Search

The Multi-Spectral Imager (MSI) on board the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) will provide horizontal information about aerosols and clouds. These measurements are needed to extend vertical cloud and aerosol property information, which is obtained from EarthCARE's active sensors, in order to obtain a full three-dimensional view of cloud and aerosol conditions. Mesoscale weather systems, in particular, will be characterized. The discovery of a non-compliance of the MSI visible–near-infrared–shortwave infrared (VNS) camera's visible (VIS) and shortwave infrared (SWIR1) channels regarding a spectral central wavelength (CWVL) shift across-track of up to 14 nm (VIS) and 20 nm (SWIR1) led to the need for an analysis regarding its impact on MSI Level-2A aerosol and cloud products. A significant influence of the spectral misalignment effect (SMILE) on MSI retrievals is identified due to the spectral variation in gas absorption, surface reflectance, and aerosol and cloud properties within the spectral ranges of these MSI bands. For example, the VIS channel is positioned in close proximity to the red edge of green vegetation and is impacted by residual absorption of water vapor and ozone. Small central wavelength variations introduce uncertainties due to the rapid change in surface reflectance for conditions with low optical thickness. The present central wavelength shift in the VIS towards shorter wavelengths than at nadir introduces a relative error in transmission of up to 3.3 % due to the increasing influence of water vapor and ozone absorption. We found relative errors in the top-of-atmosphere (TOA) signal due to the SMILE of up to 30 % for low optical thickness over a land surface in that band. Since the magnitude of the impact strongly depends on the underlying surface and atmospheric conditions, we conclude that accounting for the SMILE in Level-2 retrievals or correcting the Level-1 signal will improve MSI aerosol and cloud product quality. [ABSTRACT FROM AUTHOR]

The objective of the Earth Cloud, Aerosol, and Radiation Explorer (EarthCARE) mission is to infer attributes of cloud, aerosol, precipitation, and radiation from observations made by four complementary instruments. This requires the development of single-instrument and multiple-instrument (i.e. synergistic) retrieval algorithms that employ measurements made by one, or more, of EarthCARE's cloud-profiling radar (CPR), atmospheric lidar (ATLID), and multi-spectral imager (MSI); its broadband radiometer (BBR) places the retrieved quantities in the context of the surface–atmosphere radiation budget. To facilitate the development and evaluation of ESA's EarthCARE production model prior to launch, sophisticated instrument simulators were developed to produce realistic synthetic EarthCARE measurements for simulated conditions provided by cloud-resolving models. While acknowledging that the physical and radiative representations of cloud, aerosol, and precipitation in the test scenes are based on numerical models, the opportunity to perform detailed evaluations wherein the "truth" is known provides insights into the performance of EarthCARE's instruments and retrieval algorithms. This level of omniscience will not be available for the evaluation of in-flight EarthCARE retrieval products, even during validation activities coordinated with ground-based and airborne measurements. In this study, we compare EarthCARE retrieval products both statistically across all simulated scenes and from a specific time series from a single scene. For ice clouds, it is shown that retrieved profiles of ice water content and effective particle size made by the ATLID-CPR-MSI cloud, aerosols, and precipitation (ACM-CAP) synergistic algorithm are consistently more accurate than those from its single-instrument counterparts. While liquid clouds are often difficult to detect from satellite-borne sensors, especially for multi-layered clouds, ACM-CAP benefits from combined constraints from lidar backscatter, solar radiances, and radar-path-integrated attenuation but still exhibits non-trivial random error. For precipitation retrievals, the CPR cloud and precipitation product (C-CLD) and ACM-CAP have a similar performance when well-constrained by CPR measurements. The greatest differences are in coverage, with ACM-CAP reporting retrievals in the melting layer, and in heavy precipitation, where CPR signals are dominated by multiple scattering and attenuation. Aerosol retrievals from ATLID compensate for a high degree of measurement noise in a number of ways, with the ATLID extinction, backscatter, and depolarisation (A-EBD) product and ACM-CAP demonstrating similar performance. The multi-spectral imager (MSI) cloud optical properties (M-COP) product performs very well for unambiguous cloud layers. Similarly, the MSI aerosol optical thickness (M-AOT) product performs well when radiances are unaffected by cloud, but both products provide little information about vertical profiles of properties. Finally, a summary of the performance of all retrieval products and their random errors is provided. [ABSTRACT FROM AUTHOR]

