Search

This study examined associations between criminal recidivism after discharge from forensic treatment and variables related to either the time before the current forensic treatment, or the current forensic treatment, or the follow‐up after discharge. Participants were treated in 12 forensic clinics according to section 63 of the German penal code. A patient was classified as a criminal recidivist when the patient or the aftercare reported that the patient was delinquent at follow‐up. Patients without criminal recidivism were patients for which both perspectives (patient and aftercare) reported no delinquency at follow‐up. Mann–Whitney U‐tests and Fisher's exact tests were performed. Data to classify patients were available for N = 249 patients. Fifteen patients (6%) were classified as criminal recidivists. The follow‐up was M = 12.58 (SD = 1.84) months, and the criminal acts occurred M = 6.00 (SD = 5.55) months after discharge. Differences between patients with and without criminal recidivism were found in pretreatment (young age at first crime, early onset of mental disorder, previous forensic treatments), treatment‐related (disorder due to psychoactive substance use, gradual release abuses, outbreaks, assaults against staff, criminal act during treatment, type of discharge, outcome ratings), as well as follow‐up variables (no specified housing situation, not being abstinent from psychoactive substances, inpatient readmission, course of outpatient treatment, course of mental disorder) (all p

Improvements have been made in identifying the prevalence of risk factors/indicators for violent extremism. A consistent problem is the lack of base rates. How to develop base rates is of equal concern. This study has two aims: (i) compare two methods for developing base rates; the Unmatched Count Technique (UCT) and direct questioning, (ii) generate base rates in a general population sample and compare these to a sample of lone‐actor terrorists (n = 125). We surveyed 2108 subjects from the general population. Participants were recruited from an online access panel and randomly assigned to one of three conditions; direct survey, control, or UCT. Survey items were based on a lone‐actor terrorist codebook developed from the wider literature. Direct questioning was more suitable under our study conditions where UCT resulted in deflation effects. Comparing the base rates identified a number of significant differences: (i) lone‐actor terrorists demonstrated propensity indicators related to a cognitive susceptibility, and a crime‐ and/or violence‐supportive morality more often; the general sample demonstrated protective factors more often, (ii) lone‐actor terrorists demonstrated situational indicators related to a crime‐ and/or violence‐supportive morality more often, whereas the general sample experienced situational stressors more often, (iii) lone‐actor terrorists demonstrated indicators related to exposure to extremism more often. Results suggest there are measurable differences in the prevalence of risk factors between lone‐actor terrorists and the general population. However, no single factor “predicts” violent extremism. This bears implications for our understanding of the interrelation of risk and protective factors, and for the risk assessment of violent extremism.

The aim of this study was to assess postures and movements of the trunk and upper arm during paper mill work, and to determine the extent to which they differ depending on method of assessment. For each of 28 paper mill workers, postures and movements were assessed during three full shifts using inclinometer registration and observation from video. Summary metrics for each shift, e.g., 10th, 50th, and 90th posture percentile, were averaged across shifts and across workers. In addition, the standard deviation between workers, and the standard deviation between shifts within worker were computed. The results showed that trunk and arm postures during paper mill work were similar to other occupations involving manual materials handling, but the velocities of arm movements were lower. While postures determined by inclinometry and observation were similar on a group level, substantial differences were found between results obtained by the two methods for individual workers, particularly for extreme postures. Thus, measurements by either method on individuals or small groups should be interpreted with caution.

Cost-effectiveness analysis is increasingly relevant in humanitarian action. The cost of response has increased exponentially in the past decade, alongside concurrent donor budget restrictions. However, there remains limited comprehension and application of these methods in this field. This paper documents methods developed for use within Action Against Hunger, an international humanitarian organisation, in response to a lack of understanding of this topic within the humanitarian community and limited evidence of the cost-effectiveness of humanitarian action. These methods encompass costs to both implementing institutions and participating communities. Activity-based cost analyses are conducted to assess resources per programme activity. Cost-effectiveness is evaluated using successful programme outcomes, and uncertainty is appraised via sensitivity analysis. This paper aims to advance knowledge, stimulate discussion, and promote the adoption of cost-effectiveness methods for building the evidence base for humanitarian action, including consideration of community costs, to enable analytical outputs that are useful for managers and policymakers alike.

