Search

Patients with Coronavirus-associated disease-2019 (COVID-19) display alterations of the hemostatic system and the presence of a prothrombotic status frequently leading to vascular complications. However, the impact of COVID-19 on platelet activity, aggregation and agglutination still needs to be clarified. We measured total levels of von Willebrand factor (vWF) and vWF binding to the platelet glycoprotein (Gp) complex (GPIb-IX-V), in a cohort of COVID-19 patients admitted to the intensive care unit of our Institution. Moreover, we evaluated platelet aggregation in response to agonists (ADP, collagen, arachidonic acid) and platelet agglutination in response to ristocetin. We found that levels of vWF antigen and the active form of vWF binding to platelets (vWF:RCo), were markedly increased in these patients. These results were associated with higher agglutination rates induced by ristocetin, thereby indirectly indicating an increased capability of vWF to bind to platelets. Conversely, we found that platelet aggregation in response to both ADP and collagen was lower in COVID-19 patients compared to healthy volunteers. This study shows that COVID-19 is associated with increased vWF-induced platelet agglutination but reduced platelet responsivity to aggregation stimuli. Our findings have translational relevance since platelet adhesion to vWF may represent a marker to predict possible complications and better delineate therapeutic strategies in COVID-19 patients. Electronic Supplementary Material The online version of this article (10.1007/s11239-020-02339-6) contains supplementary material, which is available to authorized users.

Background Patients with coronavirus disease 2019 (Covid-19) may experience venous thrombosis while data regarding arterial thrombosis are sparse. Methods Prospective multicenter study in 5 hospitals including 373 patients with Covid-19-related pneumonia. Demographic data, laboratory findings including coagulation tests and comorbidities were reported. During the follow-up any arterial or venous thrombotic events and death were registered. Results Among 373 patients, 75 (20%) had a thrombotic event and 75 (20%) died. Thrombotic events included 41 venous thromboembolism and 34 arterial thrombosis. Age, cardiovascular disease, intensive care unit treatment, white blood cells, D-dimer, albumin and troponin blood levels were associated with thrombotic events. In a multivariable regression logistic model, intensive care unit treatment (Odds Ratio [OR]: 6.0; 95% Confidence Interval [CI] 2.8–12.6; p p = 0.022); and albumin levels (OR: 0.49; 95% CI 0.28–0.87; p = 0.014) were associated with ischemic events. Age, sex, chronic obstructive pulmonary disease, diabetes, heart failure, coronary heart disease, intensive care unit treatment, in-hospital thrombotic events, D-dimer, C-reactive protein, troponin, and albumin levels were associated with mortality. A multivariable Cox regression analysis showed that in-hospital thrombotic events (hazard ratio [HR]: 2.72; 95% CI 1.59–4.65; p p = 0.001), and albumin (HR: 0.447; 95% CI 0.277–0.723; p = 0.001) predicted morality. Conclusions Covid-19 patients experience an equipollent rate of venous and arterial thrombotic events, that are associated with poor survival. Early identification and appropriate treatment of Covid-19 patients at risk of thrombosis may improve prognosis.

Short-term mortality risk in young diabetic people is an indicator of quality of care. We assessed this in the Italian incident population-based registry of Turin. The study base included 1210 incident cases (n = 677 aged 0–14 years and n = 533 aged 15–29 years) with diabetes, onset period 1974–2000 in the Province of Turin, Italy. The relevant timescale for analysis was the time since the onset of diabetes to death, or till 31 December 2003. Standardized mortality ratio (SMR) for all-cause mortality was computed using the Italian population as a standard, by 5 years, age group, sex, and calendar period. Mean attained age of the incident cohort was 29.7 years (range 5.2–49.7 years). During a mean follow-up period of 15.8 years (range 2.0–29.9 years), there were 19 deaths in 15,967. Nine person-years of observation (n = 9.5 expected deaths), giving an all-cause mortality rate of 1.19/1000 person-years (95% CI 0.76–1.87) and an SMR of 1.96 (1.25–3.08). In no cases did death occur at the onset of diabetes or in childhood. Out of 19 deaths, 9 were diabetes related (n = 6 coma and n = 3 end-stage renal disease). In Cox regression analysis, the hazard ratio (HR) was higher in adult-onset than in childhood-onset diabetes (HR = 3.90, 95% CI 1.14–13.39), independently of calendar period and gender. (1) Children and young adults with type 1 diabetes experienced a two-fold higher short-term mortality risk than Italian people of similar age and sex and (2) the risk was higher in adult-onset than in childhood-onset diabetes. The quality of diabetes care should be improved to prevent early deaths.

