Search

Bicalutamide (BCL) is a nonsteroidal antiandrogen drug that represents an alternative to castration in the treatment of prostate cancer, due to its relatively long half-life and tolerable side effects. However, it possesses a very low water solubility that can affect its oral bioavailability. In this work, we developed inclusion complexes of BCL with the highly soluble hydroxypropyl-β-cyclodextrin (HP-β-CyD) and sulfobutylether-β-cyclodextrin (SBE-β-CyD) to increase the water solubility and anticancer activity of BCL. The inclusion complexes were prepared using the freeze-drying method and were then characterized in a solid state via differential scanning calorimetry and X-ray analysis and in solution via phase-solubility studies and UV-vis and NMR spectroscopy. The BCL/HP-β-CyD and BCL/SBE-β-CyD inclusion complexes were amorphous and rapidly dissolved in water. Both the 1H-NMR spectra and molecular modeling studies confirmed the penetration of the 2-(trifluoromethyl)benzonitrile ring of BCL within the cavity of both cyclodextrins (CyDs). Due to the consistent improvement of the water solubility of BCL, the inclusion complexes showed higher antiproliferative activity toward the human prostate androgen-independent cell lines, DU-145 and PC-3, with respect to free BCL. These results demonstrate the ability of HP-β-CyD and SBE-β-CyD to complex BCL, permitting the realization of liquid formulations with potentially high oral bioavailability and/or possible parenteral administration.

This study was aimed at preparing and characterizing solid lipid nanoparticles loading rutin (RT-SLNs) for the treatment of oxidative stress-induced diseases. Phospholipon 80H® as a solid lipid and Polysorbate 80 as surfactant were used for the SLNs preparation, using the solvent emulsification/diffusion method. We obtained spherical RT-SLNs with low sizes, ranging from 40 to 60 nm (hydrodynamic radius) for the SLNs prepared starting from 2% and 5% (w/w) theoretical amount. All prepared formulations showed negative zeta-potential values. RT was efficiently encapsulated within SLNs, obtaining high encapsulation efficiency and drug content percentages, particularly for SLNs prepared with a 5% theoretical amount of RT. In vitro release profiles and analysis of the obtained data applying different kinetic models revealed Fickian diffusion as the main mechanism of RT release from the SLNs. The morphology of RT-SLNs was characterized by scanning electron microscopy (SEM), whereas the interactions between RT and the lipid matrix were investigated by Raman spectroscopy, evidencing spectral modifications of characteristic bands of RT due to the establishment of new interactions. Finally, antioxidant activity assay on human glioblastoma astrocytoma (U373) culture cells showed a dose-dependent activity for RT-SLNs, particularly at the highest assayed dose (50 μM), whereas the free drug showed the lesser activity.

We investigated the complexation of celecoxib (CCB) into sulfobuthyl-ether-β-cyclodextrin (SBE-β-CD) for the realization of an inhalable dry-powder formulation containing gemcitabine (GEM) for lung anticancer therapy. Complexation increased the water solubility of CCB (0.003 mg/mL and 0.834 mg/mL for CCB free and complexed, respectively) and produced a quantitative dissolution of the drug within 15 min. The CCB/SBE-β-CD inclusion complex showed a high stability constant (8131 M–1) not influenced by the presence of GEM in solution. Two-dimensional NMR experiments and computational studies demonstrated that the pyrazole ring of CCB penetrates deeper into SBE-β-CD from the secondary rim. The aromatic rings are positioned at the edge of the cavity, establishing hydrogen bonds with the SBE-β-CD that stabilized the complex. CCB showed limited cytotoxic activity on A549 cell lines. Complexation significantly increased activity passing from 30% to 45% cell mortality. Moreover, CCB/SBE-β-CD strongly improved the cytotoxicity of GEM, observing about 60% of cell mortality for the combined formulation.