Objective The purpose of the present research is to establish measurement equivalence and test differences in reliability between computerized and pencil-and-paper-based tests of spatial cognition. Background Researchers have increasingly adopted computerized test formats, but few attempt to establish equivalence for computer-based and paper-based tests. The mixed results in the literature on the test mode effect, which occurs when performance differs as a function of test medium, highlight the need to test for, instead of assume, measurement equivalence. One domain that has been increasingly computerized and is thus in need of tests of measurement equivalence across test mode is spatial cognition. Method In the present study, 244 undergraduate students completed two measures of spatial ability (i.e., spatial visualization and cross-sectioning) in either computer- or paper-and-pencil-based format. Results Measurement equivalence was not supported across computer-based and paper-based formats for either spatial test. The results also indicated that test administration type affected the types of errors made on the spatial visualization task, which further highlights the conceptual differences between test mediums. Paper-based tests also demonstrated increased reliability when compared with computerized versions of the tests. Conclusion The results of the measurement equivalence tests caution against treating computer- and paper-based versions of spatial measures as equivalent. We encourage subsequent work to demonstrate test mode equivalence prior to the utilization of spatial measures because current evidence suggests they may not reliably capture the same construct. Application The assessment of test type differences may influence the medium in which spatial cognition tests are administered.

BackgroundPrevious research suggests a relationship between attention-deficit hyperactivity disorder (ADHD) and smoking, alcohol and illicit drug use, however most studies have focused on adolescents or young adults, or clinically ascertained samples.AimsTo analyse population-based data on the relationship between ADHD and at-risk health behaviours in adolescents and adults.MethodData were derived from a Statistics Canada population-based health survey. The association between the diagnosis of ADHD and smoking, alcohol use, and illicit drug use was examined.ResultsIndividuals with ADHD started smoking at a younger age. They consumed more alcoholic drinks on drinking days, and women with ADHD were more likely to engage in binge drinking. Women over the age of 25 and men with ADHD were more likely to meet alcohol-dependence lifetime criteria. People with ADHD were at a greater risk of drug misuse and dependence.ConclusionsPeople with ADHD are more likely to partake in at-risk behaviours.

Background Being a current psychiatric in-patient is one of the strongest statistical risk factors for suicide. It is usually assumed that this strong association is not causal but is a result of the combination of the selection of high-risk patients for admission and the imperfect protection from suicide afforded by psychiatric wards. Logically, a third factor, which is causal, might play a role in the association. It has recently been suggested that adverse experiences in psychiatric units such as trauma, stigma and loss of social role might precipitate some in-patient suicides. Aims To consider whether there is a causal association between psychiatric hospitalisation and suicide. Method We used the framework of Austin Bradford Hill’s criteria for assessing causality in epidemiology to consider the possibility that psychiatric hospitalisation might causally contribute to the extent and variation in in-patient suicide rates. Results The association between psychiatric hospitalisation and suicide clearly meets five of the nine Hill’s criteria (strength of association, consistency, plausibility, coherence and analogy) and partially meets three of the remaining four criteria (gradient of exposure, temporality and experimental evidence). Conclusions Admission to hospital itself might play a causal role in a proportion of in-patient suicides. The safety of being in hospital with respect to suicide could be examined with a large-scale randomised controlled trial (RCT). In the absence of an RCT, the possibility of a causal role provides further impetus to calls to make care in the community more available and psychiatric hospitals more acceptable to patients. Declaration of interest M.M.L. and C.J.R. have provided expert testimony in legal proceedings following in-patient suicide. Copyright and usage © The Royal College of Psychiatrists 2017. This is an open access article distributed under the terms of the Creative Commons Non-Commercial, No Derivatives (CC BY-NC-ND) license.