The effects of a 0.5 g/kg body weight arginine infusion on plasma inorganic phosphates and potassium were examined in nineteen normal subjects. Plasma phosphorus displayed a highly significant (p less than 0.001) fall with a maximum depression below baseline of 1.11 +/- 0.15 mg/100 ml or 33 +/- 3% (mean +/- SEM); there was a significant correlation (p less than 0.01) between this fall and the insulin peaks induced by arginine. Plasma potassium levels displayed a distinct and significant increase in eleven of the twelve subjects studied; the maximum increase above baseline was 1.02 +/- 0.14 mEq/1 or 27 +/- 4.5% (p less than 0.001). No change occurred in blood pH values determined in four subjects. In six normal subjects, the test was repeated with the addition of somatostatin (250 micrograms bolus, followed by 500 micrograms/hr), which abolished the insulin and growth hormone response to arginine. It also abolished the fall in plasma phosphorus but appeared (if anything) to augment the increase in potassium. These findings show that arginine is responsible for a fall in plasma phosphorus related to the insulin response, and for an increase in plasma potassium of clinical significance, the mechanism(s) of which, however, are still obscure.

Background During the first coronavirus disease 2019 (COVID-19) pandemic wave, an unprecedented number of patients with respiratory failure due to a new, highly contagious virus needed hospitalization and intensive care unit (ICU) admission. The aim of the present study was to describe the communication and visiting policies of Italian intensive care units (ICUs) during the first COVID-19 pandemic wave and national lockdown and compare these data with prepandemic conditions. Methods A national web-based survey was conducted among 290 Italian hospitals. Each ICU (active between February 24 and May 31, 2020) was encouraged to complete an individual questionnaire inquiring the hospital/ICU structure/organization, communication/visiting habits and the role of clinical psychology prior to, and during the first COVID-19 pandemic wave. Results Two hundred and nine ICUs from 154 hospitals (53% of the contacted hospitals) completed the survey (202 adult and 7 pediatric ICUs). Among adult ICUs, 60% were dedicated to COVID-19 patients, 21% were dedicated to patients without COVID-19 and 19% were dedicated to both categories (Mixed). A total of 11,102 adult patients were admitted to the participating ICUs during the study period and only approximately 6% of patients received at least one visit. Communication with family members was guaranteed daily through an increased use of electronic devices and was preferentially addressed to the same family member. Compared to the prepandemic period, clinical psychologists supported physicians more often regarding communication with family members. Fewer patients received at least one visit from family members in COVID and mixed-ICUs than in non-COVID ICUs, l (0 [0–6]%, 0 [0–4]% and 11 [2–25]%, respectively, p Conclusions Visiting policies of Italian ICUs dedicated to adult patients were markedly altered during the first COVID-19 wave. Remote communication was widely adopted as a surrogate for family meetings. New strategies to favor a family-centered approach during the current and future pandemics are warranted.