Ultradeformable liposomes represent useful formulations able to increase the skin permeation of drug compounds. In this study, resveratrol- and 5-fluorouracil-loaded ultradeformable liposomes were investigated for the potential treatment of non-melanoma skin cancer. The in vitro anticancer activity of ultradeformable liposomes was tested on human skin cancer cells through viability-, cell cycle- and apoptosis-analysis. Furthermore, we tested the percutaneous permeation of ultradeformable liposomes using human stratum corneum and viable epidermis. The co-encapsulation of resveratrol and 5-fluorouracil (multi-drug carrier) in ultradeformable liposomes improved their anticancer activity on skin cancer cells as compared to both the free drug form and the single entrapped agents. These multi-drug ultradeformable liposomes arrest cell proliferation in G1/S, thus modifying the action of 5-fluorouracil and increasing the activity of resveratrol. This effect might depend on the ultradeformable liposomes, which may accumulate in deeper skin layers, thus generating a cutaneous depot from which resveratrol and 5-fluorouracil are gradually released. Resveratrol and 5-fluorouracil co-loaded ultradeformable liposomes could be a new nanomedicine for the treatment of squamous cell carcinoma, i.e., actinic keratosis, Bowen's disease, and keratoacanthoma.

In order to obtain nanocarriers suitable for the delivery of drugs in the treatment of cancer, pH-responsive nanovesicles capable of facilitating fusion (fusogenic nanovesicles) were synthesized and then their physicochemical characteristics were modified. These nanovesicles were made by combining polysorbates having different physicochemical features with the aim of realizing multiple-targeting nanoformulations suitable for in vitro treatment of cancer cells. Tween21 and Tween80 were self-assembled at different molar concentrations resulting in pH-responsive fusogenic nanovesicles with an average size of less than 150 nm, and a narrow size distribution (polydispersity index) value of less than 0.2. Hydrophobic and hydrophilic fluorescent probes were loaded inside the nanovesicles in order to study their pH-responsiveness and fusogenic properties and it was noted that this process did not modify their physicochemical features. The pH-responsiveness and fusogenic assay demonstrated that the nanovesicles containing Tween21 at different molar ratios were pH-responsive and interacted with a synthetic model of a biological membrane supplemented with Ca2+ in the incubation medium. Fifty percent (molar ratio) of Tween21 was replaced with Tween80, since Tween80 can promote the adsorption of apolipoproteins (A–E) onto the surfaces of nanovesicles without altering their pH-responsiveness or fusogenic properties. In fact this equivalent molar concentration of Tween21 and Tween80 also maintained their degree of interaction with the apolipoproteins (A–E). Doxorubicin hydrochloride-loaded nanovesicles were synthesized and physicochemically characterized in order to obtain nanoformulations suitable for anticancer treatment. The therapeutic nanovesicles showed physicochemical properties similar to those of empty nanoformulations, and maintained pH-responsiveness, fusogenic properties and targeting versus the apolipoproteins (A–E). The doxorubicin hydrochloride was loaded into the nanovesicles using both passive and pH gradient remote loading procedures. The latter provided the nanovesicles with an entrapment efficiency percentage of over 30%, which was much higher than the 10% that was obtained using the passive loading procedure. The entrapment efficiency improved up to 60% for the nanovesicles made from the same molar concentration of Tween21 and Tween80. The anticancer activity of doxorubicin hydrochloride-loaded nanovesicles was further tested in vitro using human neuroblastoma (SH-SY5Y) cells which respond to treatment with this chemotherapeutic drug, but the nanovesicles carrying it must cross the BBB by means of specific receptors before the drug can provide a therapeutic effect in vivo. The anticancer activity of these doxorubicin hydrochloride-loaded nanovesicles was time- and dosage- dependent, and the surfactant components making up the nanoformulations was also a determining factor in the efficiency of their activity. These nanovesicles could provide innovative nanotherapeutics for potential in vitro multidrug targeting therapy.

Currently, six liposomal chemotherapeutics have received clinical approval and many more are in clinical trials or undergoing preclinical evaluation. Liposomes exhibit low toxicity and improve the biopharmaceutical features and therapeutic index of drugs, thereby increasing efficacy and reducing side effects. In this review we discuss the advantages of using liposomes for the delivery of chemotherapeutics. Gemcitabine and paclitaxel have been chosen as examples to illustrate how the performance of a metabolically unstable or poorly water-soluble drug can be greatly improved by liposomal incorporation. We look at the beneficial effects of liposomes in a variety of solid and blood-borne tumors, including thyroid cancer, pancreatic cancer, breast cancer and multiple myeloma.

