Search

Objective Patients with life- or limb-threatening severe injuries pose a challenge to prehospital services. Time-critical decision making and treatment are challenging because of occasional incomplete information, limited resources, adverse environments, and a range of basic and advanced technical skills available. To prepare for these infrequent critical situations, medical personnel from the helicopter emergency medical service at Oslo University Hospital developed a 1-day advanced trauma training course focusing on individual skills and teamwork during resuscitative procedures. Methods Participants were trained under supervision in teams on an established live tissue model with anesthetized pigs. A questionnaire-based evaluation was conducted before and after training to measure the feasibility of covering the allocated learning objectives in the time allotted and participants’ perception of any change in their skills as a result of the course. Results The self-reported skill level in all learning objectives improved significantly. Combining all learning objectives, the median self-reported skill level was significantly increased from 4 to 6 points (P Conclusion Experienced prehospital physicians and other health staff reported an increased level of skill and competence in lifesaving and limb-saving procedures after completing a brief, intense 1-day course using living anesthetized pigs and cadaver models.

All human tissues experience aging that eventually causes organ dysfunction and disease. Cellular senescence was discovered in fibroblasts cultured in vitro. In adults, it is a primary defense mechanism against cancer, but also a major contributor to lifespan limits and disorders associated with aging. To assess how human blood vessels change in an aged environment, we developed an elementary tissue model-on-a-chip that comprises an in vitro three-dimensional model of a blood vessel embedded in a collagen gel with young or senescent skin fibroblasts. We found that senescent fibroblasts mechanically altered the surrounding extracellular matrix by exerting excessive traction stress. We then found that senescent fibroblasts induced sprouting angiogenesis of a microvessel via their senescence-associated secretory phenotype (SASP). Finally, we gathered evidence that the mechanical changes of the microenvironment play a role in sustaining SASP-induced angiogenesis. The model proved useful in monitoring morphological changes in blood vessels induced by senescent fibroblasts while controlling the proportion of senescent cells, and enabled the study of SASP inhibitors, a class of drugs useful in aging and cancer research.

Osteochondral defects contain damage to both the articular cartilage and underlying subchon- dral bone, which remains a significant challenge in orthopedic surgery. Layered structure of bone, cartilage and the bone-cartilage interface must be taken into account in the case of biofabrication of the osteochondral (OC) interface. In this study, a dual layered OC interface was bioprinted using a newly developed aspiration-assisted bioprinting (AAB) technique, which has been the first time that scaffold-free bioprinting was applied to OC interface engineering. Tissue spheroids, made of human adipose-derived stem cells (ADSCs), were differentiated in three dimensions (3D) into chondrogenic and osteogenic spheroids, which were confirmed by immunostaining and histology qualitatively, and biochemistry assays and gene expression, quantitatively. Remarkably, the OC interface was bioprinted by accurate positioning of a layer of osteogenic spheroids onto a sacrificial alginate support followed by another layer of chondrogenic spheroids overlaid by the same support. Spheroids in individual zones fused and the maintenance of phenotypes in both zones confirmed the successful biofabrication of the histomorphologically-relevant OC interface. The biofabrication of OC tissue model without the use of polymeric scaffolds unveils great potential not only in regenerative medicine but also in drug testing and disease modeling for osteoarthritis.

The three-dimensional bioprinting technologies have attracted increasing attention due to their flexibility in producing architecturally relevant tissue constructs. Here, we present an enabling vertical embedded extrusion bioprinting strategy using uniaxial or coaxial nozzles, which allows formation of vertical structures of homogeneous or heterogeneous properties in nature. By adjusting the bioprinting parameters, the characteristics of the bioprinted vertical patterns could be precisely controlled. Using this strategy, we demonstrated two proof-of-concept applications in tissue biofabrication. Specifically, intestinal villi and hair follicles, two liner-shaped tissue types in the human body, were successfully generated with the vertical embedded bioprinting method, reconstructing some of their key structures as well as restoring partial functions in vitro. Caco-2 cells in the bioprinted intestinal villus constructs proliferated and aggregated properly, also showing functional biomarker expressions such as ZO-1 and villin. Moreover, preliminary hair follicle structures featuring keratinized human keratinocytes and spheroid-shaped human dermal papilla cells were formed after vertical bioprinting and culturing. In summary, this vertical embedded extrusion bioprinting technique harnessing a uniaxial or coaxial format will likely bring further improvements in the reconstruction of certain human tissues and organs, especially those with a linear structure in nature, potentially leading to wide utilities in tissue engineering, tissue model engineering, and drug discovery. This article is protected by copyright. All rights reserved.

Rationale: Particulate matter with an aerodynamic diameter equal or less than 2.5 µm (PM2.5) represents a main constituent of polluted air with a potential detrimental impact on human health. Objec...

Size and function of bioartificial tissue models are still limited due to the lack of blood vessels and dynamic perfusion for nutrient supply. In this study, we evaluated the use of cytocompatible methacryl-modified gelatin for the fabrication of a hydrogel-based tube by dip-coating and subsequent photo-initiated cross-linking. The wall thickness of the tubes and the diameter were tuned by the degree of gelatin methacryl-modification and the number of dipping cycles. The dipping temperature of the gelatin solution was adjusted to achieve low viscous fluids of approximately 0.1 Pa s and was different for gelatin derivatives with different modification degrees. A versatile perfusion bioreactor for the supply of surrounding tissue models was developed, which can be adapted to several geometries and sizes of blood-vessel mimicking tubes. The manufactured bendable gelatin tubes were permeable for water and dissolved substances, like Nile Blue and serum albumin. As a proof of concept, human fibroblasts in a three-dimensional collagen tissue model were successfully supplied with nutrients via the central gelatin tube under dynamic conditions for 2 days. Moreover, the tubes could be used as scaffolds to build-up a functional and viable endothelial layer. Hence, the presented tools can contribute to solving current challenges in tissue engineering.

Achieving adequate surgical exposure is fundamental to good surgical practice. Traditionally, in the repair of ventral and open inguinal hernias, this has been accomplished with the aid of self-retaining retractors or by extending the incision length. We propose that using disposable wound protectors, surgical exposure will be improved for a given incision length in the repair of ventral and open inguinal hernias, compared to traditional methods. Through the use of an animal tissue model, we compared incisions of varying lengths and measured the dimensions of the exposure achieved with disposable wound protectors (Alexis™) and a Mollison self-retainer. We calculated the surface area and, therefore, exposure gained using the specified wound retraction devices and compared the results. The average superficial surface area of wound with a self-retainer compared to the small and extra-small disposable wound protector was 2.65 cm2 vs 2.27 cm2 (small) and 2.2 cm2 (extra-small) for 2 cm incision length, 3.6 cm2 vs 4.93 cm2 and 4.2 cm2 for 3 cm incision length, 5.19 cm2 vs 8.25 cm2 and 6.27 cm2 for 4 cm incision length, 6.17 cm2 vs 12.25 cm2 and 9.07 cm2 for 5 cm incision length, and 8.75 cm2 vs 16.73 cm2 and 10.78 cm2 for 6 cm incision length [p = 0.038 (small) and p = 0.049 (extra-small)]. Our results show a statistically significant increase in surface area of a wound for each incision length when a disposable wound protector was used for exposure, compared to a self-retainer. Our results demonstrate that the use of disposable wound protectors provides superior surgical exposure for a given incision length compared to traditional techniques in the repair of ventral and open inguinal hernia repairs.

