Search

Background/purpose: Studies have reported the advantages of digital imaging-assisted orthognathic surgery planning, but there is scarce information about a full digital planning modality. This study evaluated the 3D cephalometric-based and patient-reported outcomes of a full digital workflow for orthognathic surgery planning in the treatment of asymmetric maxillomandibular disharmony. Methods: A postoperative 3D image dataset of 30 Taiwanese Chinese patients with asymmetric skeletal Class III deformities who underwent full digital planning for two-jaw surgery were retrieved from the authors’ database. The 3D cephalometric data (dental, skeletal, and soft tissue evaluations) were compared to the ethnicity-matched 3D cephalometric normative values. Patient-reported outcome measure tools regarding postoperative overall appearance and satisfaction with facial areas (ranging from 0 to 100 and 0 to 10, respectively) were administered. The number of needed or requested revisionary surgery was collected. Results: No difference (all p > 0.05) was observed between the orthognathic-surgery-treated patients and the normative value for most of the tested 3D cephalometric parameters, with the exception (p

Patients with maxillomandibular disharmony may present with a flat to concave midface. The effects of orthognathic surgery concomitant with midface fat grafting on facial appearance and midface volumetric and positional change have not formally been assessed to date. The authors' approach for synchronous orthognathic surgery and fat grafting is described and evaluated. Adult female patients (n = 20) who underwent synchronous two-jaw orthognathic surgery and cheek-specific fat grafting (1.9 ± 0.6 cm3 per side) for correction of skeletal class III deformity and anteromedial cheek deficiency were prospectively included. Preoperative and postoperative photographs were appraised by 42 blinded raters using facial appearance scales for beauty, attractiveness, and pleasantness parameters. The three-dimensional midface soft-tissue volume change and postoperative cheek mass position were computed. Facial imaging data from gender-, ethnic-, and facial pattern-matched adult patients (n = 20) who underwent isolated two-jaw orthognathic surgery (n = 20) were included for comparison. The three-dimensional facial norms database-derived cheek mass position information (2.19 ± 1.31mm) was also adopted for analysis. Patients treated with the synchronous procedure had significantly (p0.001) increased facial appearance-related perception change for beauty (2.9 ± 1.6), attractiveness (2.8 ± 1.8), and pleasantness (3.0 ± 1.5) parameters, three-dimensional midface volume change (1.8 ± 0.5 cm3), and postoperative cheek mass position (2.16 ± 0.47 mm) in comparison with those treated with the isolated procedure (2.0 ± 1.5, 1.9 ± 1.6, 2.3 ± 1.6, 0.6 ± 0.2 cm3, and 1.84 ± 0.43 mm, respectively). Healthy female individuals had similar and larger cheek mass position than patients treated with synchronous (p0.05) and isolated (p0.001) procedures, respectively. Synchronous orthognathic surgery and check-specific fat grafting resulted in superior enhancement of facial appearance and midface volume and position compared with isolated orthognathic surgery.Therapeutic, III.

Background: Augmentation rhinoplasty with autologous fat grafting is a useful procedure to meet the demand for facial harmonization in the Asian population. We used this procedure during orthognathic surgery to address inadequate dorsum projection. This prospective study was conducted to determine the fat retention rate in patients undergoing simultaneous autologous fat injection augmentation rhinoplasty and orthognathic surgery. Methods: Nineteen patients were treated with simultaneous bimaxillary orthognathic surgery and autologous fat grafting of the nasal dorsum and tip. The paired t test was used to compare the nasal volumes before and at least 6 months after surgery measured by 3-dimensional computer tomography scans. All measurements were performed twice by the same evaluator at least 2 weeks apart for intrarater consistency. Results: Seventeen patients completed the study. The volume means before and after surgery were 22.3 ± 4.6 cm3 and 23.3 ± 4.7 cm3, respectively, with a mean difference of 1.0 ± 0.3 cm3 ( P < .001). The mean retention rate was calculated to be 50.5% ± 7.0% (range: 40.5%-64.7%). Intrarater consistency was high with a Cronbach α of .97 ( P < .001) and .98 ( P < .001), respectively. Conclusion: This prospective study provides objective graft retention measurements for fat injection augmentation rhinoplasty combined with orthognathic surgery. All patients were satisfied with the results and no complications or additional morbidity was noted in the postoperative course. We consider this procedure to be a safe, reliable, and powerful adjunct to improve the aesthetic results of orthognathic surgery.

Background: There is an increasing patient expectation for better esthetics, manifesting through anatomical harmony, projection, and volume of the upper lip relative to the lower lip, in patients with cleft deformity. The aim of this study is to investigate the outcome of vermilion augmentation using autologous dermofat graft (DFG) to enhance the lip using both quantitative and qualitative assessment. Methods: Patients with secondary cleft lip deformity who received the surgical treatment in our institution from 2015 to 2018 were recruited. Panel assessment was performed on standardized preoperative and postoperative digital photographs. A patient questionnaire was used for the reported outcome. Image processing and analyses were applied to measure the lip change. Statistical analyses were performed. Results: A total of 91 patients were included. The mean age at operation was 22.7 years, and postoperative follow-up was 3.6 years. There were no complications in the study group. The panel assessment showed significant improvement ( P < .00001) on upper lip vermilion in both frontal and lateral profile views. Ninety-five percent of patients reported improvement of the upper lip projection and volume. Quantitative image analysis showed an increase in the upper lip vermilion ratio in 97% of the cases in frontal views and improvement of the vermilion projection in 87% of the cases in the superimposed lateral views. Conclusions: The use of DFG is an effective and reproducible method for vermilion augmentation and aesthetic enhancement in patients presenting with upper lip insufficiency relative to the lower lip.

