Search

Redox non-innocent ligands hold the potential to expand the redox chemistry and activity of transition metal catalysts. The impact of the additional redox chemistry of phenol ligands in oxidation catalysis is explored here in the complex μ-oxido-diiron(III) polypyridyl (1) [(L)Fe(III)(μ-O)Fe(III)(L)](ClO 4 ) 2 (where HL is 2-(((di(pyridin-2-yl)methyl) (pyridin-2-ylmethyl) amino)methyl)phenol) and its tert-butyl substituted analog 2, in which each of the Fe(III) centers is coordinated to a phenolato moiety of the ligand. Complex 1 was shown earlier to catalyse the oxidation of benzyl alcohols to aldehydes with H 2 O 2 . In particular acid was found to accelerate the reactions by removal of a lag period before catalysis initiated. Here, we use reaction monitoring with resonance Raman, UV/vis absorption and EPR spectroscopy to show that under catalytic conditions, i.e. with excess H 2 O 2 , rapid (< 5 s) loss of the phenolato moiety occurs, resulting in the formation of an N4 ligated Fe(III) complex. This N4 coordinated complex forms a Fe(III)-OOH species, which is responsible for alcohol oxidation and over time a relatively stable oxido-bridged dinuclear Fe(III) complex forms as a resting state in the catalytic system. The main role of acid in the catalysis is shown to be to facilitate the initial coordination of H 2 O 2 by driving the formation of mononuclear complexes from 1 and 2. The data show that although the phenolato moiety imparts interesting redox properties on complex 1, it does not contribute directly to the oxidation catalysis observed with H 2 O 2 ., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Wesley Browne reports financial support was provided by European Research Council. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

The formation of an Fe(III)-OOH species by reaction of complex 1 ([(MeN3Py)Fe(II)(CH3CN)2](2+)) with H2O2 at room temperature is reported and is studied by a combination of UV/vis absorption, EPR, and resonance Raman spectroscopies. The formation of the Fe(III)-OOH species, and its subsequent conversion to relatively inert Fe(III)-O-Fe(III) species, is shown to be highly dependent on the concentration of water, with excess water favoring the formation of the latter species, which is studied by UV/vis absorption spectroelectrochemistry also. The presence of acetic acid increases the rate and extent of oxidation of 1 to its iron(III) state and inhibits the wasteful decomposition of H2O2 but does not affect significantly the spectroscopic properties of the Fe(III)-OOH species formed.

The aqueous and non-aqueous chemistry of the complex [Mn2(III,IV)(μ-CH3COO)(μ-O)2(Me4dtne)](PF6)2 (where Me4dtne = 1,2-bis(4,7-dimethyl-1,4,7-triazacyclonon-1-yl)ethane), which has been demonstrated as an exceptionally active catalyst in the bleaching of raw cotton and especially wood pulp at high pH (>11), is explored by UV/vis absorption, Raman and EPR spectroscopies and cyclic voltammetry. The data indicate that dissociation of the μ-acetato bridge is essential to the catalyst activity and rationalises the effect of sequestrants such as DTPA on its performance.

The spectroscopic characterisation of the (μ-1,2-peroxido)diiron(iii) species formed transiently upon reaction of [Fe(ii)(NN)3](2+) complexes with H2O2 by UV/vis absorption and resonance Raman spectroscopy is reported. The intermediacy of such species in the disproportionation of H2O2 is demonstrated.

An efficient and simple method for selective oxidation of secondary alcohols and oxidation of alkanes to ketones is reported. An in situ prepared catalyst is employed based on manganese(II) salts, pyridine-2-carboxylic acid, and butanedione, which provides good-to-excellent conversions and yields with high turnover numbers (up to 10 000) with H2 O2 as oxidant at ambient temperatures. In substrates bearing multiple alcohol groups, secondary alcohols are converted to ketones selectively and, in general, benzyl C-H oxidation proceeds in preference to aliphatic C-H oxidation., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The development of new catalytic systems for cis-dihydroxylation and epoxidation of alkenes, based on atom economic and environmentally friendly concepts, is a major contemporary challenge. In recent years, several systems based on manganese catalysts using H(2)O(2) as the terminal oxidant have been developed. In this review, selected homogeneous manganese catalytic systems, including 'ligand free' and pyridyl amine ligand based systems, that have been applied to alkene oxidation will be discussed with a strong focus on the mechanistic studies that have been carried out.

