Search

The paper reports the results of a kinetic and thermodynamic analysis of non-catalytic partial oxidation of methane and C2–C4 hydrocarbon/hydrogen mixtures (C/H = 1 : 4) at 1400–1700 K. The hydrocarbon conversion sequence and the time periods of the major process stages were identified for isothermal conditions. The initial stage of the oxidative conversion of C2+ hydrocarbons consists of their pyrolysis, primarily into ethylene and propylene, followed by oxidation of the pyrolysis products. In this respect, the kinetics of C2+ hydrocarbon oxidative conversion are different from those of methane conversion, marked by the almost simultaneous and significantly slower occurrence of pyrolysis and oxidation. The subsequent stages involve steam and dry reforming of the oxidation products, namely acetylene and methane; these stages continue until the main products (H2, CO, CO2, and H2O) reach an equilibrium distribution for the given temperature. The study findings are important for the optimization of various techniques for high-temperature syngas production via partial oxidation of C2+ hydrocarbons, as well as Moderate or Intense Low-Oxygen Dilution (MILD) combustion processes. [ABSTRACT FROM AUTHOR]

An experimental study and detailed kinetic modeling of characteristics of the matrix conversion of a methane–oxygen mixture with the addition of hydrogen, carbon monoxide, synthesis gas, and steam have been carried out. It has been shown that the most significant effect on the product composition is provided by the admixture of steam, which reduces the yield of acetylene and at the same time increases the H2/CO ratio. The kinetic simulation results appear to agree well with the experimental data obtained. [ABSTRACT FROM AUTHOR]

Flowsheets based on the results of experimental studies and detailed kinetic modeling were suggested for oxidative cracking of oil refinery gas components to obtain ethylene, CO, and hydrogen. The calculations show that oxidative cracking alone does not allow production of ethylene and СО in ratios required for the further catalytic carbonylation and hydroformylation of ethylene. Matrix conversion of a part of oxy-cracking products is suggested as an additional step for producing CO and hydrogen. [ABSTRACT FROM AUTHOR]