Search

Background: Management of periprosthetic joint infection after total hip arthroplasty (THA) has traditionally consisted of a 2-stage approach. However, 1.5-stage exchange has garnered recent interest. We compared 1.5-stage to 2-stage exchange recipients. Specifically, we assessed (1) infection-free survivorship and risk factors for reinfection; (2) 2-year surgical/medical outcomes (eg, reoperations, readmissions); (3) Hip Disability and Osteoarthritis Outcome Scores for Joint Replacement (HOOS-JR); and (4) radiographic outcomes (ie, progressive radiolucent lines, subsidences, and failures)., Methods: We reviewed a consecutive series of 1.5-stage or planned 2-stage THAs. A total of 123 hips were included (1.5-stage: n = 54; 2-stage: n = 69) with mean clinical follow-up of 2.5 years (up to 8 years). Bivariate analyses assessed incidences of medical and surgical outcomes. Additionally, HOOS-JR scores and radiographs were evaluated., Results: The 1.5-stage exchange had 11% greater infection-free survivorship at final follow-up compared to 2 stages (94% versus 83%, P = .048). Morbid obesity was the only independent risk factor demonstrating increased reinfection among both cohorts. No differences in surgical/medical outcomes were observed between groups (P = .730). HOOS-JR scores improved markedly for both cohorts (1.5-stage difference = 44.3, 2-stage difference = 32.5; P < .001). A total of 82% of 1.5-stage patients did not demonstrate progressive femoral or acetabular radiolucencies, while 94% of 2-stage recipients did not have femoral radiolucencies and 90% did not have acetabular radiolucencies., Conclusion: The 1.5-stage exchange appeared to be an acceptable treatment alternative for periprosthetic joint infections after THAs with noninferior infection eradication. Therefore, this procedure should be considered by joint surgeons for treatment of periprosthetic hip infections., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Introduction: Periprosthetic joint infection (PJI) affects many revision total hip arthroplasty (THA) patients, contributing to a concomitant rise in revision costs. Means of decreasing the risk of PJI include the use of antibiotic adjuncts, such as calcium sulphate beads (CSBs). Mixed with antibiotics, the potential benefits of CSBs include dissolvability and antibiotic drug elution. However, information comparing them in aseptic revision is scarce. Therefore, this study investigated CSB utilisation for infection prevention in aseptic revision THA. Specifically, we compared (1) infection rates; (2) lengths of stay; (3) subsequent infection procedures; and (4) final surgical outcome in 1-stage aseptic revision THA patients who did received CSBs to 1-stage aseptic revision THA patients who did not., Methods: A retrospective chart review was performed to identify all patients who underwent an aseptic revision THA between January 2013 and December 2017. Patients who received CSBs ( n = 48) were compared to non-CSB patients ( n = 58) on the following outcomes: postoperative infections, lengths of stay (LOS), subsequent irrigation and debridements (I+Ds), and final surgical outcome, classified as successful THA reimplantation, retained antibiotic spacer, or Girdlestone procedure. Chi-square and t -testing were used to analyse the variables., Results: There was no significant differences found between CSB patients and non-CSB patients in postoperative infections ( p = 0.082), LOS ( p = 0.179), I+Ds ( p = 0.068), and final surgical outcome ( p = 0.211)., Conclusion: This study did not find any statistical difference between CSBs and standard of care in infection rates and surgical outcomes. The advantage of these beads for 1-stage aseptic revisions is questionable.

