Search

A series of Pd-Ag mixed-metal nanocatalysts were prepared by reduction of Pd-Ag salts in the presence of poly(propylene imine) dendrimers, which were covalently bound to the surface of a silica polyamine composite, BP-1 (polyallylamine covalently bound to a silanized amorphous silica gel). Three different Pd-to-Ag ratios were evaluated (50:50, catalyst 1; 40:60, catalyst 2; 60:40, catalyst 3) with the goal of determining how the amount of Ag effects selectivity, rate and conversion in the selective , such as phenylacetylene and 1- or 4-octyne, to the corresponding alkenes. Conditions for the are reported where there is improved selectivity without a serious reduction in rate when compared with the analogous Pd-only catalysts. Catalyst 2 worked best for phenylacetylene and catalyst 3 worked best for the octynes. The catalysts could be reused seven times without loss of activity. Copyright © 2015 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Novel catalysts consisting of ruthenium nanoparticles encapsulated in cross-linked matrices based on the poly(propylene imine) dendrimers of the 1st and 3rd generations have been synthesized with a narrow particle size distribution (3.8 and 1.0 nm, respectively). The resulting materials showed high activity for the hydrogenation of phenols in aqueous media (specific catalytic activity reached turnover frequencies of 2975 h−1 with respect to hydrogen uptake). It has been shown that the use of water as a solvent leads to a 1.5 to 50-fold increase in the reaction rate depending upon the nature of the substrate. It has been established that unlike the traditional heterogeneous catalysts based on ruthenium, during the hydrogenation of dihydroxybenzenes, the hydrogenation rate decreases in the order: resorcinol>hydroquinone≫catechol. The maximum specific activity for resorcinol was a turnover frequency of 243150 h−1 with respect to hydrogen uptake. The catalyst based on the dendrimer of the 3rd generation containing finer particles has significantly inferior activity to the catalyst based on the dendrimer of the 1st generation by virtue of steric factors, as well as the need for prereduction of the ruthenium oxide contained on the surface. These catalysts showed resistance to metal leaching and may be reused several times without loss of activity. [ABSTRACT FROM AUTHOR]

In this report, poly[acrylic acid] gels containing Al 2 O 3 were prepared by simultaneous free-radical polymerization and sol–gel chemistry using different amounts of 3-(trimethoxysilyl)propyl methacrylate (TMPM) as a compatibilizer. The hybrid materials were used as supports for a rhodium catalyst in the chemoselective hydrogenation of 3-substituted aromatic nitro-compounds. The supported rhodium catalyst was prepared by an ion-exchange process. In situ H 2 flux was used to produce active species of the catalysts. The resulting materials were characterized by infrared spectroscopy, thermogravimetric analysis, solid-state 29 Si and 13 C NMR, X-ray diffraction, transmission/scanning electron microscopy, and X-ray photoelectron spectroscopy. All materials exhibited simultaneous interpenetrating hybrid network structures (SIHNs). The morphologies and physicochemical properties depended on the amount of TMPM used. The catalysts were found to be effective for the reduction of nitrobenzene in ethanol at room temperature and a hydrogen pressure of 20 atm. The most active and selective catalyst was used in the hydrogenation of different 3-substituted aromatic nitro-compounds. The hydrogenation reactions displayed high conversion levels and promoted exclusive –NO 2 group reduction, resulting in the sole formation of the corresponding amino-compound, with the exception of 1,3-dinitrobenzene, in which over-hydrogenation was detected. The presence of electron-donating/electron-withdrawing substituents at the 3-position resulted in different rates of –NO 2 group hydrogenation. This effect was quantified in terms of the Hammett relationship, in which the catalyst displayed a linear correlation between the substituent constant ( σ i ) and the hydrogenation rate, with the exception of –OH, –NH 2 , and –OCH 3 groups. One explanation for this behavior is a proposed support-substrate hydrogen bond interaction during the catalytic reaction. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel Rh-containing non-phosphorous supported catalysts for tandem hydroformylation-hydrogenation were obtained. • Tertiary nitrogen atoms of the polymer anchored on material's surface promote aldehyde hydrogenation over Rh active centers. • Catalysts showed high activity (hydroformylation TOF 206 h−1) and chemoselectivity. • Catalyst K N performed stable hydroformylation yield at least in the first 5 cycles with a decrease in alcohol selectivity. Non-phosphorous rhodium-containing catalysts for direct conversion of olefins to alcohols via tandem hydroformylation/hydrogenation have been designed and synthesized. Interaction between Rh(acac)(CO) 2 and tertiary amino groups on the surface of mesoporous hybrid organic-inorganic supports yielded materials which were successfully used in the tandem process. Data obtained for a selected catalyst K N demonstrate that rhodium is in the Rh+1 state highly dispersed on the surface and is bonded with nitrogen atoms both before and after use. Evaluation of the catalytic performance shows high activity (hydroformylation TOF 312 h−1), chemoselectivity and stable hydroformylation yield at least in the first 5 cycles with a decrease in alcohol selectivity. The influence of temperature, reaction time, total pressure, and molar CO/H 2 ratio of syngas on oxygenate yields is described. Type of the hydroformylation active sites and possible pathways for the observed decrease in hydrogenation are discussed. [ABSTRACT FROM AUTHOR]