Search

Hybrid energy storage systems (HESSs) help mitigating the fluctuations and variable availability of certain renewable sources, such as wind power, as they can provide support in different time scales. Therefore, regulating their state-of-charge (SOC) becomes crucial to ensure that the hybrid system complies with generation commitments agreed in time-ahead markets despite subsequent unexpected wind speed variations. So far, research has been mainly targeted at avoiding extreme SOC situations in the storage devices, whereas the regulation of this parameter to specific values has often been disregarded. A novel approach is proposed in this work, where model predictive control (MPC) is used to regulate the SOC of a HESS under variable wind and grid demand scenarios. The MPC-based supervisory controller developed for the hybrid system has been implemented and simulated under different situations. This controller monitors the future variation of the SOC with the aim of having the HESS available to develop its assigned functions successfully. The results show that a proper regulation of the SOC in the HESS increases the capacity to manage the active power supplied to the grid by the hybrid system based on wind power, as well as the level of compliance with generation commitments established time ahead.

Renewable energies are reaching the maturity of their technological development, but before they are ready to become the main or even the only power sources in the energy mix, they must become profitably manageable. Currently there are many research topics regarding the integration of renewable energies in power systems, such as the combination of two or more sources into hybrid systems, the addition of energy storage systems, etc. The present paper studies the economic feasibility of converting an existing pumped-storage hydro power plant into a hybrid hydro-wind power plant through the integration of a wind farm in its surroundings. For this purpose, the estimated economic benefits of the existing pumped-storage hydropower plant are compared with the potential benefits of the proposed hybrid hydro-wind configuration. Furthermore, two energy management systems are conceived in order to estimate the energy generated and consumed by the hybrid hydro-wind plant, as well as the income and expenses resulting from the energy purchase-sale. The results point out the economic feasibility of the project, as well as an increased participation of the hybrid plant in the power system.

In a developing world where the demand for energy increases every day, the use of hybrid systems is a viable and important solution. The rivers present a significant potential for the electrical generation from the hydrokinetic use of the river currents, as well as the use of the solar radiation by means of the generation of photovoltaic solar energy for the electrical supply in rural areas. This paper presents a combination of both forms of electricity generation, photovoltaic generators and river turbine, to configure a hybrid system together with a subsystem of support based on hydrogen and batteries to guarantee the electrical supply of a set of isolated loads. The complete design of a hybrid system satisfies the energy requirements of a load. The methodology includes the optimal location of the turbine in a cross section of the river to maximize the performance of the hydroelectric generator, and the techno-economic study of all components of the hybrid system for an efficient use of renewable energy resources. The results show that the hybrid system provides the power demanded by the loads, hydroelectric and solar photovoltaic generation are optimized, and the battery storage subsystem loading status is kept avoiding deep discharges.

This paper describes a novel energy management system for the optimized operation of the energy sources of a grid-connected hybrid renewable energy system (wind turbine and photovoltaic) with battery and hydrogen system (fuel cell and electrolyzer). A multi-objective optimization problem based on the weight aggregation approach is formulated by combining three objective functions (operating costs, efficiency and lifetime of the devices) that can conflict with each. The multi-objective function to be optimized by the energy management system is obtained by solving the problem for all the possible cases. Then, the weights that provide the minimum value of the multi-objective function are selected. As the results demonstrate, the multi-objective function becomes a single-objective function that differs according to the net power (power to be generated by/stored in the energy storage devices) and has to be solved in the energy management system of the hybrid system. It simplifies considerably the multi-objective problem implemented in the energy management system, while taking into account the three control objectives that can conflict with each other, which is the main contribution of this paper. This optimal energy management system is solved using the Particle Swarm Optimization (PSO) method, tested by simulations of the hybrid power generation system throughout 25 years (the expected lifetime of the system), and compared with the results obtained by the energy management systems based on optimizing each single-objective function separately, and by that based on optimizing the multi-objective function combining the three single-objective functions equally weighted. The results demonstrate that this energy management system achieves reasonable operating costs, efficiency and degradation of the devices.