Case: A 56-year-old woman underwent a left total hip arthroplasty (THA) after developing avascular necrosis after chemotherapeutic treatment of breast cancer. She presented approximately 2 years after index THA with left groin pain and complaints of instability. Imaging revealed pseudodislocation of the ceramic femoral head with erosion through the acetabular component. Intraoperative evaluation revealed a dissociated polyethylene liner, damaged acetabular locking mechanism, metallosis, and well-fixed and aligned components. Treatment consisted of component retention, bone grafting, and dual-mobility liner cementation into the acetabular component., Conclusions: The two-year follow-up demonstrated a pain-free, well-functioning hip, bone graft incorporation, and no evidence of loosening., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article (http://links.lww.com/JBJSCC/B906)., (Copyright © 2022 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: Characterizations and factors influencing longer term performance of second-generation sequentially irradiated and annealed highly cross-linked polyethylene (HXLPE) are lacking. We evaluated patients who underwent total hip arthroplasty with HXLPE at mean 10-year follow-up for (1) linear and volumetric wear rates, (2) patient and implant characteristics, (3) implant survivorships, and (4) functional scores., Methods: We evaluated 130 hips (110 patients) that received HXLPE acetabular liners at a single center. The mean age was 56 years (range, 20-79 years), with a mean follow-up of 10 years (range, 8-15). Radiographic linear (millimeters/year) and volumetric (cubic millimeters/year) wear rates were quantified using radiographic analysis. Survivorship was assessed by all-cause and wear-related revision rates. Functional outcomes were assessed by Short Form 12 and modified Harris Hip Scores., Results: The mean linear wear rate was 0.02 ± 0.03 mm/y, and the mean volumetric wear rate was 12.6 ± 5.3 mm 3 /y. Younger age had higher volumetric wear (total and yearly, P = .01). Increasing body mass index trended toward higher total and yearly linear (both, P ≤ .09) and volumetric wear (both, P ≤ .07). Ten patients required revisions, with an all-cause survivorship of 92% and a wear survivorship of 100%. The mean modified Harris Hip Scores was 84, and the mean Short Form 12 scores were 46 (physical) and 55 (mental)., Conclusion: We observed low linear and volumetric wear rates for HXLPE at 10-year mean follow-up. Younger age and higher body mass index at the time of surgery may be important patient characteristics influencing long-term wear. These results illustrate the potential for this second-generation HXLPE to be an appropriate long-term total hip arthroplasty interface., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Introduction: Dual mobility constructs for THA have been a tremendous advancement for hip arthroplasty surgeons, especially in scenarios where instability is a possibility. While some researchers have reported events of malseating with their use, the authors of the current study believe that this may be avoided by ensuring appropriate surgical technique. Therefore, the purpose of this study was to: (1) describe the surgical techniques that we employ to ensure that the liner is adequately seated; and (2) report the rates of malseating, dislocation, and aseptic loosening among our collective cohort of dual mobility THA patients., Materials and Methods: All patients who underwent THA with a dual mobility construct between January 1, 2010 and December 31, 2018 at four institutions were identified. Those who had less than two years of follow up were excluded. Outcomes of interest included radiographic evidence of liner malseating, aseptic loosening, and dislocation. A total of 1,826 patients who underwent THA with a dual mobility construct were identified. Among these patients, 504 had less than two years of follow up and were excluded from our analysis. The remaining 1,322 patients met our criteria including 941 primary THAs (71.2%) and 381 revision THAs (28.8%)., Results: After a minimum follow-up period of two years, there were only two cases of malseated liners (0.15%). Serial follow ups have demonstrated no movement or changes in the position of the liners over time for both patients. In addition, they have been shown to have normal serum metal ion levels and no clinical complaints after 5.3- and 7.1-year follow up. Seven of 1,322 patients (0.53%) experienced a dislocation. Aseptic loosening of the acetabular cup was diagnosed in one patient 3.4 years postoperatively. In three patients, femoral component loosening occurred after a mean follow-up period of 2.3 years, (1.3 to 3.1 years). Among the 941 primary cases, the incidence of liner malseating was 0.21%, as both patients who experienced this complication were in this subgroup. As stated above, these patients have demonstrated normal serum metal ion levels and no clinical or radiographic sequelae as a result of the liner malseating. The dislocation rate among primary cases was 0.21% (2 of 941). Aseptic loosening of the acetabular component occurred in two (0.21%) while one patient (0.1%) was found to have femoral component loosening at final follow up. Of the 381 revision THAs, there were no cases of liner malseating. Five revision THA patients (1.3%) experienced a dislocation over our study period. Two revision THA patients experienced aseptic loosening of the femoral component (0.79%) at final follow up., Conclusions: The results of this paper demonstrate that malseating is not a prevalent issue with dual mobility THA when appropriate surgical techniques are used. It is hoped that that this paper clarifies the techniques for implantation of these implants and that excellent results can be achieved when care is taken to ensure that liners are well-seated intraoperatively.

