Search

Dark fermentative hydrogen production from glucose by a thermophilic culture (33HL), enriched from an Icelandic hot spring sediment sample, was studied in two continuous-flow, completely stirred tank reactors (CSTR1, CSTR2) and in one semi-continuous, anaerobic sequencing batch reactor (ASBR) at 58 degrees C. The 33HL produced H2 yield (HY) of up to 3.2 mol-H2/mol-glucose along with acetate in batch assay. In the CSTR1 with 33HL inoculum, H2 production was unstable. In the ASBR, maintained with 33HL, the H2 production enhanced after the addition of 6 mg/L of FeSO4 x H2O resulting in HY up to 2.51 mol-H2/mol-glucose (H2 production rate (HPR) of 7.85 mmol/h/L). The H2 production increase was associated with an increase in butyrate production. In the CSTR2, with ASBR inoculum and FeSO4 supplementation, stable, high-rate H2 production was obtained with HPR up to 45.8 mmol/h/L (1.1 L/h/L) and HY of 1.54 mol-H2/mol-glucose. The 33HL batch enrichment was dominated by bacterial strains closely affiliated with Thermobrachium celere (99.8-100%). T. celere affiliated strains, however, did not thrive in the three open system bioreactors. Instead, Thermoanaerobacterium aotearoense (98.5-99.6%) affiliated strains, producing H2 along with butyrate and acetate, dominated the reactor cultures. This culture had higher H2 production efficiency (HY and specific HPR) than reported for mesophilic mixed cultures. Further, the thermophilic culture readily formed granules in CSTR and ASBR systems. In summary, the thermophilic culture as characterized by high H2 production efficiency and ready granulation is considered very promising for H2 fermentation from carbohydrates.

A novel continuously stirred anaerobic bioreactor (CSABR) seeded with silicone-immobilized sludge was developed for high-rate fermentative H2 production using sucrose as the limiting substrate. The CSABR system was operated at a hydraulic retention time (HRT) of 0.5-6 h and an influent sucrose concentration of 10-40 g COD/L. With a high feeding sucrose concentration (i.e., 30-40 g COD/L) and a short HRT (0.5 h), the CSABR reactor produced H2 more efficiently with the highest volumetric rate (VH2) of 15 L/h/L (i.e., 14.7 mol/d/L) and an optimal yield of ca. 3.5 mol H2/mol sucrose. The maximum VH2 value obtained from this work is much higher than any other VH2 values ever documented. Formation of self-flocculated granular sludge occurred during operation at a short HRT. The granule formation is thought to play a pivotal role in the dramatic enhancement of H2 production rate, because it led to more efficient biomass retention. A high biomass concentration of up to 35.4 g VSS/L was achieved even though the reactor was operated at an extremely low HRT (i.e., 0.5 h). In addition to gaining high biomass concentrations, formation of granular sludge also triggered a transition in bacterial community structure, resulting in a nearly twofold increase in the specific H2 production rate. According to denatured-gradient-gel-electrophoresis analysis, operations at a progressively decreasing HRT resulted in a decrease in bacterial population diversity. The culture with the best H2 production performance (at HRT = 0.5 h and sucrose concentration = 30 g COD/L) was eventually dominated by a presumably excellent H2-producing bacterial species identified as Clostridium pasteurianum., ((c) 2005 Wiley Periodicals, Inc.)

Municipal sewage sludge was immobilized with a modified alginate gel entrapment method, and the immobilized cells were used to produce hydrogen gas in a three-phase fluidized bed. The hydrogen-producing fluidized beds were operated at different liquid velocity (U(0)) and hydraulic retention time (HRT). The results show that in response to operating liquid velocities, the fluidized-bed system had three flow regimes, namely, plug flow, slug flow, and free bubbling. Pressure fluctuation analysis was used to analyze the hydrodynamic properties in this three-phase fluidized bed when it was under a steady-state production of biogas. With a steady-state biogas production rate (U(g)) of 0.196 mL/s/L, a transition state occurred at a liquid velocity (U(0)) of 0.85 cm/s. As U(0) < 0.85 cm/s, the system was basically a nonhomogeneous fluidized bed, whereas the bed became homogeneous when U(0) was higher than 0.85 cm/s. The fluidized bed can be stably carried out at high loading rates (HRT as low as 2 h). Hydrogen fermentation results show that the maximal hydrogen production rate was 0.93 L/h/L and the best yield (Y(H)2(/sucrose)) was 2.67 mol H(2)/mol sucrose.

Municipal sewage sludge was immobilized to produce hydrogen gas under anaerobic conditions. Cell immobilization was essentially achieved by gel entrapment approaches, which were physically or chemically modified by addition of activated carbon (AC), polyurethane (PU), and acrylic latex plus silicone (ALSC). The performance of hydrogen fermentation with a variety of immobilized-cell systems was assessed to identify the optimal type of immobilized cells for practical uses. With sucrose as the limiting carbon source, hydrogen production was more efficient with the immobilized-cell system than with the suspended-cell system, and in both cases the predominant soluble metabolites were butyric acid and acetic acid. Addition of activated carbon into alginate gel (denoted as CA/AC cells) enhanced the hydrogen production rate (v(H2)) and substrate-based yield (Y((H2)/sucrose)) by 70% and 52%, respectively, over the conventional alginate-immobilized cells. Further supplementation of polyurethane or acrylic latex/silicone increased the mechanical strength and operation stability of the immobilized cells but caused a decrease in the hydrogen production rate. Kinetic studies show that the dependence of specific hydrogen production rates on the concentration of limiting substrate (sucrose) can be described by Michaelis-Menten model with good agreement. The kinetic analysis suggests that CA/AC cells may contain higher concentration of active biocatalysts for hydrogen production, while PU and ALSC cells had better affinity to the substrate. Acclimation of the immobilized cells led to a remarkable enhancement in v(H2) with a 25-fold increase for CA/AC and ca. 10- to 15-fold increases for PU and ALSC cells. However, the ALSC cells were found to have better durability than PU and CA/AC cells as they allowed stable hydrogen production for over 24 repeated runs.

Abstract: The present study developed a low-CO methanol processor for the online supply of hydrogen to a proton exchange membrane fuel cell (PEMFC) composed of a steam reformer, a catalytic combustor and a reactor for the removal of CO. Commercial Cu/ZnO/Al2O3- and Pt/Al2O3-based catalysts were used in the methanol steam reforming and the preferential oxidation (PROX) reactor, respectively. The steam reformer was successfully heated with a catalytic combustor at room temperature without any additional electrical power supply. Hydrogen gas was obtained at a flow rate of 43.0Lh−1 using a feed flow rate of 39.5mlh−1 (S/C=1.1) and an operation temperature of 250°C, corresponding to a power output of 59We. The CO concentration could be maintained at 4–5ppm for stable operation. [Copyright &y& Elsevier]