Control focused on optimizing the lifecycle costs of a stand-alone hybrid system.Combination of renewable sources, battery and hydrogen systems.The modeling includes the electric models of the components.The system assures reliable electricity support for stand-alone applications. This paper presents an Energy Management System (EMS) for hybrid systems (HS) composed by a combination of renewable sources with the support of different storage devices (battery and hydrogen system) that allow its operation without the necessity of grid connection (i.e. a stand-alone system).The importance of the proposed EMS lies in taking into account economic issues that affect to the decision of which device of the HS must operate in each moment. Linear programming was used to meet the objective of minimizing the net present value of the operation cost of the HS for its whole lifespan. The total operation costs depend largely on the reposition costs of its components. Instead of considering predefined reposition years for each component and calculate their net present cost from them (as is commonly considered in other works), in this work it was proposed to use lifetime degradation models - based on the well-known statement that the lifetime depends on the hours of operation and the power profiles that the components are subjected to- from which the repositions are made to check how they affect to the cost calculation and, consequently, to the EMS performance.The behavior of the proposed control is checked under a long term simulation, in MATLAB-Simulink environment, whose duration is the expected lifespan of the HS (25 years). A conventional state-machine EMS is used as a case study to validate and compare the results obtained. The results demonstrate that the proposed HS and EMS combination assures reliable electricity support for stand-alone applications subject to different techno-economic criteria (generation cost and sustenance of battery SOC and hydrogen levels), achieving to minimize the operation cost of the system and extend their lifespan.

Hybrid configurations involving renewable energies and storage devices pose certain challenges regarding their energy management strategies, such as the intermittent and fluctuating power generation from renewable sources, the time-varying available energy in the storage systems, or their maximum charge and discharge limitations. Observing these aspects is mandatory in order to develop a smart energy management strategy within the hybrid system. This chapter presents a control strategy for the coordinated operation of a wind power generator and two different energy storage devices. The proposed control scheme is based on fuzzy logic to monitor the state of charge of the storage systems, while defining their power references to comply with an imposed grid demand. The control strategy has been evaluated through simulation under different operating conditions, proving a satisfactory regulation of the monitored parameters and an adequate supply of the grid requirements.

This paper provides the development of a monitoring system for a hybrid power supply which consists of different energy resources, namely, a photovoltaic array controlled via maximum power point subsystem and a fuel cell stack controlled via Proportional Integral Differential/Proportional Integral (PID/PI) subsystems and operating in ON and OFF grid modes. An energy storage system (super-capacitor, battery bank and hydrogen) controlled through DC-DC power converter embedded with PID/PI controllers is also integrated in the proposed test-bed. The proposed system is designed in two stages. In the stage one, real time weather pattern, such as solar irradiance and temperature, are measured online through the internet from the weather station using LabVIEW. In the stage two, the modelling, control and energy management of the hybrid power supply are performed in MATLAB. The overall scheme of the proposed system is performed through classical-based monitoring switching control system which maximizes the use of alternative energy resources and reduces stress on the utility for 24 hours. The proposed system uses real weather data and load demand. Simulation work concludes the effectiveness of the proposed test-bed.

This paper presents a novel energy dispatching based on Model Predictive Control (MPC) for off-grid photovoltaic (PV)/wind turbine/hydrogen/battery hybrid systems. The renewable energy sources supply energy to the hybrid system and the battery and hydrogen system are used as energy storage devices. The denominated “hydrogen system” is composed of fuel cell, electrolyzer and hydrogen storage tank. The MPC generates the reference powers of the fuel cell and electrolyzer to satisfy different objectives: to track the load power demand and to keep the charge levels of the energy storage devices between their target margins. The modeling of the hybrid system was developed in MATLAB-Simulink, taking into account datasheets of commercially available components. To show the proper operation of the proposed energy dispatching, a simpler strategy based on state control was presented in order to compare and validate the results for long-term simulations of 25 years (expected lifetime of the system) with a sample time of one hour.

