Search

Background Bony defects are common injuries associated with anterior shoulder dislocation. It is generally thought that these bony defects are created at the time of dislocation. However, there have been no biomechanical reports demonstrating the exact time point when these lesions occur. The purpose of this study was to clarify when, how, and which types of bony defects were created during experimental dislocation in cadaveric shoulders. Methods Fifteen fresh-frozen cadaveric shoulders (mean age at the time of death, 79 years) were fixed in a custom testing machine. First, the glenohumeral joint was inspected by arthroscopy. Then, the arm was held at 60° of abduction and maximum external rotation and was manually extended horizontally under fluoroscopy until an anterior dislocation occurred. Next, a force of 800 N was applied to a Kirschner wire inserted in the humeral head in the direction of the pectoralis major with use of an air cylinder. We waited until the arm came to equilibrium under this condition. Finally, the glenohumeral joint was arthroscopically examined. We further performed x-ray micro–computed tomography and histologic examination in 1 shoulder with a bipolar lesion. Results After the anterior dislocation, a Bankart lesion was created in 9 of 15 shoulders and a fragment-type glenoid defect (avulsion fracture) was created in 4. A Hill-Sachs lesion, on the other hand, was not observed after the dislocation. The equilibrium arm position was 40° ± 17° in flexion, 45° ± 22° in abduction, and 27° ± 19° in external rotation. In this arm position, newly created lesions were Hill-Sachs lesions in 6 shoulders and erosion-type glenoid defects (compression fracture) in 7. Micro–computed tomography, performed in a single specimen, showed a flattened anterior glenoid rim with collapse of trabecular bone. Histologic analysis of nondecalcified sections using hematoxylin-eosin staining indicated that the anterior rim of the glenoid was compressed and flattened. The cortex of the anterior glenoid rim could be clearly observed. Conclusion The fragment-type glenoid defect (avulsion fracture) was observed at the time of dislocation, whereas the erosion-type defect (compression fracture) was observed when the arm came to equilibrium in the midrange of motion. Hill-Sachs lesions were created not at the time of dislocation but after the arm came to equilibrium.

Background The purpose was to determine the risk and outcomes of primary shoulder arthroplasties in patients with immunosuppression who had undergone solid organ transplantation. Methods Using a single institution's total joint registry, we reviewed 30 primary shoulder arthroplasties in 25 post-transplantation patients, including 12 total shoulder arthroplasties, 10 hemiarthroplasties, and 8 reverse shoulder arthroplasties, between 1985 and 2012. Therapy and patient variables were recorded, including immunosuppressive therapy protocols, the date of preceding solid organ transplantation, and specific medications taken in the perioperative period. We matched a cohort of control patients for age, sex, type of implant, and year of surgery at a ratio of 4:1. Two groups were compared regarding mortality risk, complications, and clinical outcomes (pain score, range of motion, and American Shoulder and Elbow Surgeons score). Results No periprosthetic infections occurred in the post-transplantation group at a mean follow-up of 39 months. However, the post-transplantation group showed an increased risk of periprosthetic fractures compared with the control group (hazard ratio, 8.18; 95% confidence interval, 1.22-70.98; P = .03). Despite the increase in fractures, the overall number of complications did not differ between the groups. Furthermore, postoperative shoulder function and outcome scores were not significantly different between patients who had a prior transplant and those who did not. Conclusion Primary shoulder arthroplasty in patients with immunosuppression who underwent solid organ transplantation is a successful procedure to treat glenohumeral arthritis. In contrast, there may be an increased risk of periprosthetic fractures in patients with a history of a solid organ transplant.

A curved-drill guide system was recently introduced to achieve a better trajectory for a low anteroinferior anchor during arthroscopic Bankart repair. However, the clinical performance of such a device remains unclear. The purpose of this study was to evaluate the trajectory and position of the low anteroinferior suture anchor with use of the curved-guide system in clinical cases.We enrolled 41 cases of arthroscopic Bankart repair in this study. Of these cases, 9 were repaired using the curved drill guide whereas 32 were repaired using a conventional straight guide. Postoperative computed tomography scans were obtained, and 3-dimensional models of the scapula were reconstructed. Notable perforations of the opposite cortex by the most inferior anchors were recorded. The clock-face angle, insertion angle, and insertion distance were measured.The anchor perforation rate in the curved-guide group (11%) was significantly lower than that in the straight-guide group (56%) (P = .02). The insertion distance in the curved-guide group was significantly shorter than that in the straight-guide group (4.0 ± 1.6 mm vs. 7.0 ± 2.4 mm, P.01). The clock-face angle and insertion angle were significantly greater in the perforated straight-guide group than in the nonperforated groups. The percentage of anchors in the absolute safe zone (clock-face angle135° and165° and insertion angle100°), where no anchors perforated, was greater in the curved-guide group than the straight-guide group.Compared with the conventional straight guide, the curved-guide system provides better placement of the most inferior suture anchor during arthroscopic Bankart repair.