BACKGROUND Le Fort I maxillary repositioning influences nasal morphology. In Asian cultures, upward nasal tip rotation with increased nostril exposure is considered aesthetically unpleasant and can have psychosocial consequences. This three-dimensional imaging-based study evaluated the effect of different Le Fort I maxillary movements on nasal tip rotation. METHODS Consecutive patients who underwent two-jaw orthognathic surgery (n = 107) were enrolled. To achieve a standard head orientation, preoperative and 1-week and 12-month postoperative cone-beam computed tomography-derived three-dimensional craniofacial models were superimposed. Tip rotation angle was calculated according to the Frankfort horizontal plane for all three-dimensional digital models. The final tip rotation angle change was defined as 12-month postoperative value minus preoperative value. Translational maxillary movement types (advancement versus setback and intrusion versus extrusion), postoperative maxillary segment locations (anterosuperior, anteroinferior, posterosuperior, or posteroinferior), and actual linear maxillary changes were noted. RESULTS Advancement (1.79 ± 5.20 degrees) and intrusion (2.23 ± 4.96 degrees) movements demonstrated significantly larger final tip rotation angle changes than setback (-0.88 ± 5.15 degrees) and extrusion (0.09 ± 5.44 degrees) movements (all p < 0.05). Postoperative anterosuperior location (2.95 ± 4.52 degrees) of the maxillary segment demonstrated a significantly larger final tip rotation angle change than anteroinferior (0.48 ± 5.65 degrees), posterosuperior (-1.08 ± 4.77 degrees), and posteroinferior (-0.64 ± 5.80 degrees) locations (all p < 0.05). Translational maxillary movement and actual linear maxillary change were not correlated with final tip rotation angle change. CONCLUSION Effects of Le Fort I maxillary repositioning on nasal tip rotation depend on movement types and maxillary segment location. CLINICAL QUESTION/LEVEL OF EVIDENCE Therapeutic, III.

SUMMARY Millard's rotation-advancement principle, first-described 60 years ago, continues to guide surgeons in reconstruction of the unilateral cleft lip. Modifications of the rotation-advancement repair are commonly used; however, distinction between the complete and incomplete forms of cleft lip has received less emphasis in surgical procedure descriptions. As a unilateral incomplete cleft lip could present with more tissue overall and a larger lip on the cleft side than a complete form of cleft lip, the authors have adopted a deformity-specific technical approach to treat each particular cleft form. This article highlights the 10 key steps for execution of a modified unilateral incomplete cleft lip repair using the rotation-advancement principle plus the "skin-follows-muscle" model. The intraoperative design and the reconstruction of the skin, muscle, vermilion, intraoral mucosal, and nasal elements are fully detailed in the accompanying videos.

BACKGROUND The objective of this trial is to evaluate the flexibility of the cartilaginous component of the cleft nose after diced cartilage rhinoplasty by determining the degree of possible bending in relation to the vertical nasal dorsum axis and to compare with to a control group of the unaffected population. PATIENTS AND METHODS Fifteen cleft nose patients with diced cartilage rhinoplasty were included in this study, as well as a control group of 15 unaffected individuals. The angle of maximum nasal bending is measured between the basic and maximum bending axis and performed by the same rater twice at least 2 weeks apart to account for intrarater reliability. Study groups were compared with Fisher and independent t test. RESULTS The maximum bending to the left side was 16.10 ± 5.03 degrees for the study group and 23.95 ± 6.54 degrees for the control group (P = 0.001). The maximum bending to the right side were 16.54 ± 6.73 degrees for the study group and 23.00 ± 8.88 degrees for the control group (P = 0.034). CONCLUSION Diced cartilage graft injection for dorsal augmentation yields reproducible and esthetically pleasing outcomes with good flexibility and natural feel of the nasal tip. Although there is a significant difference compared with a nonaffected control group in maximum bending capacity, all patients in this study were satisfied with the results.

Purpose An objective and quantitative assessment of facial symmetry is essential for the surgical planning and evaluation of treatment outcomes in orthognathic surgery (OGS). This study applied the transfer learning model with a convolutional neural network based on 3-dimensional (3D) contour line features to evaluate the facial symmetry before and after OGS. Methods A total of 158 patients were recruited in a retrospective cohort study for the assessment and comparison of facial symmetry before and after OGS from January 2018 to March 2020. Three-dimensional facial photographs were captured by the 3dMD face system in a natural head position, with eyes looking forward, relaxed facial muscles, and habitual dental occlusion before and at least 6 months after surgery. Three-dimensional contour images were extracted from 3D facial images for the subsequent Web-based automatic assessment of facial symmetry by using the transfer learning with a convolutional neural network model. Results The mean score of postoperative facial symmetry showed significant improvements from 2.74 to 3.52, and the improvement degree of facial symmetry (in percentage) after surgery was 21% using the constructed machine learning model. A Web-based system provided a user-friendly interface and quick assessment results for clinicians and was an effective doctor-patient communication tool. Conclusions This work was the first attempt to automatically assess the facial symmetry before and after surgery in an objective and quantitative value by using a machine learning model based on the 3D contour feature map.

Secondary alveolar bone grafting is one of the key surgical procedures performed to restore dental arch continuity and facilitate tooth eruption in patients with cleft lip and palate. Harvest of cancellous bone graft from the iliac crest has become the gold standard; however. there is no consensus regarding the ideal technique. An optimal bone harvest technique must be aimed at producing minimal donor-site morbidity and patient discomfort. The success of the bone grafting procedure depends largely on the surgical technique. To restore cleft alveolar defects, one must be able to conceptualize the different underlying aspects of the problem to perform an effective surgical repair. It is important for surgeons-in-service to adopt newer techniques that significantly enhance the overall outcome. This article describes two techniques of iliac bone harvest and the principles involved in execution of the alveolar bone grafting procedure. The accompanying four-part video series depicts the bone harvest, flap design, dissection of the recipient cleft alveolus, and bone grafting in a step-by-step manner.

BACKGROUND The evolving 3-dimensional computer-based technology revolutionized the field of orthognathic surgery (OGS). Digital occlusion setup for OGS may provide advantages in the planning comparing with the conventional approach based on the manual setup using dental casts, but we are not aware of any study focusing on digital occlusion setup for cleft OGS. The purposes of this study were to compare the conventional and digital occlusion setup approaches and to propose a protocol for digital occlusion setup in unilateral cleft OGS. METHODS Thirty consecutive patients with unilateral cleft lip/palate who underwent orthodontic treatment by a single orthodontist and 2-jaw OGS by a single surgeon using 3-dimensional surgical simulation were adopted for analysis. Quantitative data were collected from the dental cast occlusion setup approach (conventional group). A multidisciplinary team combined this quantitative data and established a protocol for digital occlusion setup in cleft OGS. Digital occlusions were set according to this protocol using the images of the 30 patients, and quantitative data were collected accordingly (digital group). The results of 2 groups were compared. All information was reviewed to refine the protocol and define the final guidelines. RESULTS There were no significant differences (all P > 0.05) for all parameters, except midline discrepancy (conventional group > digital group, P < 0.001). The root-mean-square deviation (0.46 ± 0.26 mm) indicated acceptable relationship between the conventional and digital groups. A 6-step protocol for digital occlusion setup in cleft OGS was established: dental midline, overjet/overbite, yaw rotation, pitch rotation, roll rotation, and overall facial skeletal appearance. CONCLUSIONS This study shows that digital occlusion setup is quantitatively comparable with the conventional dental model approach and contributes for cleft OGS by establishing a protocol for surgical occlusion setup using digital approach.

