Search

Rotary engine generally sustains poor fuel economy and emissions performance at idle condition. Hydrogen has excellent physicochemical properties that can serve as an enhancer to improve the performance of the original engine. In this paper, a modified rotary engine equipped with dual fuel (hydrogen and n-butanol) port injection system and electronic ignition module was developed to explore the influence of hydrogen supplement on enhancing the idle performance of n-butanol rotary engine. In this study, the engine was run at the idle and stoichiometric with the original spark timing. Hydrogen volume percentage in the total intake was gradually increased from 0% to 7.9% by adjusting the fuel flow rate of n-butanol. The experimental results indicated that the engine instability and fuel energy flow rate were both reduced by enlarging the hydrogen supplying level. Combustion periods were shortened thanks to the enrichment of hydrogen. The peak chamber temperature was heightened as hydrogen fraction increased due to the improved combustion. HC and CO emissions were severally reduced by 50.4% and 85.8% when the hydrogen volume percentage was raised from 0% to 7.9%. However, NOx emissions were mildly increased because of the raised chamber temperature by increasing hydrogen fraction. [ABSTRACT FROM AUTHOR]

The present paper introduced an experiment survey focusing on exploring the impact of hydrogen enrichment on improving the lean-burn performance of an n-butanol rotary engine. During the test, the engine speed and intake pressure were roughly set at 4000 rpm and 35 kPa, respectively. A constant spark advance of 45 °CA was adopted through the test. Hydrogen volumetric fraction of the total intake was severally kept at 0% and 3%. The testing results manifested that the brake thermal efficiency and peak chamber temperature were heightened with hydrogen addition. Besides, the ignition delay and rapid combustion duration were both reduced with the hydrogen additive. Engine running stability gained an improvement by hydrogen supplement. Moreover, HC and CO emissions from the original n-butanol rotary engine were reduced after hydrogen adding. NOx emissions were increased with hydrogen enrichment while reduced with the increase of excess air ratio. This indicated that NOx emissions from both the n-butanol and hydrogen-blended n-butanol rotary engines could be reduced by lean combustion strategies. [ABSTRACT FROM AUTHOR]

Rotary engine has flat chamber and longs for fuel with high flame speed and small quenching distance. Hydrogen has many excellent characteristics that are suitable for the rotary engine. In this paper, the performance of a rotary engine fueled with pure hydrogen at different excess air ratios was experimentally investigated. The investigation was carried out on a single-rotor hydrogen-fueled rotary engine equipped with port fuel injection system. An online electronic control module was used to govern the hydrogen injection duration and excess air ratio. In this study, the engine was operating at the idle speed of 3000 rpm and different excess air ratios varied from 0.993 to 1.283. The test results demonstrated that the fuel energy flow rate of the hydrogen rotary engine and engine stability were reduced with the increase of excess air ratio. When the excess air ratio increased from 0.993 to 1.283, the hydrogen energy flow rate was decreased from 14.91 to 11.55 MJ/h. Both the flame development and propagation periods were increased with excess air ratio. CO emission was negligible, but HC, CO 2 and NOx emissions were still detected due to the evaporation and possible burning of the lubrication-used gasoline, and oxidation reaction of nitrogen of the intake air. [ABSTRACT FROM AUTHOR]

The combustion process within the cylinder directly influences the thermal efficiency and performance of the engines. As for the rotary engine, the long-narrow combustion chamber prevents the mixture from fully burning, which worsens the performance of the rotary engine. As a fuel with excellent properties, hydrogen can improve the combustion of the original engine. In this paper, improvements in combustion of a gasoline rotary engine by hydrogen supplement under different operating conditions were experimentally investigated. The experiment was conducted on a modified hydrogen-gasoline dual-fuel rotary engine equipped with an electronically-controlled fuel injection system. An electronic control module was specially made to command the fuel injection, excess air ratio and hydrogen volumetric fraction. Integral heat release fraction (IHRF) was employed to evaluate the combustion of the tested engine. The tested engine was first run at the idle speed of 2400 rpm and then operated at 4500 rpm to investigate the combustion of the hydrogen-blended gasoline rotary engine under different hydrogen volume fractions, excess air ratios and spark timings. The testing results demonstrated that the combustion of the gasoline rotary engine were all improved when the hydrogen was blended into the chamber under all tested conditions. [ABSTRACT FROM AUTHOR]