Observers rank partly visible postures on video frames differently than fully visible postures, but it's not clear if this is due to differences in observer perception. This study investigated the effect of posture visibility on between-observer variability in assessments of trunk and arm posture. Trained observers assessed trunk and arm postures from video recordings of 84 pulp mill shifts using a work sampling approach; postures were also categorized as ‘fully’ or ‘partly’ visible. Between-worker, between-day, and between-observer variance components and corresponding confidence intervals were calculated. Although no consistent gradient was seen for the trunk, right upper arm posture showed smaller between-observer variance when all observers rated a posture as fully visible. This suggests that, partly-visible data, especially when observers disagree as to the level of visibility, introduces more between-observer variability when compared to fully visible data. Some previously-identified differences in daily posture summaries may be related to this phenomenon.

This paper investigates empirically how the international aid community (IAC)—donors and practitioners—considers and implements disaster resilience in a specific country setting, Nepal, and throughout the rest of the world. A key finding is that there is ambivalence about a concept that has become a discourse. On a global level, the IAC utilises the discourse of resilience in a cautiously positive manner as a bridging concept. On a national level, it is being used to influence the Government of Nepal, as well as serving as an operational tool of donors. The mythical resilient urban community is fashioned in the IAC's imaginary; understanding how people create communities and what type of linkages with government urban residents desire to develop their resilience strategies is missing, though, from the discussion. Disaster resilience can be viewed as another grand plan to enhance the lives of people. Yet, regrettably, an explicit focus on individuals and their communities is lost in the process.

Human behaviour is primarily driven by perceptions and this is particularly important in the aftermath of a nuclear accident. One of the main lessons we can draw from the Chernobyl and Fukushima accidents is that once the acute phase of the accident is over, it is important to engage in dialogue with the affected population. Science-based government measures, imposed from above, give rise to much opposition. Examples of this are the aversion of having to live in a contaminated territory, the reluctance of consumers to buy even slightly contaminated food and the opposition of most evacuees to return to their old homes. The continuing controversy within the scientific community about low-dose risks, which results in conflicting messages to the population, is also not very helpful. A way to deal with these problems is by empowering the affected population by establishing a kind of formal consultation structure funded by the authorities but operated by the local community. This will give the population the feeling of having some control over the situation. Such a participatory approach is very demanding for the authorities, but is likely to change the state of mind of the affected people from victims to survivors.

BackgroundTo combat the increasing rate of suicide, basic data on suicidal behaviours reflecting the uniqueness of the locality are needed in sub-Saharan Africa.AimsTo assess the prevalence of suicidal ideation and associated factors.MethodAdults (n=11 246) from the five administrative divisions of Lagos State completed questionnaires detailing suicidal ideation, socio-demographic details, common mental disorders (depression, anxiety and somatic symptoms), alcohol and psychoactive substance use disorders and disability.ResultsThe weighted prevalence of current suicidal ideation was 7.28% (s.e. 0.27). Independently associated factors were older age, being female, not married, low occupational group, depression, anxiety, somatic symptoms and disability.ConclusionsDespite the validity of cross-national surveys, there is need for individual countries to generate complementary local data to explain variability in rates and risk factors in order to plan for suicide prevention or develop timely and effective response.

Accidental events in manufacturing industries can be caused by many factors, including work methods, lack of training, equipment design, maintenance and reliability. This study is aimed at determining the contribution of failures of commonly used industrial equipment, such as machines, tools and material handling equipment, to the chain of causality of industrial accidents and incidents. Based on a case study which aimed at the analysis of an existing pulp and paper company's accident database, this paper examines the number, type and gravity of the failures involved in these events and their causes. Results from this study show that equipment failures had a major effect on the number and severity of accidents accounted for in the database: 272 out of 773 accidental events were related to equipment failure, where 13 of them had direct human consequences. Failures that contributed directly or indirectly to these events are analyzed.