Background: Primary reconstruction of complete bilateral cleft lip and palate (BCLP) with protruding premaxilla in one-stage surgery is challenging because of the tension on muscle repair. Such patients are also common in the developing countries. For this condition, we have applied intraoperative “rapid premaxillary molding (RPM)” technique and obtained satisfactory results. Methods: We reviewed the data of patients with complete BCLP with protruding premaxilla applying intraoperative RPM including both our institution and cleft missions to developing countries in the past 20 years. Selection criteria were patients receiving either no or insufficient preoperative molding presenting with significant protruding premaxilla, had consecutive follow-ups after surgery. To perform this technique, the surgeon holds the patient’s face with both hands and compresses the protruding premaxilla with both thumbs. An intermittent but stable backward pressure is applied to the premaxilla until the segment is gradually flexible. Repeated compression is performed prior to tying the muscle sutures, at which time the premaxilla is retro-positioned and aligned with the lateral maxillary segments. Pre- and postoperative data were evaluated. Results: We have treated a total of 60 patients with complete BCLP with protruding premaxilla applying intraoperative RPM. All patients tolerated the operations and there were no major intra- and postoperative complications including lip dehiscence and vomer fracture. All of them had satisfactory results such as adequate muscle repair and symmetry of the lip and nostrils. Conclusion: The RPM is a reliable and valuable intraoperative adjunct procedure for patients with complete BCLP presenting the protrusive premaxilla.

Purpose of review The purpose of this review is to provide an update on current practice and trends in fat graft surgery. The present review covers postoperative fat graft survival and phases, recipient bed and fat tissue enrichment issues, the spectrum of clinical applications in the cleft-craniofacial field, surgical techniques, and predictive factors for different outcomes. Recent findings Current investigations have led to a better understanding of fat graft survival and postoperative clinical progress. Fat grafting has been successfully adopted in a broad spectrum of cleft-related, craniofacial contour-related, burn-related, and radiation-related indications. Many variations on harvesting, processing, and delivery techniques and the use of recipient-site preconditioning and cell-enriched methods to increase the efficiency of fat grafting have been described, but little consensus exists about which technique is optimal. The development of predictors for fat grafting-related outcomes can aid multidisciplinary teams in providing better preoperative counseling, selecting the most suitable candidates for treatment, and establishing patient-specific postoperative care profiles. Summary The addition of modern fat graft surgery to the surgeon's toolbox revolutionized the delivery of surgical cleft and craniofacial care. Further investigation is necessary to assist surgeons in selecting the best candidates and optimal techniques.

No consensus exists on the selection of procedures for the treatment of submucous cleft palate, with scarce reports on long-term outcomes from single-surgeon experience. This study assessed the outcomes of using extended indication criteria of Furlow palatoplasty as the first-line procedure for the management of submucous cleft palate-associated velopharyngeal insufficiency.Consecutive nonsyndromic patients with submucous cleft palate (n = 216) treated by a single surgeon between 1998 and 2018 were reviewed. Furlow palatoplasty was performed in all patients diagnosed with submucous cleft palate-associated velopharyngeal insufficiency, regardless of the age cutoff, number of Calnan triad features, or velopharyngeal gap size and pattern. Postoperative velopharyngeal function outcome (adequate, marginal, or inadequate) and the need for secondary surgery were investigated. Age at surgery, sex, submucous cleft palate type (classic and occult), and presence of complication were evaluated for potential associations with this outcome.Forty-seven patients aged 8.3 ± 4.6 years with occult submucous cleft palate were significantly (p0.001) older than those with the classic type (n = 169; 5.6 ± 3.1 years). Most (p0.001) of the included patients [n = 181 (83.8 percent)] achieved adequate postoperative velopharyngeal function outcome. Three patients (1.4 percent) presented surgery-related complications, including bleeding and partial wound disruption. Secondary speech surgery was recommended in 24 patients (11.1 percent). In the bivariate and multivariate analyses, none of the tested variables was found to be associated (all p0.05) with the postoperative velopharyngeal function outcome.The extended indication criteria of Furlow palatoplasty provided adequate velopharyngeal insufficiency management with a low complication rate and satisfactory speech outcome.Risk, III.

Since the original description of Millard rotation advancement principle for cleft lip repair, many important contributions have subsequently been described by other surgeons worldwide. However, the reconstruction of the nasal floor and intraoral lining has received less attention over time. This article demonstrates a modified unilateral complete cleft lip repair using the rotation advancement principle plus multipurpose inferior turbinate mucosal flap. The accompanying videos display the 10 key steps for rationale, design, and proper execution of the inferior turbinate mucosal flap for the nasal floor and intraoral reconstruction.

Background: Orthognathic surgery is useful for correction of dental malocclusion and improvement of facial appearance. The FACE-Q is a patient-reported outcome instrument for evaluation of surgical and psychosocial effect. The purposes of this study were to conduct a linguistic validation of all FACE-Q scales to Mandarin Chinese, to test the orthognathic surgery-related scales for reliability and validity, and to evaluate the effect of orthognathic surgery. Methods: All FACE-Q scales and checklists were translated from English to Mandarin Chinese according to international recommendations: forward translations, backward translation, and cognitive interviews. Psychometric testing of orthognathic surgery-related scales of translated version was administered to patients with facial deformities and history of orthognathic surgery (n = 53; 17 scales) or no history of orthognathic surgery (n = 44; 11 scales), and control subjects (n = 57; 11 scales). Results: All FACE-Q scales and checklists were linguistically validated into Mandarin Chinese. The contents were confirmed valid among Mandarin Chinese-speaking population. The FACE-Q scales had excellent internal consistency (Cronbach's alpha >0.70) and discriminated (p

Objective: Nonsyndromic oral clefts are common birth defect with complex etiology. In the present study, we attempt to further validate the possible role for ABCA4 and ARHGAP29 in the susceptibility to nonsyndromic oral clefts. Design: We performed allelic transmission disequilibrium test analysis, on 10 eligible single nucleotide polymorphisms (SNPs) and SNP haplotypes using the Family-Based Association Test. Participants: The study sample consisted of 334 case–parent trios of nonsyndromic oral clefts from Taiwanese population, separated into nonsyndromic cleft lip with or without cleft palate (NSCL/P) and nonsyndromic cleft palate only (NSCPO) groups. Results: We found only the SNP rs560426 within the ABCA4 gene showed strong association with NSCPO ( P = .03498; Permuted P = .05382). No association between other 9 selected SNPs in ABCA4-ARHGAP29 region and the risk of nonsyndromic oral clefts was found. For the haplotype analyses, we found only haplotype T-C (rs570926 and rs3789431) in ABCA4 block 2 showed significant association with nonsyndromic NSCL/P in these Taiwanese trios. Conclusions: We used a family-based analysis in 334 Taiwanese case–parent trios to validate the possible role for ABCA4 and ARHGAP29 in the susceptibility to nonsyndromic oral clefts. This study provides a new evidence for an association between the intron variant rs560426 within ABCA4 and nonsyndromic cleft palate which may contribute their regulatory role in craniofacial development.