Hydrokinetic river (HKT) and photovoltaic (PV) panels systems are of the promising technologies to be used for remote rural electrification. In rural areas with access to water and solar resources, renewable generation is a promising option for electrification. This paper presents a study by two sizing methods for a stand-alone hybrid generation system integrating renewable energies (PV panels and hydrokinetic) and storage system based on battery and backup generator diesel. In the first case, optimal technical sizing is achieved by using basic equations and Simulink Design Optimization (SDO). The other method perform an optimal techno-economical sizing by using the hybrid system optimization software HOMER. These methods have been applied to design a stand-alone hybrid system that supplies the load energy demand for one year, minimizing the use of the diesel generator. The results are reported and discussed in the paper.

This paper presents a comparative study of four sizing methods for a stand-alone hybrid generation system integrating renewable energies (photovoltaic panels and wind turbine) and backup and storage system based on battery and hydrogen (fuel cell, electrolyzer and hydrogen storage tank). Two of them perform a technical sizing. In one case, the sizing is based on basic equations, and in the other case, an optimal technical sizing is achieved by using Simulink Design Optimization. The other two methods perform an optimal techno-economical sizing by using the hybrid system optimization software HOMER and HOGA, respectively. These methods have been applied to design a stand-alone hybrid system which supplies the load energy demand during a year. A MATLAB-Simulink model of the hybrid system has been used to simulate the performance of hybrid system designed by each method for the stand-alone application under study in this work. The results are reported and discussed in the paper.

This paper presents two novel hourly energy supervisory controls (ESC) for improving long-term operation of off-grid hybrid systems (HS) integrating renewable energy sources (wind turbine and photovoltaic solar panels), hydrogen system (fuel cell, hydrogen tank and electrolyzer) and battery. The first ESC tries to improve the power supplied by the HS and the power stored in the battery and/or in the hydrogen tank, whereas the second one tries to minimize the number of needed elements (batteries, fuel cells and electrolyzers) throughout the expected life of the HS (25 years). Moreover, in both ESC, the battery state-of-charge (SOC) and the hydrogen tank level are controlled and maintained between optimum operating margins. Finally, a comparative study between the controls is carried out by models of the commercially available components used in the HS under study in this work. These ESC are also compared with a third ESC, already published by the authors, and based on reducing the utilization costs of the energy storage devices. The comparative study proves the right performance of the ESC and their differences.

This paper presents and evaluates three energy management systems (EMSs) based on Particle Swarm Optimization (PSO) for long-term operation optimization of a grid-connected hybrid system. It is composed of wind turbine (WT) and photovoltaic (PV) panels as primary energy sources, and hydrogen system (fuel cell –FC–, electrolyzer and hydrogen storage tank) and battery as energy storage system (ESS). The EMSs are responsible for making the hybrid system produce the demanded power, deciding on the energy dispatch among the ESS devices. The first PSO-based EMS tries to minimize the ESS utilization costs, the second one to maximize the ESS efficiency, and the third one to optimize the lifetime of the ESS devices. Long-term simulations of 25 years (expected lifetime of the hybrid system) are shown in order to demonstrate the right performance of the three EMSs and their differences. The simulations show that: 1) each EMS outperforms the others in the designed target; and 2) the third EMS is considered the best EMS, because it needs the least ESS devices, and presents the lowest total acquisition cost of hybrid system, whereas the rest of parameters are similar to the best values obtained by the other EMSs.