Background: The glenoid track concept has been widely used to assess the risk of instability caused by a bipolar lesion. The mean glenoid track width is reported to be 83% of the glenoid width. However, this width seems to be affected by the range of motion of the shoulder. By clarifying the relationship between the range of shoulder motion and the glenoid track width, a more precise determination of the glenoid track width for each individual could be possible. Purpose: To determine the relationship between the glenoid track width and the range of motion of healthy volunteers. Study Design: Descriptive laboratory study. Methods: Magnetic resonance imaging was taken in 41 shoulders of 21 healthy volunteers (mean age, 32 years) with the arm in maximum horizontal extension, with the arm kept in 90° of abduction and 90° of external rotation. Three-dimensional surface bone models of the glenoid and the humerus were created with image analysis software. The distance from the anterior rim of the glenoid to the medial margin of the footprint of the rotator cuff tendon was defined as the glenoid track width. Active and passive ranges of shoulder motion were measured in the supine and sitting positions. The correlations between the glenoid track width and the ranges of shoulder motion were investigated with Pearson correlation coefficients. Intra- and interobserver reliabilities based on the intraclass correlation coefficient were also analyzed to assess the reliability of the glenoid track measurement. Results: The intra- and interobserver reliabilities for the glenoid track measurement were excellent (0.988 and 0.988, respectively). Among all the measurements, the glenoid track width and the active range of motion in horizontal extension in the sitting position showed the greatest correlation coefficient ( r = −0.623, P < .0001). A correlation between the glenoid track width and this angle was expressed as Y = −0.49 X + 90, where X is the horizontal extension angle (degrees) and Y is the glenoid track width (percentage of glenoid width). Conclusion: The present data demonstrate that the greater the horizontal extension angle in abduction and external rotation, the smaller the glenoid track width. An individualized glenoid track width can be obtained by measuring the active horizontal extension angle with the arm in abduction and external rotation in the sitting position. Clinical Relevance: An individualized glenoid track width enables selection of a more precise surgical option by the on-track/off-track concept.

Background: Ultrasonographically measuring the median nerve cross-sectional area (MN-CSA) is a useful and complementary method for diagnosing carpal tunnel syndrome (CTS). This study investigated the usefulness of the median nerve transverse diameter (MN-TD) as a simpler and easier technique than MN-CSA for diagnosing CTS severity. Methods: We examined 145 hands from 101 patients with CTS and 114 age- and gender-matched control hands. Based on the electrodiagnostic findings, the severity of CTS was divided into minimal, mild, moderate, severe and extreme. An ultrasonographic assessment of MN-TD and MN-CSA was performed to measure the maximal values around the carpal tunnel inlet level. The values were assessed for comparisons between the CTS and control groups and for the evaluation of differences by CTS severity. Results: The ultrasonographic measurements of MN-TD and MN-CSA were significantly increased in the CTS group compared to the normal group. Furthermore, both measurements significantly increased with increasing CTS severity. A receiver operating characteristic curve (ROC) analysis showed that participants with MN-TD > 7.2 mm had CTS with 88% specificity and 74% sensitivity, and those with MN-CSA > 12.0 mm2 had CTS with 86% specificity and 84% sensitivity. Conclusions: Ultrasonographic measurement for MN-TD may be useful for diagnosing CTS patients and predicting the severity.

Rotator cuff tears are common in the older population. Atrophy and fat infiltration develop un-evenly in torn supraspinatus (SSP) muscles leading to pre- and post-surgical complications. The purpose of the current study was twofold: first, to implement a volumetric and quantitative magnetic resonance imaging (MRI) approach to quantify the degree of muscle atrophy and fat infiltration within the SSP muscle and its four sub-regions (AS, PS, AD, and PD); second to compare 3-D MRI outcomes to the standard 2-D assessment and investigate their relationship with tear size.Fifteen cadaveric shoulders were obtained and MRI performed. Quantitative 3-D outcomes included SSP muscle volume, fossa volume, fat-free muscle volume, and fat fraction for the whole SSP muscle and its four sub-regions. 2-D and qualitative measurements included tear size, 2-D fat infiltration using the Goutallier classification, tangent sign, and occupation ratio.Linear regression outcomes with tear size were not significant for both cross-sectional area (r = - 0.494, p = 0.061) and occupation ratio (r = - 0.011, p = 0.969). Tear size negatively correlated with fat-free muscle volume for both AS and PS sub-regions (AS: r = - 0.78, p 0.001; PS: r = - 0.68, p = 0.005, respectively) while showing no significant correlation with fat fraction outcomes. AD and PD sub-regions positively correlated with tear size and fat fraction outcomes (AD: r = 0.70, p = 0.017; PD: r = 0.52, p = 0.045, respectively), while no significant correlation was observed between tear size and fat-free muscle volumes.Quantitative 3-D volumetric assessment of muscle degeneration resulted in better outcomes compared to the standard 2-D evaluation. The superficial supraspinatus muscle sub-regions primarily presented muscle atrophy, while the deep sub-regions were mainly affected by fat infiltration. 3-D assessments could be used pre-surgically to determine the best course of treatment and to estimate the muscles' regenerative capacity and function.

Background Focus has recently been on the critical shoulder angle (CSA) as a factor related to rotator cuff tear and osteoarthritis (OA) in the European population. However, whether this relationship is observed in the Asian population is unclear. Methods The correlation between the CSAs measured on anteroposterior radiographs and the presence or absence of rotator cuff tears or OA changes was assessed in 295 patients. Rotator cuff tears were diagnosed with magnetic resonance imaging or ultrasonography. OA findings were classified using the Samilson-Prieto classification. The CSAs among the patients with rotator cuff tears, OA changes, and those without pathologies were compared. Multivariable analyses were used to clarify the potential risks for these pathologies. Results The mean CSA with rotator cuff tear (33.9° ± 4.1°) was significantly greater than that without a rotator cuff tear (32.3° ± 4.5°; P = .002). Multivariable analysis also showed that a greater CSA had a significantly increased risk of rotator cuff tears, with the odds ratio of 1.08 per degree. OA findings showed no significant correlation to the CSAs. Conclusions Our study demonstrates that the CSA is greater in those with a rotator cuff tear than in those without a tear or OA changes, which may be an independent risk factor for the incidence of rotator cuff tears in the Japanese population.