BackgroundLittle is known about explosive anger as a response pattern among pregnant and post-partum women in conflict-affected societies.AimsTo investigate the prevalence and correlates of explosive anger among this population in Timor-Leste.MethodWe assessed traumatic events, intimate partner violence, an index of adversity, explosive anger, psychological distress and post-traumatic stress disorder among 427 women (257 in the second trimester of pregnancy, 170 who were 3–6 months postpartum) residing in two districts of Timor-Leste (response >99%).ResultsTwo-fifths (43.6%) had explosive anger. Levels of functional impairment were related to frequency of explosive anger episodes. Explosive anger was associated with age (>35 years), being married, low levels of education, being employed, traumatic event count, ongoing adversity and intimate partner violence.ConclusionsA combination of social programmes and novel psychological therapies may assist in reducing severe anger among pregnant and post-partum women in conflict-affected countries such as Timor-Leste.

Inconsistencies among testing methods and results in previous research prompted this study that builds upon a systematic usability testing research framework to better understand how interface medium influences users' abilities to detect usability flaws in applications. Interface medium was tested to identify its effects on users' perceptions of usability and abilities to detect usability problems and severe usability problems. Results indicated that medium has no effect on users' abilities to detect usability problems or perceptions of usability. However, results did indicate an interaction between the medium and the tested application in which users were able to identify significantly more usability problems on a higher fidelity medium using a particular application. Results also indicated that as users' perceptions of an application's usability increases, the users are less able to detect usability problems in that application. Usability testing should begin early in the design process, even if low fidelity mediums will be used.

Human performance modeling is a core topic in ergonomics. In addition to deriving models, it is important to verify the kinds of tasks that can be modeled. Drury's law is promising for path tracking tasks such as navigating a path with pens or driving a car. We conducted an experiment based on the observation that paper-cutting tasks using scissors resemble such tasks. The results showed that cutting arc-like paths (1/4 of a circle) showed an excellent fit with Drury's law (R2 > 0.98), whereas cutting linear paths showed a worse fit (R2 > 0.87). Since linear paths yielded better fits when path amplitudes were divided (R2 > 0.99 for all amplitudes), we discuss the characteristics of paper-cutting operations using scissors.

The use of mind maps as a method of building knowledge, planning, organizing activities and ideas can be seen in the literature related to ergonomics. The results of such use are relevant and its use in academic area found. However, regarding to its use in industrial environments, studies can't not be found. With this scenario, and based on the perception of the ergonomist about the importance of using methods such as mind maps in support of human cognition, it seems pertinent to its use in industry sectors whose cognitive demand requires. Given these assumptions, this study aimed to apply the method of Mind Maps in Productive Maintenance sector of a Brazilian paper. The Productive Maintenance sector in the Paper Industry has an important contribution to operational performance. With practical Predictive Maintenance, Preventive Maintenance and Corrective Maintenance, the industry advocates to make the machines to produce paper is not to stop producing when they are programmed to do so. Among the practices cited, the Preventive Maintenance is one that leads to pre-determined intervals in order to reduce the possibility of placing the equipment in a condition below the required level of acceptance. Therefore, this article aims to propose using the tool "mental maps" in order to collaborate in planning and implementation of preventive maintenance activities in the sector of mechanical maintenance of a pulp and paper industry in southern Brazil. The study investigated the maintenance sector through its employees, who went through training about the tool and then use it and ergonomists company.

