Search

Abstract Sludge gasification for the production of hydrogen-rich gas is a promising technology. In this paper, a pilot study on the hydrogen-rich gas production by sludge gasification using waste heat of blast furnace slag was carried out, and the mass and energy balance of gasification process using waste heat from blast furnace slag were evaluated. The results show that the higher the gasification temperature, the higher the hydrogen content in the gas. When the gasification temperature reaches 880 °C, the hydrogen content in the gas reaches the maximum,35.3%. The technology of sludge gasification combined with waste heat recovery of high furnace slag is feasible. Its efficiency of heat recovery can reach up to 64.35%, and the gasification efficiency and energy consumption ratio can reach to 42.30% and 3.67, respectively. Highlights • The sensible heat of molten slag was converted into hydrogen-rich gas gas. • A study on the sludge gasification using waste heat of BF slag was conducted. • The mass and energy balance of gasification were evaluated. [ABSTRACT FROM AUTHOR]

Abstract: The catalytic steam gasification of biomass was carried out in a lab-scale fixed bed reactor in order to evaluate the effects of particle size at different bed temperatures on the gasification performance. The bed temperature was varied from 600 to 900°C and the biomass was separated into five different size fractions (below 0.075mm, 0.075–0.15mm, 0.15–0.3mm, 0.3–0.6mm and 0.6–1.2mm). The results show that with decreasing particle size, the dry gas yield, carbon conversion efficiency and H2 yield increased, and the content of char and tar decreased. And the differences due to particle sizes in gasification performance practically disappear as the higher temperature bound is approached. Hydrogen and carbon monoxide contents in the produced gas increase with decreasing particle size at 900°C, reaching to 51.2% and 22.4%, respectively. [Copyright &y& Elsevier]

Abstract: NiO on modified dolomite (NiO/MD) catalysts were developed for hydrogen-rich gas production from steam gasification of municipal solid waste (MSW). The catalysts were prepared through deposition-precipitation method and characterized by various characterization methods. The activity of NiO/MD on the steam gasification of MSW was investigated in a lab-scale fixed bed. The results indicated that the catalysts could significantly eliminate the tar in the gas production and increase the hydrogen yield. In addition, higher temperature contributed to higher hydrogen production and gas yield, meanwhile, the optimal ratio of steam to MSW (S/M) was found to be 1.23. In the experimental conditions, the NiO/MD catalysts showed a good performance over a long lifetime test. [Copyright &y& Elsevier]

Abstract: The catalytic steam gasification of biomass was carried out in a lab-scale fixed bed reactor in order to evaluate the effects of temperatures and the ratio of steam to biomass (S/B) on the gasification performance. The bed temperature was varied from 600 to 900 and the S/B from 0 to 2.80. The results show that higher temperature contributes to more hydrogen production. The introduction of steam improves the dry gas yield and carbon conversion efficiency. But excessive steam will lower hydrogen content and degrade fuel gas quality. As S/B are 2.10, the hydrogen content reach the maximum, up to 52.7%. [Copyright &y& Elsevier]

Abstract: In the present study the catalytic steam gasification of MSW to produce hydrogen-rich gas or syngas (H2 +CO) with calcined dolomite as a catalyst in a bench-scale downstream fixed bed reactor was investigated. The influence of the catalyst and reactor temperature on yield and product composition was studied at the temperature range of 750–950°C, with a steam to MSW ratio of 0.77, for weight hourly space velocity of 1.29h−1. Over the ranges of experimental conditions examined, calcined dolomite revealed better catalytic performance, at the presence of steam, tar was completely decomposed as temperature increases from 850 to 950°C. Higher temperature resulted in more H2 and CO production, higher carbon conversion efficiency and dry gas yield. The highest H2 content of 53.29mol%, and the highest H2 yield of 38.60mol H2/kg MSW were observed at the highest temperature level of 950°C, while, the maximum H2 yield potential reached 70.14mol H2/kg dry MSW at 900°C. Syngas produced by catalytic steam gasification of MSW varied in the range of 36.35–70.21mol%. The char had a highest ash content of 84.01% at 950°C, and negligible hydrogen, nitrogen and sulphur contents. [Copyright &y& Elsevier]