Treatment with injection of collagenase Clostridium histolyticum (CCH) has been recognized as an effective option for the Dupuytren's contracture (DC) in Europe and North America. However, there are no studies describing mid-term efficacy of CCH treatment in East-Asian population. The purpose of this study was to assess 2-year outcomes following CCH treatment in Japanese patients.Twenty hands (28 joints) from 18 DC patients underwent CCH injection with manipulation according to the product specifications with 2-year follow-up. Patients were assessed for extension deficit on treated metacarpophalangeal (MCP) and/or proximal interphalangeal (PIP) joints before treatment, at 4 weeks and 2 years after the treatment.At 4 weeks after CCH treatment, contracture of treated joints significantly improved from the mean extension deficit of 45° before treatment to 3° for MCP joints, and from 41° to 14° for PIP joints (P 0.001,0.001, respectively). Improved contracture was maintained with 4° and 23° at 2 years after CCH treatment (P 0.001,0.05, respectively). Successful correction defined as ≤ 5° extension deficit was obtained in 14/16 MCP and 5/12 PIP joints at 4 weeks; of these, 11 MCP and 1 PIP joints maintained the corrected range of motion at 2-year follow-up.CCH treatment could be a useful option to improve contracture in Japanese patients. During 2-year follow-up, this treatment could provide comparable effect durability to previous studies from Western countries. Moreover, our results support the evidence that better correction of the contracture can be obtained in the MCP joints than PIP joints after CCH treatment.

Background Immobilization with shoulder braces is used for conservative treatment of an initial shoulder dislocation. Various arm positions have been investigated to determine optimal position in terms of the anatomical reduction of the Bankart lesion. Recently, the effect of immobilization in shoulder abduction as well as in external rotation has been reported. However, there are few studies assessing subjects' acceptability of the brace in various arm positions. We hypothesized that a certain arm position regarding abduction or external rotation for immobilization would induce significant discomfort during activities of daily living. Methods A dominant arm of 20 healthy participants was immobilized with a shoulder brace in 4 different positions; adduction and internal rotation (Add-IR), adduction and external rotation (Add-ER), 30° of abduction and 30° of external rotation (Abd-30ER), and 30° of abduction and 60° of external rotation (Abd-60ER). After completing immobilization for 24 h, subjects were asked to assess the discomfort of bracing for overall and individual activities, using a visual analogue scale. Data were compared among the four positions. Results For overall activities and several activities (eating, reading books, and removing and putting on pants), Abd-60ER was significantly more uncomfortable than adducted arm positions. Abd-30ER did not show any differences compared to the other arm positions. Conclusion Immobilization in abduction and external rotation seems to be acceptable although the arm position in 30° of abduction and 60° of external rotation is less comfortable than the others. Our results might be useful in determining and developing the ideal shoulder brace which could keep patients' compliance and improve their outcomes.

Background: It has been demonstrated biomechanically that 25% is a critical size defect of the glenoid. However, a recent clinical study reported that a bone loss between 13.5% and 20% (subcritical bone loss) led to impairment of quality of life but not a recurrence of instability. Purpose: To clarify whether a subcritical bone loss exists in assessing a Hill-Sachs lesion via a disease-specific quality of life questionnaire. Study Design: Cohort study; Level of evidence, 3. Methods: Fifty patients (mean age, 27 years) with Results: The recurrence rate was 6% (3 of 50 shoulders). The Rowe score significantly improved from 45.2 ± 4.7 (mean ± SD) preoperatively to 92.3 ± 6.5 at the final follow-up ( P < .05). The WOSI score also significantly increased from 46.6% ± 19.3% preoperatively to 72.3% ± 21.0% at the final follow-up ( P < .001). The WOSI score of patients in zone 4 (peripheral-track lesion) (n = 10) was significantly lower than those in the other zones (central-track lesion) ( P = .0379). Of the 10 patients with the peripheral-track lesion, 5 had a Conclusion: Patients with on-track lesions can be divided into 2 subgroups: those with the Hill-Sachs occupancy ≥75% (peripheral-track lesion) showed significantly worse WOSI score without recurrent instability events than those with the Hill-Sacks occupancy