A practical method for the multigram scale selective cis-dihydroxylation of electron deficient alkenes such as diethyl fumarate and N-alkyl and N-aryl-maleimides using H(2)O(2) is described. High turnovers (>1000) can be achieved with this efficient manganese based catalyst system, prepared in situ from a manganese salt, pyridine-2-carboxylic acid, a ketone and a base, under ambient conditions. Under optimized conditions, for diethyl fumarate at least 1000 turnovers could be achieved with only 1.5 equiv. of H(2)O(2) with d/l-diethyl tartrate (cis-diol product) as the sole product. For electron rich alkenes, such as cis-cyclooctene, this catalyst provides for efficient epoxidation.

The role played by the additives salicylic acid, L-ascorbic acid and oxalic acid in promoting the catalytic activity of [MnIV2(O)3(tmtacn)2](PF6)2 (1(PF6)2, where tmtacn = N,N',N''-trimethyl-1,4,7-triazacyclononane) in the epoxidation and cis-dihydroxylation of alkenes with H2O2 and in suppressing the catalysed decomposition of H2O2 is examined. Whereas aliphatic and aromatic carboxylic acids effect enhancement of the catalytic activity of 1 through the in situ formation dinuclear carboxylato bridged complexes of the type [MnIII2(mu-O)(mu-RCO2)2(tmtacn)2]2+, for L-ascorbic acid and oxalic acid notable differences in reactivity are observed. Although for L-ascorbic acid key differences in the spectroscopic properties of the reaction mixtures are observed compared with carboxylic acids, the involvement of carboxylic acids formed in situ is apparent. For oxalic acid the situation is more complex with two distinct catalyst systems in operation; the first, which engages in epoxidation only, is dominant until the oxalic acid additive is consumed completely at which point carboxylic acids formed in situ take on the role of additives to form a second distinct catalyst system, i.e. that which was observed for alkyl and aromatic carboxylic acids, which yield both cis-diol and epoxide products.

High turnover enantioselective alkene cis-dihydroxylation is achieved with H(2)O(2) catalysed by manganese based complexes containing chiral carboxylato ligands.

In the presence of carboxylic acids the complex [Mn(IV)2(micro-O)3(tmtacn)2]2+ (1, where tmtacn = N,N',N''-trimethyl-1,4,7-triazacyclononane) is shown to be highly efficient in catalyzing the oxidation of alkenes to the corresponding cis-diol and epoxide with H2O2 as terminal oxidant. The selectivity of the catalytic system with respect to (w.r.t.) either cis-dihydroxylation or epoxidation of alkenes is shown to be dependent on the carboxylic acid employed. High turnover numbers (t.o.n. > 2000) can be achieved especially w.r.t. cis-dihydroxylation for which the use of 2,6-dichlorobenzoic acid allows for the highest t.o.n. reported thus far for cis-dihydroxylation of alkenes catalyzed by a first-row transition metal and high efficiency w.r.t. the terminal oxidant (H2O2). The high activity and selectivity is due to the in situ formation of bis(micro-carboxylato)-bridged dinuclear manganese(III) complexes. Tuning of the activity of the catalyst by variation in the carboxylate ligands is dependent on both the electron-withdrawing nature of the ligand and on steric effects. By contrast, the cis-diol/epoxide selectivity is dominated by steric factors. The role of solvent, catalyst oxidation state, H2O, and carboxylic acid concentration and the nature of the carboxylic acid employed on both the activity and the selectivity of the catalysis are explored together with speciation analysis and isotope labeling studies. The results confirm that the complexes of the type [Mn2(micro-O)(micro-R-CO2)2(tmtacn)2]2+, which show remarkable redox and solvent-dependent coordination chemistry, are the resting state of the catalytic system and that they retain a dinuclear structure throughout the catalytic cycle. The mechanistic understanding obtained from these studies holds considerable implications for both homogeneous manganese oxidation catalysis and in understanding related biological systems such as dinuclear catalase and arginase enzymes.

The syntheses and spectroscopic characterization of two 1,2,4-triazole-based oxovanadium(V) complexes are reported: 1- [VO2L1]- and 2 [(VOL2)2(OMe)2] (where H2L1 = 3-(2'-hydroxyphenyl)-5-(pyridin-2' '-yl)-1H-1,2,4-triazole, H3L2 = bis-3,5-(2'-hydroxyphenyl)-1H-1,2,4-triazole). The ligand environment (N,N,O vs O,N,O) is found to have a profound influence on the properties and reactivity of the complexes formed. The presence of the triazolato ligand allows for pH tuning of the spectroscopic and electrochemical properties, as well as the interaction and stability of the complexes in the presence of hydrogen peroxide. The vanadium(IV) oxidation states were generated electrochemically and characterized by UV-vis and EPR spectroscopies. For 2, under acidic conditions, rapid exchange of the methoxide ligands with solvent [in particular, in the vanadium(IV) redox state] was observed.