We hypothesize that variations of body anthropometry, conjointly with the bone strength, determine the risk of hip fracture. To test the hypothesis, we compared, in a simulated sideways fall, the hip impact energy to the energy needed to fracture the femur. Ten femurs from elderly donors were tested using a novel drop-tower protocol for replicating the hip fracture dynamics during a fall on the side. The impact energy was varied for each femur according to the donor’s body weight, height and soft-tissue thickness, by adjusting the drop height and mass. The fracture pattern, force, energy, strain in the superior femoral neck, bone morphology and microarchitecture were evaluated. Fracture patterns were consistent with clinically relevant hip fractures, and the superior neck strains and timings were comparable with the literature. The hip impact energy (11 – 95 J) and the fracture energy (11 – 39 J) ranges overlapped and showed comparable variance (CV = 69 and 61%, respectively). The aBMD-based definition of osteoporosis correctly classified 7 (70%) fracture/non-fracture cases. The incorrectly classified cases presented large impact energy variations, morphology variations and large subcortical voids as seen in microcomputed tomography. In conclusion, the risk of osteoporotic hip fracture in a sideways fall depends on both body anthropometry and bone strength.

Although the prognosis of patients with localized prostate cancer is good after surgery, with a favorable response to androgen deprivation therapy, about one third of them invariably relapse, and progress to castration-resistant prostate cancer. Overall, prostate cancer therapies remain scarcely effective, thus it is mandatory to devise alternative treatments enhancing the efficacy of surgical castration and hormone administration. Dysregulation of the phosphoinositide 3-kinase pathway has attracted growing attention in prostate cancer due to the highly frequent association of epigenetic and post-translational modifications as well as to genetic alterations of both phosphoinositide 3-kinase and PTEN to onset and/or progression of this malignancy, and to resistance to canonical androgen-deprivation therapy. Here we provide a summary of the biological functions of the major players of this cascade and their deregulation in prostate cancer, summarizing the results of preclinical and clinical studies with PI3K signaling inhibitors and the reasons of failure independent from genomic changes.

Background The effect of tibiofemoral geometry on musculoskeletal function is important to movement biomechanics. Research question We hypothesised that tibiofemoral geometry determines tibiofemoral motion and musculoskeletal function. We then aimed at 1) modelling tibiofemoral motion during normal activity as a function of tibiofemoral geometry in healthy adults; and 2) quantifying the effect of tibiofemoral geometry on musculoskeletal function. Methods We used motion data for six activity types and CT images of the knee from 12 healthy adults. Geometrical variation of the tibia and femoral articular surfaces were measured in the CT images. The geometry-based tibiofemoral motion was calculated by fitting a parallel mechanism to geometrical variation in the cohort. Matched musculoskeletal models embedding the geometry-based tibiofemoral joint motion and a common generic tibiofemoral motion of reference were generated and used to calculate joint angles, net joint moments, muscle and joint forces for the six activities analysed. The tibiofemoral model was validated against bi-planar fluoroscopy measurements for walking for all the six planes of motion. The effect of tibiofemoral geometry on musculoskeletal function was the difference between the geometry-based model and the model of reference. Results The geometry-based tibiofemoral motion described the pattern and the variation during walking for all six motion components, except the pattern of anterior tibial translation. Tibiofemoral geometry had moderate effect on cohort-averages of musculoskeletal function (R2 = 0.60–1), although its effect was high in specific instances of the model, outputs and activities analysed, reaching 2.94 BW for the ankle reaction force during stair descent. In conclusion, tibiofemoral geometry is a major determinant of tibiofemoral motion during walking. Significance Geometrical variations of the tibiofemoral joint are important for studying musculoskeletal function during normal activity in specific individuals but not for studying cohort averages of musculoskeletal function. This finding expands current knowledge of movement biomechanics.

OBJECTIVES: Autophagy is a physiological and highly regulated mechanism, crucial for cell homeostasis maintenance. Its impairment seems to be involved in the onset of several diseases, including muscular dystrophies, myopathies and sarcopenia. According to few papers, chemotherapeutic drug treatment is able to trigger side effects on skeletal muscle tissue and, among these, a defective autophagic activation, which leads to the persistence of abnormal organelles within cells and, finally, to myofiber degeneration. The aim of this work is to find a strategy, based on diet modulation, to prevent etoposide-induced damage, in a model of in vitro skeletal muscle cells. METHODS: Glutamine supplementation and nutrient deprivation have been chosen as pre-treatments to counteract etoposide effect, a chemotherapeutic drug known to induce oxidative stress and cell death. Cell response has been evaluated by means of morpho-functional, cytofluorimetric and molecular analyses. RESULTS: Etoposide treated cells, if compared to control, showed dysfunctional mitochondria presence, ER stress and lysosomal compartment damage, confirmed by molecular investigations. CONCLUSIONS: Interestingly, both dietary approaches were able to rescue myofiber from etoposide-induced damage. Glutamine supplementation, in particular, seemed to be a good strategy to preserve cell ultrastructure and functionality, by preventing the autophagic impairment and partially restoring the normal lysosomal activity, thus maintaining skeletal muscle homeostasis. ispartof: JOURNAL OF NUTRITION HEALTH & AGING vol:23 issue:8 pages:739-745 ispartof: location:France status: published