Background:It has been believed that a Hill-Sachs lesion (HSL) is created with the arm in abduction and external rotation at the time of dislocation. However, no studies have clarified the arm position in which an HSL is created.Purpose:To determine the arm position in which an HSL is created.Study Design:Descriptive laboratory study.Methods:The computed tomography images of 100 shoulders of 100 patients (72 males and 28 females; mean age, 30 years old) with recurrent anterior dislocation of the shoulder were investigated using an image analyzing software. Three-dimensional surface bone models of the scapula and humerus were created separately. The humerus was moved so that the HSL perfectly fit the anterior rim of the glenoid. This arm position was recorded 3-dimensionally.Results:Considering the scapulohumeral rhythm, the average arm position in which the HSL and the anterior glenoid rim best fit was 74° of abduction, 27° of external rotation, and 3° of horizontal flexion relative to the trunk.Conclusion:The arm position when an HSL and the anterior glenoid rim best fit is 74° of abduction, 27° of external rotation, and 3° of horizontal flexion, which seems to be the arm position when the HSL has been created. This result suggests 2 possibilities: dislocation occurred in this midrange position or HSL was not created at the time of dislocation but later in the mid–range of motion. However, as we have no information on the arm position at the time of dislocation, we cannot conclude which of these possibilities is true in our study.Clinical Relevance:This study gives us a better understanding of the timing of HSL occurrence. Shoulder dislocation may occur at the end range of motion or in the mid–range of motion, but an HSL is created in the mid–range of motion.

Background It remains unclear how the head and stem diameters for the radial head prosthesis could affect mechanical properties of the lateral collateral ligament measured by strain changes during elbow and forearm motions. Methods Eight cadaveric specimens were secured to the device, which allows elbow flexion-extension and forearm pro-supination. Using six different implant combinations comprising 2 sizes for the head (long- and short-axis of the native head) and 3 sizes for the stem (press-fit, −1 mm, and −2 mm downsizing), prostheses were attached via the posterior approach. A differential variable reluctance transducer placed on the central portion of the radial collateral ligament were used for strain measurement with elbow flexion at 0°, 30°, 60°, and 90°. At each position, the strain patterns with the forearm in the neutral and 45° pro-supination positions were also assessed. Findings Specimens implanted with long-axis head component showed greater increases in the ligament strain during elbow flexion than intact specimens or those implanted with short-axis head. Compared to press-fit stem, implants with downsizing to −1 mm approximated strain patterns during pro-supination with elbow extension to intact condition. Interpretation Morphologic variation of the head and stem components in radial head prostheses led to altered strain patterns in the lateral collateral ligament during elbow and forearm motions. A short-axis head component can be used to prevent excessive strain changes after the prosthesis application. Downsizing of the stem component might be an option for approximating the biomechanics at the radiocapitellar joint during forearm rotation to the intact elbow.

Background It has been biomechanically demonstrated that 20% to 25% is a critical glenoid bone loss. Recently, there are several reports describing that a bone loss less than 20% to 25% needed to be treated because patients may have decreased quality of life without recurrent instability events. The purpose of this study was to clarify the presence of subcritical bone loss that would affect postoperative instability or quality of life. Methods Subjects were 43 patients aged ≤ 40 years with less than 25% glenoid bone loss who had undergone arthroscopic Bankart repair. These patients were assessed at a mean follow-up of 32 months. The Western Ontario Shoulder Instability (WOSI) and Rowe scores were used for the clinical evaluation. Patients were divided in 3 groups based on the percentage of bone loss: group 1: 17%. Results The recurrence rate was 7% (3/43 shoulders). A weak negative correlation was seen between bone loss and sports/recreation/work domain of the WOSI score (r = −0.304, p = 0.0191). The WOSI for group 3 was significantly lower than that for group 1 and 2 (p = 0.0009). The male WOSI scores were significantly lower than the female ones (p = 0.0471). The WOSI scores of the contact athletes were significantly lower than those of non-contact athletes (p = 0.0275). All the patients in Group 3 were males and participated in contact sports. Conclusion Glenoid bone loss between 17% and 25% is considered to be a “subcritical bone loss” in our series, especially in male patients who are involved in sports or high-level activities. Level of evidence III, retrospective study.

Background Several measurement techniques have been reported to quantify glenoid bone defect in patients with anterior shoulder instability. Among them, the method that uses a best-fit circle and another that uses the contralateral glenoid as a control are most commonly used. However, to our knowledge, no study has been reported that compared the reliability of these methods. The purpose of this study, therefore, was to determine which of these methods has higher reproducibility. Method In this study, 3-dimensional computed tomography data from 94 patients (mean age 29 years) with unilateral anterior shoulder instability were used. Three examiners measured the glenoid bone defect of each patient 3 times using 2 techniques: the best-fit circle method and the contralateral comparison method. Intra- and interobserver reliabilities were measured using intraclass correlation coefficient (ICC). Results The intraobserver reliability was found to be 0.91 for the best-fit circle method and 0.98 for the contralateral comparison method. The interobserver reliability was 0.77 for the best-fit circle method and 0.88 for the contralateral method. The percentage of glenoid defect was 11.5% when using the best-fit circle and 10.7% with the contralateral method. Conclusion The contralateral comparison method was more reliable than the best-fit circle method for quantifying the amount of glenoid bone loss.