Introduction: Proximally coated, morphometric wedge femoral stems illustrated excellent survivorship and clinical outcomes at a minimum five-year postoperative follow up., Materials and Methods: We completed a retrospective review of 186 THA patients from three high-volume surgeons to assess clinical- and patient-reported outcomes five years after implantation with a cementless, proximally coated morphometric wedge femoral stem. We reviewed Gruen zones on early postoperative and mid-term radiographs for signs of osteolysis, loosening, and wear. Clinical- and patient-reported outcomes were compared with previously published two-year outcomes for these femoral stems., Results: No progression of radiolucencies or loosening was observed radiographically when comparing minimum one-year and five-year follow up. Reactive radiodense lines were observed in 23 cases (12.64%), and 13 cases (7.14%) exhibited true radiolucencies of 1-3mm, and all remained unchanged between follow ups or were no longer present on the five-year film. Cortical hypertrophy was noted in Gruen zones 3 and/or 5 in 11 cases (6.04%). No stems were revised for mechanical loosening or for periprosthetic fracture. Nine (9) patients (4.87%) underwent revisions during the follow-up period for periprosthetic infection, femoral head and/or acetabular component revisions, and impingement requiring release and femoral head change. Average Harris Hip Scores were excellent at five years and improved slightly when compared to a two-year follow up; however, this change was not statistically significant. Health-related quality of life mental component and physical component scores were a mean of 48.45 and 43.10 at 5 years, respectively. All cause Kaplan-Meier survivorship of the femoral stem was calculated at 98.4% at an average 65.7 months post implantation. Additionally, this cohort exhibited 100% aseptic survivorship during the follow-up period., Conclusion: Newer-generation morphometric wedge femoral stems for THA exhibit excellent radiographic stability, patient satisfaction, and clinical outcomes five years post implantation.

Introduction: Total hip arthroplasty (THA) is reaching a broader spectrum of younger patients who struggle with incapacitating hip disease. This study aimed to explore national bearing surface trends for young THA recipients. Specifically, we evaluated bearing surface utilization, patient demographics, and hospital demographics in 20- to 50-year-old THA recipients in the United States from 2009 to 2016., Materials and Methods: The National Inpatient Sample database was queried for patients aged 20 to 50 who underwent primary THA from 2009-2016 (n=279,190). Patients were grouped according to bearing surface type (metal-on-polyethylene [MOP], metal-on-metal [MOM], ceramic-on-ceramic [COC], and ceramic-on-polyethylene [COP]). Demographics included sex, age, race, obesity status, age-adjusted Charlson Comorbidity Index (CCI), primary payer, median household income, region, and teaching status. Chi-square analyses were employed for categorical variables, while independent t-tests were utilized for continuous variables., Results: The incidence of THA for patients aged 20 to 50 increased slightly from 33,003 in 2009 to 33,545 in 2016 (p<0.001). Overall, bearing surface type was reported in 46.8% (n=127,876) of THAs. Of the THAs with bearing surface codes, the use of MOP (29.6 to 18.7%) and MOM (39.6 to 4.4%) decreased, while COC (9.0 to 14.3%) and COP (21.8 to 62.6%) utilization increased (p<0.001 for all). Those receiving COC implants had the youngest average age (42 years) (p<0.001). Females were more likely to receive COC (44.2%) or COP (43.6%) implants (p<0.001). Obese individuals were more likely to receive MOP (21.3%) or COP (21.2%) (p<0.001)., Conclusion: Over an 8-year period, considerable shifts in bearing surface trends have occurred across the United States among 20 to 50-year-old patients. Advantages of ceramic femoral heads, along with increased acceptance of highly cross-linked polyethylene, appear to be reasons for the selection of COP over other bearing surfaces.