Skeletofacial reconstruction in skeletally mature patients with cleft lip/palate can be challenging because of multifaceted condition-specific anatomical features in addition to several repercussions from surgical intervention during the growing period. This surgical report presents the history and evolving philosophy of cleft-skeletofacial reconstruction at the Chang Gung Craniofacial Center, a referral center for cleft care in Taiwan. The maximization of satisfactory function and the appearance outcome-burden ratio have been the fundamental aims for this team to develop and upgrade cleft-skeletofacial reconstruction over the past 4 decades, with more than 10,000 mature patients treated. The study highlights key lessons learned in outcome-based and patient-oriented changes over time until the current approach, which focuses on patient-centered care with a comprehensive, multidisciplinary, and team-based model. Substantial advances in surgical, orthodontic, anesthetic, and computer imaging aspects have contributed to improving and optimizing the correction of a broad spectrum of facial and occlusal deformities while ensuring safety, predictability, efficiency, and stability in outcomes. Understanding the development and refinement of cleft-skeletofacial reconstruction over the time and transferring these time-tested and scientifically validated protocols and principles to clinical practice may serve as a reliable foundation to continue the advancement and enhancement of the delivery of surgical cleft care worldwide.

Summary Background The anterior oronasal fistulae neighboring the alveolar cleft could persist or reappear after the alveolar reconstruction with cancellous bone grafting. The persistent symptomatic anterior oronasal fistulae need to be repaired, but surgery remains a challenge in cleft care. Surprisingly, this issue has rarely been reported in the literature. The purpose of this long-term study was to report a single surgeon experience with a therapeutic protocol for persistent symptomatic anterior oronasal fistula repair. Methods This is a retrospective study of consecutive patients with Veau type III and IV clefts and persistent symptomatic anterior oronasal fistulae managed according to a therapeutic protocol from 1997 to 2018. Depending on fistula size, patients were treated with local flaps associated with an interpositional graft or two-stage tongue flaps (small/medium or large fistulae, respectively). The surgical outcomes were classified as “good” (complete fistula closure with no symptoms), “fair” (asymptomatic narrow fistula remained), or “poor” (failure with persistent symptoms). Results Forty-four patients with persistent symptomatic anterior oronasal fistulae were reconstructed with local flaps associated with interpositional fascia or dermal fat grafting (52.3%) or two-stage tongue flaps (47.7%). Most of patients (93.2%) presented “good” outcomes, ranging from 87% to 100% (local and tongue flaps, respectively). Three (6.8%) patients presented symptomatic residual fistula (“poor” outcomes). Conclusions For the repair of persistent symptomatic anterior oronasal fistulae, this therapeutic protocol provided satisfactory outcome with low fistula recurrence rate.

Summary Background Defining three-dimensional (3D) normal craniofacial morphology in healthy children could provide craniofacial surgeons a reference point to assess disease, plan surgical reconstruction, and evaluate treatment outcome. The purposes of this study were to report normal craniofacial form and quantify craniofacial asymmetry of healthy children in Taiwan by implementing the 3D stereophotogrammetry technique. Methods Healthy Taiwanese elementary school children (n = 652) aged 6–12 years with no known craniofacial anomaly were recruited. After the 3dMD scanning procedure, 32 landmarks were manually placed on the 3D cranial images. Thin plate spline algorithm based on landmarks and closest point matching was applied to deform a symmetric 3D template into the scale of each scanned images. Skull asymmetry and facial asymmetry were calculated using 3dMD vultus and MATLAB. Average head shape models were also presented. Results Overall, the mean head transverse width, height, anteroposterior length, and circumferences were 163.02, 220.79, 179.07, and 526.55 mm, respectively. On average, the skull asymmetry and facial asymmetry were 2.47 ± 1.26 mm and 0.96 ± 0.53 mm, respectively, with no significant (all p > 0.05) differences found when comparing males and females. In the average head shape model, certain craniofacial areas on the right side were found to be more protruded than those on the left side. Conclusions This study shows that the baseline craniofacial form of the Taiwanese elementary school children is asymmetric with a tendency of more protrusion of the head on the right side.

Encouraging results have been described for the use of pedicled buccal fat pad flap in primary cleft palate repair. This retrospective study describes the surgical technique and early results of a technical innovation utilizing the split buccal fat flaps in modified Furlow palatoplasty with small double-opposing Z-plasty. This technique introduces buccal fat tissue for coverage of lateral denuded palate surfaces to reduce the bone exposure and scar formation to potentially attenuate maxillary growth interference and for reinforcement of the palatal areas of high tension or with incomplete closure to decrease the risk of postoperative dehiscence and oronasal fistula formation. Consecutive nonsyndromic patients (n = 56) with cleft palate were treated with this method, all of whom demonstrated fast mucosalization of lateral palatal recipient regions within 3 weeks postoperatively and showed no fistula with 12 months' follow-up. Of 19 patients (33.9 percent) who underwent auditory-perceptual assessment, 15 (78.9 percent) had normal resonance. Surgeons could add this alternative surgical maneuver to their armamentarium during the primary palatoplasty, in which coverage of lateral surfaces and reinforcement with fat tissue in the anterior soft palate space are of paramount relevance.Therapeutic, IV.