Background A torn rotator cuff tendon will retract over time causing changes in muscle properties and decreasing its extensibility, or deformation. During surgery, large tensile loads are applied to bring the torn tendon to the footprint. Poor muscle extensibility and large tensile stresses at the repair might lead to gap formation or re-tear of the repair. A quantitative evaluation of muscle properties could be used to predict the extensibility of the supraspinatus (SSP) muscle. Method Magnetic resonance imaging (MRI)-measured volumetric fat fraction and shear wave elastography (SWE)-measured elastic modulus of the SSP muscle were obtained on seventeen cadaveric shoulders. Experimental extensibility and stiffness were then measured by axially pulling the tendon up-to 60 N. Univariate and multivariate analyses were used to determine the correlation and contribution of fat fraction and elastic modulus to experimental outcomes. Findings SWE moduli negatively correlated with SSP muscle extensibility (r = 0.54–0.58, P ≤ 0.0259); fat fraction resulted in a positive correlation (r = 0.69, P = 0.0021). SWE measurements, solely, explained up to 34% and 33% of the variability in measured extensibility and stiffness, respectively. Fat Fraction, solely, explained 48% of the variability in extensibility and 36% of the variability in stiffness. These methods combined predicted up to 62% of the musculotendinous extensibility. Interpretation This study showed a comprehensive quantitative assessment of SSP muscle properties using SWE to estimate stiffness and MRI to measure fatty infiltration. The extensibility of the detached muscle/tendon unit was highly correlated to material properties of the muscle when these methods were used in combination.

Background: Shoulder dislocation often recurs, especially in the younger population. Immobilization in external rotation, in which a Bankart lesion is displaced in the anterior, medial, and inferior directions, was introduced as a new method of nonoperative treatment, but its clinical efficiency is controversial. In terms of reducing the lesion, it is reasonable to incorporate not only external rotation, which makes the anterior soft tissues tight to push the lesion posteriorly and laterally, but also abduction, which makes the inferior soft tissues tight to push the lesion superiorly. Hypothesis: Abducting the arm during immobilization in external rotation will improve the reduction of a Bankart lesion. Study Design: Controlled laboratory study. Methods: There were 37 patients with initial shoulder dislocation enrolled in this study. After reduction, MRI was taken in 4 positions of the shoulder: adduction and internal rotation (Add-IR), adduction and external rotation (Add-ER), 30° of abduction and 30° of external rotation (Abd-30ER), and 30° of abduction and 60° of external rotation (Abd-60ER). On radial slices, the separation, displacement of the labrum, and opening angle of the capsule were measured. Results: Add-ER improved the reduction of the anterior labrum but not the inferior labrum when compared with Add-IR. Both Abd-30ER and Abd-60ER improved the reduction of the inferior labrum as compared with Add-IR. Furthermore, Abd-60ER improved the reduction more than Add-ER. Conclusion: Among the 4 positions tested, Abd-60ER is the best position in terms of reducing the Bankart lesion. Clinical Relevance: Abducting the shoulder during immobilization in external rotation is demonstrated to improve the reduction of the Bankart lesion. Therefore, this position is expected to reduce the recurrence rate after initial dislocation of the shoulder. Future clinical trials are necessary.

Surgical repair for large rotator cuff tear remains challenging due to tear size, altered muscle mechanical properties, and poor musculotendinous extensibility. Insufficient extensibility might lead to an incomplete reconstruction; moreover, excessive stresses after repair may result in repair failure without healing. Therefore, estimates of extensibility of cuff muscles can help in pre-surgical planning to prevent unexpected scenarios during surgery. The purpose of this study was to determine if quantified mechanical properties of the supraspinatus muscle using shear wave elastography (SWE) could be used to predict the extensibility of the musculotendionous unit on cadaveric specimens. Forty-five fresh-frozen cadaveric shoulders (25 intact and 20 with rotator cuff tear) were used for the study. Passive stiffness of 4 anatomical regions in the supraspinatus muscle was first measured using SWE. After detaching the distal edge of supraspinatus muscle from other cuff muscles, the detached muscle was axially pulled with the scapula fixed. The correlation between the SWE modulus and the extensibility of the muscle under 30 and 60 N loads was assessed. There was a significant negative correlation between SWE measurements and the experimental extensibility. SWE modulus for the anterior-deep region in the supraspinatus muscle showed the strongest correlation with extensibility under 30 N (r = 0.70, P < 0.001) and 60 N (r = 0.68, P < 0.001). Quantitative SWE assessment for the supraspinatus muscle was highly correlated with extensibility of musculotendinous unit on cadaveric shoulders. This technique may be used to predict the extensibility for rotator cuff tears for pre-surgical planning.

Introduction: Rotator cuff (RC) tears result in muscle atrophy and fat infiltration within the RC muscles. An estimation of muscle quality and deformation, or extensibility, is useful in selecting the most appropriate surgical procedure. We determined if non-invasive quantitative assessment of intramuscular fat using MRI could be used to predict extensibility of the supraspinatus (SSP) muscle. Methods: Seventeen cadaveric shoulders were imaged to assess intramuscular fat infiltration. Extensibility and histological evaluations were then performed. Results: Quantitative fat infiltration positively correlated with histological findings and presented a positive correlation with muscle extensibility (r = 0.69; p = 0.002). Extensibility was not significantly different between shoulders graded with a higher fat content vs. those with low fat when implementing qualitative methods. Discussion: A non-invasive prediction of whole-muscle extensibility may directly guide pre-operative planning to determine if the torn edge could efficiently cover the original footprint while aiding in postoperative evaluation of RC repair. This article is protected by copyright. All rights reserved.