Introduction: Postoperative dislocation occurs in approximately 2% of primary total hip arthroplasties (THAs). Risk factors associated with dislocation include: age of 70 years or older, body mass index (BMI) of 30 kg/m2 or greater, alcohol abuse, and neuro-degenerative diseases such as multiple sclerosis or Parkinson's disease. As a result, dual-mobility articulations, which have been typically used for revision procedures, have become an increasingly popular option for these "at risk" primary THAs. Few studies have assessed their use in this complex patient population. Therefore, the purpose of this study was to assess: 1) survivorship; 2) radiographic outcomes (cup migration, progressive radiolucencies, and changes in component position); 3) Harris Hip Scores; and 4) complications of the dual-mobility articulation in the setting of primary THA for patients at high risk for dislocation., Materials and Methods: Five participating surgeons performed 495 primary cementless THAs between January 2011 and December 2013. During this time, four of the five surgeons used dual-mobility articulations whenever the acetabular cup size was 52 mm or greater to allow for a 28 mm head, while one surgeon used it when the cup size was less than 52 mm to allow for an effective head size of 38 mm. The remaining surgeon used it for all THAs. Of the 495 patients, 453 (92%) received dual-mobility articulations, of which, 43 patients (10%) were lost to follow-up before the two year minimum. The remaining 410 patients were further assessed to determine those who were considered high risk for dislocation (age = 70 years, BMI =30 kg/m2, had a diagnosis of alcohol abuse, or had a neuro-degenerative disorder). Two hundred forty-nine patients were included in the analysis (103 men, 146 women) who had a mean age of 66 years (range, 24 to 90 years). The mean follow-up was 3.3 years (range, 2 to 5 years). Kaplan-Meier analysis was performed to assess aseptic and all-cause acetabular cup survivorship. Radiographs were evaluated for cup migration, progressive radiolucencies, and any changes in component position. Clinical outcomes were assessed using the Harris Hip Score (HHS), and any surgery-related complications were recorded., Results: The survivorship to aseptic failure (n= 1) and all-cause (aseptic, n= 1; septic, n= 1) Kaplan-Meier acetabular component survivorships were 99.6% (95% confidence interval [CI], 99.1% to 99.9%) and 99.2% (95% CI, 98.5% to 99.9%), respectively. One hip had impingement of an anteverted cup, resulting in trunnion notching, and required revision of the cup and stem. Another hip had a deep infection, which was treated with a two-stage revision procedure. There were no dislocations in this cohort. No progressive radiolucencies or component positional changes were seen on radiographic assessment. Patients reported a mean HHS of 92.5 (range, 47 to 100 points) at final follow-up. Surgical complications included one polyethylene liner that was incompletely seated, and one loose femoral stem, which required revision of only the femoral component., Conclusions: At short-term follow-up, dual-mobility articulations in primary THA offer survivorship, outcomes, and complications comparable to conventional THA designs in patients who are at increased risk for postoperative dislocation. Serious complications, such as polyethylene wear and intraprosthetic dislocations, have occasionally been reported with the use of these components. Therefore, future studies should be prospective, multi-center, and have longer-term follow-up to determine the true benefit of modular dual-mobility articulations in patients who are at high risk for dislocation.