In this paper, a rotary engine equipped with an n-butanol and hydrogen port-injection system was developed to investigate the combustion and emissions characteristics of a hydrogen-blended n-butanol rotary engine at part load and stoichiometric conditions. A self-developed hybrid electronic control unit was adopted to adjust the injection durations of n-butanol and hydrogen. The rotary engine was run under the conditions of 4000 rpm, a manifold absolute pressure of 35 kPa and a fixed spark timing of 45 °CA before the top dead center during the whole testing operation. The hydrogen volumetric fraction in the total intake was varied from 0% to 6.30%. The test results manifested that the brake thermal efficiency and chamber temperature were simultaneously increased with hydrogen addition. The hydrogen supplement obviously shortened flame development and propagation periods. Both chamber pressure integral heat release fraction versus crank angle were increased when the hydrogen fraction was enhanced. HC emissions were reduced by 54.5% when hydrogen volume fraction was raised from 0% to 6.30%, CO and CO 2 emissions were also reduced after increasing hydrogen blending fraction. NOx emissions were mildly elevated due to the improved chamber temperature. [ABSTRACT FROM AUTHOR]

In the present paper, the cyclic variations of a hydrogen-blended gasoline rotary engine operated under various conditions were experimentally investigated. The experiments were carried out on a modified hydrogen-gasoline dual-fuel rotary engine equipped with an electronically-controlled fuel injection system. An electronic control module was specially made to command the fuel injection, excess air ratio and hydrogen volumetric fraction. The tested engine was first run at idle condition with a speed of 2400 rpm and then operated at 4500 rpm to investigate the cyclic variations of a hydrogen-enriched gasoline rotary engine under different hydrogen volumetric percentages in the total intake, excess air ratios and spark timings. The experimental results demonstrated that the coefficient of variations (in peak pressure, engine speed, flame development period and flame propagation period) of the gasoline rotary engine were distinctly decreased with the increase of hydrogen volume fraction under all the tested conditions. In particular, at idle and stoichiometric conditions, the coefficient of variation in CA0-10 and CA10-90 were reduced from 9.25% to 5.01%, 15.40% to 8.70%, respectively. [ABSTRACT FROM AUTHOR]

This paper presented an experimental study about the idle performance of a rotary engine fueled with hydrogen and gasoline blends. The idle speed was reduced from original 2400 to 2300 and 2200 rpm, and hydrogen energy percentage ( β H2 ) was varied from 0% to 35.0%. Test results showed that cyclic variation was raised with the decrease of idle speed whereas reduced with the increase of β H2 . Both decreasing idle speed and increasing β H2 were effective on reducing engine fuel consumption. Total fuel energy flow rate was effectively dropped from 22.4 MJ/h under “2400 rpm and β H2 = 0%” to 20.01 MJ/h under “2200 rpm and β H2 = 35.0%”. Combustion duration was reduced through increasing β H2 . HC and CO emissions were dropped with the increase of β H2 , but increased after reducing idle speed. CO 2 emission was decreased after reducing idle speed and adding hydrogen. [ABSTRACT FROM AUTHOR]

Because of the unusual structure chamber compared with traditional engines, gasoline rotary engine always encounters partial burning and increased noxious emissions at the idle. Hydrogen-addition could enhance the characteristics of combustion and emissions of sparked-ignited engines at idle. A modified gasoline rotary engine with electronic spark control and fuel (gasoline and hydrogen) port-injection system was developed to study the impact of hydrogen-addition on idle performance of a gasoline rotary engine. A hybrid electronic control unit was invented to manage the spark, fuel injection, hydrogen volume fraction of the total intake and overall excess air ratio. In this study, the engine was operating at the idle speed of 2400 rpm and stoichiometric conditions. The hydrogen volume fraction was gradually varied from 0% to 6.8%. Results showed that the coefficient of variation in speed and fuel energy flow rate were both decreased after the hydrogen-addition. Flame development and propagation periods were shortened owning to hydrogen-addition. The peak chamber temperature was enhanced after the hydrogen-addition due to the high adiabatic flame temperature of hydrogen. Cooling loss was dropped when hydrogen was added into gasoline. HC, CO and CO 2 emissions were reduced by 79.4%, 86.0% and 25.9% when hydrogen volume fraction were raised from 0% to 6.8%. [ABSTRACT FROM AUTHOR]