Background: Significant advances in minimally invasive implantation of mechanical circulatory support devices have been made. These approaches are technically challenging and associated with a learning curve. Simulation and training opportunities in these techniques are limited. We developed a high-fidelity novel model for minimally invasive left ventricular assist device implantation.Material and methods: Using a modified inanimate simulator (LSI SOLUTIONS®) and an animal tissue model, a hybrid simulator was created, with a porcine ex vivo heart secured within the inanimate simulator in the normal anatomic position. Key components of the minimally invasive left ventricular assist device implantation were performed, including left ventricular apical coring, attachment of the apical ring, attachment of the assist device, and creation of the aortic-outflow graft anastomosis.Results: A novel composite inanimate and tissue model for minimally invasive left ventricular assist device implantation was successfully developed. These simulation techniques were reproducible, and the model demonstrated ability to successfully simulate key components of the procedure.Conclusions: This high-fidelity, reproducible hybrid model allows for crucial components of minimally invasive LVAD implantation to be performed. This model has the potential to be used as an adjunct to surgical training, providing a safe and controlled learning environment for trainees to acquire skills in minimally invasive LVAD implantation.

Cervical insufficiency is an important cause of preterm birth, which leads to severe newborn complications. Standard treatment for cervical insufficiency is cerclage, which has variable success rates, resulting in a clinical need for alternative treatments. Our objective was to develop an ex vivo model of softened cervical tissue to study an injectable silk-based hydrogel as a novel alternative treatment for cervical insufficiency. Cervical tissue from non-pregnant women was enzymatically treated and characterized to determine tissue hydration, collagen organization, and mechanical properties via unconfined compression. Enzymatic treatment led to an 86 ± 7.9% decrease in modulus which correlated to a decrease in collagen organization as observed by differences in collagen birefringence. The softened tissue was injected with a crosslinked silk-hyaluronic acid composite hydrogel. After injection, the mechanical properties and volume increase of the hydrogel-treated tissue were measured resulting in a 54 ± 16% volume increase with minimal effect on tissue mechanical properties. In addition, cervical fibroblasts on silk-hyaluronic acid hydrogels remained viable and exhibited increased proliferation and metabolic activity over 5 days. Overall, this study developed an ex vivo pregnant-like human tissue model to assess cervical augmentation and showed the potential of silk-based hydrogels as an alternative treatment for cervical insufficiency.

Summary Purpose To provide a high-fidelity, animal tissue-based model for the advanced surgical simulation of laparoscopic dismembered pyeloplasty in infants and children. Materials and methods A previously described animal tissue model using chicken crop was surgically modified and attached to piglet kidney specimens in order to provide organ model realistically resembling infant and children hydronephrosis for simulation of dismembered laparoscopic pyeloplasty. Dismembered pyeloplasty could then be carried out in a standard pelvi-trainer using a standard instrumentation as in a regular case. Results The model created could prove to be a high-fidelity, animal tissue model for the surgical simulation of dismembered pyeloplasty. The surgical modification of the used animal tissues of chicken crop and piglet kidney respectively used in this fusion model was able to provide a high grade of resembling a realistic organ situs for infant and pediatric pyeloplasty, respectively. The surgical procedure could be carried out as a simulation of a regular case while providing high-grade realistic anatomy, adequate sizes of a dilated renal pelvis and of the ureter, respectively. Biological as well as haptic conditions of the tissue were able to resemble human tissue in a high grade as well. Discussion Despite a live animal model has been described for dismembered pyeloplasty, its time-consuming creation and possible conflict concerning animal welfare cadaver models are more practicable for daily simulation. In literature so far animal-tissue models described range from folded chicken skin to a chicken crop model. While these types of models have its own advantages and disadvantages none of them provide adequate anatomical relations. By dissecting chicken crop and fixating it to a piglet's kidney this limitation could be overcome and furthermore will enable future modifications for a perfused model for laparoscopic dismembered pyeloplasty. Conclusion The fusion of a previously described tissue model of chicken crop for simulation of pyeloplasty along with also previously used piglet kidneys for surgical simulation can provide a highly realistic model for surgical simulation of pediatric dismembered laparoscopic pyeloplasty. In addition, this model rules out the disadvantage of native animal kidney specimens which the lack of pathology of a dilated renal pelvis. Surgical modification is an established method to provide high-fidelity animal tissue models for surgical simulation and therefore training of complex procedures, respectively. For simulation purposes in pediatric laparoscopic urology, i.e., reconstructive procedures such as dismembered pyeloplasty this model appears to be promising in terms of providing realistic pathology in pediatric dimensions.

Bordetella pertussis is a highly contagious pathogen which causes whooping cough in humans. A major pathophysiology of infection is the extrusion of ciliated cells and subsequent disruption of the respiratory mucosa. Tracheal cytotoxin (TCT) is the only virulence factor produced by B. pertussis that has been able to recapitulate this pathology in animal models. This pathophysiology is well characterized in a hamster tracheal model, but human data are lacking due to scarcity of donor material. We assessed the impact of TCT and lipopolysaccharide (LPS) on the functional integrity of the human airway mucosa by using in vitro airway mucosa models developed by co-culturing human tracheobronchial epithelial cells and human tracheobronchial fibroblasts on porcine small intestinal submucosa scaffold under airlift conditions. TCT and LPS either alone and in combination induced blebbing and necrosis of the ciliated epithelia. TCT and LPS induced loss of ciliated epithelial cells and hyper-mucus production which interfered with mucociliary clearance. In addition, the toxins had a disruptive effect on the tight junction organization, significantly reduced transepithelial electrical resistance and increased FITC-Dextran permeability after toxin incubation. In summary, the results indicate that TCT collaborates with LPS to induce the disruption of the human airway mucosa as reported for the hamster tracheal model.

Metabolic modeling enables the study of human metabolism in healthy and in diseased conditions, e.g., the prediction of new drug targets and biomarkers for metabolic diseases. To accurately describe blood and urine metabolite dynamics, the integration of multiple metabolically active tissues is necessary. We developed a dynamic multi-tissue model, which recapitulates key properties of human metabolism at the molecular and physiological level based on the integration of transcriptomics data. It enables the simulation of the dynamics of intra-cellular and extra-cellular metabolites at the genome scale. The predictive capacity of the model is shown through the accurate simulation of different healthy conditions (i.e., during fasting, while consuming meals or during exercise), and the prediction of biomarkers for a set of Inborn Errors of Metabolism with a precision of 83%. This novel approach is useful to prioritize new biomarkers for many metabolic diseases, as well as for the integration of various types of personal omics data, towards the personalized analysis of blood and urine metabolites.