Background: Despite the excellent outcomes associated with primary total hip arthroplasty (THA), implant failure and revision continues to burden the healthcare system. THA failure has evolved and displays variability throughout the literature. In order to understand how THAs are failing and how to reduce this burden, it is essential to assess modes of implant failure on a large scale. Thus, we report: (1) etiologies for revision THA; (2) frequencies of revision THA procedures; (3) patient demographics, payor type, and US Census region of revision THA patients; and (4) the length of stay and total costs based on the type of revision THA procedure., Methods: We queried the National Inpatient Sample database for all revision THA procedures performed between January 1, 2009 and December 31, 2013. This yielded 258,461 revision THAs. Patients specific demographics were identified in order to determine the prevalence of revision procedure performed., Results: Dislocation was the main indication for revision THA (17.3%), followed by mechanical loosening (16.8%). All-component revision was the most common procedure performed (41.8%). Patients were most commonly white (77.4%), aged 75 years and older (31.6%), and resided in the South US Census region (37.0%). The average length of stay for all procedures was 5.29 days. The mean total charge for revision THA procedures was $77,851.24., Conclusion: Dislocation and mechanical loosening is the predominant indication for revision THA in the United States. With the frequency of revision THAs projected to double in the next decade, orthopedists must take steps to mitigate this potentially devastating complication., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Purpose: Due to the high number of total hip arthroplasties (THA) revised due to instability, the use of large femoral heads to reduce instability is justifiable. It is critical to determine whether or not large femoral heads used in conjunction with thin polyethylene liners lead to increased wear rates, which can lead to osteolysis. Therefore, by using validated wear-analysis software, we evaluated linear wear rates in a consecutive cohort of patients who underwent primary THA with thin polyethylene liners., Methods: All patients were selected from a consecutive, prospectively collected database of 241 THAs performed at a single institution by two fellowship-trained joint-reconstruction surgeons between July 2007 and June 2011. These patients were 1:1 matched to a cohort of patients who had conventional-thickness polyethylene liners., Results: No significant differences were observed between linear wear rates of thin or conventional-thickness liners. The Kaplan-Meier survivorship for both cohorts was 100 %, and no cases of polyethylene fracture were observed in either cohort., Conclusions: Our results suggest that according to a mean follow-up of 4 years, the use of thin liners in THA is promising. Longer follow-up is required to assess whether these outcomes are observed later.

Purpose: Postoperative dislocation is one of the most common complications following total hip arthroplasty (THA), and dual mobility articulations have been designed to provide greater hip stability. However, there are few studies that have assessed outcomes of these designs in revision THAs. Our purpose was to evaluate differences in dislocation rates, aseptic survivorship, and patient outcomes between dual mobility articulations and conventional arthroplasties in the revision setting., Methods: Patients who underwent revision THA with dual mobility articulations (n = 60) were matched (1:2) to patients who had conventional single articulation prostheses (n = 120). They were matched for body mass index, age, gender, and Paprosky acetabular defect classification, and were followed up for a mean of 30 months (range, 18 to 52 months). The outcomes were evaluated preoperatively and at final follow-up using Harris Hip Scores, the University of California Los Angeles activity scale, and the Short Form-36 questionnaires., Results: The dual mobility group had lower dislocation (1.7% (1 out of 60) versus 5.8% (7 out of 120)) and aseptic loosening rates (1.7% (1 out of 60) versus 4.2% (5 out of 120)) compared to the control group. There were no significant differences in functional outcomes, activity level, or overall physical and mental health status between the 2 cohorts., Conclusions: When used in the revision setting, dual mobility bearings had fewer dislocations. We believe that these designs may lead to clinically significant improvements in complications while also improving patient reported and functional outcomes, but larger cohort studies are necessary for evaluation.

Unfavorable outcomes from trunnion fretting and corrosion damage have been reported in the literature, gross failures of tapers in primary total hip arthroplasties have been less frequently reported. We report on 5 patients, who presented with gross trunnion failures of modular metal-on-polyethylene or ceramic-on-polyethylene bearings from 5 implant manufacturers, all necessitating revision surgery. None of these patients had an antecedent history of trauma, and the majority presented with pain or instability. No common factor was identified that may be predictive of these type of failures. Since there were 5 different stem designs, this suggests that it may be a rare generic phenomenon occurring with multiple designs. Currently, further investigations are necessary, including retrieval analysis, to identify risk factors that may predispose to such failures., (Copyright © 2014 Elsevier Inc. All rights reserved.)