The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) is the first mission that will provide measurements from active profiling, passive imaging and a broadband radiometer from a single satellite platform. The passive multi-spectral imager (MSI) features four solar and three thermal infrared channels, and has a swath of 150 km and a spatial pixel resolution of 500 m. The MSI observations will provide across-track information on clouds and aerosol to extend the active profiling information into the swath. In this paper, we present the algorithm used for retrieving the cloud optical and physical products (M-COP), specifically cloud optical thickness, effective radius and top height. The algorithm is based on the solar and terrestrial MSI channels within an optimal estimation framework. This framework enables full error propagation given by the uncertainties in measurements and a priori information. The MSI cloud algorithm has been successfully exercised on different imagers and on synthetically generated MSI observations. [ABSTRACT FROM AUTHOR]

The Multi-spectral Imager (MSI) on board the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) will provide horizontal information about aerosols and clouds. These measurements are needed to extend vertical cloud and aerosol property information, which are obtained from EarthCARE's active sensors, in order to obtain a full three dimensional view on cloud and aerosol conditions. Especially, meso-scale weather systems will be characterized. The discovery of a non-compliance of the MSI VNS camera's visible (VIS) and shortwave-infrared (SWIR1) channels regarding a spectral central wavelength (CWVL) shift across track of up to 14 nm (VIS) and 20 nm (SWIR1), led to the need for an analysis regarding its impact on MSI Level 2A aerosol and cloud products. A significant influence of the Spectral MIsaLignment Effect (SMILE) on MSI retrievals is identified due to the spectral variation of gas absorption, surface reflectance as well as aerosol and cloud properties within the spectral ranges of these MSI bands. For example, the VIS channel is positioned in close proximity to the red edge of green vegetation and is impacted by residual absorption of water vapour and ozone. Small central wavelength variations introduce uncertainties due to the rapid change in surface reflectance for conditions with low optical thickness. The present central wavelength shift in the VIS towards shorter wavelengths than at nadir introduces a relative error in transmission of up to 3.3 % due to the increasing influence of water vapour and ozone absorption. We found relative errors in the TOA signal due to the SMILE of up to 30 % for low optical thickness over a land surface in that band. Since the magnitude of the impact strongly depends on the underlying surface and atmospheric conditions, we conclude that accounting for the SMILE in Level 2 retrievals or correcting the Level 1 signal will improve MSI aerosol and cloud product quality. [ABSTRACT FROM AUTHOR]

The mission of the Earth cloud, aerosol and radiation explorer (EarthCARE) mission to observe cloud, aerosol, precipitation and radiation using four complementary instruments requires the development of many single-instrument and synergistic algorithms for the retrieval of geophysical quantities. The retrieval products employ one or more of the cloud profiling radar (CPR), atmospheric lidar (ATLID) and multispectral imager (MSI), while the broadband radiometer (BBR) places the retrieved quantities in the context of the atmospheric radiation budget. To facilitate the development and evaluation of the ESA EarthCARE production model prior to launch, sophisticated instrument simulators have been developed to produce realistic synthetic EarthCARE measurements from the output of cloud-resolving model simulations. While acknowledging that the physical and radiative representation of cloud, aerosol and precipitation in the test scenes are based on numerical models, the opportunity to perform a detailed evaluation wherein the model ''truth'' is known has provided rare insights into the performance of EarthCARE's instruments and retrieval algorithms. This level of omniscience will not be available for the evaluation of in-flight EarthCARE retrieval products, even during validation activities coordinated with ground-based and airborne measurements. In this study we intercompare EarthCARE retrieval products from within the ESA production model both statistically across all simulated EarthCARE granules, and using timeseries of data from an individual scene. The comparison between the retrieved quantities helps to illustrate the strengths and limitations of the single-instrument retrievals, and the degrees to which the synergistic retrieval and composite products can represent the entire atmosphere of clouds, aerosols and precipitation. We show that radar-lidar synergy has the greatest impact in ice clouds; when compared with single-instrument radar and lidar retrievals, the synergistic ATLID-CPR-MSI cloud, aerosols, and precipitation (ACM-CAP) product accurately retrieves profiles of both ice water content and effective radius. While liquid cloud is difficult to detect directly from spaceborne remote sensors, especially in complex and layered scenes, the synergistic retrieval benefits from combined constraints from lidar backscatter, solar radiances and radar path-integrated attenuation, but still exhibits a high degree of random error. For precipitation retrievals, the CPR cloud and precipitation product (C-CLD) and ACM-CAP have similar performance when well-constrained by CPR measurements. The greatest differences are in coverage, with ACM-CAP reporting retrievals in the melting layer, and in heavy precipitation where the radar is dominated by multiple scattering and attenuation). Aerosol retrievals from ATLID compensate for a high degree of measurement noise in a number of ways, with the ATLID extinction, backscatter and depolarization (A-EBD) product and ACM-CAP demonstrating similar performance in the test scenes. The multispectral imager (MSI) cloud optical properties (M-COP) product performs very well in unambiguous cloud layers; similarly, the MSI aerosol optical thickness (M-AOT) product performs well where the possibility of contamination by cloud signal is very low. A summary of the performance of all retrieval products is provided, and may help to inform the selection of EarthCARE data products by future users. [ABSTRACT FROM AUTHOR]