This study investigates the potential of chitosan microspheres as delivery systems for the anticancer drug gemcitabine. The microspheres were obtained by spray-drying chitosan-gemcitabine solutions containing different amounts of the polyanion dextran sulphate. Morphological characterization by SEM and FIB analyses showed the presence of porous spherical particles having sizes ranging from about 1 to 5 μm. Dextran sulphate improves the technological parameters of the systems by producing very high encapsulation efficiency (about 96%, w/w) and by influencing the in vitro release of gemcitabine. The immediate drug release observed in the system prepared without dextrane sulphate (complete drug release within 30 min) was somewhat reduced by the polyanion (immediate release of 70% (w/w) of the encapsulated drug within 30 min, and subsequent continued release of the remaining 30% of the drug for over 4 days). The anti-tumoral efficacy of the various formulations was tested in vitro on human lung cancer cells (A549) comparing the effects with those of the free drug or drug/dextran sulfate complex. The carriers improved the cytotoxic activity of the drug, particularly the formulation containing the lowest amount of dextran sulphate after 72 h incubation.

A resveratrol/sulfobutylether-β-cyclodextrin inclusion complex was prepared using the freeze-drying method and characterized in solution through UV-vis spectroscopy, solubility phase studies and Job's plot methods. At the solid state it was characterized using the FTIR-ATR technique. Sulfobutylether-β-cyclodextrin has a high affinity for the drug, and forms an inclusion complex with a 1:1 molar ratio both in solution and as a solid sample. It also has a high stability constant (Kc, 10,114 M(-1)). Complexation strongly increases the water solubility of resveratrol (from 0.03 mg/ml to 1.1 mg/ml, at 25 °C) and positively influences its in vitro anticancer activity which was observed on a human breast cancer cell line (MCF-7). In solid phase, FTIR-ATR revealed itself as being a useful technique in elucidating the complexation mechanism, which it did by emphasizing the functional groups involved in the activation of non-covalent "host-guest" interactions.

PLGA microspheres were prepared as a sustained release system for the intra-articular administration of celecoxib (CCB). The microspheres were prepared in the presence of different concentrations of dimethyl-β-cyclodextrin (DM-β-Cyd), by the simple oil-in-water emulsion/evaporation solvent method. The microspheres were evaluated as to surface morphology, size and technological properties (such as encapsulation efficiency, drug loading capacity and drug release). Ex vivo studies on cultures of human chondrocytes were performed in order to evaluate the influence of the polymeric carriers on the pharmacological activity of CCB. All systems ranged from about 1 to 5 μm in size and had a high encapsulation efficiency percentage ranging from about 80% to 90% (w/w), except for CCB-loaded-PLGA microspheres containing the highest amount of DM-β-Cyd, in which a dramatic drop in the encapsulation efficiency was observed (about 54%, w/w). FIB images evidenced the fact that the microspheres had a porous structure in the presence of the highest amount of DM-β-Cyd. The macrocycle modulated the release profiles of CCB from the microspheres, producing in some cases a zero-order kinetic release. Ex vivo biological studies demonstrated that DM-β-Cyd improved the drug's anti-inflammatory activity. Thus, CCB-loaded PLGA/cyclodextrin microspheres may have a potential therapeutic application in the treatment of osteo- and rheumatoid arthritis.

Introduction: Manipulating gene activity represents a promising approach for the treatment of cancer and other diseases. The relatively recent discovery of RNA interference (RNAi) revolutionized therapeutic approaches in this field. RNA effectors can now be used to modify the activity of genes and theoretically control any biological process. Area covered: However, the clinical application of RNAi has been limited by the inefficient delivery of RNA. Challenges associated with the in vivo use of RNAi mediators, include rapid degradation, uptake by the reticular endothelial system and inefficient cellular internalization. To date, various strategies have been developed in order to overcome these pitfalls. Among these approaches, non-viral delivery systems have gained increasing popularity, as they are generally considered safer than their viral counterparts. Expert opinion: The use of cationic polymers, especially polyethylenimine and chitosan, for the in vivo delivery of doubled-stranded RNAs is discussed ...

