Search

Whereas small siRNA nanocarriers with a size of 10-20 nm exert high tissue-permeability, they encounter the challenge of inefficient adsorption on the cell surface, resulting in poor cellular uptake of siRNA. To solve this dilemma, this study aims to control the hydrophobicity of a small siRNA nanocarrier, unimer polyion complex (uPIC), with a size of ∼10 nm. The uPICs are fabricated to consist of a single pair between siRNA and a smart triblock copolymer comprising hydrophilic poly(2-ethyl-2-oxazoline) (PEtOx), thermoswitchable poly(2-n-propyl-2-oxazoline) (PnPrOx), and cationic poly(l-lysine) (PLL). The PnPrOx segment is dehydrated at 37 °C (>lower critical solution temperature) to enhance the hydrophobicity of uPICs. The uPICs with a hydrophobic domain facilitates cellular uptake of the siRNA payload through stronger binding to the cell surface, compared with control uPICs without a PnPrOx segment, leading to a significantly enhanced gene silencing effect in cultured cancer cells.

Current antisense oligonucleotide (ASO) therapies for the treatment of central nervous system (CNS) disorders are performed through invasive administration, thereby placing a major burden on patients. To alleviate this burden, we herein report systemic ASO delivery to the brain by crossing the blood–brain barrier using glycemic control as an external trigger. Glucose‐coated polymeric nanocarriers, which can be bound by glucose transporter‐1 expressed on the brain capillary endothelial cells, are designed for stable encapsulation of ASOs, with a particle size of about 45 nm and an adequate glucose‐ligand density. The optimized nanocarrier efficiently accumulates in the brain tissue 1 h after intravenous administration and exhibits significant knockdown of a target long non‐coding RNA in various brain regions, including the cerebral cortex and hippocampus. These results demonstrate that the glucose‐modified polymeric nanocarriers enable noninvasive ASO administration to the brain for the treatment of CNS disorders., The sweet spot: Antisense‐oligonucleotide‐loaded glucosylated‐polyion‐complex micelles can be used for RNA knockdown in various brain regions using blood‐glucose level as an external trigger. Glucose transporter‐1 expressed on the brain capillary endothelial cells binds the glucose‐coated nanocarrier and transports it, along with its cargo, across the blood–brain barrier. This could be used for the treatment of disorders of the central nervous system.

A photo-responsive nanovesicle is fabricated by polyion complex (PIC) formation between poly(ethylene glycol) (PEG)-block-polypeptides and photo-reactive oligodeoxynucleotides (PROs)/anti-sense oligonucleotides (ASOs). The ultraviolet (UV) light triggers reversible crosslinking between PROs and ASOs in the vesicular membrane, providing the nanovesicle with switchable stability under physiological conditions. The resulting nanovesicle allows efficient cellular internalization, leading to significant UV-triggered gene knockdown in cultured cells.

For systemic delivery of small interfering RNA (siRNA) to solid tumors, we developed an actively-targeted unimer polyion complex-assembled gold nanoparticle (uPIC-AuNP) by a two-step assembling process. First is the monodispersed uPIC formation from the single molecules of therapeutic siRNA and the block catiomer, cyclic RGD (cRGD) peptide-installed poly(ethylene glycol)-block-poly(l-lysine) modified with lipoic acid (LA) at the ω-end (cRGD-PEG-PLL-LA). Second is the surface decoration of a 20nm-sized AuNP with uPICs. The cRGD-installed uPIC-AuNPs (cRGD-uPIC-AuNP) provided the targetability for selective binding to the cancer and cancer-related endothelial cellular surface, while regulating their size