Hybrid systems comprising battery energy storage systems (BESSs) and wind power generation entail considerable advances on the grid integration of renewable energy. Doubly fed induction generators (DFIGs) stand out among different wind turbine (WT) technologies. On the other hand, electrochemical batteries have proved to be valid for these purposes. In this paper, a comparative analysis is carried out between two alternative configurations for hybrid WT-BESS systems, where the BESS is connected either outside or inside the DFIG. The modeling of these two configurations and the control systems applied for achieving the coordinate operation of the energy sources (DFIG and batteries) are illustrated. The hybrid systems under study are evaluated by simulation under normal operation (wind speed fluctuations and grid demand changes) and grid faults. Simulation results show that both configurations improve the grid integration capability of the WT, although the configuration with external BESS presents better results since it can provide additional active/reactive power injection. Copyright © 2014 John Wiley & Sons, Ltd.

Energy storage systems (ESSs) appear as a viable solution to some of the stability and intermittency problems of wind power generation. As a consequence, it is crucial to develop adequate control strategies that allow the coordinate operation of both energy sources. Moreover, in order to minimize the impact of large wind farms on the power system, many countries have set strict grid codes that wind power generators must accomplish. Hence, it is also necessary to pay due attention to the fault ride through capabilities of these hybrid systems. In this paper two different hybrid configurations are modeled in MATLAB/Simulink, consisting on a doubly fed induction generator driven wind turbine and electrochemical batteries as ESS. They are simulated and compared under various operating conditions (i.e. real fluctuating wind speed input with variable active and reactive power grid demand, voltage sags, three-phase and single-phase fault to ground, and overvoltage). A conventional wind turbine without ESS is also considered as a base-case in order to highlight the main benefits of the hybrid schemes. The results show that by implementing one of the presented control strategies, it is possible to enhance the response to faults of the hybrid systems, achieving higher active power injection and helping the recovery to steady-state, thus improving the grid connection capabilities of hybrid wind farms.

Integrating energy storage systems (ESS) with wind turbines results to be an interesting option for improving the grid integration capability of wind energy. This paper presents and evaluates a wind hybrid system consisting of a 1.5 MW doubly-fed induction generator (DFIG) wind turbine and double battery-ultracapacitor ESS. Commercially available components are used in this wind hybrid system. A novel supervisory control system (SCS) is designed and implemented, which is responsible for setting the active and reactive power references for each component of the hybrid system. A fuzzy logic controller, taking into account the grid demand, power generation prediction, actual DFIG power generation and state-of-charge (SOC) of the ESSs, sets the active power references. The reactive power references are proportionally delivered to each element regarding their current limitations in the SCS. The appropriate control of the power converters allows each power source to achieve the operation defined by the SCS. The wind hybrid system and SCS are assessed by simulation under wind fluctuations, grid demand changes, and grid disturbances. Results show an improved performance in the overall response of the system with the implementation of the SCS.

This paper describes and evaluates an adaptive neuro-fuzzy inference system (ANFIS)-based energy management system (EMS) of a grid-connected hybrid system. It presents a wind turbine (WT) and photovoltaic (PV) solar panels as primary energy sources, and an energy storage system (ESS) based on hydrogen (fuel cell -FC-, hydrogen tank and electrolyzer) and battery. All of the energy sources use dc/dc power converters in order to connect them to a central DC bus. An ANFIS-based supervisory control system determines the power that must be generated by/stored in the hydrogen and battery, taking into account the power demanded by the grid, the available power, the hydrogen tank level and the state-of-charge (SOC) of the battery. Furthermore, an ANFIS-based control is applied to the three-phase inverter, which connects the hybrid system to grid. Otherwise, this new EMS is compared with a classical EMS composed of state-based supervisory control system based on states and inverter control system based on PI controllers. Dynamic simulations demonstrate the right performance of the ANFIS-based EMS for the hybrid system under study and the better performance with respect to the classical EMS.