Secondary cleft lip nasal deformity is complicated with wide spectrum of defect and varied reconstructive procedures. There has been no unanimous solution for a given problem. In case of a localized alar depression in unilateral cleft lip nasal deformity, the conchal cartilage applied as arch graft was proposed. Patients were recruited from database of craniofacial center who received Tajima method and arch cartilage graft. Inclusion criteria were patients with unilateral cleft lip nasal deformity after skeletal maturity. Through a reverse U incision, the lower lateral cartilage was dissected and released from the skin and the contralateral cartilage. The harvested conchal cartilage graft was trimmed to 25 to 30 by 8mm in size, and inserted as arch shape overlying the cleft side lower lateral cartilage. Transdomal fixation sutures were made. Outcome assessment was performed, and the nostril and alar dimensions were measured. Thirty-nine patients were eligible for evaluation of the surgical outcome. Majority of patients underwent simultaneous lip revision (97%). No surgery-related complications were noted in this series. Satisfaction to the nasal reconstruction was reported in 85% of patients. Further minor nasal revisions were performed in 6 patients (15%). Quantitative measurement showed statistically significant improvement in nostril height, alar height and alar width after the surgery. It is concluded that the Tajima reverse U approach plus arch cartilage graft is an effective method for secondary reconstruction of the unilateral cleft lip nasal deformity in selected patients presenting with cleft side alar depression.5.

Objective: To evaluate the development of the craniofacial region in healthy infants and analyze the asymmetry pattern in the first year of life. Methods: The participants were grouped by sex and age (1, 2, 4, 6, 9, and 12 months) to receive three-dimensional (3D) photographs. Stereoscopic craniofacial photos were captured and transformed into a series of craniofacial meshes in each group. The growth patterns of the anthropometric indices and the degree of craniofacial asymmetry were measured, and average craniofacial meshes and color-asymmetry maps with craniofacial asymmetry scores were calculated. Results: A total of 373 photographs from 66 infants were obtained. In both genders, the highest and lowest growth rates for all anthropometric indices were noted between 1 and 2 months and between 9 and 12 months, respectively. Overall, male infants had higher anthropometric indices, head volume, and head circumference than female infants. The craniofacial asymmetry score was presented with a descending pattern from 1 to 12 months of age in both sex groups. Both sex groups showed decreased left-sided laterality in the temporal-parietal-occipital region between 1 and 4 months of age and increased right frontal-temporal prominence between 6 and 12 months of age. Conclusions: A longitudinal evaluation of the craniofacial growth of healthy infants during their first year of life was presented.

The mandibular proximal ramus segments should be moved and rotated during orthognathic surgery-based skeletofacial reconstruction for the correction of challenging patients with facial asymmetry and malocclusion, but quantitative data regarding this rotation were not sufficient to date. This 3D computer-assisted study measured the proximal ramus segment rotation after 3D simulation-guided two-jaw surgery in patients with facial asymmetric deformity and class III malocclusion (n = 31). Using 3D mandible models and a reliable proximal ramus segment-related plane, angular changes in pitch, roll and yaw directions were measured before and one month after surgery. Significant rotational changes (p

In rare instances, cleft lip and palate occur in association with synechia, intraoral fibrous bands connecting the maxilla and mandible. The main concern in synechia is a restricted mouth opening that leads to airway and feeding problems. This study reports our experience in the treatment of 3 cases and includes a review of the literature. Three patients with intraoral fibrous bands received treatment and follow-ups in our center. Division of the bands and reconstruction of the lip and palate were successfully performed. All reported cases in the literature were collected for a summary of clinical presentations and as references for management. Early management of the synechia improves the mouth opening and facilitates the treatment of associated anomalies.

Symmetry and balance in nasal reconstruction can be hard to achieve. Traditionally, a foil template modeled after the unaffected contralateral side is used in the design of a forehead flap. Crude two-dimensional models often generate underwhelming results. To better simulate complex nasal topography, three-dimensional printing technology was applied to nasal reconstruction.Between May 2012 and October 2016, twenty patients underwent forehead flap nasal reconstruction for heminasal deformities. Ten reconstructions were guided with prefabricated three-dimensional templates (CAD/CAM), and ten patients underwent traditional nasal reconstruction without CAD/CAM. In the CAD/CAM group, two templates were printed: contour guide and framework guide. These were a reference for skin flap design and cartilage framework design, respectively. Photographic records and photogrammetry was used to evaluate results.The mean follow-up time was 19.3 months (range, 6 months to 38 months) in the control group and 17.4 months (range, 7 months to 35 months) in the CAD/CAM group. Without CAD/CAM, there was asymmetry in alar width, alar area, nostril height, width and area (p0.05) between reconstructed and native structures. In the CAD/CAM group, there were asymmetries of nostril-related parameters only. After quantifying asymmetries as a percentage, the CAD/CAM group demonstrated more symmetric reconstructions, particularly in alar width (p = 0.043) and alar area (p = 0.003).When CAD/CAM guidance and three-dimensional printing was used, there was greater symmetry between reconstructed and native structures of the nose.

Background The treatment plan for cleft lip and palate varies among centers and requires long-term evaluation of its final outcome. Methods A consecutive series of patients born from 1994 to 1996 were reviewed. Inclusion criteria were complete unilateral cleft lip and palate, undergoing all treatment procedures performed by the team, and continuous follow-ups until 20 years of age. Exclusion criteria were incomplete data, having microform cleft lip on the contralateral side, presence of the Simonart band, and other abnormalities. Results A total of 72 patients were included. Average age at final evaluation was 21.3 years; 83.3 percent of patients underwent one-stage rotation-advancement lip repair and 16.7 percent underwent two-stage repair with an initial adhesion cheiloplasty. All patients underwent palate repair using the two-flap method at an average age of 12.3 months. Velopharyngeal insufficiency occurred and required surgical interventions in 19.4 percent during the preschool age and in 16.7 percent at the time of alveolar bone grafting; 56.9 percent of patients underwent secondary lip/nose revision during the growing age. Regular orthodontic treatment was administered to 34.7 percent of patients between 12 and 16 years of age. Orthodontic treatment and orthognathic surgery were applied in 37.5 percent of the patients after maturity. The average number of surgical procedures to complete the treatment was 4.8 per patient. Conclusions This treatment protocol provided generally acceptable final outcome after the 20-year follow-up. Some results were less ideal and have resulted in modifications of the planning and methods in the protocol. Clinical question/level of evidence Therapeutic, IV.