Vesicular polyion complexes (PICs) were fabricated through self-assembly of rigid cylindrical molecules, small interfering RNAs (siRNAs), with flexible block catiomers of poly(ethylene glycol) (2 kDa) and cationic polyaspartamide derivative (70 units) bearing a 5-aminopentyl side chain. 100 nm-sized siRNA-assembled vesicular PICs, termed siRNAsomes, were fabricated in specific mixing ranges between siRNA and block catiomer. The siRNAsome membrane was revealed to consist of PIC units fulfilling a simple molar ratio (1:2 or 2:3) of block catiomer and siRNA. These ratios correspond to the minimal integer molar ratio to maximally compensate the charge imbalance of PIC, because the numbers of charges per block catiomer and siRNA are +70 and -40, respectively. Accordingly, the ζ-potentials of siRNAsomes prepared at 1:2 and 2:3 were negative and positive, respectively. Cross-section transmission electron microscopic observation clarified that the membrane thicknesses of 1:2 and 2:3 siRNAsomes were 11.0 and 17.2 nm, respectively. Considering that a calculated long-axial length of siRNA is 5.9 nm, these thickness values correspond to the membrane models of two (11.8 nm) and three (17.7 nm) tandemly aligned siRNAs associating with one and two block catiomers, respectively. For biological application, siRNAsomes were stabilized through membrane-cross-linking with glutaraldehyde. The positively charged and cross-linked siRNAsome facilitated siRNA internalization into cultured cancer cells, eliciting significant gene silencing with negligible cytotoxicity. The siRNAsome stably encapsulated dextran as a model cargo macromolecule in the cavity by simple vortex mixing. Confocal laser scanning microscopic observation displayed that both of the payloads were internalized together into cultured cells. These results demonstrate the potential of siRNAsomes as a versatile platform for codelivery of siRNA with other cargo macromolecules.

International audience; Cancer stem-like cells (CSCs) treatment is a plausible strategy for enhanced cancer therapy. Here we report a glucose-installed sub-50-nm nanocarrier for the targeted delivery of small interfering RNA (siRNA) to CSCs through selective recognition of the glucose ligand to the glucose transporter 1 (GLUT1) overexpressed on the CSC surface. The siRNA nanocarrier was constructed via a two-step assembling process. First, a glucose-installed poly(ethylene glycol)-block-poly(l-lysine) modified with lipoic acid (LA) at the omega-end (Glu-PEG-PLL-LA) was associated with a single siRNA to form a unimer polyion complex (uPIC). Second, a 20nm gold nanoparticle (AuNP) was decorated with ~65 uPICs through AuS bonding. The glucose-installed targeted nanoparticles (Glu-NPs) exhibited higher cellular uptake of siRNA payloads in a spheroid breast cancer (MBA-MB-231) cell culture compared with glucose-unconjugated control nanoparticles (MeO-NPs). Notably, the Glu-NPs became more efficiently internalized into the CSC fraction, which was defined by aldehyde dehydrogenase (ALDH) activity assay, than the other fractions, probably due to the higher GLUT1 expression level on the CSCs. The Glu-NPs elicited significantly enhanced gene silencing in a CSC-rich orthotopic MDA-MB-231 tumor tissue following systemic administration to tumor-bearing mice. Ultimately, the repeated administrations of polo-like kinase 1 (PLK1) siRNA-loaded Glu-NPs significantly suppressed the growth of orthotopic MDA-MB-231 tumors. These results demonstrate that Glu-NP is a promising nanocarrier design for CSC-targeted cancer treatment.

Antibody fragment (Fab')-installed polyion complex (PIC) micelles were constructed to improve targetability of small interfering RNA (siRNA) delivery to pancreatic cancer cells. To this end, we synthesized a block copolymer of azide-functionalized poly(ethylene glycol) and poly(l-lysine) and prepared PIC micelles with siRNA. Then, a dibenzylcyclooctyne (DBCO)-modified antihuman tissue factor (TF) Fab' was conjugated to azido groups on the micellar surface. A fluorescence correlation spectroscopic analysis revealed that 1, 2, or 3 molecule(s) of Fab'(s) were installed onto one micellar nanoparticle according to the feeding ratio of Fab' (or DBCO) to micelle (or azide). The resulting micelles exhibited ∼40 nm in hydrodynamic diameter, similar to that of the parent micelles before Fab' conjugation. Flow cytometric analysis showed that three molecules of Fab'-installed PIC micelles (3(Fab')-micelles) had the highest binding affinity to cultured pancreatic cancer BxPC3 cells, which are known to overexpress TF on their surface. The 3(Fab')-micelles also exhibited the most efficient gene silencing activity against polo-like kinase 1 mRNA in the cultured cancer cells. Furthermore, the 3(Fab')-micelles exhibited high penetrability and the highest cellular internalization amounts in BxPC3 spheroids compared with one or two molecule(s) of Fab'-installed PIC micelles. These results demonstrate the potential of anti-TF Fab'-installed PIC micelles for active targeting of stroma-rich pancreatic tumors.