This study compares two methods for estimating static friction coefficients for skin. In the first method, referred to as the 'tilt method', a hand supporting a flat object is tilted until the object slides. The friction coefficient is estimated as the tangent of the angle of the object at the slip. The second method estimates the friction coefficient as the pull force required to begin moving a flat object over the surface of the hand, divided by object weight. Both methods were used to estimate friction coefficients for 12 subjects and three materials (cardboard, aluminium, rubber) against a flat hand and against fingertips. No differences in static friction coefficients were found between the two methods, except for that of rubber, where friction coefficient was 11% greater for the tilt method. As with previous studies, the friction coefficients varied with contact force and contact area. Static friction coefficient data are needed for analysis and design of objects that are grasped or manipulated with the hand. The tilt method described in this study can easily be used by ergonomic practitioners to estimate static friction coefficients in the field in a timely manner.

Computers are now widely used by children. Tablet computers are becoming widely available and promoted for use by school children. The primary objective of this study was to compare the posture and muscle activity of children using a tablet computer to the posture and muscle activity of children using a desktop computer and paper technology. Eighteen children (mean age 5.6 years) performed a colouring-in task in tablet, desktop and paper conditions. 3-D posture and muscle activity around the neck and shoulder was assessed. Tablet computer use was similar to paper use, with less neutral spinal posture, more elevated scapular posture and greater upper trapezius and cervical erector spinae activity. This was offset by greater variability of posture and muscle activity. Tablet computer use clearly results in different musculoskeletal stresses than desktop computer use. Computer use guidelines need to be appropriate to traditional and emerging technologies. Tablet computers are being promoted for use by adults and children. However, the physical impact of using this type of technology is not known. The findings of this study provide the first tablet-specific evidence to inform guidelines on wise use of tablet computers by children.

Four experiments were conducted to test whether recent developments in display technology would suffice to eliminate the well-known disadvantages in reading from screen as compared with paper. Proofreading speed and performance were equal for a TFT-LCD and a paper display, but there were more symptoms of eyestrain in the screen condition accompanied by a strong preference for paper (Experiment 1). These results were replicated using a longer reading duration (Experiment 2). Additional experiments were conducted to test hypotheses about the reasons for the higher amount of eyestrain associated with reading from screen. Reduced screen luminance did not change the pattern of results (Experiment 3), but positioning both displays in equal inclination angles eliminated the differences in eyestrain symptoms and increased proofreading speed in the screen condition (Experiment 4). A paper-like positioning of TFT-LCDs seems to enable unimpaired reading without evidence of increased physical strain. Practitioner Summary: Given the developments in screen technology, a re-assessment of the differences in proofreading speed and performance, well-being, and preference between computer screen and paper was conducted. State-of-the-art TFT-LCDs enable unimpaired reading, but a book-like positioning of screens seems necessary to minimise eyestrain symptoms.

BackgroundFew studies have examined the contribution of specific disaster-related experiences to post-traumatic stress disorder (PTSD) symptoms.AimsTo examine the roles of peri-traumatic stress and distress due to lingering disaster-related disruption in explaining linkages between disaster exposure and PTSD symptoms among a cohort exposed to the 2010–2011 Canterbury (New Zealand) earthquakes.MethodStructural equation models were fitted to data obtained from the Christchurch Health and Development Study at age 35 (n=495), 20–24 months following the onset of the disaster. Measures included: earthquake exposure, peri-traumatic stress, disruption distress and PTSD symptoms.ResultsThe associations between earthquake exposure and PTSD symptoms were explained largely by the experience of peri-traumatic stress during the earthquakes (β=0.189,PPConclusionsThe results suggest the importance of minimising post-event disruption distress following exposure to a natural disaster.