Clusterin (CLU) is a chaperone-like protein with multiple functions. sCLU is frequently upregulated in prostate tumor cells after chemo- or radiotherapy and after surgical or pharmacological castration. Moreover, CLU has been documented to modulate the cellular homolog of murine thymoma virus akt8 oncogene (AKT) activity. Here, we investigated how CLU overexpression influences phosphatidylinositol 3'-kinase (PI3K)/AKT signaling in human normal and cancer epithelial prostate cells. Human prostate cells stably transfected with CLU were broadly profiled by reverse phase protein array (RPPA), with particular emphasis on the PI3K/AKT pathway. The effect of CLU overexpression on normal and cancer cell motility was also tested. Our results clearly indicate that CLU overexpression enhances phosphorylation of AKT restricted to isoform 2. Mechanistically, this can be explained by the finding that the phosphatase PH domain leucine-rich repeat-containing protein phosphatase 1 (PHLPP1), known to dephosphorylate AKT2 at S474, is markedly downregulated by CLU, whereas miR-190, a negative regulator of PHLPP1, is upregulated. Moreover, we found that phosphatase and tensin homolog (PTEN) was heavily phosphorylated at the inhibitory site S380, contributing to the hyperactivation of AKT signaling. By keeping AKT2 phosphorylation high, CLU dramatically enhances the migratory behavior of prostate epithelial cell lines with different migratory and invasive phenotypes, namely prostate normal epithelial 1A (PNT1A) and prostatic carcinoma 3 (PC3) cells. Altogether, our results unravel for the first time a circuit by which CLU can switch a low migration phenotype toward a high migration phenotype, through miR-190-dependent downmodulation of PHLPP1 expression and, in turn, stabilization of AKT2 phosphorylation.

Comparing the available electromyography (EMG) and the related uncertainties with the space of muscle forces potentially driving the same motion can provide insights into understanding human motion in healthy and pathological neuromotor conditions. However, it is not clear how effective the available computational tools are in completely sample the possible muscle forces. In this study, we compared the effectiveness of Metabolica and the Null-Space algorithm at generating a comprehensive spectrum of possible muscle forces for a representative motion frame. The hip force peak during a selected walking trial was identified using a lower-limb musculoskeletal model. The joint moments, the muscle lever arms, and the muscle force constraints extracted from the model constituted the indeterminate equilibrium equation at the joints. Two spectra, each containing 200,000 muscle force samples, were calculated using Metabolica and the Null-Space algorithm. The full hip force range was calculated using optimization and compared with the hip force ranges derived from the Metabolica and the Null-Space spectra. The Metabolica spectrum spanned a much larger force range than the NS spectrum, reaching 811 N difference for the gluteus maximus intermediate bundle. The Metabolica hip force range exhibited a 0.3—0.4 BW error on the upper and lower boundaries of the full hip force range (3.4—11.3 BW), whereas the full range was imposed in the NS spectrum. The results suggest that Metabolica is well suited for exhaustively sample the spectrum of possible muscle recruitment strategy. Future studies will investigate the muscle force range in healthy and pathological neuromotor conditions.

