Search

The missile-borne synthetic aperture radar (SAR) works in the forward-squint state, and a higher flight speed will cause a very large relative radial velocity between the target and the antenna phase center (APC). The classic polar format algorithm (PFA) and its improved version do not effectively compensate for the intra-pulse Doppler history resulting from large radial velocity, which leads to defocused images. Therefore this letter proposes a modified version of the PFA, which can solve such image defocus. Compared with the classical PFA, the modified PFA has the same advantages of simplicity and efficiency while implementing higher image quality by compensation of the residual phases caused by large radial velocity. The modified PFA is suitable for hardware implementation, since only fast Fourier transform (FFT) and complex vector multiplications are required in the range dimension processing. In this letter, simulation examples are employed to verify the validity and advantages of the modified PFA. [ABSTRACT FROM AUTHOR]

The filtered backprojection (FBP) algorithm is viewed as a preferred candidate for general bistatic synthetic aperture radar (BiSAR) imaging since it does not pose any restrictions on SAR configurations or flight paths. However, high-efficient autofocus methods such as phase gradient autofocus (PGA) or Mapdrift (MD) cannot be effectively integrated with the FBP algorithm due to the unknown properties of the BiSAR FBP imagery spectrum. In this article, a novel Fourier-based interpretation of the BiSAR FBP algorithm is presented. Based on the new viewpoint, spectral characteristics of the BiSAR FBP imagery in the wavenumber domain, including range spectral ambiguity, space-variant spectral support, and the structural 2-D phase error, are derived in detail. Using these characteristics, a computationally efficient 2-D autofocus approach is proposed. First, a preprocessing is performed to eliminate the range spectral ambiguity and to align the skewed spectrum support, which facilitates the following phase error estimation and correction. Then, an estimation of the 1-D azimuth phase error (APE) is applied by combining multiple estimation results from different subband data. Finally, the 2-D phase error is computed directly from the estimated APE by exploiting the derived analytical structure of the 2-D phase error, which is then applied to restore the BiSAR FBP image. The simulation results are presented to show the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

A 360° video synthetic aperture radar (VideoSAR) appears as an interactive observation capability to understand the dynamic scenarios. VideoSAR system mounted on an unmanned aerial vehicle (UAV) delivers a highly flexible and cost-effective approach. In this letter, the UAV-borne repeat-pass circular stripmap (CSM) VideoSAR observation is formulated in the format of video area overflown to enhance the wide-area surveillance capability. A completely two-dimensional interpolation-free polar format algorithm is employed, especially in terms of repeat-pass CSM-VideoSAR configuration. We conduct the repeat-pass CSM-VideoSAR experiments on multirotor UAV-borne system in the interests of imaging demonstration and promoting the inspirations on the related open issues. [ABSTRACT FROM AUTHOR]

An improved space-variant postfiltering approach to compensate for the wavefront curvature effect in polar format imagery is presented in this letter. The main contribution of this new method is the construction of a space-variant filter, which is based on exploiting the endomorphism property of the polar format transformation. The new approach provides an accurate and general solution to wavefront curvature compensation under arbitrary radar flight path. Finally, point target simulation has validated the effectiveness of the new approach. [ABSTRACT FROM PUBLISHER]