Objective: To determine prognostic factors for the duration and severity of acute symptoms in subjects with grade 1 or 2 whiplash injuries. Methods: Collision victims presenting to a trauma centre with spinal pain or stiffness were assessed clinically (including a visual analogue scale (VAS)), radiologically, and psychologically (short form 36 (SF36), everyday life quality (EDLQ), pain control questionnaire (FSR)). Collision type and estimated ΔV (change in velocity of the occupant's vehicle) were also assessed. Assessment at six months involved VAS symptom rating, SF36, EDLQ, depression scale (CES-D), and impact of event scale (IES). Results: 43 consecutive collision victims (22 male, 21 female; mean age 29 years (range 19 to 72) with grade 1 or 2 whiplash associated disorders were assessed. Mean ΔV, available for 36 of 43 collisions, was 13.9 (5 to 30) km/h. Thirty two (74%) of the subjects were available for follow up at six months. The mean duration of symptoms was 28 (1 to 180) days in this group. No correlation was found between severity and duration of symptoms and the ΔV of collision or other collision parameters. Patients with initial pain VAS >5 or with duration of symptoms more than 28 days had significant changes in SF36, EDLQ, CES-D, and IES scores at six months, and had initial scores that were predictive of these outcomes. Conclusions: Psychological factors were found to be more relevant than collision severity in predicting the duration and severity of symptoms in collision victims with grade 1 or 2 whiplash associated disorders.

An empowerment initiative involving enhanced fault-management responsibility for operators of complex technology had not led to expected increases in performance, and investigations suggested that this was due to a lack of appropriate feedback. Thus, a feedback intervention was designed to provide specific, timely feedback on operator-correctable faults. It was hypothesized that the intervention would increase operator self-reliance in operating complex technology and promote system performance. Moreover, given the feedback was continuous from the point of intervention, it was predicted that gains would increase over time. Time series analysis of data on engineer call-outs (self-reliance) and machine utilization (performance) showed clear positive effects of the feedback intervention, with call-outs also showing progressive improvement. Self-report data showed no change over time in motivation, but an increase in knowledge dissemination and a reduction in the likelihood of making expensive mistakes. There were no detrimental effects on operator well being. Implications for theory and practice in the management of complex technology are discussed.

This study explores the preferred viewing distance and character size for an electronic paper display for three age groups. Proofreading speed and accuracy ratio were measured during Chinese proofreading tests using the preferred character size and minimum acceptable character size. Data analysis showed that the mean preferred viewing distance for young, middle-aged and older groups was 503, 455 and 444 mm, respectively. The mean preferred character size determined by young, middle-aged and older groups was 42.0, 50.0 and 55.2 min arc, respectively. The proofreading test results indicated that the older group proofread significantly more slowly (1.25 word/sec) than the young (1.76 word/sec) and middle-aged groups (1.74 word/sec). Further, the participants proofread more correctly with their preferred character size (73.3%) than with their minimum acceptable character size (65.4%). This study provides valuable information for the design of Chinese text presentations for various age groups. STATEMENT OF RELEVANCE: This study confirmed the preferred viewing distance and character size for E-paper display were influenced by age. The preferred Chinese character size for young, middle-aged and older people was 42, 50 and 55 min arc, respectively. Therefore, the age factor should be considered for E-paper displays design and video display terminal (VDT) guidelines.

Professional artists seem to develop a preference for certain types of pencils and paper (Akyuz 1995 ). While theaesthetic outcome may be the obvious reason for this preference, haptic feedback may also play a role in selecting media (Prytherch and Jerrard 2001 , 2003 ). This suggestion implies that artists may be sensitive to vibrotactile signals resulting from the interaction between pencil and paper during drawing. Tribological tests showed that H-range leads generate more resistance than B-range pencils when writing on a standard 80 g/m 2 paper. Moreover, a constant stimulus 2IFC procedure showed that Fine Arts students found it easier to discriminate between H-range and HB than B-range and an HB. This suggests that the human haptic system may be sensitive to the vibrotactile signals generated by the differences in resistance resulting from the interaction of leads with the paper's textured surface. Implications for pencil manufacturing and simulations of virtual writing are discussed. Statement of Relevance: The study assesses the tactile sensitivity of Fine Artists to the physical properties of the interaction between different types of lead and a standard printing paper. The results may help in designing more responsive drawing instruments as well as more realistic virtual drawing interfaces.