The objective of this study was to quantify, in vivo, the reduction of knee laxity obtained by an extra-articular procedure, added to hamstring single-bundle (SB) anterior cruciate ligament (ACL) reconstruction in controlling coupled tibial translation during the Lachman and drawer tests. Twenty-eight patients were evaluated with a computer-assisted kinematic evaluation protocol; patients with associated ligament tears or meniscal damages were not included in the study. All patients underwent an hamstring ACL with an additional extra-articular procedure. During the intervention, tibia was tracked during the Lachman and drawer tests with ACL-deficient knee, after SB fixation and after extra-articular plasty fixation, performed with the remnant part of the hamstring tendons, from end of lateral condyle to Gerdy's tubercle. Statistical analysis was performed to see whether there was a difference in knee laxity after the tests in the three steps. At 30 degrees , the SB graft reduces AP translation of about 5 mm (P0.05) while the extra-articular procedure controls lateral tibial compartment, reducing translation by 1.6 mm (P0.05). At 90 degrees the SB graft reduces AP translation more in the lateral compartment (P0.05), while the extra-articular procedure contributes in controlling tibial translation reducing laxity by 1 mm (P0.05) in both compartments. Result shows that, in vivo, the addition of an extra-articular procedure to single-bundle ACL reconstruction may be effective in controlling coupled tibial translation during the Lachman test and reduces AP laxity at 90 degrees of flexion.

Model-based Roentgen Stereophotogrammetric Analysis (RSA) was recently developed for the measurement of prosthesis micromotion. Its main advantage is that markers do not need to be attached to the implants as traditional marker-based RSA requires. Model-based RSA has only been tested in uniplanar radiographic set-ups. A biplanar set-up would theoretically facilitate the pose estimation algorithm, since radiographic projections would show more different shape features of the implants than in uniplanar images. We tested the precision of model-based RSA and compared it with that of the traditional marker-based method in a biplanar set-up. Micromotions of both tibial and femoral components were measured with both the techniques from double examinations of patients participating in a clinical study. The results showed that in the biplanar set-up model-based RSA presents a homogeneous distribution of precision for all the translation directions, but an inhomogeneous error for rotations, especially internal-external rotation presented higher errors than rotations about the transverse and sagittal axes. Model-based RSA was less precise than the marker-based method, although the differences were not significant for the translations and rotations of the tibial component, with the exception of the internal-external rotations. For both prosthesis components the precisions of model-based RSA were below 0.2 mm for all the translations, and below 0.3 degrees for rotations about transverse and sagittal axes. These values are still acceptable for clinical studies aimed at evaluating total knee prosthesis micromotion. In a biplanar set-up model-based RSA is a valid alternative to traditional marker-based RSA where marking of the prosthesis is an enormous disadvantage.

Treating anterior cruciate ligament (ACL) lesions combined with a torn medial collateral ligament (MCL) is controversial because residual laxity may lead to stretching of the ACL graft and eventual failure of the reconstruction. Few studies describe the in vivo translations of combined ACL and MCL injuries. We compared the preoperative and postoperative laxity between patients with combined ACL+MCL Grade II injuries and isolated ACL ruptures and tested whether an ACL reconstruction could restore all laxities in both groups. We evaluated knee kinematics during ACL reconstruction in 57 patients (37 ACL lesions and 20 ACL+MCL injury). Laxity tests were performed before and after graft fixation. Postoperatively, there was greater anteroposterior laxity and greater varus-valgus laxity in the group with MCL injury compared to the group with an ACL lesion only. This finding suggests residual laxities remain when ACL reconstruction is performed in patients with combined ACL+MCL lesion, and raises the question of addressing the MCL ligament when Grade II laxity is found.