Water in oil (W/O) polybutylcyanoacrylate nanocapsules containing D-cycloserine (D-CS) for intranasal delivery were prepared by the interfacial polymerization method. Different oils, as external phase, for the preparation of the initial W/O miniemulsions were used and their effect on mean size and other physico-chemical properties were evaluated by photon correlation spectroscopy (PCS) and scanning electron microscopy (SEM) analysis. Two probes at different hydrophilicity were used to verify the internal aqueous nature of the core. Both miniemulsions and nanocapsules mean size and polydispersity index were influenced by the used external phase. Different entrapment efficiency were obtained for D-cycloserine-loaded nanocapsules correlated to the used oil [ranging from 39 to 51% encapsulation efficiency (E.E.)]. In vitro drug release showed an initial burst effect (ranging from 20 to 40%) followed by a slow release of D-CS for all preparations. This study demonstrated that many relevant physico-chemical and technological properties of polybutylcyanoacrylate nanocapsules prepared by interfacial polymerization of miniemulsions are significantly influenced by the external oil phase used.

Anaplastic thyroid carcinoma is one of the most aggressive and lethal solid carcinomas affecting humans. A major limit of the chemotherapeutic agents is represented by their low therapeutic index. In this work, we investigated the possibility of improving the anti-tumoral activity of gemcitabine by using pegylated unilamellar liposomes. Liposomes were made up of 1,2-dipalmitoyl-sn-glycero-3-phospocholine monohydrate/cholesterol/N-(carbonyl-methoxypolyethylene glycol-2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (6:3:1 molar ratio) and they were prepared with a pH gradient to improve the gemcitabine loading capacity. The anti-tumoral efficacy of the liposomal formulation was tested in vitro on human anaplastic thyroid carcinoma cells (ARO) in culture, comparing the effects with those of the free drug. Gemcitabine-loaded unilamellar liposomes had a mean size ∼200 nm with a zeta potential ∼–2mV. The liposomal carrier noticeably improved the anti-tumoral activity of gemcitabine against ARO cells in terms of both dose-dependent cytotoxic effect and of drug exposition effect. Namely, gemcitabine-loaded liposomes showed a cytotoxic effect (58.2% increase of cell mortality at 1 μM with respect to free drug) after 12 h incubation, while the free drug showed a significant activity only after 72 h incubation. Moreover, a significant effect on the cell mortality appeared at 0.1 μM and 100% mortality was detected at a concentration of 1 μM of gemcitabine-loaded liposomes, while the free drug elicited the same effect at a concentration of 100 μM. The improved anti-tumoral activity of gemcitabine determined by the liposomal carrier was due to a greater intracellular uptake. The intracellular gemcitabine levels as a function of time showed a sinusoidal profile with peaks after 2 h, 6 h and 11 h, related to the cellular cycle of ARO. PARP cleavage and DNA fragmentation analysis provided clear evidence of the apoptosis induction in ARO cells by treatment with liposomally entrapped gemcitabine after 72 h incubation. Thus, gemcitabine-loaded liposomes may have a potential therapeutic relevance for the treatment of anaplastic thyroid carcinoma.

Chitosan microspheres loaded moxifloxacin were prepared to obtain sustained release of the drug after intrapulmonary administration. The microspheres were produced by the spray-drying method using glutaraldehyde as the crosslinking agent. The particles were spherical with a smooth but distorted surface morphology and were of small size, ranging from 2.5 to 6.0microm, thus suitable for inhalation. In vitro release studies showed a significant burst effect for all crosslinked systems, followed by a prolonged moxifloxacin release, particularly in the presence of the highest glutaraldehyde concentration. Lipid vesicles made of dipalmitoylphosphatidylcholine (DPPC) were used as an in vitro biomembrane model to evaluate the influence of chitosan microspheres on the interaction of moxifloxacin with biological membranes. Differential scanning calorimetry was used as a simple and non-invasive technique of analysis. Moxifloxacin freely permeates through DPPC liposomes, interacting with the hydrophobic zone of the bilayers (lowering of the DeltaH value and loss of the cooperativity of the main transition peak). Uncrosslinked microspheres rapidly swelled and dissolved releasing free chitosan that was able to interact with liposomes (increase of DeltaH value), probably altering the biomembrane permeability to the drug. Crosslinked microspheres did not show this property. Pulmonary absorption of moxifloxacin-loaded chitosan microspheres was evaluated compared to the free drug. A monolayer of Calu-3 human bronchial epithelial cells mounted on Franz diffusion cells was used as an in vitro bronchial epithelium model. Microspheres retard the absorption of moxifloxacin and within 6h the cumulative amount of permeated drug was about 18%, 11% and 7% (w/w) for free moxifloxacin, moxifloxacin-loaded crosslinked and moxifloxacin-loaded uncrosslinked microspheres, respectively.