Severe glenoid bone loss remains a challenge in patients requiring shoulder arthroplasty and may necessitate glenoid bone grafting. The purpose of this study was to determine results, complications, and rates of failure of glenoid bone grafting in primary reverse shoulder arthroplasty.Forty-one shoulders that underwent primary reverse arthroplasty between 2006 and 2013 with a minimum follow-up of 2 years (mean, 2.8 years; range, 2-6 years) were reviewed. Thirty-four (83%) received corticocancellous grafts and 7 (17%) structural grafts.Active range of motion and pain levels were significantly improved (P .001), with mean American Shoulder and Elbow Surgeons score of 77, Simple Shoulder Test score of 9, and patient satisfaction of 93% at the most recent follow-up. Preoperative severe glenoid erosion and increasing body mass index were significantly associated with worse American Shoulder and Elbow Surgeons scores (P = .04). On radiographic evaluation, 7 patients (18%) had grade 1 or grade 2 glenoid lucency. Glenoid bone graft incorporation was observed in 31 patients (78%). Twelve patients (30%) suffered from grade 1 or grade 2 scapular notching. All of the patients with structural grafts showed graft incorporation and no signs of glenoid lucency.Although glenoid lucency, glenoid graft resorption, and scapular notching were present at short-term to midterm follow-up, none of the patients needed revision surgery. Primary reverse shoulder arthroplasty with glenoid reconstruction using bone graft relieved pain and restored shoulder function and stability.

Background The purpose of this study was to determine the risk of periprosthetic infection after primary shoulder arthroplasty (SA) in patients undergoing previous nonarthroplasty shoulder surgery compared with those without previous surgery. Materials and methods All patients undergoing primary SA at our institution between 1970 and 2012 were included in this study. The cohort consisted of 4577 patients treated with 2890 total SAs, 1233 hemiarthroplasties, and 454 reverse SAs; 813 (18%) patients had undergone prior nonarthroplasty shoulder surgery on the operative side. Patients with and without previous surgery were compared for postoperative periprosthetic infection. Univariate and multivariable analyses were used. Results Deep postoperative infection of the shoulder was diagnosed in 68 patients (1.49%). Of the 813 patients who had undergone previous surgery, 20 (2.46%) developed a deep postoperative infection. However, of the 3764 patients who did not have previous shoulder surgery, 48 patients (1.28%) sustained deep shoulder infection. This difference was significant in both the univariate ( P = .0094) and multivariate analyses ( P = .0390). In addition, older age and female gender were significantly associated with a lower risk of deep postoperative infection ( P = .0150 and P = .0074, respectively). A higher number of previous surgeries was also significantly associated with an increased risk of deep postoperative infection ( P = .0272). Conclusions The risk of infection after primary SA is significantly higher in patients with a history of prior non–arthroplasty-related surgery. This finding should be discussed with the patients before their surgery, and potential preoperative and intraoperative workup should be undertaken to identify at-risk patients.

Background The purpose of this study was to examine the effect of smoking on the incidence of complications after primary anatomic total shoulder arthroplasty (TSA) and reverse shoulder arthroplasty (RSA). Methods All patients who underwent primary TSA or RSA at our institution between 2002 and 2011 and had a minimum 2-year follow-up were included. Smoking status was assessed at the time of surgery. Current smokers, former smokers, and nonsmokers were compared for periprosthetic infection, fractures (intraoperative and postoperative), and loosening after surgery. Results The cohort included 1834 shoulders in 1614 patients (814 in smokers and 1020 in nonsmokers). Complications occurred in 73 patients (75 shoulders; 44 in smokers and 31 in nonsmokers). There were 20 periprosthetic infections (16 in smokers and 4 in nonsmokers), 27 periprosthetic fractures (14 in smokers and 13 in nonsmokers), and 28 loosenings (14 in smokers and 14 in nonsmokers). Smokers had lower periprosthetic infection-free survival rates (95.3%-99.4% at 10 years; P = .001) and overall complication-free survival rates (78.4%-90.2%; P = .012) than nonsmokers. Multivariable analyses showed that both current and former smokers had significantly higher risk of periprosthetic infection in comparison with nonsmokers (hazard ratio [HR], 7.27 and 4.56, respectively). In addition, current smokers showed a higher risk of postoperative fractures than both former smokers (HR, 3.63) and nonsmokers (HR, 6.99). Conclusions This study demonstrates that smoking is a significant risk factor of complications after TSA and RSA. These findings emphasize the need for preoperative collaborative interventions, including smoking cessation programs.

Background Shoulder external rotation braces used for patients with a first-time shoulder dislocation are designed with a variety of arm positions in abduction as well as external rotation. However, few studies have focused on their immobilizing performance, comfort, or user-friendliness. Especially, there have been no robust data of shoulder abduction-external rotation (A-ER) braces in comparison to those of external rotation (ER) braces. Methods Four types of commercially available shoulder braces (two ER and two A-ER braces) were tested in 30 healthy participants. The angles of external rotation and abduction were measured for each brace at initial application, after simulated daily activities, and after reapplication. Then, subjects were asked to assess the discomfort of bracing and difficulty of reapplication using a visual analogue scale. Data were compared between the two ER braces and two A-ER braces as well as among the four braces. Results For both external rotation angle and subjective assessment, there were no significant differences between the ER and A-ER braces. Among the four braces, the measurement of arm position demonstrated no significant differences, except the external rotation angles between the two ER braces. The A-ER braces were assessed to be significantly less comfortable than the ER braces in the subjective assessment. Conclusions Immobilization using the A-ER braces could maintain the arm position in abduction-external rotation with comparable user-friendliness, although they tended to be less comfortable during daily activities compared to the ER braces.