The effect of acetabular component positioning on the wear rates of metal-on-polyethylene articulations has not been extensively studied. Placement of acetabular cups at abduction angles of more than 40° has been noted as a possible reason for early failure caused by increased wear. We conducted a study to evaluate the effects of different acetabular cup abduction angles on polyethylene wear rate, wear area, contact pressure, and contact area. Our in vitro study used a hip joint simulator and finite element analysis to assess the effects of cup orientation at 4 angles (0°, 40°, 50°, 70°) on wear and contact properties. Polyethylene bearings with 28-mm cobalt-chrome femoral heads were cycled in an environment mimicking in vivo joint fluid to determine the volumetric wear rate after 10 million cycles. Contact pressure and contact area for each cup abduction angle were assessed using finite element analysis. Results were correlated with cup abduction angles to determine if there were any differences among the 4 groups. The inverse relationship between volumetric wear rate and acetabular cup inclination angle demonstrated less wear with steeper cup angles. The largest abduction angle (70°) had the lowest contact area, largest contact pressure, and smallest head coverage. Conversely, the smallest abduction angle (0°) had the most wear and most head coverage. Polyethylene wear after total hip arthroplasty is a major cause of osteolysis and aseptic loosening, which may lead to premature implant failure. Several studies have found that high wear rates for cups oriented at steep angles contributed to their failure. Our data demonstrated that larger cup abduction angles were associated with lower, not higher, wear. However, this potentially "protective" effect is likely counteracted by other complications of steep cup angles, including impingement, instability, and edge loading. These factors may be more relevant in explaining why implants fail at a higher rate if cups are oriented at more than 40° of abduction.

Background: Dislocation remains the leading cause of revision THA. One approach to decreasing prosthetic dislocation risk has been the use of larger femoral head component sizes. The upper limit of head size in metal-on-polyethylene hip arthroplasty has historically been limited because of concerns about increased wear on thin polyethylene components. It is not known to what degree this concern should apply to more wear-resistant polyethylene components., Questions/purposes: We therefore determined (1) in vitro wear rates of polyethylene liners of varying thicknesses, (2) whether there were differences in the microscopic wear characteristics as a function of polyethylene thickness, and (3) whether thin polyethylene components resulted in early catastrophic failures., Methods: We used a hip wear simulator to compare the wear performance of 12 highly crosslinked polyethylene acetabular inserts. The internal diameter of all components was 36 mm, and there were three samples tested of each thickness (1.9, 3.9, 5.9, or 7.9 mm). Testing was conducted for 2.4 million cycles. Gravimetric mass loss was converted to volumetric loss, which was subsequently converted to theoretical linear penetration rates., Results: Wear rates decreased with increasing polyethylene thickness. Mean ± SD wear rates for the 1.9-, 3.9-, 5.9-, and 7.9-mm groups were 5.0 ± 0.5, 3.2 ± 0.3, 2.5 ± 1.1, and 2.2 ± 1.3 mm(3)/million cycles, respectively (p < 0.016). Calculated penetration rates were 0.015, 0.012, 0.011, and 0.010 mm/million cycles, respectively (p < 0.016). There were no catastrophic failures in any group., Conclusions: Thinner polyethylene components demonstrated higher wear rates, although even the highest wear rate observed in the thinnest polyethylene specimen was lower than that commonly reported for noncrosslinked polyethylene components. While encouraging, these findings should be validated in vivo before clinical recommendations can be made.

Nineteen patients (nineteen hips) who had undergone revision total hip arthroplasties using a proximally-coated primary cementless stem were evaluated to determine if a subset of revision arthroplasty patients could be identified where the use of this stem would be appropriate. Of these 19 revisions, 15 were performed for the second stage treatment of infection. The femoral bone deficiency was classified as Paprosky Type I in 6 hips and Type II in 13 hips. At a mean follow-up of 49 months, aseptic stem survivorship was 95% with one revision due to aseptic stem failure. The mean Harris hip scores had improved from a mean of 44 points pre-operatively to 89 points post-operatively. Intra-operatively, there was one complication which included a peri-prosthetic fracture distal to the stem which was treated with an allograft strut with cerclage wires. The authors believe that in type I or II femoral defects, the use of this specific cementless stem may be beneficial in the setting of a revision total hip arthroplasty., (Copyright © 2014 Elsevier Inc. All rights reserved.)