We extend our established agent-based multiscale computational model of infection of lung tissue by SARS-CoV-2 to include pharmacokinetic and pharmacodynamic models of remdesivir. We model remdesivir treatment for COVID-19; however, our methods are general to other viral infections and antiviral therapies. We investigate the effects of drug potency, drug dosing frequency, treatment initiation delay, antiviral half-life, and variability in cellular uptake and metabolism of remdesivir and its active metabolite on treatment outcomes in a simulated patch of infected epithelial tissue. Non-spatial deterministic population models which treat all cells of a given class as identical can clarify how treatment dosage and timing influence treatment efficacy. However, they do not reveal how cell-to-cell variability affects treatment outcomes. Our simulations suggest that for a given treatment regime, including cell-to-cell variation in drug uptake, permeability and metabolism increase the likelihood of uncontrolled infection as the cells with the lowest internal levels of antiviral act as super-spreaders within the tissue. The model predicts substantial variability in infection outcomes between similar tissue patches for different treatment options. In models with cellular metabolic variability, antiviral doses have to be increased significantly (>50% depending on simulation parameters) to achieve the same treatment results as with the homogeneous cellular metabolism.

While developments in gynecologic health research continue advancing, relatively few groups specifically focus on vaginal tissue research for areas like wound healing, device development, and/or drug toxicity. Currently, there is no standardized animal or tissue model that mimics the full complexity of the human vagina. Certain practical factors such as appropriate size and anatomy, costs, and tissue environment vary across species and moreover fail to emulate all aspects of the human vagina. Thus, investigators are tasked with compromising specific properties of the vaginal environment as it relates to human physiology to suit their particular scientific question. Our review aims to facilitate the appropriate selection of a model aptly addressing a particular study by discussing pertinent vaginal characteristics of conventional animal and tissue models. In this review, we first cover common laboratory animals studied in vaginal research – mouse, rat, rabbit, mini-pig, and sheep – as well as human, with respect to the estrus cycle and related hormones, basic reproductive anatomy, the composition of vaginal layers, developmental epithelial origin, and microflora. In light of these relevant comparative metrics, we discuss potential selection criteria for choosing an appropriate animal vaginal model. Finally, we allude to the exciting prospects of increasing biomimicry for in vitro applications to provide a framework for investigators to model, interpret, and predict human vaginal health.

Cardiovascular diseases (CVDs) are one of the leading causes of mortality worldwide and a number one killer in the USA. Cell-based approaches to treat CVDs have only shown modest improvement due to poor survival, retention, and engraftment of the transplanted cells in the ischemic myocardium. Recently, tissue engineering and the use of 3D scaffolds for culturing and delivering stem cells for ischemic heart disease are gaining rapid potential. Here, we describe a protocol for the fabrication of aligned coaxial nanofibrous scaffold comprising of a polycaprolactone (PCL) core and gelatin shell. Furthermore, we describe a detailed protocol for the efficient seeding and maintenance of human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) on these nanofibrous scaffolds, which could have a potential application in the generation of functional “cardiac patch” for myocardial repair applications as well as an in vitro 3D cardiac tissue model to evaluate the efficacy of cardiovascular drugs and cardiac toxicities.

Construction of organized three-dimensional (3D) tissue with extracellular matrix (ECM) and multiple types of cells is important for tissue engineering to enable tissue function and enhance cellular function. However, the concentration of ECM and the thickness of the 3D tissue have been limited in previous methods due to a lack of permeability to nutrients and oxygen. Besides, it is difficult to use matured natural ECM as a cell scaffold without chemical modification due to its insolubility. In this article, we focus on multi-layered structure, which is commonly found in living tissue such as skin, blood vessels, and other organs. Here, we describe the preparation of a paper-like scaffold (ECM paper) from micro-fibered natural ECM and the construction of 3D multi-layered tissue composed of cell layers and ECM layers by stacking cell-seeded ECM papers. The thickness and components of the ECM layers are easily controllable by changing the composition of the ECM papers, and the fibrous structure of ECM paper shows high permeability and permits cell migration. Additionally, the ECM microfiber, which is physically defiberized from natural ECM, has a high ECM concentration equal to that of living tissue and high stability under physiological conditions. Therefore, this set of protocols enables construction of multi-layered 3D tissue composed of precisely controlled ECM layers and cell layers that may contribute to the assembly of tissue models. © 2020 by John Wiley & Sons, Inc. Basic Protocol 1: Preparation of extracellular matrix paper Basic Protocol 2: Evaluation of cellular function of cells on extracellular matrix paper Basic Protocol 3: Construction of multi-layered 3D tissue.

Recent progress in the fields of tissue engineering, micro-electro mechanical systems, and materials science have greatly improved cell culture systems, which were traditionally performed in a static two-dimensional manner. This progress has led to a number of new cell culture concepts represented by organ-on-a-chip, three dimensional (3D)-tissues, and microphysiological systems, among others. In this review, these culture models are categorized as reconstituted human organ models, which recapitulate human organ-like structure, function, and responses with physiological relevance. In addition, we also describe the expectations of reconstituted organ models from the viewpoint of a pharmaceutical company based on recent concerns expressed in drug discovery and development. These models can be used to assess the pharmacokinetics, safety and efficacy of new molecular entities (NMEs) prior to clinical trials. They can also be used to conduct mechanistic investigations of events that arise due to administration of NMEs in humans. In addition, monitoring biomarkers of organ function in these models will aid in the translation of their changes in humans. As the majority of reconstituted human organ models show improved functional characteristics and long-term maintenance in culture, they are valuable for modeling human events. An example is described using the three-dimensional bioprinted human liver tissue model in this article. Implementation of reconstituted human organ models in drug discovery and development can be accelerated by encouraging collaboration between developers and users. Such efforts will provide significant benefits for delivering new and improved medicines to patients.

Advances in 3D and other in vitro tissue model platforms have led to fundamental improvements in research on human disease, development of novel therapies, and safety testing. In addition, histological and cellular investigations of human tissues continue to serve as keystones in understanding disease and health processes. In recognition of the importance of human tissues in research, the Physicians Committee for Responsible Medicine held a workshop. Working closely with key stakeholders from the research community, regulatory agencies, and organ procurement organizations, the goal was to explore, understand, and address the barriers to increased use of human organs, tissues, and cells in research. Workshop participants were tasked with identifying the challenges of accessing and qualifying tissues for research purposes and creating a strategy to help meet the needs of the research communities to increase the availability and quality of human tissues in biomedical and translational research. Break-out groups identified significant challenges in the areas of policy, scientific development, and public engagement with respect to the provision and application of tissues and cells for scientific advancement. Following working group recommendations, stakeholders concluded that there is a need to facilitate the availability and quality of human tissues for the research community, as well as provide a framework for education of the public, medical professionals, and researchers to foster donation and utilization for research in place of animal models. The success of these new initiatives will facilitate greater access to high-quality human tissues for biomedical and translational research and help ensure the transition away from the dependence on animal models.

