Search

Abstract: Cross-linked chitosan was chemically modified with di-2-propanolamine via an arm of chloromethyloxirane (CCTS-DPA resin). The adsorption behavior of the resin towards 62 elements was examined using a mini-column pretreatment method, and the collected elements were eluted with 1molL−1 nitric acid before measurement by inductively coupled plasma-mass spectrometry (ICP-MS). The CCTS-DPA resin can adsorb several metal cations and several oxoanionic elements at appropriate pH. However, di-2-propanolamine (DPA) attached to cross-linked chitosan (CCTS) showed excellent ability and selectivity for the adsorption of germanium at pH 6 to 9. The adsorption capacity of the resin for germanium (IV) was found to be 106mgg−1 resin, whereas the adsorption rate constant was 9.82×10−2 min−1. Through the column treatment, alkali and alkaline earth matrices in river water and seawater matrices could be completely removed. The resin can also successfully remove chloride and selenium that can interfere with the direct determination of germanium by ICP-MS. The applicability of the CCTS-DPA resin was further demonstrated for the collection/preconcentration of germanium in environmental water samples and its determination by ICP-MS. The concentrations of germanium in tap water, river water and seawater samples were found in the range of 0.011 to 0.022μgL−1. [Copyright &y& Elsevier]

Abstract: A syringe-driven chelating column (SDCC) was applied to develop an on-line preconcentration/inductively coupled plasma mass spectrometry (ICP-MS) method for preconcentration and determination of rare earth elements (REEs) in seawater samples. The present on-line preconcentration system consists of only one pump, two valves, an SDCC, an ICP-MS, several connectors, and Teflon tubes. Optimizations of adsorption pH condition, sample loading flow rate, and integration range were carried out to achieve optimum measurement conditions for REEs in seawater sample. Six minutes was enough for a preconcentration and measurement cycle using 10mL of seawater sample, where the detection limits for different REEs were in the range of 0.005pgmL−1 to 0.09pgmL−1. Analytical results of REEs in a seawater certified reference material (CRM), NASS-5, confirmed the usefulness of the present method. Furthermore, concentrations of REEs in Nikkawa Beach coastal seawater were determined and discussed with shale normalized REE distribution pattern. [Copyright &y& Elsevier]

Abstract When iminodiacetic acid chelating-resin solid phase extraction (SPE) was used for the preconcentration of rare earth elements (REEs) in river water samples around sewage treatment plant (STP), low recovery values for heavy REEs were observed. In order to find out the reason for the low recovery, in the present paper, organic ligands in the STP effluent, which may compete with iminodiacetic acids, were analyzed by GC-NPD. It was found that EDTA was contained in the STP effluent at several-100 nM level and interfered with the adsorption of REEs, especially heavy REEs (present at pM level) on the chelating-resin due to the formation of stable complexes. Therefore, acid treatment was applied to decompose EDTA molecules. As a result of acid treatment with HNO 3 and H 2 O 2 at 170 °C for 4 h, all REEs were almost quantitatively recovered from the STP effluent with chelating-resin SPE with good reproducibility. After the acid treatment and subsequent 40-times preconcentration with SPE, all REEs in river water samples were precisely determined by ICP-MS at several-10 to sub pg mL−1 levels. Graphical abstract Image Highlights • Low recovery of rare earth elements was observed in solid phase extraction. • EDTA contained in sewage treatment plant effluent cause such adverse effect. • Acid treatment with HNO 3 and H 2 O 2 at 170 °C was effective to decompose EDTA. [ABSTRACT FROM AUTHOR]