In 1992, Dillon published his critical review of the empirical literature on reading from paper vs. screen. However, the debate concerning the equivalence of computer- and paper-based tasks continues, especially with the growing interest in online assessment. The current paper reviews the literature over the last 15 years and contrasts the results of these more recent studies with Dillon's findings. It is concluded that total equivalence is not possible to achieve, although developments in computer technology, more sophisticated comparative measures and more positive user attitudes have resulted in a continuing move towards achieving this goal. Many paper-based tasks used for assessment or evaluation have been transferred directly onto computers with little regard for any implications. This paper considers equivalence issues between the media by reviewing performance measures. While equivalence seems impossible, the importance of any differences appears specific to the task and required outcomes.

Objective: To evaluate the effectiveness of a personalised home programme of exercises and strategies for repeat fallers with Parkinson’s disease (PD). Method: Patients with a confirmed diagnosis of idiopathic PD, independently mobile, living at home in the community, experiencing more than one fall in the previous 12 months and with intact gross cognitive function were invited to participate in this randomised controlled trial. Usual care was compared with a personalised 6 week, home based exercise and strategy programme. The primary outcomes were rates of falling at 8 weeks and 6 months. Whether participants had repeat fallen, nearly fallen or experienced injurious falls were also examined. Functional Reach, the Berg Balance Test, PD Self-assessment Scale and the Euro Quol were rated by a blinded assessor. Results: Participants were randomised to the exercise (n = 70) and control (n = 72) groups. There was a consistent trend towards lower fall rates in the exercise group at both 8 weeks and 6 months and lower rates of injurious falls needing medical attention at 6 months. Lower rates of repeat near falling were evident for the exercise group at 8 weeks (p = 0.004) and 6 months (p = 0.007). There was a positive effect of exercises at 6 months on Functional Reach (p = 0.009) and quality of life (p = 0.033). No significant differences were found on other secondary outcomes measures. Conclusion: There was a trend towards a reduction in fall events and injurious falls with a positive effect of exercises on near falls and quality of life.

In this work, we have studied the relationship among the colorimetric properties of different types of paper, having different finishing and grammage. Their color reproduction capability has also been analyzed by using the same printing technology (inkjet printing). On the one hand, we have plotted CIELAB data under the illuminant D50 into constant lightness and hue-angle planes to be compared with MacAdam limits and with Pointer's real-world surface color. On the other hand, we have calculated the volume gamut of the color solid associated to each color paper gamut. Analyzing the results, we have checked that there is not any clear relationship among the colorimetric properties of paper (for instance, CIE whiteness index, etc.) and the color gamut volume associated. However, the colorimetric parameters associated to the printed sample showed a quite good linear correlation between the minimum lightness (or the maximum blackness value) of the printed color chart and the color gamut volume. In particular, the greatest color gamut volume corresponds to the glossy papers taking into account this correlation for inkjet printing. © 2009 Wiley Periodicals, Inc. Col Res Appl, 34, 330–336, 2009

Background: Intelligence was assessed in a group of 74 people with head injury, 16 years after injury (mean 16.77 years; range 10–32 years), and compared with their performance when assessed at an early stage in recovery (mean 1.05 years). Aims: To confirm the presence of long-term impairment relative to estimates of pre-accident ability, to confirm signs of deterioration between early (T1) and late (T2) measures, and to examine relationships between severity of injury, time since injury, length of education, sex and age, and performance on intelligence tests at T2. Expected outcomes: On the basis of evidence from other studies, a significant difference was expected between estimates of pre-accident intelligence and abilities measured at T1 and T2. Deterioration in performance between T1 and T2, and relationships between demographic variables, severity of injury and intellectual performance were also expected. Results and conclusion: The data supported long-term intellectual impairment, but there was no deterioration in abilities between T1 and T2. Performance on intelligence tests was associated with years of education but not with other factors.