The increasing demand for reliable preclinical models and to reduce, refine and, if possible, replace animal studies have brought forth the development of complex tissue cultures in different research areas, including the musculoskeletal field. In this paper, we review the literature within last 10 years on the state of progress for in vitro models of osteochondral tissue cultures, taking into account the clinical relevance of the management and treatment of osteochondral lesions. According to the selected research criteria, 35 works, 27 of which with animal tissues and 8 with human tissues, resulted to be relevant for the purposes of this review. Data analyzed revealed a great heterogeneity among the proposed tissue culture models. The anatomical harvesting sites resulted to be mainly the knee stifle joint, both for animal (prevalently bovines) and human tissues derived from joint replacement surgery, and significant heterogeneity among culture conditions and media were found. To date, very few papers have focused on the set up of a reproducible in vitro model, applicable to a variety of studies, thus suggesting a relevant gap to fill in the development of advanced three-dimensional osteochondral culture models.

Cardiovascular disease (CVD) is a major cause of morbidity and mortality worldwide. Compared to traditional therapeutic strategies, three-dimensional (3D) bioprinting is one of the most advanced techniques for creating complicated cardiovascular implants with biomimetic features, which are capable of recapitulating both the native physiochemical and biomechanical characteristics of the cardiovascular system. The present review provides an overview of the cardiovascular system, as well as describes the principles of, and recent advances in, 3D bioprinting cardiovascular tissues and models. Moreover, this review will focus on the applications of 3D bioprinting technology in cardiovascular repair/regeneration and pharmacological modeling, further discussing current challenges and perspectives.

Electrically generated cold atmospheric plasma is being intensively researched for novel applications in biology and medicine. Significant attention is being given to reactive oxygen and nitrogen species (RONS), initially generated upon plasma-air interactions, and subsequently delivered to biological systems. Effects of plasma exposure are observed to millimeter depths within tissue. However, the exact nature of the initial plasma-tissue interactions remains unknown, including RONS speciation and delivery depth, or how plasma-derived RONS intervene in biological processes. Herein, we focus on current research using tissue and cell models to learn more about the plasma delivery of RONS into biological environments. We argue that this research is vital in underpinning the knowledge required to realize the full potential of plasma in biology and medicine. Physical effects of plasma can be seen to depths of several hundred micrometers within tissue.Plasma-derived RONS are likely to be delivered millimeters into tissues.Speciation reveals that RONS delivered by plasma into tissue fluid and tissue are predominately stable secondary RONS - for example, H 2 O 2 , NO 2 - , and NO 3 - .The plasma generation of RONS within a hydrated target is influenced by the target matrix that can enhance or reduce the RONS concentrations and act as a reservoir of RONS.It is likely that the concentration of these plasma-derived RONS exceeds hundreds of micromoles, even at depths of several millimeters within tissue.Oxygen concentration at the time of plasma treatment significantly influences RONS generation within a hydrated proteinaceous target. Refereed/Peer-reviewed

To investigate the enormous complexity of the functional and pathological brain there are a number of possible experimental model systems to choose from. Depending on the research question choosing the appropriate model may not be a trivial task, and given the dynamic and intricate nature of an intact living brain several models might be needed to properly address certain questions. In this review, we aim to provide an overview of neural cell and tissue culture, reflecting on historic methodological milestones and providing a brief overview of the state-of-the-art. We additionally present an example of an effective model system pipeline, composed of dissociated mouse cultures, organotypics, acute mouse brain slices, and acute human brain slices, in that order. The sequential use of these four model systems allows a balance and progression from experimental control to human applicability, and provides a meta-model that can help validate basic research findings in a translational setting. We then conclude with a few remarks regarding the necessity of an integrated approach when performing translational and neuropharmacological studies.

BACKGROUND/PURPOSE During the injection of a fluid in a tissue model, the fluid might be affected by the needle tip configuration and the number of channels. Thus, the objective of the present work is to observe the influence of different needle tips and number of channels on the spread of a fluid. METHODS Fluid distribution data were obtained after injecting 0.3 mL of fluid into a foamed polymer model with a velocity of 2 mm/s. The spread area and the depth were determined for 3 different types of hypodermic needles: Single channel needles with bevel tip and blunt tip and a needle with conical tip and 3 internal channels. RESULTS The bevel tip provides a higher spread in the direction where the bevel points and reaches larger depths than the other two needles. The spread for the blunt tip and the polymer needle is equally distributed on both sides of the needle. The largest horizontal area around the tip is achieved by the 3-channel needle. CONCLUSION The tip configuration and number of channels have an influence on the distribution of fluid. The bevelled needle directs the fluid and reaches larger depths compared with the 3-channel needle that gets more horizontal spread.

Tissue engineering technology has provided many useful culture models. This article reviews the merits of this technology in a hepatocyte culture system and describes the applications of the sandwich-cultured hepatocyte model in drug discovery. In addition, we also review recent investigations of the utility of the 3-dimensional bioprinted human liver tissue model and spheroid model. Finally, we present the future direction and developmental challenges of a hepatocyte culture model for the successful establishment of a microphysiological system, represented as an organ-on-a-chip and even as a human-on-a-chip. A merit of advanced culture models is their potential use for detecting hepatotoxicity through repeated exposure to chemicals as they allow long-term culture while maintaining hepatocyte functionality. As a future direction, such advanced hepatocyte culture systems can be connected to other tissue models for evaluating tissue-to-tissue interaction beyond cell-to-cell interaction. This combination of culture models could represent parts of the human body in a microphysiological system.

To develop and validate a new and cost-effective animal tissue training model for practicing resection skills of transurethral resection of the prostate (TURP).A porcine kidney was prepared and restructured to simulate the relevant anatomy of the human prostate. The restructured prostate was connected to an artificial urethra and bladder. Face, content, and construct validity of the model was carried out using a 5-point Likert scale questionnaire, and comparison in task performance between participants and experts was made using observational clinical human reliability analysis.A total of 24 participants and 11 experts who practiced TURP skills on this model from October 2014 to December 2015 were recruited. The mean score on specific feature of the anatomy and color, sensation of texture and feeling of resection, conductibility of current, and efficacy and safety of the model were 4.34 ± 0.37, 4.51 ± 0.63, 4.13 ± 0.53, and 4.35 ± 0.71, respectively, by participants whereas they were 4.22 ± 0.23, 4.30 ± 0.48, 4.11 ± 0.62, and 4.56 ± 0.77, respectively, by the experts on a scale of 1 (unrealistic) to 5 (very realistic). Participants committed more technical errors than the experts (11 vs 7, p0.001), produced more movements of the instruments (51 vs 33, p0.001), and required longer operating time (11.4 vs 6.2min, p0.001).A newly developed restructured animal tissue model for training TURP was reported. Validation study on the model demonstrates that this is a very realistic and effective model for skills training of TURP. Trainees committed more technical errors, more unproductive movements, and required longer operating time.

