Search

Electrocorticography (ECoG) signals can provide high spatio-temporal resolution and high signal to noise ratio recordings of local neural activity from the surface of the brain. Previous studies have shown that broad-band, spatially focal, high-frequency increases in ECoG signals are highly correlated with movement and other cognitive tasks and can be volitionally modulated. However, significant additional information may be present in inter-electrode interactions, but adding additional higher order inter-electrode interactions can be impractical from a computational aspect, if not impossible.In this paper we present a new method of calculating high frequency interactions between electrodes called Short-Time Windowed Covariance (STWC) that builds on mathematical techniques currently used in neural signal analysis, along with an implementation that accelerates the algorithm by orders of magnitude by leveraging commodity, off-the-shelf graphics processing unit (GPU) hardware.Using the hardware-accelerated implementation of STWC, we identify many types of event-related inter-electrode interactions from human ECoG recordings on global and local scales that have not been identified by previous methods. Unique temporal patterns are observed for digit flexion in both low- (10mm spacing) and high-resolution (3mm spacing) electrode arrays.Covariance is a commonly used metric for identifying correlated signals, but the standard covariance calculations do not allow for temporally varying covariance. In contrast STWC allows and identifies event-driven changes in covariance without identifying spurious noise correlations.STWC can be used to identify event-related neural interactions whose high computational load is well suited to GPU capabilities.

The majority of subjects who attempt to learn control of a brain–computer interface (BCI) can do so with adequate training. Much like when one learns to type or ride a bicycle, BCI users report transitioning from a deliberate, cognitively focused mindset to near automatic control as training progresses. What are the neural correlates of this process of BCI skill acquisition? Seven subjects were implanted with electrocorticography (ECoG) electrodes and had multiple opportunities to practice a 1D BCI task. As subjects became proficient, strong initial task-related activation was followed by lessening of activation in prefrontal cortex, premotor cortex, and posterior parietal cortex, areas that have previously been implicated in the cognitive phase of motor sequence learning and abstract task learning. These results demonstrate that, although the use of a BCI only requires modulation of a local population of neurons, a distributed network of cortical areas is involved in the acquisition of BCI proficiency.

Objective Human voluntary movements are a final product of complex interactions between multiple sensory, cognitive and motor areas of central nervous system. The objective was to investigate temporal sequence of activation of premotor (PM), primary motor (M1) and somatosensory (S1) areas during cued finger movements. Methods Electrocorticography (ECoG) was used to measure activation timing in human PM, S1, and M1 neurons in preparation for finger movements in 5 subjects with subdural grids for seizure localization. Cortical activation was determined by the onset of high gamma (HG) oscillation (70–150Hz). The three cortical regions were mapped anatomically using a common brain atlas and confirmed independently with direct electrical cortical stimulation, somatosensory evoked potentials and detection of HG response to tactile stimulation. Subjects were given visual cues to flex each finger or pinch the thumb and index finger. Movements were captured with a dataglove and time-locked with ECoG. A windowed covariance metric was used to identify the rising slope of HG power between two electrodes and compute time lag. Statistical constraints were applied to the time estimates to combat the noise. Rank sum testing was used to verify the sequential activation of cortical regions across 5 subjects. Results In all 5 subjects, HG activation in PM preceded S1 by an average of 53±13ms ( P =0.03), PM preceded M1 by 180±40ms ( P =0.001) and S1 activation preceded M1 by 136±40ms ( P =0.04). Conclusions Sequential HG activation of PM, S1 and M1 regions in preparation for movements is reported. Activity in S1 prior to any overt body movements supports the notion that these neurons may encode sensory information in anticipation of movements, i.e., an efference copy. Our analysis suggests that S1 modulation likely originates from PM. Significance First electrophysiological evidence of efference copy in humans.

Dorsolateral Prefrontal Cortex (DLPFC) has been associated with goal encoding in primates. Thus far, the majority of research involving DLPFC, including all electrophysiology studies, has been performed in non-human primates. In this paper, we explore the possibility of utilizing the cortical activity in DLPFC in humans for use in Brain-Computer Interfaces (BCIs). Electrocorticographic signals were recorded from seven patients with intractable epilepsy who had electrode coverage over DLPFC. These subjects performed a visuomotor target-based task to assess DLPFC's involvement in planning, execution, and accomplishment of the simple motor task. These findings demonstrate that there is a distinct high-frequency spectral component in DLPFC associated with accomplishment of the task. It is envisioned that these signals could potentially provide a novel verification of task accomplishment for a BCI.

