Search

A new catalyst, Sm2NdSbO7, was synthesized for the first time by solid-phase sintering. The study utilized X-ray diffraction, transmission electron microscope energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy to examine the structural characteristics of monocrystal BiDyO3, monocrystal Sm2NdSbO7 and Sm2NdSbO7/BiDyO3 heterojunction photocatalysts (SBHP) prepared by solid-phase sintering. The Sm2NdSbO7 photocatalyst owned a pyrochlorite structure, belonged to the face-centered cubic crystal system, possessed a space group of Fd3m and a bandgap width of 2.750 eV. After 145 min of visible light irradiation (145-VLIRD), the removal rate (RMR) of methyl parathion (MP) or total organic carbon of SBHP was 100% or 97.58%, respectively. After 145-VLIRD, the photocatalytic degradation rates of SBHP to MP were 1.13 times, 1.20 times, and 2.43 times higher than those of the Sm2NdSbO7 photocatalyst, the BiDyO3 photocatalyst, and the nitrogen-doped TiO2 catalyst, respectively. The experimental results showed that SBHP had good photocatalytic activity. After four cycles of cyclic degradation experiments with SBHP, the elimination rates of MP were 98.76%, 97.44%, 96.32%, and 95.72%, respectively. The results showed that SBHP had good stability. Finally, the possible degradation pathways and degradation mechanisms of MP were speculated. In this study, we successfully developed a high-efficiency heterojunction catalyst which responded to visible light and possessed significant photocatalytic activity. The catalyst could be used in photocatalytic reaction system for eliminating the harmful organic pollutants from wastewater. [ABSTRACT FROM AUTHOR]

Eu2SmSbO7 and ZnBiEuO4 were synthesized for the first time using the hydrothermal method. Eu2SmSbO7/ZnBiEuO4 heterojunction photocatalyst (EZHP) was synthesized for the first time using the solvothermal method. The crystal cell parameter of Eu2SmSbO7 was 10.5547 Å. The band gap width of Eu2SmSbO7 was measured and found to be 2.881 eV. The band gap width of ZnBiEuO4 was measured and found to be 2.571 eV. EZHP efficiently degraded the pesticide chlorpyrifos under visible light irradiation (VLID). After VLID of 160 min, the conversion rate of the chlorpyrifos concentration reached 100%, while the conversion rate of the total organic carbon (TOC) concentration was 98.02% using EZHP. After VLID of 160 min, the photocatalytic degradation conversion rates of chlorpyrifos using EZHP were 1.13 times, 1.19 times, and 2.84 times those using Eu2SmSbO7, ZnBiEuO4, and nitrogen-doped titanium dioxide (N-doped TiO2), respectively. The photocatalytic activity could be ranked as follows: EZHP > Eu2SmSbO7 > ZnBiEuO4 > N-doped TiO2. The conversion rates of chlorpyrifos were 98.16%, 97.03%, 96.03%, and 95.06% for four cycles of experiments after VLID of 160 min using EZHP. This indicated that EZHP was stable and could be reused. In addition, the experiments with the addition of capture agents demonstrated that the oxidation removal ability of three oxidation free radicals for degrading chlorpyrifos obeyed the following order: hydroxyl radical > superoxide anion > holes. This study examined the intermediates of chlorpyrifos during the photocatalytic degradation of chlorpyrifos, and a degradation path was proposed, at the same time, the degradation mechanism of chlorpyrifos was revealed. This study provides a scientific basis for the development of efficient heterojunction photocatalysts. [ABSTRACT FROM AUTHOR]

A groundbreaking photocatalytic nanomaterial, Dy2NdSbO7, was fabricated smoothly using the hydrothermal synthesis technique for the first time. Apart from that, Dy2NdSbO7/Bi2WO6 heterojunction photocatalyst (DBHP) was initially fabricated using the solvothermal fabrication technique. X-ray diffractometer, Fourier-transform infrared spectrometer, Raman spectrometer, UV-visible spectrophotometer, X-ray photoelectron spectrometer, inductively coupled plasma optical emission spectrometer, transmission electron microscope, and X-ray energy dispersive spectroscopy have been applied to evaluate and investigate the thetastructure, morphology, and physicochemical properties of synthesized samples. The results confirmed that the pyrochlore-type crystal structures of Dy2NdSbO7 belonged to the Fd3m space group with the cubic crystal system and the β-pyrochlore-type crystal structures of Bi2WO6 which belonged to the Pca21 space group with orthorhombic crystal system. Under visible light exposure for 155 min (VLP-155min) using DBHP in the capacity of the photocatalytic nanomaterial, the removal efficiency of chlorpyrifos (CPS) saturation reached 100%. Comparison of CPS removal efficiency after VLP-155min revealed that DBHP exhibited higher removal efficiency than Dy2NdSbO7, Bi2WO6, or N-doped TiO2 photocatalyst, with removal efficiency 1.15 times, 1.23 times, or 2.55 times higher, respectively. Furthermore, the oxidizing capability of free radicals was investigated using trapping agents. Results demonstrated that superoxide anions exhibited the strongest oxidative capability, followed by hydroxyl radicals and holes. The results presented in this study lay a robust groundwork for future investigations and advancements in the field of highly efficient heterostructure material. These findings have significant implications for the development of environmental remediation strategies and provide valuable insights into sustainable solutions for addressing CPS contamination. [ABSTRACT FROM AUTHOR]