The personal care industry is focused on developing safe, more efficacious, and increasingly milder products, that are routinely undergoing preclinical and clinical testing before becoming available for consumer use on skin. In vitro systems based on skin reconstructed equivalents are now established for the preclinical assessment of product irritation potential and as alternative testing methods to the classic Draize rabbit skin irritation test. We have used the 3-D EpiDerm™ model system to evaluate tissue viability and primary cytokine interleukin-1α release as a way to evaluate the potential dermal irritation of 224 non-ionic, amphoteric and/or anionic surfactant-containing formulations, or individual raw materials. As part of our testing programme, two representative benchmark materials with known clinical skin irritation potential were qualified through repeated testing, for use as references for the skin irritation evaluation of formulations containing new surfactant ingredients. We have established a correlation between the in vitro screening approach and clinical testing, and are continually expanding our database to enhance this correlation. This testing programme integrates the efforts of global manufacturers of personal care products that focus on the development of increasingly milder formulations to be applied to the skin, without the use of animal testing.

Successful translation of potential cancer chemotherapeutic drugs to the clinic depends on sufficient predictability of response in the human system through in vitro simulations. High expenditure and longer duration in preclinical and clinical research urge the enhancement of effective in vitro drug screening. 3D models emulate cell morphology, cell-cell and cell-matrix interactions and are physiologically more relevant for predicting drug responses for complex heterogenic cancers, widely replacing conventional cultures. Bioprinting and microfluidic technology facilitate tissue mimetic model construction and multifaceted simulation of physiology, respectively, promising more-appropriate predictability of drug interactions. Precisely, organotypic tissue constructs assembled using cell-laden matrices or organ-on-a-chip serve as realistic tissue models. This review projects the progress toward biomimetic tissue model development, highlighting the emergence of bioprinting and microfluidic technology in in vitro cancer drug screening and pertaining challenges.

Daylight activation for photodynamic therapy (PDT) of skin lesions is now widely adopted in many countries as a less painful and equally effective treatment mechanism, as compared to red or blue light activation. However, seasonal daylight availability and transient weather conditions complicate light dose estimations. A method is presented for dose planning without placing a large burden on clinical staff, by limiting spectral measurements to a one-time site assessment, and then using automatically acquired weather reports to track transient conditions. The site assessment tools are used to identify appropriate treatment locations for the annual and daily variations in sunlight exposure for clinical center planning. The spectral information collected from the site assessment can then be integrated with real-time daily electronic weather data. It was shown that a directly measured light exposure has strong correlation (R2 : 0.87) with both satellite cloud coverage data and UV index, suggesting that the automated weather indexes can be surrogates for daylight PDT optical dose. These updated inputs can be used in a dose-planning treatment model to estimate photodynamic dose at depth in tissue. A simple standardized method for estimating light dose during daylight-PDT could help improve intersite reproducibility while minimizing treatment times.

AIM To characterize a lipopolysaccharide (LPS)-treated dentine tissue model (LPS dentine) to analyse the efficacy of polycationic chitosan nanoparticles (CSnp) and/or dexamethasone conjugate chitosan nanoparticles (Dex-CSnp) on the viability/differentiation potential of stem cells from apical papilla (SCAP) when exposed to LPS dentine. A further aim was to understand the effect of macrophage-dependent inflammation on SCAP migration in the presence of LPS dentine. METHODOLOGY A total of 88 dentine slabs were used. TOF-SIMS analysis was performed amongst the LPS-treated and untreated dentine groups (n = 2/group). The study was conducted using four dentine groups: no treatment (control); LPS treatment only; LPS treatment followed by CSnp conditioning; and LPS treatment followed by Dex-CSnp conditioning groups. SCAP adherence, viability, differentiation and biomineralization potential on dentine from different groups were studied using fluorescent and scanning electron microscopy. Inflammation by macrophages in response to LPS dentine was quantified, and effect on SCAP migration was analysed. Statistical analysis was performed using Student's t-test with a significance level of P

Background Hysterectomies are the most common benign gynecologic surgical procedures performed in the United States. Currently, there are no tissue models that exist to teach trainees the techniques for colpotomy during laparoscopic hysterectomy. To address this educational gap, we have created a laparoscopic colpotomy model using a porcine stomach attached to a uterine manipulator. Methods A segment of a porcine stomach is secured onto a uterine manipulator to simulate the cervicovaginal junction. A uterus model created with craft materials and reused in subsequent sessions is placed above the porcine stomach onto the uterine manipulator tip. Porcine stomach was obtained from a local butcher or meat market costing less than $1.00 per model. The tissue can be refrigerated or frozen for storage, then thawed before each use. This model can be used with any energy device and any laparoscopic platform to teach and perform the colpotomy. Usability survey showed that trainees responded positively to the model and attendings thought it was a useful teaching tool. Experience Trainees and faculty responded favorably to the model and stated that the use of actual tissue enhanced the realism of a colpotomy simulation. Conclusion The porcine stomach laparoscopic colpotomy model is an innovative, low-cost teaching tool to add to a gynecologic surgical education simulation toolkit.

Purpose One of the main goals in software solutions for treatment planning is to automatize delineation of organs at risk (OARs). In this pilot feasibility study a clinical validation was made of computed tomography (CT)-based extracranial auto-segmentation (AS) using the Brainlab Anatomical Mapping tool (AM). Methods The delineation of nine extracranial OARs (lungs, kidneys, trachea, heart, liver, spinal cord, esophagus) from clinical datasets of 24 treated patients was retrospectively evaluated. Manual delineation of OARs was conducted in clinical routine and compared with AS datasets using AM. The Dice similarity coefficient (DSC) and maximum Hausdorff distance (HD) were used as statistical and geometrical measurements, respectively. Additionally, all AS structures were validated using a subjective qualitative scoring system. Results All patient datasets investigated were successfully processed with the evaluated AS software. For the left lung (0.97 ± 0.03), right lung (0.97 ± 0.05), left kidney (0.91 ± 0.07), and trachea (0.93 ± 0.04), the DSC was high with low variability. The DSC scores of other organs (right kidney, heart, liver, spinal cord), except the esophagus, ranged between 0.7 and 0.9. The calculated HD values yielded comparable results. Qualitative assessment showed a general acceptance in more than 85% of AS OARs—except for the esophagus. Conclusions The Brainlab AM software is ready for clinical use in most of the OARs evaluated in the thoracic and abdominal region. The software generates highly conformal structure sets compared to manual contouring. The current study design needs revision for further research.

Tissue engineering has progressed tremendously over recent decades through the generation of functional tissue analogs. Traditional approaches based on seeding cells into scaffold are limited in their capacity to produce tissues with precise biomimetic properties. Three-dimensional (3D) bioprinting is one kind of fabrication technology used to precisely dispense cell-laden biomaterials for the construction of functional tissues or organs. In recent years, much research progress has been made in 3D bioprinting technology and its application in generating tissue analogs, including skin, heart valves, blood vessels, bone, and cardiac tissue. However, it still faces many technical challenges. In this review, we introduce the current progress in 3D bioprinting technology and focus on biomaterials and their potential applications in regenerative medicine and drug discovery. Current challenges are also discussed.