This paper presents a “full green” version of a rubber tyre gantry (RTG) crane with a fuel cell (FC) unit and supercapacitors (SCs) as energy storage system (ESS), instead of using the conventional RTG powered by a diesel engine. The SCs provide the required high current peaks and power demands when accelerating the load in the hoisting-up movement. Once the power demand reaches a steady level (hoist up constant speed), the FC provides the energy needed for the rest of the movements. The SCs are also charged when the hoist down movement is taking place. In this case, the regenerative energy can be stored in the SCs instead of being burnt in the braking resistors as in the conventional RTG crane. The new hybrid powertrain based on FC and SCs is designed and evaluated from the real driving cycle of the RTG crane. Simulation results, which include a comparative study with the current configuration of the RTG crane (powered only by diesel engine), demonstrate the technical viability of the RTG crane powered by FC and SCs. This hybrid powertrain is more expensive than the diesel powertrain, but more energy-efficient, and a better solution from the environmental point of view.

This paper presents a novel hourly energy management system (EMS) for a stand-alone hybrid renewable energy system (HRES). The HRES is composed of a wind turbine (WT) and photovoltaic (PV) solar panels as primary energy sources, and two energy storage systems (ESS), which are a hydrogen subsystem and a battery. The WT and PV panels are made to work at maximum power point, whereas the battery and the hydrogen subsystem, which is composed of fuel cell (FC), electrolyzer and hydrogen storage tank, act as support and storage system. The EMS uses a fuzzy logic control to satisfy the energy demanded by the load and maintain the state-of-charge (SOC) of the battery and the hydrogen tank level between certain target margins, while trying to optimize the utilization cost and lifetime of the ESS. Commercial available components and an expected life of the HRES of 25 years were considered in this study. Simulation results show that the proposed control meets the objectives established for the EMS of the HRES, and achieves a total cost saving of 13% over other simpler EMS based on control states presented in this paper.

This paper focuses on describing a control strategy for a real tramway, in Zaragoza (Spain), whose current propulsion system is to be replaced by a hybrid system based on fuel cell (FC) as primary energy source and batteries and ultracapacitors (UCs) as secondary energy sources. Due to its slow dynamic response, the FC needs other energy sources support during the starts and accelerations, which are used as energy storage devices in order to harness the regenerative energy generated during brakings and decelerations. The proposed energy management system is based on an operation mode control, which generates the FC reference power, and cascade controls, which define the battery and UC reference powers in order to achieve a proper control of the DC bus voltage and states of charge (SOC) of battery and UC. The simulations, performed by using the real drive cycle of the tramway, show that the proposed hybrid system and energy management system are suitable for its application in this tramway.

This paper presents a sizing method and different control strategies for the suitable energy management of a stand-alone hybrid system based on photovoltaic (PV) solar panels, hydrogen subsystem and battery. The battery and hydrogen subsystem, which is composed of fuel cell (FC), electrolyzer and hydrogen storage tank, act as energy storage and support system. In order to efficiently utilize the energy sources integrated in the hybrid system, an appropriate sizing is necessary. In this paper, a new sizing method based on Simulink Design Optimization (SDO) of MATLAB was used to perform a technical optimization of the hybrid system components. An analysis cost has been also performed, in that the configuration under study has been compared with those integrating only batteries and only hydrogen system. The dynamic model of the designed hybrid system is detailed in this paper. The models, implemented in MATLAB-Simulink environment, have been designed from commercially available components. Three control strategies based on operating modes and combining technical-economic aspects are considered for the energy management of the hybrid system. They have been designed, primarily, to satisfy the load power demand and, secondarily, to maintain a certain level at the hydrogen tank (hydrogen energy reserve), and at the state of charge (SOC) of the battery bank to extend its life, taking into account also technical-economic analysis. Dynamic simulations were performed to evaluate the configuration, sizing and control strategies for the energy management of the hybrid system under study in this work. Simulation results show that the proposed hybrid system with the presented controls is able to provide the energy demanded by the loads, while maintaining a certain energy reserve in the storage sources.