The purpose of this study was to compare the dislocation rates, functional outcomes, and radiographic results between large- and small-diameter femoral head components. A total of 225 patients (248-hips) who received total hip arthroplasties with large-diameter components (36mm or greater) were compared to 501 patients (559-hips) who received smaller diameter components (less than 36mm). Rates of dislocation and revision, Harris hip score, radiographic findings, and complications were compared between the groups. At a mean follow-up of approximately 5years, a significantly higher rate of dislocation was noted in the small-diameter group (10 of 559) compared to the large-diameter group (0 of 248). The overall implant survivorship, mean Harris hip scores, complication rates, and radiographic outcomes were similar for the two groups. The authors believe that large-diameter components significantly reduced the risk of dislocation in susceptible patients, while preserving good to excellent functional outcomes., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Cementless acetabular cups for primary total hip arthroplasty have had excellent results, with failure rates typically less than 5% at up to 10-year follow-up. Tritanium is a 3-dimensional metal interface that has been used for porous biological fixation. The purpose of this study was to review the clinical and radiographic results of the use of Tritanium cups (Stryker Orthopaedics, Mahwah, New Jersey) for primary total hip arthroplasty. Two hundred eighty-eight total hip arthroplasties performed using a porous titanium acetabular cup in 252 patients between 2008 and 2010 were reviewed. One hundred thirty-three men and 119 women with a mean age of 58 years (range, 18-88 years) were included. Mean follow-up was 36 months (range, 24-56 months). Outcomes evaluated were implant survivorship, Harris Hip Score, complications, and radiographic outcomes. At final follow-up, no cup failures had occurred. Mean Harris Hip Score improved from 53 points (range, 33-82 points) preoperatively to 91 points (range, 64-100 points) postoperatively. One complication occurred; a 64-year-old woman with recurrent postoperative effusions underwent hip exploration and required abductor mechanism repair. On radiologic evaluation, no signs existed of progressive radiolucencies or changes in cup position. The survivorship of the Tritanium cup and the low complication rate is comparable with previous studies using other porous-metal prostheses. Longer follow-up study is needed and assessment of the results of using this implant in the revision setting is important., (Copyright 2013, SLACK Incorporated.)

Unlabelled: Two important issues affecting the outcome of total hip arthroplasty have been dislocation and wear, despite excellent clinical results. Larger femoral heads have had success in decreasing dislocation rates; however, there are concerns regarding the subsequent use of thinner polyethylene liners, and their effects on wear rates. Historically, high stresses on thin polyethylene bearings have caused concerns, including rim cracking and catastrophic implant failure with polyethylene thicknesses less than 5 millimeters. Recently, sequentially cross-linked and annealed polyethylene has been shown to reduce the wear rate significantly, compared to conventional ultra-high-molecular-weight polyethylene (UHMWPE) in vitro. The purpose of this study was to analyze the clinical and radiographic outcomes in a cohort of patients treated with sequentially cross-linked and annealed polyethylene bearings with a nominal thickness of 3.8 millimeters. Outcomes were compared to a similar cohort of patients who were treated with total hip arthroplasty during the same time period and utilizing the same polyethylene thickness of 5.8 millimeters or greater., Materials and Methods: We identified 50 patients (53 hips) who had a minimum 2-year clinical and radiographic follow-up after a standard total hip arthroplasty, performed with a thin, sequentially cross-linked and annealed polyethylene bearing surface. There were 15 males and 35 females, with a a mean age of 60 years (range, 16 to 93 years) and a mean body mass index of 28.6 kg/m² (range, 17.2 to 47.5 kg/m²). Overall survivorship was compared to a cohort of 50 patients (53 hips) treated with total hip arthroplasty during the same time period, utilizing the same polyethylene of 5.8 millimeters or greater thickness. Radiographic analysis of polyethylene wear was performed on a subset of 26 hips, using a previously validated two-dimensional computer-aided technique. Volumetric wear was calculated and subsequent annual volumetric and linear wear rates were derived for each patient in the study cohort. Additionally, radiographic analysis was performed to assess for any progressive radio-lucencies or malalignment., Results: The overall survivorship of the study cohort was 100%, compared to a 96% survivorship in the comparison group (two failures due to infection). The mean Harris hip scores in the thin polyethylene cohort improved from 43 points (range, 10 to 67 points) pre-operatively to 91 points (range, 69 to 100 points) postoperatively. Upon radiographic review, no malalignment, radiolucencies, or polyethylene fracture was noted in the study cohort. The mean volumetric wear rate was 0.4122 mm³/year (range, 0.2311 to 0.7310 mm³/year), and the mean linear wear rate was 0.0004 mm/year (range, 0.0002 to 0.0007 mm/year) for the thin polyethylene group. The mean volumetric wear was 0.8839 mm³ (range, 0.4621 to 1.5839 mm³) for this cohort. Excellent clinical and radiographic outcomes were found for patients treated with thin, sequentially cross-linked and annealed polyethylene bearings utilized in total hip arthroplasty, with a nominal thickness of 3.8 millimeters. We have not seen any failures with thin polyethylene liners that have undergone this manufacturing process, which is in contradistinction to results of previously reported thin polyethylene liners. Wear rates were lower than other bearing surfaces at similar periods.