Abstract: A method for multielement analysis of micro-volume biological sample by inductively coupled plasma mass spectrometry (ICP-MS) with a highly efficient sample introduction system was presented. The sample introduction system was the combination of (1) an inert loop injection unit and (2) a high performance concentric nebulizer (HPCN) coupled with a temperature controllable cyclone chamber. The loop injection unit could introduce 20μL samples into the carrier liquid flow of 10μLmin−1 producing a stable signal for 100s without any dilution. The injection loop is continuously washed with 0.1M HNO3 carrier solution during the measurement, thereby much improving sample throughput. The HPCN is a triple tube concentric nebulizer, which can generate fine aerosols and provide a stable and highly measurement sensitivity in ICP-MS at a liquid flow rate less than 10μLmin−1. With the combination of the chamber heating at 60°C, the sensitivity obtained with the proposed sample introduction system at the liquid flow rate of 10μLmin−1 was almost the same as that with a common concentric nebulizer and cyclone chamber system at the liquid flow rate of 1mLmin−1, though the sample consumption rate of the HPCN was two orders of the magnitude lower than that of the common nebulizer. The validation of the proposed system was performed by analyzing the NIST SRM 1577b Bovine Liver. The observed values for 12 elements such as Na, P, S, K, Ca, Mn, Fe, Co, Cu, Zn, Mo, Cd were in good agreement with their certified values and information value. Satisfactory analytical results for 14 elements such as Na, Mg, P, S, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Y, Ba in Escherichia coli sample were also obtained. The proposed sample introduction system was quite effective in the cases when only micro-volume of biological sample is available. [Copyright &y& Elsevier]

Abstract: A syringe-based sample pretreatment tool, named herein “tip-in chelating monolith”, has been developed for simple and facile solid phase microextraction (SPME) of trace elements in natural waters. The tip-in chelating monolith was directly prepared within the confines of a commercially available syringe filter tip by a two-step process: (1) in situ polymerization of a monomer solution consisting of 22.5% glycidyl methacrylate (GMA), 7.5% ethylene glycol dimethacrylate (EDMA), 35% 1-propanol, 28% 1,4-butanediol, and 7% water and (2) its subsequent modification with 1molL−1 of iminodiacetate solution (adjusted to pH 10) via ring-opening reaction of epoxide. The adsorption properties of the tip-in chelating monolith thus obtained were evaluated through an adsorption/desorption experiment, where the effects of sample solution pH and eluent on the SPME of trace metals and metalloids were systematically examined. Consequently, when sample solution pH was adjusted to 5.0 and 0.9mL of 2molL−1 nitric acid was used as an eluent, good recoveries of more than 80% were obtained for 27 elements in a single-step extraction. The proposed SPME method was validated through the analysis of two river water certified reference materials (CRMs: JSAC 0301-1 and NMIJ 7201-a). After 50-fold preconcentration (from 50mL of the original river water sample to 1.0mL of final analysis solution), 22 trace elements including Ti, Fe, Co, Ni, Cu, Ga, Cd, Sn and REEs were quantitatively determined by inductively coupled plasma mass spectrometry (ICP-MS). The analytical detection limits were in the range from 0.000003μgL−1 for Ho to 0.18μgL−1 for Fe. Good agreement of the observed values with the certified or reference values indicates that the proposed SPME using the tip-in chelating monolith is practically applicable. [Copyright &y& Elsevier]

Abstract: The multielement determination of trace metals in seawater was carried out by inductively coupled plasma mass spectrometry (ICP-MS) with aid of a down-sized chelating resin-packed minicolumn for preconcentration. The down-sized chelating resin-packed minicolumn was constructed with two syringe filters (DISMIC 13HP and Millex-LH) and an iminodiacetate chelating resin (Chelex 100, 200–400mesh), with which trace metals in 50mL of original seawater sample were concentrated into 0.50mL of 2M nitric acid, and then 100-fold preconcentration of trace metals was achieved. Then, 0.50mL analysis solution was subjected to the multielement determination by ICP-MS equipped with a MicroMist nebulizer for micro-sampling introduction. The preconcentration and elution parameters such as the sample-loading flow rate, the amount of 1M ammonium acetate for elimination of matrix elements, and the amount of 2M nitric acid for eluting trace metals were optimized to obtain good recoveries and analytical detection limits for trace metals. The analytical results for V, Mn, Co, Ni, Cu, Zn, Mo, Cd, Pb, and U in three kinds of seawater certified reference materials (CRMs; CASS-3, NASS-4, and NASS-5) agreed well with their certified values. The observed values of rare earth elements (REEs) in the above seawater CRMs were also consistent with the reference values. Therefore, the compiled reference values for the concentrations of REEs in CASS-3, NASS-4, and NASS-5 were proposed based on the observed values and reference data for REEs in these CRMs. [Copyright &y& Elsevier]