This paper evaluates the option of using a new powertrain based on fuel cell (FC), battery and supercapacitor (SC) for the Urbos 3 tramway in Zaragoza, Spain. In the proposed powertrain configuration, a hydrogen Proton-Exchange-Membrane (PEM) FC acts as main energy source, and a Li-ion battery and a SC as energy support and storage systems. The battery supports the FC during the starting and accelerations, and furthermore, it absorbs the power generated during the regenerative braking. Otherwise, the SC, which presents the fastest dynamic response, acts mainly during power peaks, which are beyond the operating range of the FC and battery. The FC, battery and SC use a DC/DC converter to connect each energy source to the DC bus and to control the energy exchange. This configuration would allow the tramway to operate in an autonomous way without grid connection. The components of the hybrid tramway, selected from commercially available devices have been modeled in MATLAB-Simulink. The energy management system used for controlling the components of the new hybrid system allows optimizing the fuel consumption (hydrogen) by applying an equivalent consumption minimization strategy. This control system is evaluated by simulations for the real driving cycle of the tramway. The results show that the proposed control system is valid for its application to this hybrid system.

SUMMARY This article presents a comparative study among four control strategies for the energy management of a fuel cell (FC) battery–powered hybrid system applied to a surface tramway of 400 kW, which, at present, operates as catenary-powered tramway in the center of Seville, Spain. The proposed hybrid system is composed of a polymer electrolyte membrane FC with a unidirectional dc/dc boost converter and a rechargeable nickel–metal hydride battery with a bidirectional dc/dc converter, both of which are coupled to a traction dc bus. This configuration allows a suitable control of the energy of the hybrid tramway and the traction dc bus voltage. The polymer electrolyte membrane FC and nickel–metal hydride battery models are designed from commercially available components. The control strategies presented in this work are as follows: (i) control strategy based on operating states of the tramway (state machine control), (ii) control strategy based on cascade control loops (cascade control), (iii) control strategy based on fuzzy logic (fuzzy logic control), and (iv) control strategy based on the fuel consumption minimization (equivalent consumption minimization strategy. The control strategies are tested and compared for the real driving cycle of the tramway. The simulation results reflect the optimal performance of the presented control systems. Copyright © 2012 John Wiley & Sons, Ltd.

This paper describes the confi guration, modelling and control of a new hybrid propulsion system for the Zaragoza tramway.The new tramway confi guration is composed by a Proton-Exchange- Membrane Fuel-Cell (PEM FC) as main energy source and a Li-ion battery and an Ultra-Capacitor (UC) as energy storage systems. Thus, the battery supports to the FC during the starting and absorbs the power generated by the regenerative braking. Otherwise, the UC, which is the element with the fastest dynamic response, acts mainly during power peaks which are beyond the operation range of the FC and battery. The FC, battery and UC provide with DC/DC converters which allow their connection to the DC bus and control the energy exchange. The new energy management system described is composed by three control loops in cascade for the FC converter and two control loops for the battery and UC. This control system has been evaluated for the real driving cycle of the tramway. The results show how the control system is valid for its application in this hybrid system.

This paper focuses on describing a control strategy for a real surface tramway powered by a hybrid system based on fuel cell and battery. This tramway, called Metro Centro , serves the centre of Seville, a city in Spain. Currently, it operates as catenary-powered tramway. The configuration and modeling of all principal components of the hybrid system are briefly described. The models, implemented in MATLAB-Simulink environment, have been designed from commercially available components. The implemented control is based on an equivalent consumption minimization strategy. It allows a suitable energy management of the hybrid system, minimizing the hydrogen consumption.

This paper presents a model for a fuel cell (FC)-battery powered hybrid system for the Metro-Centro tramway (400kW) from Seville, Spain. Modeling of each component, implemented in MATLAB/SIMULINK environment, is briefly presented. Polymer Electrolyte Membrane (PEM) FC and Ni-MH battery models are designed from commercial available components. Two control strategies are presented and tested for the energy management of the hybrid system: cascade and fuzzy logic. The objective of both strategies is to manage the primary (PEM FC) and secondary (battery) energy source to supply the power requirements of the tramway forcing the FC to work around its maximum efficiency point and maintaining the battery state of charge (SOC) in a desired level.