Stem cell therapy requires large numbers of stem cells to replace damaged tissues, but only limited numbers of stem cells can be harvested from a single patient. To obtain large quantities of stem cells with differentiation potential, we explored a spinner culture system using human extracellular matrix (hECM) powders. The hECM was extracted from adipose tissue and fabricated into powders. Human adipose-derived stem cells (hASCs) were isolated, seeded on hECM powders, and cultivated in a spinner flask. The 3-D culture system, using hECM powders, was highly effective for promoting cell proliferation. The number of hASCs in the 3-D culture system significantly increased for 10 days, resulting in an approximately 10-fold expansion, whereas a traditional 2-D culture system showed just a 2.8-fold expansion. Surface markers, transcriptional factors, and differentiation potential of hASCs were assayed to identify the characteristics of proliferated cells in 3-D culture system. The hASCs expressed the pluripotency markers, Oct-4 and Sox-2 during 3-D culture and retained their capacity to differentiate into adipogenic, osteogenic, and chondrogenic lineages. These findings demonstrate that the 3-D culture systems using hECM powders provide an efficient in vitro environment for stem cell proliferation, and could act as stem cell delivery carriers for autologous tissue engineering and cell therapy.

Decellularized tissues composed of extracellular matrix (ECM) have been clinically used to support the regeneration of various human tissues and organs. Most decellularized tissues so far have been derived from animals or cadavers. Therefore, despite the many advantages of decellularized tissue, there are concerns about the potential for immunogenicity and the possible presence of infectious agents. Herein, we present a biomaterial composed of ECM derived from human adipose tissue, the most prevalent, expendable, and safely harvested tissue in the human body. The ECM was extracted by successive physical, chemical, and enzymatic treatments of human adipose tissue isolated by liposuction. Cellular components including nucleic acids were effectively removed without significant disruption of the morphology or structure of the ECM. Major ECM components were quantified, including acid/pepsin-soluble collagen, sulfated glycosaminoglycan (GAG), and soluble elastin. In an in vivo experiment using mice, the decellularized ECM graft exhibited good compatibility to surrounding tissues. Overall results suggest that the decellularized ECM containing biological and chemical cues of native human ECM could be an ideal scaffold material not only for autologous but also for allograft tissue engineering.

Here, we present extracellular matrix (ECM) powders derived from human adipose tissue as injectable cell delivery carriers for adipose tissue engineering. We postulate that human adipose tissue may provide an ideal biomaterial because it contains large amounts of ECM components including collagen. Fresh human adipose tissue was obtained by a simple surgical operation (liposuction). After removing blood and oil components, the tissue was homogenized, centrifuged, freeze-dried, and ground to powders by milling. In an in vitro study, the human ECM powders were highly effective for promotion of cell attachment and proliferation for three-dimensional (3D) cell culture. In in vivo studies, suspensions of human ECM powders containing human adipose-derived stem cells (hASCs) were subcutaneously injected into nude mice. At eight weeks post-injection, numerous blood vessels were observed and the newly formed tissue exhibited adipogenesis with accumulated intracellular small lipid droplets. Overall, the grafts showed well-organized adipose tissue constructs without any signs of tissue necrosis, cystic spaces, or fibrosis. We believe that human ECM powders could act as efficient injectable biomaterials for tissue engineering and have great potential for meeting clinical challenges in regenerative medicine, particularly in relation to adipose tissue engineering.