The EarthCARE (Earth Clouds, Aerosols and Radiation Explorer) satellite mission will provide new insights into aerosol–cloud–radiation interactions by means of synergistic observations of the Earth's atmosphere from a collection of active and passive remote sensing instruments, flying on a single satellite platform. The Multi-Spectral Imager (MSI) will provide visible and infrared images in the cross-track direction with a 150 km swath and a pixel sampling at 500 m. The suite of MSI cloud algorithms will deliver cloud macro- and microphysical properties complementary to the vertical profiles measured from the Atmospheric Lidar (ATLID) and the Cloud Profiling Radar (CPR) instruments. This paper provides an overview of the MSI cloud mask algorithm (M-CM) being developed to derive the cloud flag, cloud phase and cloud type products, which are essential inputs to downstream EarthCARE algorithms providing cloud optical and physical properties (M-COP) and aerosol optical properties (M-AOT). The MSI cloud mask algorithm has been applied to simulated test data from the EarthCARE end-to-end simulator and satellite data from the Moderate Resolution Imaging Spectroradiometer (MODIS) as well as from the Spinning Enhanced Visible InfraRed Imager (SEVIRI). Verification of the MSI cloud mask algorithm to the simulated test data and the official cloud products from SEVIRI and MODIS demonstrates a good performance of the algorithm. Some discrepancies are found, however, for the detection of thin cirrus clouds over bright surfaces like desert or snow. This will be improved by tuning of the thresholds once real observations are available. [ABSTRACT FROM AUTHOR]

ESA's Cloud, Aerosol and Radiation Explorer EarthCARE is the first mission which will provide measurements from active profiling, passive imaging and a broad-band radiometer from a single satellite platform. The passive multi-spectral imager (MSI) features four solar and three thermal infrared channels, and has a swath of 150 km and a spatial pixel resolution of 500 m. The MSI observations will provide across-track information on clouds and aerosol to extend the active profiling information into the swath. In this paper, we present the algorithm used for retrieving the cloud optical and physical products (M-COP), specifically cloud optical thickness, effective radius and top height. The algorithm is based on the solar and terrestrial MSI channels within an optimal estimation framework. The advantage of optimal estimation is that it enables full error propagation given by the uncertainties in measurements and a-priori information. The MSI cloud algorithm has been successfully exercised on different imagers and on synthetically generated MSI observations. [ABSTRACT FROM AUTHOR]

For understanding Arctic climate change, it is critical to quantify and address uncertainties in climate data records on clouds and radiative fluxes derived from long-term passive satellite observations. A unique set of observations collected during the PS106 expedition of the research vessel Polarstern (28 May to 16 July 2017) by the OCEANET facility, is exploited here for this purpose and compared with the CERES SYN1deg ed. 4.1 satellite remote-sensing products. Mean cloud fraction (CF) of 86.7 % for CERES SYN1deg and 76.1 % for OCEANET were found for the entire cruise. The difference of CF between both data sets is due to different spatial resolution and momentary data gaps, which are a result of technical limitations of the set of shipborne instruments. A comparison of radiative fluxes during clear-sky (CS) conditions enables radiative closure (RC) for CERES SYN1deg products by means of independent radiative transfer simulations. Several challenges were encountered to accurately represent clouds in radiative transfer under cloudy conditions, especially for ice-containing clouds and low-level stratus (LLS) clouds. During LLS conditions, the OCEANET retrievals were particularly compromised by the altitude detection limit of 155 m of the cloud radar. Radiative fluxes from CERES SYN1deg show a good agreement with ship observations, having a bias (standard deviation) of -6.0 (14.6) and 23.1 (59.3) Wm-2 for the downward longwave (LWD) and shortwave (SWD) fluxes, respectively. Based on CERES SYN1deg products, mean values of the radiation budget and the cloud radiative effect (CRE) were determined for the PS106 cruise track and the central Arctic region (70–90 ∘ N). For the period of study, the results indicate a strong influence of the SW flux in the radiation budget, which is reduced by clouds leading to a net surface CRE of -8.8 and -9.3 Wm-2 along the PS106 cruise and for the entire Arctic, respectively. The similarity of local and regional CRE supports the consideration that the PS106 cloud observations can be representative of Arctic cloudiness during early summer. [ABSTRACT FROM AUTHOR]