Steady state and dynamic simulations are performed in order to compare the models. Considering the external response of FC system integrated in the tramway hybrid system, both reduced models show similar results with an important reduction of computation time with respect to the complete model. However, the reduced model 1 shows better results than the reduced model 2 when representing the internal behaviour of FC system, so that this model is considered the most appropriate for propulsion system applications.

This paper describes the configuration, modeling, and control of a fuel cell (FC)-battery-powered hybrid system for the Metro Centro tramway in Seville, Spain. The proposed hybrid system presents a polymer electrolyte membrane FC as the primary energy source and a nickel-metal hydride cell battery as the secondary energy source, which supplements the output of the FC during tramway acceleration or whenever else needed and cruise and for energy recovery during braking. The tramway presents a traction system which is composed of four traction induction motor drives. The hybrid system also supplies the power for the auxiliary services. The power conditioning system is composed of two converters: 1) a boost-type unidirectional dc/dc converter for the FC and 2) a boost-type bidirectional dc/dc converter for the battery. The energy management system (EMS) of the hybrid tramway determines the reference signals for the electric motor drives, FC, and power converters in order to regulate accurately the power from the two electrical sources. EMS also determines the reference signal for energy dissipation in braking chopper when required during regenerative braking. In this paper, the proposed hybrid system is evaluated for the real driving cycle of the tramway. The results demonstrate the hybrid system capability to meet appropriate driving cycle.

This paper describes a comparative study of two control schemes for the energy management system of a hybrid tramway powered by a Polymer Electrolyte Membrane (PEM) Fuel Cell (FC) and an Ni-MH battery. The hybrid system was designed for a real surface tramway of 400 kW. It is composed of a PEM FC system with a unidirectional dc/dc boost converter (FC converter) and a rechargeable Ni-MH battery with a bidirectional dc/dc converter (battery converter), both of which are coupled to a traction dc bus. The PEM FC and Ni-MH battery models were designed from commercially available components. The function of the two control architectures was to effectively distribute the power of the electrical sources. One of these control architectures was a state machine control strategy, based on eight states. The other was a cascade control strategy which was used to validate the results obtained. The simulation results for the real driving cycle of the tramway reflected the optimal performance of the control systems compared in this study.

This paper presents a new Energy Management System (EMS) for a microgrid based on four energy sources: a wind turbine (WT), photovoltaic (PV) solar panels, a battery, and a hydrogen system, which is composed of a fuel cell (FC) and an electrolyzer. This novel control strategy optimizes the total cost of the hybrid system (generation and reposition costs) through lifetime estimations calculated hourly for each energy storage device (the battery and hydrogen system). This control strategy links the expected lifespans of the energy sources to their generation costs, i.e., when the lifespan is low, the generation cost increases and, consequently, this energy source will start to be used less. The performance of the novel EMS, including these estimations, was tested for an isolated load located in Alora (Spain) and compared with two simpler EMSs: EMS-1, which considered fixed generation costs and lifetimes, and EMS-2, which prioritized the use of the battery. Simulation results show the appropriate behavior for the novel EMS to optimize the generation costs and the number of required elements throughout the expected lifetime of the hybrid system (25 years).

This paper presents a sizing method and supervisory control for the suitable energy management of a stand-alone hybrid system with photovoltaic (PV) solar panels, hydrogen subsystem and battery. The battery and hydrogen subsystem, composed of fuel cell (FC), electrolyzer and hydrogen storage tank, act as energy storage and support system. A sizing method based on Simulink Design Optimization (SDO) of MATLAB is used to perform a technical optimization of the components of the hybrid system. The dynamic model of the designed hybrid system is detailed in this paper. The models, implemented in MATLAB-Simulink environment, are designed from commercially available components. It is designed, primarily, to satisfy the load power demand and, secondly, to maintain certain level at the hydrogen tank (hydrogen energy reserve), and at the state of charge (SOC) of the battery bank to extend its life.