The deltoid muscle plays a critical role in the biomechanics of shoulders undergoing reverse shoulder arthroplasty (RSA). However, both pre- and postoperative assessment of the deltoid muscle quality still remains challenging. The purposes of this study were to establish a novel methodology of shear wave elastography (SWE) to quantify the mechanical properties of the deltoid muscle, and to investigate the reliability of this technique using cadaveric shoulders for the purpose of RSA. Eight fresh-frozen cadaveric shoulders were obtained. The deltoid muscles were divided into 5 segments (A1, A2, M, P1 and P2) according to the muscle fiber orientation and SWE values were measured for each segment. Intra- and inter-observer reliability was evaluated using intraclass correlation coefficient (ICC). To measure the response of muscle tension during RSA, the humeral shaft was osteotomized and subsequently elongated by an external fixator (intact to 15 mm elongation). SWE of the deltoid muscle was measured under each stretch condition. Intra- and inter-observer reliability of SWE measurements for all regions showed 0.761-0.963 and 0.718-0.947 for ICC(2,1). Especially, SWE measurements for segments A2 and M presented satisfactory repeatability. Elongated deltoid muscles by the external fixator showed a progressive increase in passive stiffness for all muscular segments. Especially, SWE outcomes of segments A2 and M reliably showed an exponential growth upon stretching (R2 = 0.558 and 0.593). Segmental measurements using SWE could be reliably and feasibly used to quantitatively assess the mechanical properties of the deltoid muscle, especially in the anterior and middle portions. This novel technique based on the anatomical features may provide helpful information of the deltoid muscle properties during treatment of RSA.

Few randomized trials have shown how the placement of a palmar locking plate affects outcomes. The purpose of this study was to compare clinical and radiological outcomes of fixation using locking plates with different concepts for placement relative to the watershed line in a prospective randomized trial. Sixty-four patients with a displaced distal radius fracture were divided into two groups according to the plates used for fixation: distal-type (AcuLocTM, Group A) and proximal-type (VariAxTM, Group V). Wrist function including the range of motion and grip strength was compared at 1, 2, 3 and 6 months postoperatively. Loss of reduction was assessed radiologically. Both groups demonstrated overall satisfactory function at 6 months with no significant difference found between the groups. Minimal loss of reduction was demonstrated in both groups. Internal fixation using the palmar locking plates with two different placements provided satisfactory outcomes at 6-month follow-up, but our results indicate that plates placed distal to the watershed line may delay recovery of wrist motion.

Ultrasound imaging has been used to evaluate various shoulder pathologies, whereas, quantification of the rotator cuff muscle stiffness using shear wave elastography (SWE) has not been verified. The purpose of this study was to investigate the reliability and feasibility of SWE measurements for the quantification of supraspinatus (SSP) muscle elasticity. Thirty cadaveric shoulders (18 intact and 12 with torn rotator cuff) were used. Intra- and inter-observer reliability was evaluated on an established SWE technique for measuring the SSP muscle elasticity. To assess the effect of overlying soft tissues above the SSP muscle, SWE values were measured with the transducer placed on the skin, on the subcutaneous fat after removing the skin, on the trapezius muscle after removing the subcutaneous fat, and directly on the SSP muscle. In addition, SWE measurements on 4 shoulder positions (0°, 30°, 60°, and 90° abduction) were compared in those with/without rotator cuff tears. Intra- and inter-observer reliability of SWE measurements were excellent for all regions in SSP muscle. Also, removing the overlying soft tissue showed no significant difference on SWE values measured in the SSP muscle. The SSP muscle with 0° abduction showed large SWE values, whereas, shoulders with large-massive tear showed smaller variation throughout the adduction-abduction positions. SWE is a reliable and feasible tool for quantitatively assessing the SSP muscle elasticity. This study also presented SWE measurements on the SSP muscle under various shoulder abduction positions which might help characterize patterns in accordance to the size of rotator cuff tears.

The purpose of this study was to investigate the association between acromioclavicular (AC) joint pain and superior capsular bulging assessed by ultrasound in adolescent baseball players.One hundred and fifty players (1st-8th graders) were examined. All subjects underwent physical examinations, including assessment of tenderness on the AC joint and provocative tests (the Buchberger's test and the cross-body adduction stress test). Bilateral AC joints with the arm in both the resting and the cross-body positions were examined by ultrasound.Twelve of 150 players (8 %) had AC symptoms with both positive tenderness and positive provocative tests. Interestingly, their prevalence increased with age-one of the 70 (1.4 %) 1st-3rd graders, six of 46 (13 %) 4th-6th graders and five of 34 (15 %) 7th-8th graders. Ultrasonography of AC joints in the cross-body position showed that the difference in superior capsular bulging between the throwing and non-throwing sides was significantly greater in symptomatic players (1.6 ± 1.2 mm) than in asymptomatic players (0.2 ± 0.8 mm) (p = 0.002).The prevalence of superior capsular bulging was significantly higher in adolescent baseball players with AC joint pain than in those without it. In adolescent baseball players with shoulder pain, AC joint symptoms should be considered amongst potential causes. Careful observation of these patients is suggested in cases of superior capsular bulging of the AC joint as determined by ultrasonography.III.

