Search

The growing rate of electricity generation from renewables is leading to new operational and management issues on the power grid because the electricity generated exceeds local requirements and the transportation or storage capacities are inadequate. An interesting option that is under investigation by several years is the opportunity to use the renewable electricity surplus to power electrolyzers that split water into its component parts, with the hydrogen being directly injected into natural gas pipelines for both storage and transportation. This innovative approach merges together the concepts of (i) renewable power-to-hydrogen (P2H) and of (ii) hydrogen blending into natural gas networks. The combination of renewable P2H and hydrogen blending into natural gas networks has a huge potential in terms of environmental and social benefits, but it is still facing several barriers that are technological, economic, legislative. In the framework of the new hydrogen strategy for a climate-neutral Europe, Member States should design a roadmap moving towards a hydrogen ecosystem by 2050. The blending of "green hydrogen", that is hydrogen produced by renewable sources, in the natural gas network at a limited percentage is a key element to enable hydrogen production in a preliminary and transitional phase. Therefore, it is urgent to evaluate at the same time (i) the potential of green hydrogen blending at low percentage (up to 10%) and (ii) the maximum P2H capacity compatible with low percentage blending. The paper aims to preliminary assess the green hydrogen blending potential into the Italian natural gas network as a tool for policy makers, grid and networks managers and energy planners. [ABSTRACT FROM AUTHOR]

New technological solutions are required to control the impact of the increasing presence of renewable energy sources connected to the electric grid that are characterized by unpredictable production (i.e., wind and solar energy). Energy storage is becoming essential to stabilize the grid when a mismatch between production and demand occurs. Among the available solutions, Power to Hydrogen (P2H) is one of the most attractive options. However, despite the potential, many barriers currently hinder P2H market development. The literature reports general barriers and strategies to overcome them, but a specific analysis is fundamental to identifying how these barriers concretely arise in national and regional frameworks, since tailored solutions are needed to foster the development of P2H local market. The paper aims to identify and to analyze the existing barriers for P2H market uptake in Italy. The paper shows how several technical, regulatory and economic issues are still unsolved, resulting in a source of uncertainty for P2H investment. The paper also suggests possible approaches and solutions to address the Italian barriers and to support politics and decision-makers in the definition and implementation of the national hydrogen strategy. [ABSTRACT FROM AUTHOR]

A green hydrogen (H 2) economy requires a sustainable, efficient, safe, and widespread infrastructure for transporting and distributing H 2 from production to consumption sites. Transporting a hydrogen/natural gas (H2NG) mixture, including pure H 2 , through the existing European natural gas (NG) infrastructure is considered a cost-effective solution, particularly in the transitional phase. Several reasons justify the H2NG blending option. The NG infrastructure can be efficiently repurposed to transport H 2 , by blending H 2 with NG, to operate as H 2 daily storage, matching production and demand and to enable large-scale seasonal H 2 storage. Although many benefits exist, the potential of existing NG grids for transporting and distributing green H 2 may face limitations due to technical, economic, or normative concerns. This paper focuses on the state of the art of the European NG transmission and distribution metrology normative framework and identifies the gaps to be filled in case of H2NG flowing into the existing grids. The paper was revised to provide a comprehensive analysis of the practical implications resulting from the H2NG blend option. [Display omitted] • The RePowerEU planned hydrogen production and utilization to achieve decarbonization targets. • The existing gas grid is considered for transporting and distribute large hydrogen amounts. • The European Committee for Standardization defined Standards on gas grid instrumentation. • A review of the European natural gas grid metrology normative was carried out in THOTH2 Project. • Standards need to be revised to account for hydrogen-natural gas mixtures transportation. [ABSTRACT FROM AUTHOR]

Hydrogen supplying to industrial users is currently the major hydrogen business worldwide and the demand for hydrogen is almost entirely supplied from fossil fuels. In the last years a widespread interest on hydrogen has grown as energy vector for the decarbonization of multiple sectors, including industry, transport and buildings. Nevertheless, the impact of natural gas and other fossil fuels substitution with hydrogen is highly affected by the mix of different technologies and energy sources applied for hydrogen generation. The paper aims to investigate current CO 2 emissions related with hydrogen generation in Australia and Italy by means of PEM and alkaline technologies; and to evaluate the potential impact considering cell characteristics variation and 3 scenarios based on energy mix. A sensitivity analysis is performed to identify the critical parameters. Based on experimental data, the energy consumption for hydrogen production using PEM technology is more sensitive to cell voltage compared to current density, which indicates the importance of cell manufacturing and electrolyte resistance. In addition, by performing sensitivity analysis regarding energy sources scenarios it is found that carbon dioxide emission in Australia is more sensitive to renewable energy sources rather than Italy. [Display omitted] • Importance of manufacturing and electrolyte resistance because of high PEM energy consumption sensitivity to cell voltage. • Predicted emission in 2030 is 5–10 kg CO 2 using PEM/alkaline technology in Italy. • 18% reduction of national electricity grid CO 2 emission in Australia is predicted. (In 2030 in comparison to 2019). [ABSTRACT FROM AUTHOR]