Search

Radiostereometric analysis (RSA) is the most accurate method of measuring component migration using radiographs but is restricted to use in prospective studies. Ein-Bild-Roentgen-analyze (EBRA)-Cup can be used retrospectively, but its accuracy to measure component migration following revision is unknown. This study aimed to determine the accuracy of EBRA-Cup measurements of uncemented acetabular component migration after revision total hip replacement (THR). The secondary aim was to compare the number of cases identified using EBRA-Cup and RSA as having proximally migrated above and below 1 mm at 2 years postoperatively. EBRA-Cup measurements were performed on plain antero-posterior pelvic radiographs taken at the same time as RSA radiographs in a prospective cohort of 53 hips undergoing acetabular revision. At 2 years, the mean difference between the RSA and EBRA-Cup measurements for 17 components used to treat pelvic discontinuity was 0.90 mm, significantly greater than the mean difference of 0.28 mm for 36 components without discontinuity (P = .0001). The mean difference between the RSA and EBRA-Cup measurements at 2 years for hips that were reconstructed with an acetabular component alone, 0.28 mm, was significantly lower than hips that were reconstructed with an acetabular component in combination with an augment and/or cage, 0.74 mm (P = .0005). In conclusion, EBRA-Cup can accurately measure migration of uncemented acetabular components used at revision THR. The presence of pelvic discontinuity, and addition of augments and cages, significantly influenced the accuracy of EBRA-Cup measurements. EBRA-Cup and RSA had good agreement on classification of components that migrated proximally above or below 1 mm at 2 years, with 100% sensitivity, and 87% specificity., (© 2020 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

Previous studies have established that up to 1 year post total hip arthroplasty (THA), patients do not recover normal function and the magnitude of hip joint loading remains reduced compared to healthy individuals. However, the temporal nature of the loading profile has not been considered to identify individuals who are at a greater risk of poor functional outcomes following THA. This study aimed to determine changes to the profile and magnitude of the resultant hip joint reaction force before and up to 6 months post-primary THA, and factors associated with atypical loading profiles. Hip joint loading was computed using a personalized lower-limb musculoskeletal model in 43 participants awaiting primary THA for osteoarthritis (mean age: SD = 65, 14 years; body mass index: SD = 30, 5 kg/m 2 ) before and up to 6 months after THA. Atypical, single-peak loading profiles were observed for 11 patients before surgery, where four showed a single peak at 6 months. Patients displaying a single-peak profile walked slower (mean difference: -0.4 m/s) compared to individuals displaying double-peak profile (P = <.001) and had significantly reduced sagittal plane hip range of motion during gait (mean difference -9.6°, P = <.001). Self-reported pain, function, and stiffness did not differentiate between patients with a single or double-peak loading profile. Individuals with a single-peak force profile did not meet the minimal clinically important hip range of motion during gait and would be classified as low-functioning THA patients. Clinical Relevance: The temporal nature of the force profile may help to identify individuals who are at the greatest risk of poor functional outcomes after THA., (© 2020 Orthopaedic Research Society. Published by Wiley Periodicals LLC.)