Human papillomavirus (HPV) E6 and E7 oncogenes are essential for the immortalization and maintenance of HPV-associated cancer and are ubiquitously expressed in cervical cancer lesions. Small interfering RNA (siRNA) coding for E6 and E7 oncogenes is a promising approach for precise treatment of cervical cancer, yet a delivery system is required for systemic delivery to solid tumors. Here, an actively targeted polyion complex (PIC) micelle was applied to deliver siRNAs coding for HPV E6/E7 to HPV cervical cancer cell tumors in immune-incompetent tumor-bearing mice. A cell viability assay revealed that both HPV type 16 and 18 E6/E7 siRNAs (si16E6/E7 and si18E6/E7, respectively) interfered with proliferation of cervical cancer cell lines in an HPV type-specific manner. A fluorescence imaging biodistribution analysis further revealed that fluorescence dye-labeled siRNA-loaded PIC micelles efficiently accumulated within the tumor mass after systemic administration. Ultimately, intravenous injection of si16E6/E7 and si18E6/E7-loaded PIC micelles was found to significantly suppress the growth of subcutaneous SiHa and HeLa tumors, respectively. The specific activity of siRNA treatment was confirmed by the observation that p53 protein expression was restored in the tumors excised from the mice treated with si16E6/E7- and si18E6/E7-loaded PIC micelles for SiHa and HeLa tumors, respectively. Therefore, the actively targeted PIC micelle incorporating HPV E6/E7-coding siRNAs demonstrated its therapeutic potential against HPV-associated cancer.

The natural tendon-to-bone region has a gradient in structure and composition, which is translated into a spatial variation of chemical, physical, and biological properties. This unique transitional tissue between bone and tendon is not normally recreated during natural bone-to-tendon healing. In this study, we have developed a human collagen-based multilayer scaffold mimicking the tendon-to-bone region. The scaffold consists of four different layers with the following composition gradient: (a) a tendon layer composed of collagen; (b) an uncalcified fibrocartilage layer composed of collagen and chondroitin sulfate; (c) a calcified fibrocartilage layer composed of collagen and less apatite; (d) a bone layer composed of collagen and apatite. The chemical, physical, and mechanical properties of the scaffold were characterized by a scanning electron microscope, porosimeter, universal tensile machine, Fourier transform infrared spectrometer, energy dispersive X-ray analysis apparatus, and thermogravimetric analysis apparatus. The multilayer scaffold provided a gradual transition of the physical, chemical, and mechanical environment and supported the adhesion and proliferation of human fibroblasts, chondrocytes, and osteoblasts toward each corresponding matrix. Overall, our results suggest the feasibility of a human collagen-based multilayer scaffold for regeneration of hard-to-soft interface tissues.

Cells in tissues are surrounded by the extracellular matrix (ECM), a gel-like material of proteins and polysaccharides that are synthesized and secreted by cells. Here we propose that the ECM can be isolated from porcine adipose tissue and holds great promise as a xenogeneic biomaterial for tissue engineering and regenerative medicine. Porcine adipose tissue is easily obtained in large quantities from commonly discarded food waste. Decellularization protocols have been developed for extracting an intact ECM while effectively eliminating xenogeneic epitopes and minimally disrupting the ECM composition. Porcine adipose tissue was defatted by homogenization and centrifugation. It was then decellularized via chemical (1.5 M sodium chloride and 0.5% sodium dodecyl sulfate) and enzymatic treatments (DNase and RNase) with temperature control. After decellularization, immunogenic components such as nucleic acids and α-Gal were significantly reduced. However, abundant ECM components, such as collagen (332.9±12.1 μg/mg ECM dry weight), sulfated glycosaminoglycan (GAG, 85±0.7 μg/mg ECM dry weight), and elastin (152.6±4.5 μg/mg ECM dry weight), were well preserved in the decellularized material. The biochemical and mechanical features of a decellularized ECM supported the adhesion and growth of human cells in vitro. Moreover, the decellularized ECM exhibited biocompatibility, long-term stability, and bioinductivity in vivo. The overall results suggest that the decellularized ECM derived from porcine adipose tissue could be useful as an alternative biomaterial for xenograft tissue engineering.