Quercetin-3-O-acyl esters (I-VI) were synthesized and their usefulness as quercetin topical prodrugs was evaluated. Quercetin esters were assayed to determine their water stability and solubility, their susceptibility to undergoing enzymatic hydrolysis and their permeation through excised human skin. Quercetin ethyl (I) and hexyl (IV) esters proved poorly stable in aqueous media and they were not assayed further. Among the derivatives tested, quercetin propyl (II) and butyl (III) esters were more water-soluble than the parent drug. Esters II, III and V were readily hydrolyzed by human plasma and esters II and III penetrated excised human skin better than quercetin from aqueous saturated solutions. On the basis of the results obtained, esters II and III could be regarded as promising quercetin topical prodrugs.

Chitosan (CH) was used as a biocompatible and bioadhesive polymer material to prepare solid dispersions as well as hydrogels loaded with dexamethasone sodium phosphate (DSP), a steroidal anti-inflammatory agent clinically used for treatment of different mouth diseases. Binary solid dispersions at various drug-to-polymer weight ratios were prepared by freeze-drying; their direct compression gave tablets which were characterized for the swelling behaviour and drug release in vitro. Similarly, DSP-loaded hydrogels composed of CH and glycerine were prepared and characterized. CH and DSP showed a good physical compatibility. A slow and prolonged release of the drug was observed in vitro from both kinds of systems. The swelling properties of the polymer seemed to be the main parameter affecting the drug release profile from both tablets and hydrogels at the pH value of mouth. In vivo buccal application of both the systems allowed to obtain a prolonged release of DSP, as compared with a glycerine solution of the drug. From the in vitro swelling studies and in vivo test, the 2:1 CH-DSP solid dispersion in particular can be designated for further investigation.

The preparation and technological characterization of nanosphere formulations (NS) containing the anticancer drug paclitaxel (PTX) are reported. Poly(lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) nanospheres (NS) were prepared by a solvent displacement method. They showed a mean particle size in the range 150–300 nm, with a high homogeneity (polydispersity index in vitro drug release and biological activity on the human anaplastic thyroid carcinoma cell line 8305C. The PLGA NS, in particular, showed a cell growth inhibitory activity comparable to the free drug.

We evaluated the ability of two modified cyclodextrins, hydroxypropyl-beta-cyclodextrin (HP-beta-Cyd) and 2,6-di-O-methyl-beta-cyclodextrin (DM-beta-Cyd), to influence the percutaneous absorption through isolated human stratum corneum and epidermis (SCE) of celecoxib (CCB). Previous studies demonstrated that DM-beta-Cyd includes the drug, producing a significant increase of water solubility (0.5 mg/ml at 25 degrees C) and dissolution rate of CCB. In this work chemical-physical characterization studies were performed to evaluate the ability of HP-beta-Cyd to include CCB. We showed that only an external interaction could exist between CCB and HP-beta-Cyd that positively influences the water solubility of the drug (0.12 mg/ml at 25 degrees C for CCB-HP-beta-CyD system and 4.12 x 10(-3) mg/ml at 25 degrees C for free CCB). In vitro percutaneous experiments were performed using samples in solution and in suspension containing different Cyd concentrations. Both HP-beta-Cyd and DM-beta-Cyd enhanced drug flux through SCE by means of an increase of dissolution rate of the drug as well as a direct action on the stratum corneum (SC). Histological analysis of treated SCE showed a protective effect of the two Cyds towards an invasive action shown by CCB on SC.

The ability of 2,6-di-O-methyl-beta-cyclodextrin (DM-beta-Cyd) to include the anti-inflammatory drug celecoxib (CCB) was evaluated. The complex was prepared by kneading and freeze-drying methods and was characterized in the solid state and in aqueous solution. Water solubility and dissolution rate of CCB, in a medium simulating gastric fluid, significantly increased after complexation, with complete dissolution obtained after 30 and 180 min for the freeze-dried and kneaded complexes respectively. Phase solubility studies showed Ap-type diagrams. Stability constants for the 1:1 and 1:2 CCB-DM-beta-Cyd complexes and (1)H-NMR studies suggested a probable 1:1 inclusion complex and only an external interaction for the second Cyd molecule. Thermodynamic parameters of the binding process showed the existence of van der Waals forces between CCB and DM-beta-Cyd. DM-beta-Cyd influenced the permeation of CCB through the CaCo-2 cells monolayer. The increase of permeation observed was due to the fast dissolution rate of the included drug and to a destabilizing action exerted by the macrocycle on the biomembrane.