Stem cell technology in regenerative medicine has the potential to provide an unlimited supply of cells for drug testing, medical transplantation and academic research. In order to engineer a realistic tissue model using stem cells as an alternative to human tissue, it is essential to create artificial stem cell microenvironment or niches. Three-dimensional (3D) bioprinting is a promising tissue engineering field that offers new opportunities to precisely place stem cells within their niches layer-by-layer. This review covers bioprinting technologies, the current development of ‘bio-inks’ and how bioprinting has already been applied to stem-cell culture, as well as their applications for human regenerative medicine. The key considerations for bioink properties such as stiffness, stability and biodegradation, biocompatibility and printability are highlighted. Bioprinting of both adult and pluriopotent stem cells for various types of artificial tissues from liver to brain has been reviewed. 3D bioprinting of stem-cell derived tissues for human regenerative medicine is an exciting emerging area that represents opportunities for new research, industries and products as well as future challenges in clinical translation. This article is part of the theme issue ‘Designer human tissue: coming to a lab near you’.

Using gold-silica nanoshell as a reference nano-agent, this work has performed preliminary numerical parametric study to investigate the feasibility and if feasible the efficiency of using a single nano-agent to achieve theranostic goals. In total, seven generics of gold-silica nanoshells have been tested including the R[50,10] (radius of the silica core is 50 nm and thickness of the gold shell is 10 nm), R[40,15], R[55,25], R[40,40], R[75,40], R[104,23], and R[154,24] nanoshells. A planar tissue model has been constructed as the platform for parametric study. For mathematical modeling, radiant transport equation (RTE) has been applied to describe the interactions among laser lights, the hosting tissue, and the hosted nanoshells and Penne's bio-heat equation has been applied to describe the hyperthermia induced by such interactions. Effects of different nanoshell generics on the diffuse reflectance signal and hyperthermia temperature transition have been simulated, basing on which the potential of a certain nanoshell generic as theranostic nano-agent has been evaluated. It has been found that it is highly feasible for gold-silica nanoshells to be engineered for theranostic purpose and nanoshell generics that are preferentially scattering should be explored for good theranostic candidates. On the condition that nanoshell generic with the right optical properties has been located, a moderate nanoshell retention in the target tissue site is already sufficient to induce effective theranostic effects, which indicates that theranostic nano-medicine might not have a stringent requirement for the delivery technique. Among nanoshells that have been tested, the R[55,25] nanoshell seems to be a promising candidate as theranostic nano-agent. Further testing on it is highly recommended. Nanoshells that are preferentially absorbing such as the R[50,10] and R[40,15] nanoshells are efficient photothermal agent and could be used for therapeutic purpose only. However, it is not recommended that preferentially absorbing nanoshells being used for theranostic purpose due to possible negative effects such nanoshells might bring to the diffuse reflectance signal.

Organized networks are common in nature showing specific tissue micro-architecture, where cells can be found isotropically or anisotropically distributed in characteristic arrangements and tissue stiffness. However, when addressing an in vitro tissue model, it is challenging to grant control over mechanical properties while achieving anisotropic porosity of polymeric networks, especially in three-dimensional systems (3-D). While progress was achieved organizing cells in two-dimension (2-D), fabrication methods for aligned networks in 3-D are limited. Here, we describe the use of a biomimetic extra-cellular matrix system allowing programming of anisotropic structures into precisely advancing pore diameters in 3-D. Using control over polymeric composition, crosslinking directionality and freezing gradient dynamics, we revealed a mechanism to top-down biofabricate 3-D structures with tunable micro-porosity capable of directing cellular responses at millimeter scale such as axonal anisotropic outgrowth that is a unique characteristic of the brain cortex. Further, we showed the unique integration of this method with a microfluidic system establishing a neural-endothelial heterotypic conjugation, which can potentially be broadly applied to multiple organ systems., The authors are grateful for the FCT distinctions attributed to Raphael F. Canadas (SFRH/BD/92565/2013), who was awarded a PhD scholarship, and to J. M. Oliveira (IF/00423/2012 and IF/01285/2015). The authors acknowledge that this material and collaboration is based in part upon work supported by FLAD. This work was in part supported by European Research Council Grant agreement ERC-2012-ADG 20120216-321266 for project ComplexiTE. The authors also thank to Morteza Miansari (previously at BAMM Lab, currently at Babol Noshirvani University of Technology, Iran) for the assistance in the design and fabrication of the microfluidic device and to Esra Karaca (previously at BAMM Lab, currently at Stanford Cardiovascular Institute, USA) for the assistance in mice primary neurons isolation., info:eu-repo/semantics/publishedVersion

Epithelial barriers are the body’s natural defense system to regulating passage from one domain to another. In our efforts to understand what can and cannot cross these barriers, models have emerged as a reductionist approach to rigorously study and investigate this question. In particular, in vitro tissue models have become prominent as there is an increased exploration of understanding biological molecular transport. Herein, we introduce the pertinent physiology, then discuss recent studies and approaches for building models of five epithelial tissues: skin, the gastrointestinal tract, the lungs, the blood–brain barrier, and the placenta. In particular, we evaluated literature from the past 5 years utilizing a tissue model to evaluate molecular transport. We then compare physiology of these tissues and discuss similarities in approaches, across tissues, to validate these models. We conclude with a summary of the approaches of growing interest across multiple tissues and an outlook on future steps to improve these models.

Purpose In vitro analyses of virulence, pathogenicity and associated host cell responses are important components in the study of biofilm infections. The Candida-related infection, denture-associated oral candidosis, affects up to 60 % of denture wearers and manifests as inflammation of palatal tissues contacting the denture-fitting surface. Commercially available three-dimensional tissue models can be used to study infection, but their use is limited for many academic research institutions, primarily because of the substantial purchase costs. The aim of this study was to develop and evaluate the use of in vitro tissue models to assess infections by biofilms on acrylic surfaces through tissue damage and Candida albicans virulence gene expression. Methodology In vitro models were compared against commercially available tissue equivalents (keratinocyte-only, SkinEthic; full-thickness, MatTek Corporation). An in vitro keratinocyte-only tissue was produced using a cancer-derived cell line, TR146, and a full-thickness model incorporating primary fibroblasts and immortalised normal oral keratinocytes was also generated. The in vitro full-thickness tissues incorporated keratinocytes and fibroblasts, and have potential for future further development and analysis. Results Following polymicrobial infection with biofilms on acrylic surfaces, both in-house developed models were shown to provide equivalent results to the SkinEthic and MatTek models in terms of tissue damage: a significant (P0.05) in the expression of most C. albicans virulence genes when comparing tissue models of the same type. Conclusion Our results confirm the feasibility and suitability of using these alternative in vitro tissue models for such analyses.

A generic research platform with 2-dimensional (2D) cell culture technology, a 3-dimensional (3D) in vitro tissue model, and a scaled-down cell culture and imaging system in between, was utilized to address the problematic issues associated with the use of serum in skin tissue engineering. Human dermal fibroblasts (HDFs) and immortalized keratinocytes (HaCat cells) mono- or co-cultured in serum or serum-free medium were compared and analyzed via the platform. It was demonstrated that serum depletion had significant influence on the attachment of HaCat cells onto tissue culture plastic (TCP), porous substrates and cellulosic scaffolds, which was further enhanced by the pre-seeded HDFs. The complex structures formed by the HDFs colonized within the porous substrates and scaffolds not only prevented the seeded HaCat cells from filtering through the open pores, but also acted as cellular substrates for HaCat cells to attach onto. When mono-cultured on TCP, both HDFs and HaCat cells were less proliferative in medium without serum than with serum. However, both cell types were successfully co-cultured in 2D using serum-free medium if the initial cell seeding density was higher than 80,000 cells/cm2 (with 1:1 ratio). Based on the results from 2D cultures, co-culture of both cell types on modular substrates with small open pores (125 μm) and cellulosic scaffolds with open pores of varying sizes (50–300 µm) were then conducted successfully in serum-free medium. This study demonstrated that the generic research platform had great potential for in-depth understanding of HDFs and HaCat cells cultivated in serum-free medium, which could inform the processes for manufacturing skin cells or tissues for clinical applications.