The learning of a motor task is known to be improved by sleep, and sleep spindles are thought to facilitate this learning by enabling synaptic plasticity. In this study subjects implanted with electrocorticography (ECoG) arrays for long-term epilepsy monitoring were trained to control a cursor on a computer screen by modulating either the high-gamma or mu/beta power at a single electrode located over the motor or premotor area. In all trained subjects, spindle density in posttraining sleep was increased with respect to pretraining sleep in a remarkably spatially specific manner. The pattern of increased spindle activity reflects the functionally specific regions that were involved in learning of a highly novel and salient task during wakefulness, supporting the idea that sleep spindles are involved in learning to use a motor-based brain–computer interface device.

Invasive and non-invasive brain–computer interface (BCI) studies have long focused on the motor cortex for kinematic control of artificial devices. Most of these studies have used single-neuron recordings or electroencephalography (EEG). Electrocorticography (ECoG) is a relatively new recording modality in BCI research that has primarily been built on successes in EEG recordings. We built on prior experiments related to single-neuron recording and quantitatively compare the extent to which different brain regions reflect kinematic tuning parameters of hand speed, direction, and velocity in both a reaching and tracing task in humans. Hand and arm movement experiments using ECoG have shown positive results before, but the tasks were not designed to tease out which kinematics are encoded. In non-human primates, the relationships among these kinematics have been more carefully documented, and we sought to begin elucidating that relationship in humans using ECoG. The largest modulation in ECoG activity for direction, speed, and velocity representation was found in the primary motor cortex. We also found consistent cosine tuning across both tasks, to hand direction and velocity in the high gamma band (70–160 Hz). Thus, the results of this study clarify the neural substrates involved in encoding aspects of motor preparation and execution and confirm the important role of the motor cortex in BCI applications.

We present results of cortical activity during phoneme pronunciation, recorded using miniaturized electrocorticography grids with high spatial resolution. A patient implanted with the miniature grid was instructed to audibly pronounce one of four phonemes. For each phoneme, we observed distinct spatial correlation patterns at the 3mm electrode spacing. We applied a support vector machine classification scheme and, for the first time, were able to distinguish discrete phonemes with high accuracy. In addition, we found that sub-regions of our miniature array were specific for distinct pairs of phonemes, showing that cortical phoneme processing occurs at a higher resolution than previously though.

Three human subjects participated in a closed-loop brain computer interface cursor control experiment mediated by implanted subdural electrocorticographic arrays. The paradigm consisted of several stages: baseline recording, hand and tongue motor tasks as the basis for feature selection, two closed-loop one-dimensional feedback experiments with each of these features, and a two-dimensional feedback experiment using both of the features simultaneously. The two selected features were simple channel and frequency band combinations associated with change during hand and tongue movement. Inter-feature correlation and cross-correlation between features during different epochs of each task were quantified for each stage of the experiment. Our anecdotal, three subject, result suggests that while high correlation between horizontal and vertical control signal can initially preclude successful two-dimensional cursor control, a feedback-based learning strategy can be successfully employed by the subject to overcome this limitation and progressively decorrelate these control signals.

All previous multiple-day brain-computer interface (BCI) experiments have dynamically adjusted the parameterization between the signals measured from the brain and the features used to control the interface. The authors present the results of a multiple-day electrocorticographic (ECoG) BCI experiment. A patient with a subdural electrode array implanted for seizure localization performed tongue motor tasks. After an initial screening and feature selection on the 1st day, 5 consecutive days of cursor-based feedback were performed with a fixed parameterization. Control of the interface was robust throughout all days, with performance increasing to a stable state in which high-frequency ECoG signal could immediately be translated into cursor control. These findings demonstrate that ECoG-based BCIs can be implemented for multiple-day control without the necessity for sophisticated retraining and adaptation.