risk substantially, and the probability of infection transmission was high for 80% of the classroom occupancy time. The risk of infection changed only when additional actions were taken, such as introducing face masks, indoor air cleaners, or reducing the number of students present in the classroom. In these cases, it was possible to prevent the infection transmission for more than 90% of the lecture time (R0 < 1). [ABSTRACT FROM AUTHOR]

In buildings with good-quality thermal insulation of external partitions, the main component of the building's heat balance is the heat demand for ventilation. The reduction of this energy demand cannot be achieved at the expense of thermal comfort of the occupants and indoor air quality. The aim of this article is to analyze the impact of various ventilation strategy (natural and mechanical) on heating demand, thermal comfort, and CO2 concentration in a single-family house located in Poland. The benefits of using fans integrated with the earth tube were tested. The study was based on the numerical energy simulation of a multi-zone building model for the entire calendar year. Contam, EnergyPlus, and Python programs were used to perform calculations. The thermal model was validated on the results of temperature measurements in the building. To obtain the best solutions, the parameters of the systems considered have been optimized with the use of genetic algorithms. Various optimal parameters of the earth tube (diameter, length, and foundation depth) were obtained during this research. The highest number of thermal discomfort hours was obtained in the naturally ventilated building with automatic window opening. This system supplied to the rooms a large amount of cool outdoor air in winter and warm air in summer, causing instantaneous rapid fluctuations in indoor temperature. Supplementing the mechanical ventilation control system with CO2 concentration sensors resulted in a much higher amount of ventilation air supplied to the rooms compared to systems controlled only by temperature sensors, resulting in an increase in heat demand. [ABSTRACT FROM AUTHOR]

Currently, more and more emphasis is being placed on reducing energy consumption in buildings to reduce greenhouse gases in the atmosphere. Building performance simulation is very useful to predict energy demand and indoor environment quality. An indispensable element of the simulation is the validation and calibration of the model, which is an arduous process. The aim of the study was to present a four-level validation (using measurement results) and calibration of a thermal model of a naturally ventilated single-family house. Numerical calculations using co-simulation between EnergyPlus and Contam were performed. The results of the one-year simulation measurements of the indoor temperature and ventilation airflows were compared. After the calibration was performed, a high convergence of the results was found. The normalized mean bias error for hourly and monthly values did not exceed 1% and the coefficient of variation of the root mean squared error was a maximum of 7% with a simultaneous high correlation of the results in the range from 0.85 to 0.89. It was found that the final results were significantly influenced by the appropriate modeling of air exchange in the building, including the opening of windows. [ABSTRACT FROM AUTHOR]