Functional quantification with PET is generally based on modeling that assumes tissue regions are kinetically homogeneous. Even in regions sufficiently small to approach homogeneity, spillover due to resolution limitations of PET scanners may introduce heterogeneous kinetics into measured data. Herein we consider effects of kinetic heterogeneity at the smallest volume accessible, the single image voxel. We used L-[1-11C]leucine PET and compared rates of cerebral protein synthesis (rCPS) estimated voxelwise with methods that do (Spectral Analysis Iterative Filter, SAIF) and do not (Basis Function Method, BFM) allow for kinetic heterogeneity. In high resolution PET data with good counting statistics BFM produced estimates of rCPS comparable to SAIF, but at lower computational cost; thus the simpler, less costly method can be applied. With poorer counting statistics (lower injected radiotracer doses), BFM estimates were more biased. In data smoothed to simulate lower resolution PET, BFM produced estimates of rCPS 9–14% higher than SAIF, overestimation consistent with applying a homogeneous tissue model to kinetically heterogeneous data. Hence with lower resolution data it is necessary to account for kinetic heterogeneity in the analysis. Kinetic heterogeneity may impact analyses of other tracers and scanning protocols differently; assessments should be made on a case by case basis.

This study validates that phase aberrations in breast magnetic resonance-guided focussed ultrasound (MRgFUS) therapies can be corrected in a clinically relevant time frame to generate more intense, smaller and more spatially accurate foci.Hybrid angular spectrum (HAS) ultrasound calculations in an magnetic resonance imaging (MRI)-based tissue model, were used to compute phase aberration corrections for improved experimental MRgFUS heating in four heterogeneous breast-mimicking phantoms (n = 18 total locations). Magnetic resonance(MR) temperature imaging was used to evaluate the maximum temperature rise, focus volume and focus accuracy for uncorrected and phase aberration-corrected sonications. Thermal simulations assessed the effectiveness of the phase aberration correction implementation.In 13 of 18 locations, the maximum temperature rise increased by an average of 30%, focus volume was reduced by 40% and focus accuracy improved from 4.6 to 3.6 mm. Mixed results were observed in five of the 18 locations, with focus accuracy improving from 6.1 to 2.5 mm and the maximum temperature rise decreasing by 8% and focus volume increasing by 10%. Overall, the study demonstrated significant improvements (p 0.005) in maximum temperature rise, focus volume and focus accuracy. Simulations predicted greater improvements than observed experimentally, suggesting potential for improvement in implementing the technique. The complete phase aberration correction procedure, including model generation, segmentation and phase aberration computations, required less than 45 min per sonication location.The significant improvements demonstrated in this study i.e., focus intensity, size and accuracy from phase aberration correction have the potential to improve the efficacy, time-efficiency and safety of breast MRgFUS therapies.

Assessment of dermal irritation is an essential component of the safety evaluation of medical devices. Reconstructed human epidermis (RhE) models have replaced rabbit skin irritation testing for neat chemicals and their mixtures (OECD Test Guideline 439). However, this guideline cannot be directly applied to the area of medical devices (MD) since their non-toxicity assessment is largely based on the testing of MD extracts that may have very low irritation potential. Therefore, the RhE-methods previously validated with neat chemicals needed to be modified to reflect the needs for detection of low levels of potential irritants. A protocol employing RhE EpiDerm was optimized in 2013 using known irritants and spiked polymers (Casas et al., 2013, TIV). In 2014 and 2015 MatTek In Vitro Life Science Laboratories (IVLSL) and RIVM assessed the transferability of the assay. After the successful transfer and standardization of the protocol, 17 laboratories were trained in the use of the protocol in the preparation for the validation. Laboratories produced data with 98% agreement of predictions for the selected references and controls. We conclude that a modified RhE skin irritation test has the potential to address the skin irritation potential of the medical devices. Standardization and focus on the technical issues is essential for accurate prediction.

Objective: To compare a superabsorbent polymer dressing (DryMax Extra; DME), an antibacterial absorbent polymer dressing (Sorbact absorption dressing; SB) and an antibacterial superabsorbent polymer dressing (Sorbion Sachet S; SSS) activity against Pseudomonas aeruginosa biofilms. Method: A 3D acellular synthetic soft tissue (ASST) allowing biofilm formation, was prepared and inoculated with Pseudomonas aeruginosa, before the application of dressings. The dressings DME, with and without a silver net, and two benchmark dressings SB and SSS were tested. After 24 hours' incubation, qualitative assessment by visual screening of the soft tissue and bacterial burden assessment in the dressings and acellular soft tissue model were performed. Results: DME combined with a silver net gave a distinct and wide colourless zone of inhibition while partial zones of inhibition were seen for DME, SSS and SB. Compared with the tissues exposed to the other dressings, those exposed to SB and the bacterial control appeared green and opaque. In descending order, the most visual growth was seen in bacterial control, followed by SB, SSS, and DME. The bacterial load was equivalent for all dressings without an antimicrobial substance in both ASST (around log 10) and dressing (around log 11). The bacterial load for DME combined with a silver net, in comparison to DME alone was significantly reduced, with log 3.6 in dressings and log 4.2 in ASST. Conclusion: The removal of bacteria by DME was equivalent to SB and SSS. Furthermore, DME limited the production of the green colour, indicative of Pyocyanin. If extrapolated to a wound, the ability of DME to absorb Pseudomonas aeruginosa and limit Pyocyanin levels in the wound might lead to reduced virulence.

3D bioprinting is emerging as a promising technology for fabricating complex tissue constructs with tailored biological components and mechanical properties. Recent advances have enabled scientists to precisely position materials and cells to build functional tissue models for in vitro drug screening and disease modeling. This review presents state-of-the-art 3D bioprinting techniques and discusses the choice of cell source and biomaterials for building functional tissue models that can be used for personalized drug screening and disease modeling. In particular, we focus on 3D-bioprinted liver models, cardiac tissues, vascularized constructs, and cancer models for their promising applications in medical research, drug discovery, toxicology, and other pre-clinical studies.

Tuberculosis (TB) still remains as an unmet global threat. The current vaccine is not fully effective and novel alternatives are needed. Here, two vaccine candidate strains derived from BCG carrying deletions in the BCG1416c or BCG1419c genes were analysed for their capacity to modulate the cytokine/chemokine profile and granuloma formation in a human lung tissue model (LTM). We show that the clustering of monocytes, reminiscent of early granuloma formation, in LTMs infected with BCG strains was similar for all of them. However, BCGΔBCG1419c, like M. tuberculosis, was capable of inducing the production of IL-6 in contrast to the other BCG strains. This work suggests that LTM could be a useful ex vivo assay to evaluate the potential immunogenicity of novel TB vaccine candidates.

