Search

Research conducted at the Belgrade Groundwater Source in Serbia has shown that significant well screen clogging processes take place under reduced oxic and initial anoxic conditions. Criteria for the prevention, or deceleration, of clogging are becoming more relevant to well ageing, compared with classical, mechanical clogging criteria and the permissible entrance velocities derived from them. The research project was later expanded to encompass other alluvial sources, which feature distinct oxic conditions. This paper presents some of the outcomes of this project, which shed light on the correlation between certain important indicators of well screen clogging (such as the redox potential and iron concentration) and the rate of increase in local hydraulic resistance at the wells. [ABSTRACT FROM AUTHOR]

From 2005 to 2009, research was conducted at the Belgrade Groundwater Source (BGWS) to investigate the process of clogging of wells with horizontal lateral screens (radial wells). The clogging process was monitored via the kinetics of the increase in hydraulic losses at the laterals. A correlation of this process with the redox potential, the iron concentration in water, and the microbial population growth at the laterals and in their immediate vicinity was established. Research outcomes are presented here from a study of five wells where laterals were replaced between 2006 and 2008. Derived dependencies were later used to define the preferred approach to the installation and maintenance of well laterals at the BGWS. Results contribute to the study of well ageing caused by biochemical clogging. [ABSTRACT FROM AUTHOR]

Over time, the radial collector wells of the Belgrade Groundwater Source, located in the alluvial sediments of the Sava River, exhibit a decline in discharge and a reduction in operating efficiency due to well ageing. An increase in hydraulic losses at the lateral screens, due to chemical and biochemical clogging, has been identified as the primary cause. Certain hydrogeological, hydrochemical and microbiological parameters reflect the well-ageing process and can, therefore, be considered as its indicators. An indicator-based determination of scale is an important aspect in the selection of appropriate well locations, structural characteristics, and maintenance approaches. Well ageing was studied over a period of 5 years (2005-2009). The objective was to investigate the causes of well ageing. The correlations established between the groundwater redox potential, the total iron concentration in groundwater, the grain-size distribution of the aquifer, and well discharge, are presented in the paper. [ABSTRACT FROM AUTHOR]

Water wells play an increasingly important role in providing water for the civilian population all over the world. Like other engineering structures, wells are subject to ageing processes resulting in degradation, which is observed as a reduction in hydraulic efficiency throughout their lifespan. To date, it has been found that the ageing process of a well is determined by a number of factors. The mathematical description of this process can be simplified. Drawing on Jacob's equation, this paper presents the course of the degradation process as a variable depending on operation time, well loss and flow rate. To apply the determined relationships in practice, simplifying assumptions were adopted, which make it possible to determine the moment of ageing compensations of the degradation processes. It was also demonstrated that the degradation process may be slowed down by the appropriate selection of initial operating parameters. The presented discussion highlights the significance of parameters α, δ and exponent β. The relation between hydraulic resistances in an aquifer and in the engineering structure is closely connected with these values. The presented arguments indicate that step drawdown tests provide the necessary information which allows tracking changes in the ageing processes occurring in the engineering structure. The analysis of the drawdown test results makes it possible to determine the moment when the necessary adjustments in the operating parameters of a water well should be performed. Eventually, it allows maintaining the high hydraulic efficiency of the intake and extending the lifespan of the well in accordance with the principle of sustainability. [ABSTRACT FROM AUTHOR]