The studies reported here examined differences in user behaviour when presented with a low-fidelity paper prototype compared to fully operational product, and evaluated the effectiveness of different types of enhanced labelling of controls. In the first study with a paper prototype, 30 users of high-pressure washers were asked to choose the settings of the temperature control for different cleaning objects, comparing standard with information-enriched control labelling. In the second study, 34 users operated a real high-pressure washer with different forms of control labelling. The results of both studies provided evidence for some benefits of an information-enriched control labelling over traditional temperature-centred controls labelling. Furthermore, a comparative analysis of the data of the two studies suggested that low-fidelity paper prototypes may have to be used with caution. Therefore, designers need to be aware that the behavioural effects induced by different design modifications may be overestimated when using paper prototypes. The implications of the findings are discussed within the framework of an enlarged concept of fidelity.

OBJECTIVES: The primary aim of this study was to determine how Parkinson's disease (PD) affects driving performance. It also examined whether changes in driver safety were related to specific clinical disease markers or an individual's self rating of driving ability. METHODS: The driving performance of 25 patients with idiopathic PD and 21 age matched controls was assessed on a standardised open road route by an occupational therapist and driving instructor, to provide overall safety ratings and specific driving error scores. RESULTS: The drivers with PD were rated as significantly less safe (p

People read more slowly from CRT displays than from paper (see, for example, Gould and Grischkowsky, 1984). This report summarizes ten experiments and several more analyses that seek to explain the cause of this reading-speed difference. Typically, each experiment isolates one variable and studies whether it explains the difference. Results show that no one variable studied (e.g., experience in using CRT displays; display orientation; character size, font, or polarity) explains it. The tentative conclusion is that the difference is due to a combination of variables, probably centering on the image quality of the characters themselves.

Subjects read continuous text for 80 min using microfiche and video display terminals (VDTs) with negative- and positive-appearing images and printed paper copy. Measurements of visual fatigue (ocular discomfort) and reading speed were obtained periodically, and a test of reading comprehension was given at the end of each session. Visual fatigue was significantly greater when subjects read from negative microfiche (light characters, dark background) projected on a metal screen or from the screen of a VDT with positive-appearing images (dark characters, light background). However, when subjects read from microfiche projected on a high-reflectance matte screen or from the screen of a VDT with negative images, visual fatigue was not significantly greater than that reported for the printed materials. Reading speeds tended to be slower for the negative image conditions. but reading comprehension scores were similar for all conditions.

This study explores three formats for the presentation of tangible line graphs to visually handicapped people, using the capsule-paper production process. The formats are L/no-grid (standard x and y axes/data curves on smooth background), box/no-grid (duplicated axes enclose graph space on all four sides/smooth background), and box/grid (duplicated axes/data curves superimposed on grid). Subjects answered questions concerning the coordinate value of points, the difference in coordinate value between two points, and configurational aspects of the data. Questions that involved determining coordinate values were answered most accurately from the box/grid format, followed by the box/no-grid, and, lastly, the L/no-grid. Response times did not differ. A different pattern emerged with questions concerning configurational aspects of the graph. With these there was no difference in accuracy between the formats, but the L/no-grid format led to faster responding than the box/no-grid, which in turn was faster than the box/grid. The practical implications of these data are considered.

Safety analysis was applied in the design of a section at a paper mill. The case study involved analysis of layout, transport system, machines, and a number of different activities. The purpose of the analysis was to find measures to decrease occupational accidents. Three years after the installation was finished the occurrence of accidents was investigated. There was a 56% decrease in the number of accidents; the number of working days lost due to accidents was diminished by 75% as compared to 4 years preceding. The results of the safety analysis were also evaluated with respect to the accidents which had occurred. The methods for safety analysis seem to have been efficient in identifying hazards. The general conclusion of the study is that safety analysis can be an effective tool to decrease occupational accident risks.