Hemorrhage is the most preventable cause of posttraumatic death. Many cases are potentially anatomically salvageable, yet remain lethal without logistics or trained personnel to deliver diagnosis or resuscitative surgery in austere environments. Revolutions in technology for remote mentoring of ultrasound and surgery may enhance capabilities to utilize the skill sets of non-physicians. Thus, our research collaborative explored remote mentoring to empower non-physicians to address junctional and torso hemorrhage control in austere environments. Major studies involved using remote-telementored ultrasound (RTMUS) to identify torso and junctional exsanguination, remotely mentoring resuscitative surgery for torso hemorrhage control, understanding and mitigating physiological stress during such tasks, and the technical practicalities of conducting damage control surgery (DCS) in austere environments. Iterative projects involved randomized guiding of firefighters to identify torso (RCT) and junctional (pilot) hemorrhage using RTMUS, randomized remote mentoring of MedTechs conducting resuscitative surgery for torso exsanguination in an anatomically realistic surgical trainer ("Cut Suit") including physiological monitoring, and trained surgeons conducting a comparative randomized study for torso hemorrhage control in normal (1g) versus weightlessness (0g). This work demonstrated that firefighters could be remotely mentored to perform just-in-time torso RTMUS on a simulator. Both firefighters and mentors were confident in their abilities, the ultrasounds being 97% accurate. An ultrasound-naive firefighter in Memphis could also be remotely mentored from Hawaii to identify and subsequently tamponade an arterial junctional hemorrhage using RTMUS in a live tissue model. Thereafter, both mentored and unmentored MedTechs and trained surgeons completed resuscitative surgery for hemorrhage control on the Cut-Suit, demonstrating practicality for all involved. While remote mentoring did not decrease blood loss among MedTechs, it increased procedural confidence and decreased physiologic stress. Therefore, remote mentoring may increase the feasibility of non-physicians conducting a psychologically daunting task. Finally, DCS in weightlessness was feasible without fundamental differences from 1g. Overall, the collective evidence suggests that remote mentoring supports diagnosis, noninvasive therapy, and ultimately resuscitative surgery to potentially rescue those exsanguinating in austere environments and should be more rigorously studied.

Since current experimental models of Atrial Fibrillation (AF) have significant limitations, we used human embryonic stem cells (hESCs) to generate an atrial-specific tissue model of AF for pharmacologic testing. We generated atrial-like cardiomyocytes (CMs) from hESCs which preferentially expressed atrial-specific genes, and had shorter action potential (AP) durations compared to ventricular-like CMs. We then generated confluent atrial-like CM sheets and interrogated them using optical mapping techniques. Atrial-like CM sheets (~1 cm in diameter) showed uniform AP propagation, and rapid re-entrant rotor patterns, as seen in AF could be induced. Anti-arrhythmic drugs were tested on single atrial-like CMs and cell sheets. Flecainide profoundly slowed upstroke velocity without affecting AP duration, leading to reduced conduction velocities (CVs), curvatures and cycle lengths of rotors, consistent with increased rotor organization and expansion. By contrast, consistent with block of rapid delayed rectifier K+ currents (Ikr) and AP prolongation in isolated atrial-like CMs, dofetilide prolonged APs and reduced cycle lengths of rotors in cell sheets without affecting CV. In conclusion, using our hESC-derived atrial CM preparations, we demonstrate that flecainide and dofetilide modulate reentrant arrhythmogenic rotor activation patterns in a manner that helps explain their efficacy in treating and preventing AF.

Three-dimensional (3D) cell culture models are gaining increasing interest for use in drug development pipelines due to their closer resemblance to human tissues. Hydrogels are the first-choice class of materials to recreate in vitro the 3D extra-cellular matrix (ECM) environment, important in studying cell-ECM interactions and 3D cellular organization and leading to physiologically relevant in vitro tissue models. Here we propose a novel hydrogel platform consisting of a 96-well plate containing pre-cast synthetic PEG-based hydrogels for the simple establishment of 3D (co-)culture systems without the need for the standard encapsulation method. The in-depth density gradient at the surface of the hydrogel promotes the infiltration of cells deposited on top of it. The ability to decouple hydrogel production and cell seeding is intended to simplify the use of hydrogel-based platforms and thus increase their accessibility. Using this platform, we established 3D cultures relevant for studying stem cell differentiation, angiogenesis, and neural and cancer models., SLAS Discovery, 22 (5)

Distribution patterns/performance of magnetic nanoparticles (MNPs) was visualized by computer simulation and experimental validation on agarose gel tissue-mimicking phantom (AGTMP) models. The geometry of a complex three-dimensional mathematical phantom model of a cancer tumor was examined by tomography imaging. The capability of mathematical model to predict distribution patterns/performance in AGTMP model was captured. The temperature profile vs. hyperthermia duration was obtained by solving bio-heat equations for four different MNPs distribution patterns and correlated with cell death rate. The outcomes indicated that bio-heat model was able to predict temperature profile throughout the tissue model with a reasonable precision, to be applied for complex tissue geometries. The simulation results on the cancer tumor model shed light on the effectiveness of the studied parameters.

Three-dimensional (3D) tissue constructs consisting of human cells have opened a new avenue for tissue engineering, pharmaceutical and pathophysiological applications, and have great potential to estimate the dynamic pharmacological effects of drug candidates, metastasis processes of cancer cells, and toxicity expression of nano-materials, as a 3D-human tissue model instead of in vivo animal experiments. However, most 3D-cellular constructs are a cell spheroid, which is a heterogeneous aggregation, and thus the reconstruction of the delicate and precise 3D-location of multiple types of cells is almost impossible. In recent years, various novel technologies to develop complex 3D-human tissues including blood and lymph capillary networks have demonstrated that physiological human tissue responses can be replicated in the nano/micro-meter ranges. Here, we provide a brief overview on current 3D-tissue fabrication technologies and their biomedical applications. 3D-human tissue models will be a powerful technique for pathophysiological applications.

This review is intended to provide an overview of tissue engineering strategies using scaffold biomaterials to develop a vascularized tissue engineered construct for nano-pathophysiology. Two primary topics are discussed. The first is the biological or synthetic microenvironments that regulate cell behaviors in pathological conditions and tissue regeneration. Second is the use of scaffold biomaterials with angiogenic factors and/or cells to realize vascularized tissue engineered constructs for nano-pathophysiology. These topics are significantly overlapped in terms of three-dimensional (3-D) geometry of cells and blood vessels. Therefore, this review focuses on neovascularization of 3-D scaffold biomaterials induced by angiogenic factors and/or cells. The novel strategy of this approach in nano-pathophysiology is to utilize the vascularized tissue engineered construct as a tissue model to predict the distribution and subsequent therapeutic efficacy of a drug delivery system with different physicochemical and biological properties.