Biphenylylacetic acid (BPAA) was linked to the free hydroxyl group of 2,6-di-O-methyl-beta-Cyclodextrin (DM-beta-CyD) through an ester linkage to obtain the site specific release of the drug to the colon. The conjugate at 1:1 mole ratio was separated from the reaction mixture by semipreparative reverse-phase HPLC and characterized by 1H-NMR, 13C-NMR, IR spectroscopy, mass spectrometry and elemental analysis. Chemico-physical characteristics, such as water solubility and dissolution rate, were evaluated comparatively to the BPAA-DM-beta-CyD inclusion complex. Hydrolysis rates were investigated in media simulating gastro-intestinal fluids and at pH 7.4 in the presence of porcine liver esterase. A rapid release of the drug was observed at acid pH value. In all cases a first order kinetic was observed, characterized by t1/2 value of 1.19, 19 and 4 h for chemical hydrolysis at pH 1.1, at pH 7.4 and enzymatic hydrolysis, respectively. In vitro permeation studies through caco-2 cells confirmed the ability of DM-beta-CyD to increase the absorption of included BPAA. A slow permeation was observed for the drug conjugate to DM-beta-CyD due to the slow release of BPAA.

The potential application of highly biocompatible o/w microemulsions as topical drug carrier systems for the percutaneous delivery of anti-inflammatory drugs, i.e. ketoprofen, was investigated. Microemulsions were made up of triglycerides as oil phase, a mixture of lecithin and n-butanol as a surfactant/co-surfactant system and an aqueous solution as the external phase. To evaluate the percutaneous enhancing effect of oleic acid, this compound was used as a component of some o/w microemulsions. The topical carrier potentialities of lecithin-based o/w microemulsions were compared with respect to conventional formulations, i.e. a w/o emulsion, a o/w emulsion and a gel. Physicochemical characterisation of microemulsions was carried out by light scattering and zeta potential analyses. Microemulsions showed mean droplet size < 35 nm and a negative zeta potential, that is -39.5 mV for the oleic acid-lecithin microemulsion and -19.7 mV for the lecithin-based microemulsion. The percutaneous adsorption of the various topical formulations was evaluated through healthy adult human skin, which was obtained from abdominal reduction surgery. Ketoprofen-loaded microemulsions showed an enhanced permeation through human skin with respect to conventional formulations. No significant percutaneous enhancer effect was observed for ketoprofen-loaded oleic acid-lecithin microemulsions. The human skin tolerability of various microemulsion formulations was evaluated on human volunteers. Microemulsions showed a good human skin tolerability.

Therapeutic guidelines indicate prostacyclin as the first line of treatment in inflammation and vascular diseases. Prostacyclins prevent formation of the platelet plug involved in primary hemostasis by inhibiting platelet activation and, combined with thromboxane, are effective vasodilators in vascular damage. Trans-Atlantic Inter-Society Consensus Document on Management of Peripheral Arterial Disease II guidelines indicates prostacyclins; in particular, Iloprost, as the first therapeutic option for treating peripheral arterial disease. However, thera- peutic efficacy of Iloprost has witnessed several drawbacks that have occurred in patients receiving repeated weekly ad- ministration of the drug by intravenous infusions. Adverse reactions arose under perfusion with Iloprost for 6 h and pa- tient compliance was drastically decreased. Biomedical devices could provide a suitable alternative to overcome these drawbacks. In particular, elastomeric pumps, filled with Iloprost isotonic solution, could slowly release the drug, thus de- creasing its side effects, representing a valid alternative to hospitalization of patients affected by peripheral arterial dis- ease. However, the home therapy treatment of patients requires long-term stability of Iloprost in solution-loaded elas- tomeric pumps. The aim of this work was to investigate the long-term stability of Iloprost isotonic solution in biomedical devices using Turbiscan technology. Turbiscan Lab Expert (L'Union, France) predicts the long-term stability of suspensions, emulsions and colloidal formulations by measuring backscattering and transmission of particulates dispersed in solution. The formu- lations were evaluated by measuring the variation of physical-chemical properties of colloids and suspensions as a func- tion of backscattering and transmission modifications. In addition, the release profile of Iloprost isotonic solution from the biomedical device was evaluated.