Marker-based dynamic functional or regression methods are used to compute joint centre locations that can be used to improve linear scaling of the pelvis in musculoskeletal models, although large errors have been reported using these methods. This study aimed to investigate if statistical shape models could improve prediction of the hip joint centre (HJC) location. The inclusion of complete pelvis imaging data from computed tomography (CT) was also explored to determine if free-form deformation techniques could further improve HJC estimates. Mean Euclidean distance errors were calculated between HJC from CT and estimates from shape modelling methods, and functional- and regression-based linear scaling approaches. The HJC of a generic musculoskeletal model was also perturbed to compute the root-mean squared error (RMSE) of the hip muscle moment arms between the reference HJC obtained from CT and the different scaling methods. Shape modelling without medical imaging data significantly reduced HJC location error estimates (11.4 ± 3.3 mm) compared to functional (36.9 ± 17.5 mm, p = <0.001) and regression (31.2 ± 15 mm, p = <0.001) methods. The addition of complete pelvis imaging data to the shape modelling workflow further reduced HJC error estimates compared to no imaging (6.6 ± 3.1 mm, p = 0.002). Average RMSE were greatest for the hip flexor and extensor muscle groups using the functional (16.71 mm and 8.87 mm respectively) and regression methods (16.15 mm and 9.97 mm respectively). The effects on moment-arms were less substantial for the shape modelling methods, ranging from 0.05 to 3.2 mm. Shape modelling methods improved HJC location and muscle moment-arm estimates compared to linear scaling of musculoskeletal models in patients with hip osteoarthritis., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objectives: Hemiarthroplasty induces degenerative changes in the hip joint, which are difficult to evaluate in vivo. Radiostereometric analysis (RSA) is a radiographic measurement technique that has recently been used to measure acetabular cartilage wear in vivo. The aim of the study was to measure acetabular cartilage wear, using this technique, in an ovine model during the first 14 weeks post-implantation., Methods: Measurements of three-dimensional femoral head migration, combined with visual assessments at necropsy and safranin O staining for cartilage integrity, were undertaken., Results: Mean femoral head migration during the first six weeks was 0.525 mm in the medial, 0.144 mm in the cranial, and 0.517 mm in the dorsal direction. The majority of this migration was confirmed to be cartilage wear in the medial and dorsal aspects of the acetabulum at necropsy and with subsequent histological evaluation depicting significant cartilage degeneration., Clinical Significance: Radiostereometric analysis is the current gold standard technique for in vivo assessment of implant migration following total hip replacement. This study has utilized RSA to quantify the amount of early cartilage wear in vivo, which was supported by ex vivo evaluations. Accurately measuring the amount of cartilage wear will allow future studies to compare component material and design characteristics prior to clinical use.

Background: Techniques that ensure femoral bone preservation after primary THA are important in younger patients who are likely to undergo revision surgery., Questions/purposes: We examined femoral stem survival, bone deficiency at revision arthroplasty, and radiographic bone loss in hips implanted with a cemented polished double-taper stem in a cohort of patients younger than 55 years., Methods: We reviewed 197 hips (median patient age, 47 years; range, 16-54 years) after a minimum followup of 2 years (median, 7 years; range, 2-19 years) since primary THA. Clinically, we determined survival to major and minor stem revision and cases of bone deficiency requiring a long stem or impaction bone grafting or created by the need for femoral osteotomy at revision arthroplasty. Radiographically, we assessed stem loosening, femoral osteolysis, and femoral bone deficiency., Results: Stem survival to major revision for aseptic loosening was 100% at 13 years and for any reason was 97% (95% CI, 93-100%). At revision of seven stems, a long stem was used in one hip, a total femoral replacement in one hip and impaction bone grafting in one hip. No femoral osteotomies were required. Bone was preserved in four hips by cement-within-cement stem exchange. No stems were radiographically loose. Proximal osteolysis was present in 11% of femurs. Femoral bone deficiency was graded as Paprosky Type I (97%) or II (3%) and Endo-Klinik Grade 0 (79%) or I (21%)., Conclusions: Cemented polished taper stems have high survival at 13 years in young patients and enable femoral bone preservation for subsequent revision., Level of Evidence: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

We investigated the effect several lower limb positions have on muscles that are detached to perform hip arthroplasty through posterior and lateral approaches. We used string models and computer navigation to measure the length changes in these muscles throughout hip movements in the anatomical planes and while simulating several sitting and lying postures. Piriformis and the obturators were shortened by sitting and lying postures when the femur was externally rotated and abducted; the clinical implication being that such postures have the potential to best protect their repair after a posterior approach. The anterior part of gluteus medius was lengthened with femoral external rotation. This lengthening was prevented, and therefore, theoretically, the gluteus medius repair protected after a lateral approach, by neutral or internal femoral rotation., (Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.)