Hydrogen-fueled Wankel rotary engine, with few available research currently, has excellent power and emission characteristics, however, with lower efficiency. With increasing attention to low-carbon emission, it is of great significance to explore methods to improve the efficiency of hydrogen-fueled Wankel rotary engines. This work aims to study the effect of qualitative control coupling variable engine speeds at the wide-open throttle on the power control. The comparative effect of qualitative control coupling engine speeds from 1000 r/min to 1500 r/min under the wide-open throttle and quantitative control at 1500 r/min on the combustion and emission characteristic of hydrogen-fueled Wankel rotary engine is investigated. The results show that compared with quantitative control, qualitative control coupling variable engine speed can achieve excellent performance. The brake thermal efficiency can be maximally increased by 43.5%, an absolute increase of 6.22%, as well the volumetric efficiency with a maximal 105% improvement. The thermal load and risk of knock can be greatly reduced. Moreover, NO emission also can be reduced by more than an order of magnitude or even by zero. Although there is an increase in cyclic variation, the value is no more than 4%. In addition, qualitative control coupling variable engine speed allows flexible matching of appropriate engine speed and excess air ratio based on the actual requirements of efficiency, stability, durability and emission. • The power control method of the hydrogen Wankel rotary engine is investigated. • Qualitative control achieves better engine performance than quantitative control. • Qualitative control coupling engine speed meets the power and high-efficiency demand. • Lower thermal load, knock tendency and NO emission can be obtained. • Much high excess air ratio isn't recommended due to high cyclic variation. [ABSTRACT FROM AUTHOR]

Hydrogen-fueled Wankel rotary engine, with few available research currently, has excellent power and emission characteristics, however, with lower efficiency. With increasing attention to low-carbon emission, it is of great significance to explore methods to improve the efficiency of hydrogen-fueled Wankel rotary engines. This work aims to study the effect of qualitative control coupling variable engine speeds at the wide-open throttle on the power control. The comparative effect of qualitative control coupling engine speeds from 1000 r/min to 1500 r/min under the wide-open throttle and quantitative control at 1500 r/min on the combustion and emission characteristic of hydrogen-fueled Wankel rotary engine is investigated. The results show that compared with quantitative control, qualitative control coupling variable engine speed can achieve excellent performance. The brake thermal efficiency can be maximally increased by 43.5%, an absolute increase of 6.22%, as well the volumetric efficiency with a maximal 105% improvement. The thermal load and risk of knock can be greatly reduced. Moreover, NO emission also can be reduced by more than an order of magnitude or even by zero. Although there is an increase in cyclic variation, the value is no more than 4%. In addition, qualitative control coupling variable engine speed allows flexible matching of appropriate engine speed and excess air ratio based on the actual requirements of efficiency, stability, durability and emission. • The power control method of the hydrogen Wankel rotary engine is investigated. • Qualitative control achieves better engine performance than quantitative control. • Qualitative control coupling engine speed meets the power and high-efficiency demand. • Lower thermal load, knock tendency and NO emission can be obtained. • Much high excess air ratio isn't recommended due to high cyclic variation. [ABSTRACT FROM AUTHOR]

Abstract In this paper, the effects of excess air ratios (λ) on nitric oxide (NOx) emissions of a hydrogen-fueled spark ignition engine in the cold start period are studied. Cold start characteristics of hydrogen-fueled engine were investigated experimentally. The study was performed under different λ. The experimental results showed that, when λ declined from 1.6 to 0.7, the peak engine speed within the first 6 s increased and in-cylinder pressure in the first cycle raised firstly then decreased slightly while the flame development and propagation periods shortened, and the exhaust temperature at the 6th s raised from 329 K to 355 K. In addition, NOx emissions obviously decreased, whereas hydrocarbon (HC) and carbon monoxide (CO) emissions caused by the evaporated lubricant oil increased by decreasing λ within the first 6 s. Highlights • A hydrogen-fueled engine with low emissions in the cold start was realized. • Engine combustion and emission performances have been studied in this paper. • The flame development and propagation periods were shortened. • NOx emissions were decreased, HC and CO emissions were increased. [ABSTRACT FROM AUTHOR]