Search

Superconducting fault current limiter (SFCL) is a prospective electric devices connected in series in power grid to limit short-circuit current. A 10.5 kV/1.5 kA 3-phase SFCL with HTS coil of 6.24 mH was developed at IEECAS in China in 2005, which was operated in a local power grid in Hunan province for more than 11,000 h, and integrated lately in a superconducting power substation in Baiyin city in 2011 and is still running safely and reliably. In order to reduce the fault response time and enhance the performance of the SFCL, we analyzed the structure characteristics of the SFCL and discussed the variation of currents and voltages of the HTS coil and the bridge during the fault time. The simulation and tests results of power system validate the feasibility of the fast fault identification method. [ABSTRACT FROM AUTHOR]

A superconducting magnetic energy storage system (SMES), with stored energy of 1 MJ and compensation power of 0.5 MVA, has been developed successfully, and now is operating at the world's first superconducting power substation at Baiyin National High-Tech Industrial Development Zone, Gansu Province, China. The SMES employs a high Tc superconducting magnet, which consists of 44 pancakes, operates at 4.2 K in liquid helium, and is cooled down by 4 G-M cryo-coolers. The SMES connects to a 10.5 kV power grid by the use of a power conversion system. Since 16 February, 2011, the SMES has been operating reliably, and providing good-quality power for three companies. [ABSTRACT FROM PUBLISHER]

A 0.5 MVA/1 MJ superconducting magnetic energy storage system (SMES) has been installed in a superconducting power substation. The SMES is designed to compensate active power fluctuations, current harmonics and reactive power of the downstream load. The system configurations and control strategies are described. Experimental and field test results show that the proposed SMES can effectively improve the power quality of the power system. [ABSTRACT FROM PUBLISHER]

An HTS magnet was designed for the 1 MJ/0.5 MVA SMES with Bi2223/Ag tapes. According to the design, it consists of 44 double pancakes with an inductance of 6.28 H, and the rated operating current is 565 A, the maximum magnetic field is up to 5.72 T. In this paper, the insulation of the tapes and the magnet, the fabrication and tests of the 44 double pancakes, the joints among double pancakes and the assemblage of the magnet are described in detail. And then, the fundamental performances testing of the magnet were carried out at liquid nitrogen and helium, respectively. With zero helium vaporization, the 1 MJ HTS magnet was dip in liquid helium and cooled with four G-M cryocoolers. After the whole 1 MJ/0.5 MVA SMES were field installed and tested, it had been put into operation since Feb. 16 of 2011 at a 10.5 kV superconducting power substation locating in Baiyin, Gansu Province of China. [ABSTRACT FROM PUBLISHER]

The new energy revolution which will be dominated by renewable energy will need to develop a corresponding new power grid. Based on the characteristics of renewable energy resources, and the stability problem of AC network, it was proposed that the DC-based transmission grid should be developed in the future. The high Tc Superconducting (HTS) power cable will be a competitive candidate for large-capacity power transmission of renewable energy. In this paper, the progress of the development of a 360 m/10 kA HTS DC power cable is presented, and the prospects of HTS cable is discussed. [ABSTRACT FROM PUBLISHER]

With the increasing depletion of fossil fuels and growing environmental pressure, the mankind has got known the need to vigorously develop the renewable energy and the energy-saving technology. The high Tc superconducting (HTS) power technology will be very helpful to enhance the stability, reliability, and efficiency and transmission capacity of the power grid which would be dominated by the renewable energy. In this paper, we will report the installation and operation of a 10 kV HTS power substation which includes a 75 m/1.5 kA HTS power cable, a 10 kV/1.5 kA HTS fault current limiter, a 1 MJ/0.5 MVA high Tc SMES and a 630 kVA/10 kV/0.4 kV HTS power transformer. [ABSTRACT FROM PUBLISHER]

It is expected that superconducting technologies will play an important role in the future smart grid, because the application of superconductor technologies in the power grid can decrease power losses, relieve overload, avoid higher levels of transmission voltage, increase power transmission capacity, and improve power quality and grid stability. In recent years, high temperature (high-Tc) superconducting power technologies have achieved remarkable progress. High temperature superconducting (HTS) power equipment, such as HTS power cables, HTS transformers, high-Tc superconducting fault current limiters (SFCL), and high-Tc superconducting magnetic energy storage devices (SMES) have been demonstrated in the power grids of many countries. With the development of HTS power equipment, the construction of a HTS power substation is ready. In China, a 10.5 kV HTS power substation is under construction in Baiyin city, Gansu province. The substation integrates a HTS power cable, a HTS transformer, a HTS fault current limiter, and a high-Tc SMES. All these HTS power devices, which were previously developed by the Institute of Electrical Engineering (IEE), Chinese Academy of Sciences (CAS), have been demonstrated to operate for a long time in the commercial power grid. In this paper, the design and constructing progress of the HTS substation are introduced in detail. [ABSTRACT FROM AUTHOR]

Persistent current (PC) operating magnet with bore diameter of about 32 mm was design and developed based on multi- and mono-filament MgB2 wires. The magnet was in a multi-solenoid structure. One pilot coil was wound and joints were fabricated at both ends, connecting it to a superconducting switch for PC operation tests. The magnet was to demonstrate the high field and high temperature performance at different temperatures. Numerical and experimental results demonstrated a promising future of MgB2 wires in low cost magnetic resonance imaging (MRI) systems and high field scientific magnets. [ABSTRACT FROM AUTHOR]

High temperature superconducting (HTS) generator was promising in the wind power applications for its advantages in the weight, size and thermal stability against load fluctuations, especially in the “direct-driven” design. A 100 kW generator was proposed for the demonstration of the feasibility of using HTS in 10 MW wind turbine generators. The electromagnetic design and optimization of the rotor were done using finite element method (FEM). The excitation coil of the rotor was designed considering variable working conditions. According to the numerical results, a number of suggestions in the design and winding techniques of the superconducting rotor were proposed. [ABSTRACT FROM AUTHOR]