Background: There are variations in the performance of individual prostheses used in hip replacements. Some of which have unexpectedly higher revision rates – outliers. The Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) has established a standardised multi-stage approach for identifying these devices. This is done by comparing the revision rates of individual prostheses to all other prostheses in class, with the exception of large head metal-on-metal (LHMoM) prostheses. However, improvements in device design and performance over time have required a need to reconsider the comparator group. This study aimed to identify a more specific comparator to better reflect contemporary surgical practice. Methods: The time to first revision was estimated on the data of 413,417 primary total conventional hip replacements undertaken for osteoarthritis (OA) from 01 January 2003 to 31 December 2019. Survivorship analyses with stepwise exclusions were undertaken. The first exclusion was LHMoM, followed by other non-modern bearing surfaces (defined as all the bearing couples except metal or ceramic heads on cross-linked polyethylene and mixed ceramic-on-ceramic), and then devices with modular neck-stem design or used for specific purposes (incl. constrained, dual-mobility, and head size <28 mm). Lastly, all remaining prostheses previously identified as having a higher than anticipated rate of revision (HTARR) were also excluded. Results: These exclusions progressively reduced the cumulative percent revision (CPR) rate. The final comparator, which only includes satisfactory-performed prostheses of contemporary design and use, has a 10-year CPR of 4.30% (95% CI, 4.2–4.41) which is lower than 4.93% (95% CI, 4.84–5.02) for the current comparator used by the AOANJRR (all prostheses excluding LHMOM). Over the study period, 13 additional components were identified utilising the modified comparator. Conclusions: The calculation of the comparator revision rate should be re-evaluated to include only modern prosthesis constructs to ensure that poorly performing prostheses are identified early. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine the effect of surgical change to the acetabular offset and femoral offset on the abductor muscle and hip contact forces after primary total hip arthroplasty (THA) using computational methods. Thirty‐five patients undergoing primary THA were recruited. Patients underwent a computed tomography scan of their pelvis and hip, and underwent gait analysis pre‐ and 6‐months postoperatively. Surgically induced changes in acetabular and femoral offset were used to inform a musculoskeletal model to estimated abductor muscle and hip joint contact forces. Two experiments were performed: (1) influence of changes in hip geometry on hip biomechanics with preoperative kinematics; and (2) influence of changes in hip geometry on hip biomechanics with postoperative kinematics. Superior and medial placement of the hip centre of rotation during THA was most influential in reducing hip contact forces, predicting 63% of the variance (p < 0.001). When comparing the preoperative geometry and kinematics model, with postoperative geometry and kinematics, hip contact forces increased after surgery (0.68 BW, p = 0.001). Increasing the abductor lever arm reduced abductor muscle force by 28% (p < 0.001) and resultant hip contact force by 17% (0.6 BW, p = 0.003), with both preoperative and postoperative kinematics. Failure to increase abductor lever arm increased resultant hip contact force 11% (0.33 BW, p < 0.001). In conclusion, increasing the abductor lever arm provides a substantial biomechanical benefit to reduce hip abductor and resultant hip joint contact forces. The magnitude of this effect is equivalent to the average increase in hip contact force seen with improved gait from pre‐to post‐surgery. [ABSTRACT FROM AUTHOR]

Estimating strain distribution in the acetabulum before and after the development of peri-prosthetic osteolytic lesions secondary to total hip arthroplasty may assist with understanding the pathogenesis of this condition. This could be achieved by performing patient-specific finite element analysis of (1) total hip arthroplasty recipients with developed acetabular osteolytic lesions, and (2) models simulating the patient's pelvis and implant immediately after primary surgery. State of the art patient-specific total hip arthroplasty finite element analysis simulations obtain trabecular bone material properties from Hounsfield units within computed tomography (CT) scans of patients. However, this is not feasible when an implant is already in situ due to metal artefact disruption and, in turn, incorrectly reproduced Hounsfield units. Therefore, alternative methods of assigning trabecular bone material properties within such models were tested and strain results compared. It was found that assigning set material properties throughout the trabecular bone geometry was sufficient for the desired application. Simulating the primary implant and pelvis requires geometric and material based assumptions. Therefore, comparisons were made between strain values obtained from simulated primary models, from state of the art methods using material properties obtained from intact bone within a CT scan, and from models with osteolytic lesions. Strain values found using the finite element models simulating the pelvis before osteolytic lesion developed were considerably closer to those found using state of the art methods than those found for the bone loss models. These models could be used to determine relationships between strain distribution and factors such as bone loss. [ABSTRACT FROM AUTHOR]