Collagen, the most abundant protein in vertebrates, is a useful biomaterial in pharmaceutical and medical industries. So far, most collagen has been extracted from animals and cadavers. Herein, we suggest human adipose tissue, which is routinely abandoned after liposuction, as a plentiful source of human collagen. In this study, human collagen was obtained from adipose tissue through two successive major steps: (i) extraction of the extracellular matrix (ECM) by pulverization, centrifugation, alkaline, and alcohol treatment; (ii) isolation of collagen from ECM by pepsin treatment in dilute acetic acid. The purified human adipose-derived collagen was characterized by Fourier transform infrared spectroscopy, polyacrylamide gel electrophoresis, amino acid analysis, and circular dichroism spectroscopy. The extracted collagen showed a typical triple helix structure, good thermal stability due to abundant imino acids, and high solubility at acidic pH. The collagen greatly facilitated the adhesion and proliferation of human adipose-derived stem cells and normal human dermal fibroblasts on polystyrene plates. These results suggest that human adipose tissue obtained by liposuction can provide human collagen for use in cosmetics, pharmaceutics, and medicine.

Decellularized human extracellular matrices (ECMs) are an extremely appealing biomaterial for tissue engineering and regenerative medicine. In this study, we decellularized human adipose tissue, fabricated a thin ECM sheet and explored the potential of this human adipose-derived ECM sheet as a substrate to support the formation of tissues other than adipose tissue. Acellular ECM sheets were fabricated from human adipose tissue through successive physical and chemical treatments: homogenization, centrifugation, casting, freeze-drying and sodium dodecyl sulfate treatment. The ECM sheets exhibited good mechanical properties, despite their porous structure. They degraded quickly in the presence of collagenase and the degradation rate increased with the collagenase concentration in phosphate-buffered saline. Five different human cell types, covering a broad range of cells and applications (normal human dermal fibroblasts, human aortic smooth muscle cells, human chondrocytes, human umbilical vein endothelial cells and human adipose-derived stem cells), were seeded onto the ECM sheets. All the human cell types spread well, proliferated and were successfully integrated into the decellularized ECM sheet. Overall, the results suggest that recellularized ECM sheets are a promising substitute for defective or damaged human tissues.

Extracellular matrix (ECM) secreted from the resident cell of tissue is an ideal biomaterial evolved by nature. Cartilage is also built from well-organized ECM components in a gel-like structure with a high collagen and proteoglycan content. Here, we explored cartilage tissue engineering using ECM scaffolds seeded with stem cells. Both scaffolds and stem cells were isolated from human adipose tissue, which is abundant and easily harvested in the human body. The human ECM scaffolds contained various endogenous bioactive factors, including transforming growth factor-beta1 (TGF-β1, 8782±4989 pg/g, dry ECM), insulin growth factor-1 (13319±1388 pg/g, dry ECM), basic fibroblast growth factor (82373±9572 pg/g, dry ECM), and vascular endothelial growth factor (25647±2749 pg/g, dry ECM). A composite of ECM and stem cells was prepared and cultured in chondrogenic medium (with 10 ng/mL TGF-β1 or not) for 45 days. The volumes and weights of the composites increased during culture and the surface gradually became smooth. Cell viability remained high throughout the 45 days of in vitro culture. Composites showed the formation of cartilage-like tissue with the synthesis of cartilage-specific proteins such as collagen and glycosaminoglycan. Important chondrogenic markers were expressed including Sox-9, aggrecan, and collagen type II and XI. These results demonstrate that a cell/ECM composite containing endogenous bioactive factors could provide biochemical cues for the promotion of cartilage formation.

Adipose tissue is found over the whole body and easily obtained in large quantities with minimal risk by a common surgical operation, liposuction. Although liposuction was originally intended for the removal of undesired adipose tissue, it may provide an ideal material for tissue engineering scaffolds. Here we present novel, porous scaffolds prepared from human adipose tissues. The scaffolds were fabricated in a variety of macroscopic shapes such as round dishes, squares, hollow tubes, and beads. The microscopic inner porous structure was controlled by the freezing temperature, with a decrease in pore size as the freezing temperature decreased. The scaffold prepared from human adipose tissue contains extracellular matrix components including collagen. Preliminary in vitro studies showed that human adipose-derived stem cells attached to a human extracellular matrix scaffold and proliferated. This scaffold based on human adipose tissue holds great promise for many clinical applications in regenerative medicine, particularly in patients requiring soft-tissue regeneration.