The purpose of this study was to evaluate effectiveness of an advance, at-home chlorhexidine-impregnated skin preparation cloth in decreasing the incidence of deep periprosthetic hip arthroplasty infections. Arthroplasty surgeons at the senior author's institution provided their patients with chlorhexidine-impregnated single-use cloths for use at home the night before and the morning of surgery. Between January 2007 and December 2009, the compliance of this practice, as well as the incidence of periprosthetic infections, was monitored for all patients who underwent hip arthroplasty. Of the 1134 patients who underwent hip arthroplasty, 157 patients completely complied with the preoperative chlorhexidine preparation protocol. There were 14 infections in the group that was not compliant (1.6% infection rate), and there were no infections in the compliant patient population. Based on the results of this study, at-home preoperative patient skin preparation appears to be a simple and cost-effective method to reduce periprosthetic hip infection rates., (Copyright 2010. Published by Elsevier Inc.)

Background: Hip resurfacing has been proposed as an alternative to total hip replacement in patients who have proximal femoral deformities or retained hardware in the proximal aspect of the femur. In these situations, placement of a conventional stemmed hip prosthesis would be difficult or impossible, possibly necessitating a complex osteotomy or a custom prosthesis. The purpose of this study was to evaluate a series of patients who had extra-articular deformities of the proximal aspect of the femur and/or retained hardware and who were managed with a resurfacing hip prosthesis., Methods: Fifteen patients (seventeen hips) who underwent metal-on-metal resurfacing hip replacements were studied. Ten patients (twelve hips) had bowing or other deformities of the femur secondary to trauma, multiple epiphyseal dysplasia, renal osteodystrophy, or proximal femoral focal deficiency. Five patients (five hips) had retained hardware. Twelve of the patients (thirteen hips) had previously been told by orthopaedic surgeons that, due to the deformity or retained hardware, they could not undergo conventional total hip arthroplasty without also undergoing ancillary surgical procedures. We evaluated perioperative factors (operative time and estimated blood loss), Harris hip scores, complications, and failure rates., Results: At a mean follow-up time of three years (range, two to five years), fourteen patients (sixteen hips) were doing well clinically and radiographically. Assessment of the intraoperative records revealed minimal difficulty, with a mean operative time of 104 minutes and a mean blood loss of 621 mL. The mean Harris hip score was 92 points. One patient, a fifty-nine-year-old woman, underwent two subsequent revisions-one for the treatment of a femoral neck fracture, and one for the treatment of acetabular component loosening., Conclusions: Resurfacing hip arthroplasty offers an option for patients when placement of a conventional total hip prosthesis is difficult or impossible because of the presence of proximal femoral deformities or retained hardware in or on the proximal aspect of the femur.

As the number of revision hip arthroplasties continues to increase, alternative reconstructive options may be necessary. Cementation of a polyethylene liner into a well-fixed metal acetabular shell has previously been reported to save bone stock and enhance the pullout strength. This study analyzed whether cementation of various types of mechanically modified or nonmodified liners into a metal shell altered wear characteristics when compared with noncemented modular liners. The authors used nonirradiated and highly cross-linked polyethylene liners that were mechanically modified or left unmodified. Wear in both nonirradiated and highly cross-linked liners was not affected by the cementing process. Wear of the highly cross-linked polyethylene liners was significantly less when compared with the nonirradiated liners. This laboratory study provides quantitative data supporting previous qualitative studies of cementing a polyethylene liner into a metal-backed acetabular shell. Based on this study, cementation of a mechanically modified liner did not affect wear in this study, which simulated 3 years of activity.