The modification of an existing cloud property retrieval scheme for the Spinning Enhanced Visible and Infrared Imager (SEVIRI) instrument on board the geostationary Meteosat satellites is described to utilize its high-resolution visible (HRV) channel for increasing the spatial resolution of its physical outputs. This results in products with a nadir spatial resolution of 1×1 km 2 compared to the standard 3×3 km 2 resolution offered by the narrowband channels. This improvement thus greatly reduces the resolution gap between current geostationary and polar-orbiting meteorological satellite imagers. In the first processing step, cloudiness is determined from the HRV observations by a threshold-based cloud masking algorithm. Subsequently, a linear model that links the 0.6 µ m, 0.8 µ m, and HRV reflectances provides a physical constraint to incorporate the spatial high-frequency component of the HRV observations into the retrieval of cloud optical depth. The implementation of the method is described, including the ancillary datasets used. It is demonstrated that the omission of high-frequency variations in the cloud-absorbing 1.6 µ m channel results in comparatively large uncertainties in the retrieved cloud effective radius, likely due to the mismatch in channel resolutions. A newly developed downscaling scheme for the 1.6 µ m reflectance is therefore applied to mitigate the effects of this scale mismatch. Benefits of the increased spatial resolution of the resulting SEVIRI products are demonstrated for three example applications: (i) for a convective cloud field, it is shown that significantly better agreement between the distributions of cloud optical depth retrieved from SEVIRI and from collocated MODIS observations is achieved. (ii) The temporal evolution of cloud properties for a growing convective storm at standard and HRV spatial resolutions are compared, illustrating an improved contrast in growth signatures resulting from the use of the HRV channel. (iii) An example of surface solar irradiance, determined from the retrieved cloud properties, is shown, for which the HRV channel helps to better capture the large spatiotemporal variability induced by convective clouds. These results suggest that incorporating the HRV channel into the retrieval has potential for improving Meteosat-based cloud products for several application domains. [ABSTRACT FROM AUTHOR]

The modification of an existing cloud property retrieval scheme for the Spinning Enhanced Visible and Infrared Imager (SEVIRI) instrument onboard the geostationary METEOSAT satellites is described to utilize its high -resolution visible (HRV) channel for increasing the spatial resolution of its physical outputs. This results in products with a nadir spatial resolution of 1 x 1 km2, compared to the standard 3 x 3 km2 resolution offered by the narrowband channels. This improvement thus greatly reduces the resolution gap between current geostationary and polar-orbiting meteorological satellite imagers. In the first processing step, cloudiness is determined from the HRV observations by a threshold-based cloud masking algorithm. Subsequently, a linear model that links the 0.6 µm, 0.8 µm, and HRV reflectances provides a physical constraint to incorporate the spatial high-frequency component of the HRV observations into the retrieval of cloud optical depth. The implementation of the method is described, including the ancillary datasets used. It is demonstrated that the omission of high-frequency variations in the cloud-absorbing 1.6 µm channel results in comparatively large uncertainties in the retrieved cloud effective radius, likely due to the mismatch in channel resolutions. A newly developed downscaling scheme for the 1.6 µm reflectance is therefore applied to mitigate the effects of this scale mismatch. Benefits of the increased spatial resolution of the resulting SEVIRI products are demonstrated for three example applications: (i) for a convective cloud field, it is shown that significantly better agreement between the distributions of cloud optical depth retrieved from SEVIRI and from collocated MODIS observations is achieved; (ii) the temporal evolution of cloud properties for a growing convective storm at standard and HRV spatial resolutions are compared, illustrating an improved contrast in growth signatures resulting from the use of the HRV channel; (iii) an example of surface solar irradiance, determined from the retrieved cloud properties, is shown, where the HRV channel helps to better capture the large spatio-temporal variability induced by convective clouds. These results suggest that incorporating the HRV channel in the retrieval has potential for improving METEOSAT-based cloud products for several application domains. [ABSTRACT FROM AUTHOR]