Spontaneous fractures (i.e. caused by sudden loading and muscle contraction, not by trauma) represent a significant percentage of proximal femur fractures. They are particularly relevant as may occur in elderly (osteoporotic) subjects, but also in relation to epiphyseal prostheses. Despite its clinical and legal relevance, this type of fracture has seldom been investigated. Studies concerning spontaneous fractures are based on a variety of loading scenarios. There is no evidence, nor consensus on the most relevant loading scenario. The aim of this work was to develop and validate an experimental method to replicate spontaneous fractures in vitro based on clinically relevant loading. Primary goals were: (i) repeatability and reproducibility, (ii) clinical relevance. A validated numerical model was used to identify the most critical loading scenario that can lead to head–neck fractures, and to determine if it is necessary to include muscle forces when the head–neck region is under investigation. The numerical model indicated that the most relevant loading scenario is when the resultant joint force is applied to the head at 81 from the diaphysis. Furthermore, it was found that it is not essential to include the muscles when investigating head–neck fractures. The experimental setup was consequently designed. The procedure included high-speed filming of the fracture event. Clinically relevant fracture modes were obtained on 10 cadaveric femurs. Failure load should be reported as a fraction of donor’s body-weight to reduce variability. The proposed method can be used to investigate the reason and mechanism of failure of natural and operated proximal femurs. r 2007 Elsevier Ltd. All rights reserved.

Subject-specific musculoskeletal models have become key tools in the clinical decision-making process. However, the sensitivity of the calculated solution to the unavoidable errors committed while deriving the model parameters from the available information is not fully understood. The aim of this study was to calculate the sensitivity of all the kinematics and kinetics variables to the inter-examiner uncertainty in the identification of the lower limb joint models. The study was based on the computer tomography of the entire lower-limb from a single donor and the motion capture from a body-matched volunteer. The hip, the knee and the ankle joint models were defined following the International Society of Biomechanics recommendations. Using a software interface, five expert anatomists identified on the donor's images the necessary bony locations five times with a three-day time interval. A detailed subject-specific musculoskeletal model was taken from an earlier study, and re-formulated to define the joint axes by inputting the necessary bony locations. Gait simulations were run using OpenSim within a Monte Carlo stochastic scheme, where the locations of the bony landmarks were varied randomly according to the estimated distributions. Trends for the joint angles, moments, and the muscle and joint forces did not substantially change after parameter perturbations. The highest variations were as follows: (a) 11 degrees calculated for the hip rotation angle, (b) 1% BW x H calculated for the knee moment and (c) 0.33 BW calculated for the ankle plantarflexor muscles and the ankle joint forces. In conclusion, the identification of the joint axes from clinical images is a robust procedure for human movement modelling and simulation.

The determination of the mechanical stresses induced in human bones is of great importance in both research and clinical practice. Since the stresses in bones cannot be measured non-invasively in vivo, the only way to estimate them is through subject-specific finite element modelling. Several methods exist for the automatic generation of these models from CT data, but before bringing them in the clinical practice it is necessary to assess their accuracy in the predictions of the bone stresses. Particular attention should be paid to those regions, like the epiphyseal and metaphyseal parts of long bones, where the automatic methods are typically less accurate. Aim of the present study was to implement a general procedure to automatically generate subject-specific finite element models of bones from CT data and estimate the accuracy of this general procedure by applying it to one real femur. This femur was tested in vitro under five different loading scenarios and the results of these tests were used to verify how the adoption of a simplified two-material homogeneous model would change the accuracy with respect to the density-based inhomogeneous one, with special attention paid to the epiphyseal and metaphyseal proximal regions of the bone. The results showed that the density-based inhomogeneous model predicts with a very good accuracy the measured stresses (R(2)=0.91, RMSE=8.6%, peak error=27%), while the two-material model was less accurate (R(2)=0.89, RMSE=9.6%, peak error=35%). The results showed that it is possible to automatically generate accurate finite element models of bones from CT data and that the strategy of material properties mapping has a significant influence on its accuracy.