Background Cleft lip/palate is a congenital craniofacial anomaly affecting patients physically and psychosocially and has contributed to the global burden of surgical disease, especially in underprivileged areas. For 20 years, Noordhoff Craniofacial Foundation (NCF) and the Chang Gung Craniofacial Center (CGCFC) have carried out missions to these areas. Rather than implementing short-term missions that lack proper follow-up care, the team has provided an effective, long-term, and multidisciplinary approach for the treatment of patients with cleft lip/palate. In this study, we evaluate the sustainability and effectiveness of the cleft mission model implemented by NCF and CGCFC. Methods Data from the years 1998-2017 were retrieved from the NCF database. All local centers were evaluated by a 3-stage categorization, levels 1 to 3, based on 4 criteria: (1) capacity to carry out independent missions, (2) diversity of cleft-care professionals, (3) diversity of surgical service offered, and (4) collaboration with local hospitals. Support and training of personnel were provided based on deficiency in these criteria. Noordhoff Craniofacial Foundation made close collaborations and partnerships with several organizations that shared its mission for comprehensive cleft care in developing countries. Results In all, 19 partner cleft teams in 9 different countries were established. In coordination with these teams, NCF and CGCFC have treated 1846 patients across 78 mission trips. To date, 158 personnel from 19 different countries have been successfully trained to provide cleft care in local centers. Most partner cleft teams centers have progressively reached category level 3, including those in the Philippines, Cambodia, and Mongolia. Conclusions In order to establish and maintain sustainable cleft care in developing regions, commitment and compassion toward those who lack essential resources are necessary. Noordhoff Craniofacial Foundation and CGCFC have achieved a successful and practicable model through seeding medical personnel in order to provide effective and sustainable cleft care to the regions in need.

The osteotomy in a bilateral sagittal split ramus osteotomy (BSSRO) is made in close proximity to the inferior alveolar nerve (IAN), so direct damage to the nerve and irreversible neurosensory deficit may result. The aim of this study was to compare the incidence of injury to the nerve when a conventional osteotomy using an osteotome was made, with that after manual twist splitting. We retrospectively reviewed the casenotes of 769 consecutive patients who had bilateral SSRO either alone or with a simultaneous maxillary procedure by a single surgeon from May 2009 - October 2016. Patients were divided into two groups based on the technique used. Those in the first group had conventional split osteotomy using an osteotome and hammer for splitting (conventional group, 736 sides), and in those in the second group the manual twist technique was used (manual group, 802 sides). Patients who sustained Sunderland fifth degree injuries were identified from an existing record of nerve repairs. Fisher's exact test was used to evaluate the significance of the number of injuries to the nerve in each group. Conventional osteotomy and hammer-assisted SSRO resulted in 8/736 (1.1%) injuries to the IAN, whereas the manual twist splitting technique resulted in 1/802 injuries (0.1%). Our results confirm that the manual twist splitting technique significantly reduces the incidence of injury to the IAN, though the overall incidence was low.

BACKGROUND The main objective of contemporary orthognathic surgery is to correct dentofacial deformities. Nonetheless, many adjunct procedures to enhance the esthetic outcome in orthognathic surgical cases have been successfully incorporated to improve patient satisfaction. The authors report our preliminary experience of performing simultaneous orthognathic surgery with Asian double eyelid suture method blepharoplasty in the same surgical setting. METHOD This case series report includes all 19 consecutive cases presenting to the Chang Gung Craniofacial Center for combined orthognathic surgery with Asian double eyelid suture method blepharoplasty. The double eyelid crease height was measured as the vertical line between the upper eyelid margin (eyelid lash) and the upper eyelid crease, observed at the mid-pupillary line with the eyes in primary gaze. RESULTS There were no complications or relapse reported within this time period. There was significant improvement in the left and right mid-pupillary double eyelid crease height postsurgery. There were no statistically significant differences between the left and right mid-pupillary double eyelid crease heights after surgery indicating good eyelid crease height symmetry bilaterally was obtained. CONCLUSIONS Orthognathic surgery combined with suture method blepharoplasty can be safely performed in the same surgical setting without inappropriate rise in costs or operating room time. This case series demonstrates that excellent esthetic results can be obtained in simultaneous bimaxillary orthognathic surgery with suture method Asian blepharoplasty.

Objectives Nasoalveolar molding (NAM) was developed to facilitate easier treatment and better outcomes for cleft lip and palate (CLP) patients. The aim of this study was to investigate the parental burden and possible intercultural differences of this treatment modality, which is often argued to burden parents to an extraordinary amount. Materials and methods Standardized questionnaires (available in English, Mandarin, and German) with 15 non-specific and 14 NAM-specific items to be retrospectively answered by Likert scales by parents of unilateral CLP patients with completed NAM treatment. Results The parents of 117 patients from two treatment centers in Taiwan and Germany were included. A very high level of overall satisfaction was found in both countries with significant intercultural differences in prenatal parent information, feeding problems, dealing with 3rd party’s perception, and experienced personal effort. Conclusion NAM is an effective treatment tool for children’s CLP deformities and their caregivers in overcoming the feeling of helplessness. Intercultural differences may be due to infrastructural reasons, cultural attitudes and habits, or different public medical education. Clinical relevance In addition to facilitating easier surgical treatment, NAM can be seen as a powerful coping strategy for parents dealing with a CLP deformity of their child and does not seem to burden them extraordinarily.

Three-dimensional (3D) computer-aided planning has truly revolutionized orthognathic surgery (OGS) treatment, but no study has compared the traditional hybrid and full 3D digital planning models. This study compared these virtual planning models in the treatment of asymmetric maxillomandibular disharmony.Young adult patients with an asymmetric skeletal class III deformity who underwent 3D computer-aided 2-jaw OGS using hybrid (alginate dental impression, 2D cephalometric tracings, manual-guided stone model surgery, occlusion setup, and splint fabrication; n = 30) or full digital (laser-scanned dentition, 3D cephalometric tracings, virtual-based occlusion setup and surgery, and computer-generated surgical splint; n = 30) planning models were consecutively recruited. Preoperative and postoperative 3D cephalometric analyses (dental relation, skeletal assessments based on sagittal and frontal views, and soft tissue evaluations) were adopted for intragroup and intergroup comparisons. Postoperative patient-perceived satisfaction with facial appearance was also recorded.Both hybrid and full digital planning groups had significant (all P0.05) improvements after surgery with respect to facial convexity, incisor overjet, and frontal symmetry parameters. The full 3D digital planning-based OGS treatment had similar (all P0.05) 3D cephalometric-derived outcomes (preoperative, postoperative, and treatment-induced change data) and patient-perceived outcomes compared with the traditional hybrid 3D planning method.For the decision-making process in selecting the planning model, multidisciplinary teams could consider additional parameters such as patient comfort, storage needs, convenience for data reuse, overall planning time, availability, and costs.

Surgeons-in-training learning how to perform cleft surgery should not only acquire a broad repertoire of technical details but also master the proper execution of techniques based on the modern principles of bilateral cleft lip repair with synchronous reconstruction of cleft nose deformity. This article describes a bilateral complete cleft lip repair by adopting these principles, plus a modified composition of mucosal flaps for the nasal floor and intraoral linings, including the prolabial mucosal flap, C-flap mucosal flap, inferior turbinate mucosal flap, and lateral nasal mucosal flap. The accompanying four-part video series presents the step-by-step approach for design and execution of this alternative technique.