Abstract: Rare earth elements (REEs) in seawater were preconcentrated 20-fold (from 50 to 2.5ml) by a chelating resin-packed minicolumn device and determined by inductively coupled plasma mass spectrometry (ICP-MS). The recoveries for REEs were in the range from 90% for Eu and Dy to 98% for Yb, and their standard deviations were less than 4%. The lower detection limits for REEs ranged from 0.06ngl−1 for Lu to 0.5ngl−1 for Sm. The analytical results for REEs in seawater reference materials (NASS-5, CASS-3, and CASS-4), the Take Island coastal seawater, and the Ise Bay coastal seawater were evaluated as the REE distribution patterns with shale-normalization and deep seawater-normalization. Slight relative enrichments of heavy REEs were observed in the Take Island coastal seawater and the Ise Bay coastal seawater, which might be attributed to the input from the river flows containing more dissolved heavy REEs. In addition, positive anomalies of Sm were found in the normalized REE distribution patterns for NASS-5, CASS-3, and CASS-4, which would be attributed to the contamination in the preparation process of reference materials by NRC. [Copyright &y& Elsevier]

Abstract: Speciation of mercury in salmon egg cell cytoplasm was investigated by surfactant-mediated high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS), where an ODS (octadecylsilica) column coated with a bile acid derivative, CHAPS (3-[(3-cholamidopropyl)-dimethylammonio]-1-propane sulfonate), was used for species separation. Prior to the speciation analysis, total Hg in the cell cytoplasm was determined by ICP-MS at m/z 202 in a flow injection mode. For the precise measurement, salmon egg cell cytoplasm was diluted five-fold with 0.1M Tris (Tris(hydroxymethyl)aminomethane)–HNO3 buffer solution, and the standard addition method was employed. Thus, the total concentration of Hg in cell cytoplasm was estimated to be 12.4ngg−1 on the wet weight basis. Next, the cell cytoplasm diluted five-fold with 0.1M Tris–HNO3 buffer solution was analyzed by surfactant-mediated HPLC with the dual detection system of a UV absorption detector and an ICP-MS instrument. Two peaks corresponding to some proteins and small molecules were mainly observed in those chromatograms. When salmon egg cell cytoplasm was diluted five-fold with 0.01M Tris buffer solution or pure water, some precipitates appeared probably because of precipitation of hydrophobic proteins in cytoplasm. After the precipitates were eliminated with a membrane filter, the filtrate was subjected to the analysis by surfactant-mediated HPLC/UV/ICP-MS. As a result, the peaks for small molecular species of Hg were clearly observed at the retention time near 4.0min (corresponding to low-molecular weight zone) in the chromatograms with UV absorption detection as well as with Hg- and S-specific ICP-MS detections. The small molecule bound with Hg was identified as cysteine through the cysteine-spiked experiment. In addition, the protein fraction on the chromatogram obtained by using the CHAPS-coated ODS column was further analyzed by SEC (size exclusion chromatography). Consequently, several protein peaks with molecular weight of 300, 50 and 12kDa were observed in all the detections of UV absorption, Hg and Se, although two peaks among them were coincident in the case of S. These results indicate that Hg in salmon egg cell cytoplasm binds with proteins containing selenocysteine and/or cysteine residues in proteins. [Copyright &y& Elsevier]