There are 2 representative shapes of full-thickness rotator cuff tears commonly observed: crescent-shaped and L-shaped tears. To date, the exact process of tear propagation in each shape remains unknown.To determine the stress distribution pattern in rotator cuff tendons with a crescent-shaped tear and an L-shaped tear.Descriptive laboratory study.The computed tomography (CT) data of a normal cadaveric shoulder from a 69-year-old man were used to develop a 3-dimensional finite element model of the rotator cuff tendons. Three different sizes (1.0-, 2.0-, and 3.0-cm widths) of crescent-shaped and L-shaped tears were created. Tensile load was applied to each cuff tendon that simulated shoulder abduction and external rotation in the hanging-arm position. Elastic analysis was performed, and distribution of the von Mises equivalent stress was calculated. Then, the stress distribution pattern was compared between the 2 tear shapes and among the 3 different tear sizes.In the crescent-shaped tear models, stress concentration was seen in both the anterior and the posterior edges of the torn tendon stump. In the L-shaped tear models, stress concentration was seen in the posterior torn tendon edge as well as the bottom of the longitudinal tear. The areas with high stress concentration increased with increasing tear size. At the posterior torn tendon edge, a common site of delamination, the articular half represented a higher equivalent stress than the bursal half in all models. The highest equivalent stress increased with an increase in tear size for both the abduction and the external rotation loads.A high stress concentration was seen in both the anterior and the posterior tendon edge in crescent-shaped tears and in both the posterior tendon edge and the bottom of the longitudinal tear in L-shaped tears. Stress concentration inside the tendon increased with increasing tear size.Crescent-shaped tears may propagate in the anterior and posterior directions, whereas L-shaped tears may propagate in the posterior and medial directions. Tear propagation may accelerate with an increase in tear size.

Although the margin convergence (MC) technique has been recognized as an option for rotator cuff repair, little is known about the biomechanical effect on repaired rotator cuff muscle, especially after supplemented footprint repair. The purpose of this study was to assess the passive stiffness changes of the supraspinatus (SSP) muscle after MC techniques using shear wave elastography (SWE). A 30 × 40-mm U-shaped rotator cuff tear was created in 8 cadaveric shoulders. Each specimen was repaired with 6 types of MC technique (1-, 2-, 3-suture MC with/without footprint repair, in a random order) at 30° glenohumeral abduction. Passive stiffness of four anatomical regions in the SSP muscle was measured based on an established SWE method. Data were obtained from the SSP muscle at 0° abduction under 8 different conditions: intact (before making a tear), torn, and postoperative conditions with 6 techniques. MC techniques using 1-, or 2-suture combined with footprint repair showed significantly higher stiffness values than the intact condition. Passive stiffness of the SSP muscle was highest after a 1-suture MC with footprint repair for all regions when compared among all repair procedures. There was no significant difference between the intact condition and a 3-suture MC with footprint repair. MC techniques with single stitch and subsequent footprint repair may have adverse effects on muscle properties and tensile loading on repair, increasing the risk of retear of repairs. Adding more MC stitches could reverse these adverse effects.

It has not been fully clarified yet how degenerative changes occur within the acromioclavicular (AC) joint, including their localizations. The aim of this study was to clarify the localization of degenerative changes in the AC joint using cadaveric specimens. Thirty-eight cadaveric AC joints with the sections were cut in the coronal plane. For both the acromion and the clavicle, the joint surface was divided into upper and lower halves. Histological features including the mean thickness of cartilage, reduction of proteoglycan staining and the extent of damaged tidemark were evaluated. The shapes of intraarticular discs as well as their histological structures were also assessed, which were compared between the upper and lower halves. Articular cartilage in the lower half was significantly thinner than that in the upper half for both the acromion and the clavicle (p

Myositis ossificans of the rotator cuff muscle is a very rare condition and its pathology is poorly understood. Although several radiological findings characterizing this condition have been reported in the literature, making a definite diagnosis is sometimes difficult without histological examination. We report a case of a 52-year-old female with myositis ossificans arising in the supraspinatus muscle with histological findings from the biopsy specimen. The patient was informed that her data would be submitted for publication, and gave consent.

The Western Ontario Shoulder Instability Index (WOSI) questionnaire is a disease-specific self-evaluated measurement tool used for patients with shoulder instability. The purpose of this study was to evaluate the reliability and validity of the WOSI Japanese version for the Japanese population.The WOSI Japanese version was prepared by use of several steps including translation, back translation, and verification by the author and owner of the WOSI. Reliability (internal consistency and reproducibility) and validity were then tested for 85 patients with shoulder instability. All patients completed the WOSI Japanese version, Quick DASH, and SF-36, and underwent assessment of the Rowe rating scale for the purpose of internal consistency and validity. Fifty-nine of the patients repeated the WOSI 2 weeks after the first examination for assessment of test-retest reproducibility.Both internal consistency (0.84 for Cronbach's alpha) and reproducibility (Pearson's r = 0.91, intraclass correlation coefficient = 0.91) indicated the reliability of the WOSI Japanese questionnaire was good. Comparison with the Rowe rating scale (p0.001) also showed validity was good. The correlation coefficient between the WOSI Japanese version and the Quick DASH (Pearson's r = 0.62) was higher than that between the WOSI Japanese version and the SF-36 (Pearson's r = 0.10-0.36 for subscales).The WOSI Japanese questionnaire is a reliable self-assessment tool that is comparable with the original English version. We therefore recommend use of the WOSI Japanese version when evaluating patients with shoulder instability in the Japanese population.