BACKGROUND No consensus exists about the safest position for performing the osseous genioplasty, with 5 to 6 mm below the mental foramen being the most frequently recommended position. This study intends to generate a safe distance guide to minimize the risk of inferior alveolar nerve injury during osteotomy. METHODS Pretreatment cone-beam computed tomography-derived three-dimensional models from adult patients with skeletal class I to III patterns and cleft lip/palate deformity who underwent orthodontic-surgical interventions (n = 317) were analyzed. A three-dimensional vertical distance between the inferior margin of the mental foramen and the lowest point of the inferior alveolar nerve canal was measured in each three-dimensional hemimandible (n = 634). Statistical analysis was performed to generate the safe distance guide in a stepwise fashion at 95, 99, and 99.99 percent confidence levels. RESULTS Class III (4.35 ± 1.42 mm) and cleft lip/palate (4.42 ± 1.53 mm) groups presented significantly (p < 0.001) larger three-dimensional distances than class I (3.44 ± 1.54 mm) and class II (3.66 ± 1.51 mm) groups. By considering the 5- to 6-mm safe distance parameter, 6.4, 5.0, 10.6, 16, and 9.9 percent of hemimandibles were at risk of osteotomy-induced nerve injury in the class I, class II, class III, cleft lip/palate, and overall cohorts, respectively. Overall, the safe distance zone to perform the osteotomy was set at 7.06, 8.01, and 9.12 mm below the mental foramen, with risk probabilities of 2.5, 0.5, and 0.0005 percent, respectively. CONCLUSION This study contributes to patient safety and surgeon practice by proving a safe distance guide for genioplasty.

Skeletally mature patients with cleft lip and palate commonly present with skeletofacial deformities characterized by varying degrees of intrinsic and acquired dentoskeletal and soft tissue abnormalities. These abnormalities are associated with scarring from previous surgeries and the asymmetric midline and facial contour that impose challenges for adequate reconstruction. These patients frequently require 2-jaw orthognathic surgery to improve occlusal function and for correction of facial deformities. In this article, we have detailed a 3-dimensional computer-assisted single-splint 2-jaw orthognathic surgery technique as a surgical approach for cleft skeletofacial reconstruction, allowing for the surgery to be tailored according to the specific needs and requests of the patients. Further, we have addressed the multidimensionality and specificities of cleft treatment, the wide versatility, adaptability, and applicability of this technique, and the patient-centered rationale for the adoption of this method.

The Le Fort I maxillary advancement and rotational movement have been adopted to treat patients with cleft-related skeletal Class III pattern and anteromedial cheek soft tissue deficiency, but cleft-specific cheek soft tissue prediction data are insufficient. This 3D imaging-based study addressed the issue.3D craniofacial soft tissue and bone models were created from 32 consecutive patients who received computer-aided two-jaw orthognathic surgery for the correction of cleft-related Class III deformity and cheek soft tissue deficiency. Using superimposed 3D models, the cheek volumetric change, the cheek sagittal movement, and the 3D cheek mass position were calculated. 3D data from orthognathic surgery-treated patients with no cleft (noncleft cohort) and individuals with no facial deformity (3D norm value) were retrieved for comparative analysis.Surgical maxillary advancement (p 0.001) but not maxillary clockwise rotation (p 0.05) had a significant impact on the cheek soft tissue change, with prediction models showing that maxillary advancement elucidated 77 and 79% of this change on the cleft and noncleft sides, respectively. Cleft cohort (0.46±0.12) had a significantly (p 0.001) smaller cheek soft-to-hard tissue ratio than that of the noncleft cohort (0.73±0.13). Cleft maxillary advancements4 mm resulted in a 3D cheek mass position (2.1±1.1 mm) similar (p 0.05) to the 3D norm value (2.2±1.2 mm), but different (p = 0.037) from the noncleft cohort (2.38±0.7 mm).This study showed that maxillary advancement but not the maxillary rotation affects the cheek soft tissue change, and the predictive values and comparative data could assist the orthodontist-surgeon interaction during preoperative planning and patient counseling.

Orthognathic surgery (OGS) is frequently used to correct facial deformities associated with skeletal malocclusion and facial asymmetry. An accurate evaluation of facial symmetry is a critical for precise surgical planning and the execution of OGS. However, no facial symmetry scoring standard is available. Typically, orthodontists or physicians simply judge facial symmetry. Therefore, maintaining accuracy is difficult. We propose a convolutional neural network with a transfer learning approach for facial symmetry assessment based on 3-dimensional (3D) features to assist physicians in enhancing medical treatments. We trained a new model to score facial symmetry using transfer learning. Cone-beam computed tomography scans in 3D were transformed into contour maps that preserved 3D characteristics. We used various data preprocessing and amplification methods to determine the optimal results. The original data were enlarged by 100 times. We compared the quality of the four models in our experiment, and the neural network architecture was used in the analysis to import the pretraining model. We also increased the number of layers, and the classification layer was fully connected. We input random deformation data during training and dropout to prevent the model from overfitting. In our experimental results, the Xception model and the constant data amplification approach achieved an accuracy rate of 90%.

Surgical mobilization of the maxillary segment affects nasal morphology. This study assessed the impact of the type of maxillary mobilization on the three-dimensional (3D) nasal morphometry.Pre- and postsurgery cone beam computed tomography-derived facial image datasets of consecutive patients who underwent two-jaw orthognathic surgery were reviewed. Using preoperative 3D facial models as the positional reference of the skeletal framework, 12-month postoperative 3D facial models were classified into four types of maxillary mobilizations (advancement [n = 83], setback [n = 24], intrusion [n = 55], and extrusion [n = 52]) and four types of final maxillary positions (anterosuperior [n = 44], anteroinferior [n = 39], posterosuperior [n = 11], and posteroinferior [n = 13]). Six 3D soft tissue nasal morphometric parameters were measured, with excellent intra- and interexaminer reliability scores (ICC0.897) for all the measurements. The 3D nasal change for each nasal parameter was computed as the difference between postoperative and preoperative measurement values.The intrusion maxillary mobilization resulted in a significantly (all p0.05) larger 3D nasal change in terms of alar width, alar base width, and nostril angle parameters, and a smaller change in terms of the nasal tip height parameter than the extrusion maxillary mobilization; however, no significant (all p0.05) difference was observed between advancement and setback maxillary mobilizations. The anterosuperior and posterosuperior maxillary positions had a significantly (all p0.05) larger 3D nasal change in terms of the alar base width and nostril angle than the anteroinferior and posteroinferior maxillary positions.The type of maxillary mobilization affects the 3D nasal morphometry.