There has been recent renewed interest in proximal femur epiphyseal replacement as an alternative to conventional total hip replacement. In many branches of engineering, risk analysis has proved to be an efficient tool for avoiding premature failures of innovative devices. An extensive risk analysis procedure has been developed for epiphyseal hip prostheses and the predictions of this method have been compared to the known clinical outcomes of a well-established contemporary design, namely hip resurfacing devices.Clinical scenarios leading to revision (i.e. loosening, neck fracture and failure of the prosthetic component) were associated with potential failure modes (i.e. overload, fatigue, wear, fibrotic tissue differentiation and bone remodelling). Driving parameters of the corresponding failure mode were identified together with their safe thresholds. For each failure mode, a failure criterion was identified and studied under the most relevant physiological loading conditions. All failure modes were investigated with the most suitable investigation tool, either numerical or experimental.Results showed a low risk for each failure scenario either in the immediate postoperative period or in the long term. These findings are in agreement with those reported by the majority of clinical studies for correctly implanted devices. Although further work is needed to confirm the predictions of this method, it was concluded that the proposed risk analysis procedure has the potential to increase the efficacy of preclinical validation protocols for new epiphyseal replacement devices.

Surgical navigation systems are currently used to guide the surgeon in the correct alignment of the implant. The aim of this study was to expand the use of navigation systems by proposing a surgical protocol for intraoperative kinematics evaluations during knee arthroplasty. The protocol was evaluated on 20 patients, half undergoing unicondylar knee arthroplasty (UKA) and half undergoing posterior-substituting, rotating-platform total knee arthroplasty (TKA). The protocol includes a simple acquisition procedure and an original elaboration methodology. Kinematic tests were performed before and after surgery and included varus/valgus stress at 0 and 30° and passive range of motion. Both UKA and TKA improved varus/valgus stability in extension and preserved the total magnitude of screw–home motion during flexion. Moreover, compared to preoperative conditions, values assumed by tibial axial rotation during flexion in TKA knees were more similar to the rotating patterns of UKA knees. The analysis of the anteroposterior displacement of the knee compartments confirmed that the two prostheses did not produce medial pivoting, but achieved a postoperative normal behavior. These results demonstrated that proposed intraoperative kinematics evaluations by a navigation system provided new information on the functional outcome of the reconstruction useful to restore knee kinematics during surgery. © 2008 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 27:202–207, 2009

Background This paper reports an in-vitro study for evaluating the influence of the femoral tunnel orientation in anterior cruciate ligament (ACL) double-bundle reconstructions. Methods This work describes the experimental protocol and results obtained for six cadaver knees using the FlashPoint optical system (Image Guided, Boulder, Colorado, USA) and a computer-assisted technique for the elaboration of anatomical and kinematic data. Each specimen was examined by the same surgeon in the following steps: (1) intact knee stability was evaluated by performing antero-posterior displacement and internal-external rotation test at 90°; (2) the ACL was resected and the knee evaluated again; (3) the ACL was reconstructed using the gracilis semi-tendinous tendon (through horizontal tunnels in femur), and the new kinematics recorded; (4) the ACL was reconstructed again with the same tendon, but with a more vertical orientation of the femoral tunnel (vertical tunnel) and kinematics was once more recorded; (5) finally the knee was dissected to digitise the anatomical structures. Results Off-line computer analysis of the acquired anatomical and kinematic data showed that there was a significant statistical difference (Wilcoxon test with the Montecarlo method for small samples – p = 0.035) between horizontal tunnel (HT) and vertical tunnel (VT) reconstruction both in the antero-posterior test (median antero-posterior displacement in horizontal tunnel was 0.8 mm less than in vertical tunnel reconstruction) and in the internal-external (IE) rotation test (median internal-external rotation in horizontal tunnel reconstruction was 5° less than in vertical tunnel reconstruction). Conclusion The analysis of graft behavior in reconstructed knees compared with normal and ACL-deficient knees suggests that the most horizontal tunnel performed better than the vertical tunnel, thus constraining optimally both antero-posterior and internal-external rotations. This finding suggests that femoral tunnel direction may be an important issue in ACL surgery.