This paper presents a comparative study of four sizing methods for a stand-alone hybrid generation system integrating renewable energies (photovoltaic panels and wind turbine) and backup and storage system based on battery and hydrogen (fuel cell, electrolyzer and hydrogen storage tank). Two of them perform a technical sizing. In one case, the sizing is based on basic equations, and in the other case, an optimal technical sizing is achieved by using Simulink Design Optimization. The other two methods perform an optimal techno-economical sizing by using the hybrid system optimization software HOMER and HOGA, respectively.

This paper compares two control strategies of a fuel cell (FC)-battery powered hybrid system integrating two dc/dc converters for the Metro-Centro tramway (400 kW) from Seville, Spain. Besides, modeling of each component is briefly presented. These models have been implemented in MATLAB/SIMULINK environment. A Polymer Electrolyte Membrane (PEM) FC is used in this work. The FC model characteristics are selected from a Nuvera 127 kW PEM FC. Two PEM FCs connected in parallel operate as primary energy source and a group of Ni-MH battery supplements the output of the FC during tramway acceleration or whenever else needed and provides regenerative braking energy recapture capability. Finally, the simulation results of both control configurations (Cascade and States Control Strategies) are presented for the real driving cycle of the tramway. The results demonstrate the hybrid system capability to meet appropriate driving cycle in both cases.

This paper compares two control configurations for a fuel cell (FC)-battery powered hybrid system for the Metro-Centro tramway (800 kW) from Seville, Spain. Besides, modeling of each components is briefly presented. These models have been implemented in MATLAB/SIMULINK environment. Polymer Electrolyte Membrane (PEM) FC model used in the simulations realized is a simplification of Jay T. Pukrushpan et al. model. The model characteristics are selected from a Nuvera 127 kW PEM FC. Four of this PEM FC´s are the primary energy source and a group of Ni-MH battery supplements the output of the FC during tramway acceleration or whenever else needed and provides regenerative braking energy recapture capability. Finally, the simulation results for both control configurations (States and Cascade Control Strategies) are presented for the real driving cycle of the tramway. The results demonstrate the hybrid system capability to meet appropriate driving cycle in both caseshese instructions give you basic guidelines for preparing camera-ready papers for conference proceedings.

This paper presents the arrangement, modeling and control of a hybrid system for a tramway. In order to supply the power consumption of the tramway (due to the auxiliary services and four traction induction motor drives), the hybrid system presents two power sources: 1) a Polymer Electrolyte Membrane (PEM) Fuel Cell (FC) as primary energy source; and 2) a Ni-MH battery as secondary energy source, which serves as a supplement to the FC for tramway acceleration or for energy recovery during braking. In addition, a braking chopper is required to absorb the regenerative energy produced by motors deceleration when it cannot be absorbed by the battery due to its limitations. Both FC and battery are coupled to a dc/dc power converter, which enables an active control of the two power sources. An energy management system (EMS) is responsible for: 1) the appropriate distribution of the power demanded by the tramway between the power sources; and 2) the braking chopper operation when required during regenerative braking. The simulation results show the hybrid system capability to allow the tramway to properly follow the driving cycle.

This paper presents a fuel cell-battery powered hybrid system for transport applications, more specifically for a tramway. It uses a Polymer Electrolyte Membrane (PEM) fuel cell (FC) as primary energy source and a Ni-MH battery as secondary energy source, which serves as a supplement to the FC during the driving cycle. The hybrid system supplies the power consumption of the auxiliary services and the traction system, which is composed of four traction induction motor drives. The energy management system (EMS) of the hybrid tramway fixes the reference signals for: 1) the FC dc/dc boost converter in order to accurately distribute power between two electrical sources; 2) the electric motor drives; 3) energy dissipation in the braking chopper when required during regenerative braking. The proposed hybrid system is assessed for a real driving cycle. The results show the hybrid system capability to allow the tramway to properly follow the driving cycle.