Search

Object detection and tracking in camera images is a fundamental technology for computer vision and is used in various applications. In particular, object tracking using high-speed cameras is expected to be applied to real-time control in robotics. Therefore, it is required to increase tracking speed and detection accuracy. Currently, however, it is difficult to achieve both of those things simultaneously. In this paper, we propose a tracking method that combines multiple methods: correlation filter-based object tracking, deep learning-based object detection, and motion detection with background subtraction. The algorithms work in parallel and assist each other's processing to improve the overall performance of the system. We named it the "Mutual Assist tracker of feature Filters and Detectors (MAFiD method)". This method aims to achieve both high-speed tracking of moving objects and high detection accuracy. Experiments were conducted to verify the detection performance and processing speed by tracking a transparent capsule moving at high speed. The results show that the tracking speed was 618 frames per second (FPS) and the accuracy was 86% for Intersection over Union (IoU). The detection latency was 3.48 ms. These experimental scores are higher than those of conventional methods, indicating that the MAFiD method achieved fast object tracking while maintaining high detection performance. This proposal will contribute to the improvement of object-tracking technology. [ABSTRACT FROM AUTHOR]

Although they have been under development for years and are attracting a lot of attention, vision-based tactile sensors still have common defects—the use of such devices to infer the direction of external forces is poorly investigated, and the operating frequency is too low for them to be applied in practical scenarios. Moreover, discussion of the deformation of elastomers used in vision-based tactile sensors remains insufficient. This research focuses on analyzing the deformation of a thin elastic layer on a vision-based tactile sensor by establishing a simplified deformation model, which is cross-validated using the finite element method. Further, this model suggests a reduction in the number of markers required by a vision-based tactile sensor. In subsequent testing, a prototype HiVTac is fabricated, and it demonstrates superior accuracy to its vision-based tactile sensor counterparts in reconstructing an external force. The average error of inferring the direction of external force is 0.32 ∘ , and the root mean squared error of inferring the magnitude of the external force is 0.0098 N. The prototype was capable of working at a sampling rate of 100 Hz and a processing frequency of 1.3 kHz, even on a general PC, allowing for real-time reconstructions of not only the direction but also the magnitude of an external force. [ABSTRACT FROM AUTHOR]

In recent years, advances in CMOS imagers and AI have rapidly expanded the application fields of image processing. Spatial resolution, sensitivity, dynamic range, etc. for devices have dramatically improved, while various recognition functions have been implemented with the introduction of learning-based information processing, making progress day by day. However, the temporal resolution or temporal dynamics of an image has been limited to the video rate level of processing, because image processing has been required to realize the functions of the human eye. In the case of processing for high-speed moving objects or controlling machine dynamics as machine eyes, rather than processing in the range visible to the human eye, high-speed vision, i.e., high-speed image processing in a bandwidth that covers the dynamics of the object, and a system that utilizes such processing, are required. This special issue summarizes such advanced research on high-speed vision, highlighting its current status and future development in the areas of devices, systems, and application developments. High-speed vision has entered a new era, as the basic technology and various applications have been developed and new functions are being added one after another. We hope that this timely special issue will help its readers grasp this major technological trend and create new system values. [ABSTRACT FROM AUTHOR]

In this research, we focused on Human-Robot collaboration. There were two goals: (1) to develop and evaluate a real-time Human-Robot collaborative system, and (2) to achieve concrete tasks such as collaborative peg-in-hole using the developed system. We proposed an algorithm for visual sensing and robot hand control to perform collaborative motion, and we analyzed the stability of the collaborative system and a so-called collaborative error caused by image processing and latency. We achieved collaborative motion using this developed system and evaluated the collaborative error on the basis of the analysis results. Moreover, we aimed to realize a collaborative peg-in-hole task that required a system with high speed and high accuracy. To achieve this goal, we analyzed the conditions required for performing the collaborative peg-in-hole task from the viewpoints of geometric, force and posture conditions. Finally, in this work, we show the experimental results and data of the collaborative peg-in-hole task, and we examine the effectiveness of our collaborative system. [ABSTRACT FROM AUTHOR]