Background: The purpose of this study was to evaluate the stability on dental and skeletal aspect after surgical advancement and counterclockwise rotation for the correction of the mandibular deficiency in patients with high mandibular plane angle (MPA). Methods: We analyzed the records of patients who had undergone surgical treatment for dentofacial deformities with mandibular deficiency and high MPA. Clinical and radiological data were taken 1 month before surgery (T0), 6 weeks after surgery (T1) and 1 year after surgery (T2). Cephalometric values of the MPA were recorded and compared. The cephalometric changes in the different time periods were defined as follows: A: postsurgical changes (T0–T1), B: one-year changes (T1–T2), and C: short term changes (T0–T2). Results: Twenty-seven patients had prominent mandibular deficiency with an MPA of over 35° (high angle). The mean age of patients at surgery was 29.7 years. Seven patients had a single jaw procedure, 20 patients had bilateral sagittal split osteotomy (BSSO) combined with a Le Fort I osteotomy, and 14 patients had additional genioplasty. MPA values differed significantly between the time periods (p < 0.05) with an observed relapse of the angle. However, satisfactory clinical improvement was achieved in the dental and skeletal presentation. The overjet improvement was evident from 8.815 ± 2.085 mm (T0) to 3.426 ± 1.253 mm (T2). Conclusion: Counterclockwise surgical advancement of the mandible to correct mandibular deficiency in patients with a high mandibular plane angle showed an overall acceptable stability during one-year follow-up.

BACKGROUND A recent artificial intelligence-based investigation has shown the impacts of orthognathic surgery on the patient's facial appearance and apparent age. However, appearance and age perception as reported by patients and surgical professionals have not been addressed in the same cohort to date. METHODS FACE-Q facial appraisal (appearance and age) and quality-of-life scale scores obtained before and after orthognathic surgery, in addition to three-dimensional photographs of 70 patients with skeletal class III deformity, were collected for a comparative cross-sectional study. Seven blinded plastic surgeons rated all photographs for apparent facial aesthetic and age scales. The FACE-Q data from 57 matched normal individuals were adopted for the comparative analyses. The correlation between the FACE-Q and the professional-based scales was tested. RESULTS Pre-orthognathic surgery versus post-orthognathic surgery comparisons showed significant differences (p < 0.001) for all FACE-Q scales and panel assessments, with higher (FACE-Q scales and professional-based aesthetic parameters) and lower (FACE-Q patient-perceived age scale and professional-based age parameter) values for post-orthognathic surgery measurements. Patients had significantly (p < 0.001) higher (patient-perceived age scale) and lower (facial appraisal and quality-of-life scales) FACE-Q values than normal individuals for pre-orthognathic surgery but not for post-orthognathic surgery measurements. The FACE-Q facial appearance overall scale had significant correlations (p < 0.001) with the panel assessment for the parameters "beautiful" and "attractive" but not for the "pleasant" parameter. No significant correlations were observed for facial age scales. CONCLUSION This study contributes to the orthognathic surgery literature by revealing that orthognathic surgery positively impacts the perception of apparent facial age and improves facial appearance and quality of life. CLINICAL QUESTION/LEVEL OF EVIDENCE Therapeutic, IV.

Patient satisfaction with the shape and appearance of their nose after orthognathic surgery-based skeletofacial reconstruction is an important, but often overlooked, outcome. We assessed the nose-related outcomes through a recently developed patient-reported outcome instrument and a widely adopted 3D computer-based objective outcome instrument, to verify any correlation in the results produced by these tools. We collected FACE-Q nose appearance reports (2 scales) and 3D nasal morphometry (10 parameters) from patients with class III skeletal pattern and congenital cleft lip palate deformity (n = 23) or developmental dentofacial deformity (n = 23) after (>12 months) skeletofacial reconstruction. The cleft and dentofacial cohorts demonstrated significantly (p

Computer-assisted 3D planning has overcome the limitations of conventional 2D planning-guided orthognathic surgery (OGS), but difference for facial contour asymmetry outcome has not been verified to date. This comparative study assessed the facial contour asymmetry outcome of consecutive patients with unilateral cleft lip and palate who underwent 2D planning (n = 37)- or 3D simulation (n = 38)-guided OGS treatment for correction of maxillary hypoplasia and skeletal Class III malocclusion between 2010 and 2018. Normal age-, gender-, and ethnicity-matched individuals (n = 60) were enrolled for comparative analyses. 2D (n = 60, with 30 images for each group) and 3D (n = 43, with 18 and 25 images for 2D planning and 3D simulation groups, respectively) photogrammetric-based facial contour asymmetry-related measurements were collected from patients and normal individuals. The facial asymmetry was further verified by using subjective perception of a panel composed of 6 blinded raters. On average, the facial contour asymmetry was significantly (all p

PURPOSE Autologous fat injection is a widely used, simple, and less invasive technique to correct volume deficiency. This study developed a treatment method by using a 3-dimensional (3D) simulation to plan and implement fat injection in patients with an extensive facial deficiency and then validated the accuracy of the method and treatment outcomes. METHODS Seven patients with a large unilateral facial deficiency receiving autologous fat grafts between 2015 and 2017 were recruited. One patient received repeated treatment. Furthermore, 3D surgical simulation was used to measure the difference between the mirrored image and lesion side. An extra 20% to 30% of fat graft was added. A color map was provided, and contour lines 2 mm deep marked the location of the fat injection. Outcome assessments were then performed, and a 3D symmetry index was defined using the contour lines on the facial surface. RESULTS No significant difference was noted between the predicted volume and postoperative fat graft retention (35.7 ± 7.4 and 31.6 ± 9.7 mL, respectively; P = 0.176). A comparison of preoperative (79.5% ± 4.3%) and postoperative (89.0% ± 3.3%) 3D symmetry indexes indicated significantly improved facial symmetry (P = 0.018). Patient-reported outcomes of satisfaction on FACE-Q questionnaires yielded an average score of 62.73, higher than the control score (59.83). CONCLUSIONS By using the proposed method, we could predict the required fat graft volume; moreover, the contoured map aided accurate surgical implementation. Thus, this method is useful for planning and guiding fat grafting treatment in patients with major unilateral facial deficiency.