Background In this paper we describe and assess the feasibility of a computer-assisted method which could be useful to investigate the mechanism of subacromial impingment of the shoulder. Methods The relationship between the infraspinatus and supraspinatus and the coracoacromial (CA) arch during passive elevation and abduction are described. The methodology is based on the use of a tracker for recording surfaces and passive movements and data elaboration using dedicated software. Results In four cadavers, we observed that the minimal distances between the rotator cuff insertions and CA arch were realized at 45° abduction between the acromion and infraspinatus, at 50–90° elevation between the acromion and supraspinatus and also at 45–70° abduction between the CA ligament and supraspinatus. This study showed that the proposed method is able to provide repeatable kinematic data (ICC ≥ 0.90), numerical anatomical data comparable with the literature and, moreover, individual measurements on the shoulder joint. Conclusions This preliminary results support the extension of the methodology to an in vivo protocol to be used during computer-assisted arthroscopic surgery. Copyright © 2008 John Wiley & Sons, Ltd.

Roentgen stereophotogrammetric analysis (RSA) is an important technique for in vivo evaluation of joint kinematics and surgical outcome. However, its accuracy is highly affected by the experimental set-up. In this paper we present a new software environment for assessing the impact of calibration cage design on the accuracy of the reconstruction of 3D points, which can be easily used for preliminary evaluations also by non-expert users. The paper presents methods of the simulator and preliminary results in a clinical standard and custom environment. The software was realized using MATLAB and developed for the PC/Windows operating system. It is freeware under request to authors.

A real improvement in anterior cruciate ligament (ACL) surgery would be achieved if a global kinematic evaluation of graft performance could be made during surgery. A quantitative evaluation of all residual instabilities would be helpful in the evaluation of graft performances. This paper describes a new protocol for an accurate and extensive computer-assisted in vivo evaluation of joint laxities during ACL reconstruction. Fifteen in vivo kinematic evaluations during ACL reconstruction were performed using an optical localizer and custom software. The capability of the protocol was studied by analyzing the accuracy and repeatability of the results, the ergonomics of the setup, time taken, interactions with the surgical steps, and efficacy of the acquisitions. Repeatability of the tests, at maximum force, remained under 1 mm/2 degrees . Repeatability in tibia position and orientation was lower than 1 mm/4 degrees . Secondary laxities during stress tests remained under 2 mm/3 degrees . Added time to surgery was about 11 min. ACL graft increased joint stability up to 52% with respect to the preoperative level. The simplicity and morbidity of the test procedure and system was minimally invasive and allowed a quantitative evaluation of knee laxities at time zero. The repeatability of the tests opens the way for future research on in vivo evaluation of different ACL reconstruction techniques, which may lead to a better understanding of associated lesions and their role to the global knee stability.

An understanding of the orientation of posterior cruciate ligament (PCL) fibres can contribute to current knowledge of PCL biomechanics and potentially improve the effectiveness of PCL surgical reconstruction. In this paper, the orientation of PCL fibres with respect to the tibia and femur was analysed by means of a new computer method. The antero-lateral (AL) and postero-medial (PM) bundles of the PCL showed an increasing slope with respect to the tibial plateau during flexion and a statistically significant difference between them (AL: 37-65 degrees, PM: 47-60 degrees). PCL bundles showed similar orientation with respect to the femur and varied 14 degrees average during flexion. The study also measured 84 degrees twisting of PCL bundles during passive range of motion.

No quantitative data are reported in the literature regarding the orientation of anterior cruciate ligament (ACL) fibers during passive range of motion. In this study we performed an original qualitative and quantitative analysis in eight cadaver knees, examining ACL elongation and 3D orientation. Computer elaboration of anatomical and kinematic data obtained by a six degrees-of-freedom electrogoniometer enabled a mathematical and statistical evaluation of the 3D behavior of the ACL. Our data confirmed the isometric behavior of ACL. The inclination of ACL with respect to the tibial plateau decreases with flexion from 56 degrees to 33 degrees. Orientation of ACL with respect to the femoral notch increases with flexion from 4 degrees to 58 degrees. The ACL orientation in a medio-lateral direction changes from 24 degrees to 52 degrees. The postero-lateral and the antero-medial bundle have different angular variations, mainly with respect to the tibial plateau and medio-lateral direction. This quantitative and qualitative information not only increases the anatomical knowledge of the ACL, but could also be important in developing or improving the surgical strategy for ACL reconstruction.