Search

Hydrogels have been widely used for adsorbing heavy metal ions in wastewater treatment. Herein, a calcium alginate/poly‐N‐isopropylacrylamide double‐network hydrogel with photothermal responsiveness was prepared for adsorbing heavy metal ions in aqueous solution. The chemical composition, micromorphology, swelling properties, photothermal responsiveness, adsorption properties, and adsorption mechanism of gel microspheres were studied, respectively. The gel microspheres had an interpenetrating three‐dimensional porous structure, and their high porosity morphology and high specific surface area could ensure the adequate exposure of active adsorption sites. The gel microspheres showed excellent selective adsorption of Cr(III), and the theoretical maximum adsorption capacity of 146.16 mg/g was calculated according to the Langmuir model. Besides, its excellent photothermal conversion ability enhanced the resistance to external interference after the adsorption. Our work has provided an innovative approach to solar water purification while optimizing the preparation process. [ABSTRACT FROM AUTHOR]

Recently, wearable services that are flexible and based on conductive hydrogels have rapidly evolved and found numerous applications. These conductive hydrogels must possess remarkable mechanical strength, electrical conductivity, and sensing stability, while also being able to withstand low temperatures. However, creating hydrogels that meet all these requirements can be a lengthy and complicated process. Herein, we quickly (10 s) generated a double network conductive hydrogels (PHTF@DNH) using the double autocatalytic system consisting of TA (Tannic acid) and Fe3+. Due to the hydrogen bonding interactions between polyacrylamide (PAM), chitosan quaternary ammonium salt (HACC), TA, cross-linking of N, N′-methylene-bis-acrylamide (MBA), and ionic conduction of sodium citrate (Na 3 Cit), the hydrogel exhibit excellent tensile property (stress of 177.40 kPa, elongation at break of 788%), compressive performance (compressive strength of 1.1 MPa at 80% deformation), desirable toughness (702.60 kJ/m3), and exceptional cyclic compression and swelling properties. The hydrogel-based sensors show exceptional electrical conductivity (59.02 mS/cm), sensitivity (GF value of 1.13 at 100–550% strain), broad detection range and good signal stability. Even at −30 °C, the hydrogels still maintained stable. Eventually, it is harmless to human skin. We believe that the PHTF@DNH offer a new approach to the manufacture of sensitive wearable electronic devices. [Display omitted] • Double network conductive hydrogels (PHTF@DNH) were prepared under double autocatalytic conditions. • The hydrogel showed exceptional electrical conductivityand sensitivity. • The hydrogel exhibited excellent mechanical and swelling properties. • At a very low temperature (−30 °C), the hydrogel could maintain stable. [ABSTRACT FROM AUTHOR]

A solar-driven hydrogel composed of photothermal polydopamine (PDA) nanocoating, linear chitosan (CTS), and thermoresponsive poly(N-isopropyl acrylamide) (PNIPAM) crosslinking network was successfully synthesized to remove heavy metal ions from contaminated water. The as-prepared PDA/CTS/PNIPAM (DCN) hydrogel can achieve hydrophilic/hydrophobic phase transition driven by solar energy when the volume phase transition temperature (VPTT) was reached. The micromorphology, wetting behavior, swelling behavior, compression properties, photothermal responsiveness, and adsorption properties of hydrogels were studied one by one. The cross-linking of the controllable active nanogel (ANG) along with the modification of PDA endowed DCN hydrogel with a regular and interpenetrating porous structure, which enabled DCN to have excellent elasticity and withstand up to 80 % compressive deformation. And the hydrophilic groups of CTS and PDA reduced the water contact angle of DCN hydrogel to 13°, which was conducive to resisting the erosion of oil substances. The excellent photothermal conversion enabled DCN hydrogel to reach VPTT in only about 11 min under a simulated sunlight source. In addition, DCN hydrogel had excellent selective adsorption for Pb2+ and Cu2+, and the maximum theoretical adsorption capacities were 42.63 mg/g and 38.55 mg/g, respectively. It was also found that the volume phase transformation of hydrogel significantly enhanced its ability to resist external interference and effectively prevented the loss of heavy metal ions. [Display omitted] [ABSTRACT FROM AUTHOR]

Chitosan(CTS) has excellent adsorption capacity for heavy metal ions, the combination of chitosan with hydrogels provides a new development direction for chitosan-based adsorbents, and further improvement of adsorption can be achieved by modifying the chitosan on this basis. A semi-interpenetrating polymer network(semi-IPN) hydrogel was successfully synthesized for the removal of heavy metal ions by combining α-ketoglutaric acid grafting chitosan (KCTS) with polyacrylamide(PAM) cross-linked by N,N-methylenebis(acrylamide). This semi-IPN hydrogel had the porous structure with high specific surface area, which can expose more active sites and provide an interface for chitosan to fully contact waste water. And it had excellent selective adsorption for Cu(II), Pb(II), and Zn(II) in a mixture of five heavy metal ions. Many influencing factors affecting adsorption have been investigated, such as initial concentration of metal ions, adsorption time, pH of solution, ionic strength, and adsorbent dosage. The adsorption data were simulated well by the pseudo-second-order kinetic and adsorption isotherms were fitted well Langmuir isotherm model. At 30 °C and pH 5.0, the theoretical maximum adsorption capacities of Cu(II), Pb(II), and Zn(II) by KCTS/PAM hydrogel were 72.39, 61.41, and 51.89 mg/g, respectively. After five adsorption-desorption cycles, the adsorption capacity of Cu(II), Pb(II), and Zn(II) still maintained above 90% of initial adsorption capacity. XPS analysis illustrated that the adsorption mechanism of heavy metal ions was mainly due to coordination and ion exchange. [Display omitted] [ABSTRACT FROM AUTHOR]