Search

Resistive wall mode control coils (RWMCs) will be installed in the vacuum vessel of JT-60SA. Since 200 °C baking of vacuum vessel on JT-60SA is performed to remove the impurity in the plasma facing components, in-vessel components must be made with heat-resistant materials such as metal and ceramic or must be cooled with water. We looked for the heat-resistant organic insulator for JT-60SA RWMC and performed the heat resistant test for several resins. However, no resin passed the test (Sukegawa et al., 2015). We again performed the heat resistant test of several organic insulator in the circumstances without air and finally found that the some Bismaleimide–Triazine (BT) resin has enough heat resistance without air. We designed the eight-turn RWMC with the BT resin. Based on this design, the specification of RWMC and power supply requirement are decided. For the design of RWMC, the finite element (FEM) analysis of electromagnetic force during disruption and thermal stress during baking and operation were performed. Manufacturing of the RWMC has already launched. [ABSTRACT FROM AUTHOR]

Minimum sets of in-vessel components were installed for initial operation of JT-60SA in order to product and control the plasma and to know the plasma basic information, including inboard first wall, upper divertor, protection limiter, glow electrodes and magnetic sensors. All of magnetic sensors were installed within the required accuracy with in-situ measurement with laser tracker. The inboard first wall and the upper divertor were installed for the limiter configuration at the plasma initiation and the divertor configuration, respectively. They have carbon tiles as the first wall, which must be installed with accuracy of ± 1 mm in order to avoid the heat concentration. However, the vacuum-vessel wall had some deformation. Therefore, we measured in advance with laser tracker the position of the vacuum vessel where the bases of the inboard first wall and upper divertor would be welded. By using these position data and 3D CAD, we customized all bases. Owing to these procedures, we could install the first wall with required accuracy. Also, all other components were installed with required accuracy. [ABSTRACT FROM AUTHOR]