An unprecedented photocatalyst, Sm2EuSbO7, was successfully fabricated in this paper, through a high-temperature solid-state calcination method, which represented its first ever synthesis. Additionally, using the solvothermal method, the Sm2EuSbO7/ZnBiSbO5 heterojunction photocatalyst (SZHP) was fabricated, marking its debut in this study. XRD analysis confirmed that both Sm2EuSbO7 and ZnBiSbO5 exhibited pyrochlore-type crystal structures with a cubic lattice, belonging to the Fd3m space group. The crystal cell parameter was determined to be 10.5682 Å or 10.2943 Å for Sm2EuSbO7 or ZnBiSbO5, respectively. The band gap width measured for Sm2EuSbO7 or ZnBiSbO5 was 2.73 eV or 2.61 eV, respectively. Under visible light irradiation for 150 min (VLTI-150 min), SZHP exhibited remarkable photocatalytic activity, achieving 100% removal of parathion methyl (PM) concentration and 99.45% removal of total organic carbon (TOC) concentration. The kinetic constant (k) for PM degradation and visible light illumination treatment was determined to be 0.0206 min−1, with a similar constant k of 0.0202 min−1 observed for TOC degradation. Remarkably, SZHP exhibited superior PM removal rates compared with Sm2EuSbO7, ZnBiSbO5, or N-doped TiO2 photocatalyst, accompanied by removal rates 1.09 times, 1.20 times, or 2.38 times higher, respectively. Furthermore, the study investigated the oxidizing capability of free radicals through the use of trapping agents. The results showed that hydroxyl radicals had the strongest oxidative capability, followed by superoxide anions and holes. These findings provide a solid scientific foundation for future research and development of efficient heterojunction compound catalysts. [ABSTRACT FROM AUTHOR]

Nonradiative recombination at perovskite/charge transport layer interfaces is caused by surface defects and instability, and it is known to limit the long-term development of perovskite solar cells (PSCs). To overcome this issue, the three-dimensional/two-dimensional (3D/2D) perovskite heterojunction has emerged as a possible solution to improve the stabilities and efficiency of PSCs. Herein, we employ a simple one-step method to prepare n-i-p-structured PSCs using a 3D/2D perovskite heterojunction as the absorption layer. For this purpose, the large and non-centrosymmetric 4,4-difluorocyclohexylammonium (DFCHA+) cation, which has been confirmed to be a valid organic spacer in 2D Ruddlesden–Popper (RP) phase perovskites, is employed as an organic ligand for post-treatment of the surfaces of MAPbI3 films. The presence of an ultrathin 2D RP phase perovskite was confirmed on the surface, and the 3D/2D perovskite heterojunction was successfully constructed. Benefitting from surface post-treatment, the density of the surface trap states was reduced with effective passivation. In addition, nonradiative recombination was suppressed, and the interface bands were aligned. As a result, the optimal device achieved a power conversion efficiency of 21.93% with a remarkable open-circuit voltage (VOC) of 1.14 V, a current density (JSC) of 23.71 mA cm−2, and a fill factor of 0.82. Furthermore, owing to the hydrophobicity of the DFCHA+ cation, the unencapsulated device was able to maintain an initial efficiency of 82.3% after storage for 500 h at a relative humidity of ∼45%. We believe that this post-treatment strategy has wide application potential in the field of photovoltaic devices. [ABSTRACT FROM AUTHOR]

A new photocatalyst, Er2FeSbO7, was prepared by solid phase sintering using the high-temperature synthesis method for the first time in this paper. Er2FeSbO7/BiTiSbO6 heterojunction (EBH) catalyst was prepared by the solvent thermal method for the first time. Er2FeSbO7 compound crystallized in the pyrochlore-type architecture and cubelike crystal system; the interspace group of Er2FeSbO7 was Fd3m and the crystal cellular parameter a of Er2FeSbO7 was 10.179902 Å. The band gap (BDG) width of Er2FeSbO7 was 1.88 eV. After visible light irradiation of 150 minutes (VLGI-150min) with EBH as a photocatalyst, the removal rate (RR) of enrofloxacin (ENR) concentration was 99.16%, and the total organic carbon (TOC) concentration RR was 94.96%. The power mechanics invariable k toward ENR consistency and visible light irradiation (VLGI) time with EBH as a photocatalyzer attained 0.02296 min−1. The power mechanics invariable k which was involved with TOC attained 0.01535 min−1. The experimental results showed that the photocatalytic degradation (PCD) of ENR within pharmaceutical waste water with EBH as a photocatalyzer under VLGI was in keeping with the single-order reactivity power mechanics. The RR of ENR with EBH as a photocatalyzer was 1.151 times, 1.269 times or 2.524 times that with Er2FeSbO7 as a photocatalyst, BiTiSbO6 as a photocatalyst, or N-doping TiO2 (N-TO) as a photocatalyst after VLGI-150min. The photocatalytic activity, which ranged from high to low among above four photocatalysts, was as follows: EBHP > Er2FeSbO7 > BiTiSbO6 > N-TO. After VLGI-150min toward three periods of the project with EBH as a photocatalyst, the RR of ENR attained 98.00%, 96.76% and 95.60%. The results showed that the stability of EBH was very high. With appending trapping agent, it could be proved that the oxidative capability for degrading ENR, which ranged from strong to weak among three oxidic radicals, was as follows: superoxide anion > hydroxyl radicals (HRS) > holes. This work provides a scientific basis for the research and oriented leader development of efficient heterojunction catalysts. [ABSTRACT FROM AUTHOR]

Originally, the new catalyst Bi2SmSbO7 was synthesized by the hydrothermal synthesis method or by the solid-phase sintering method at a lofty temperature. A solvothermal method was utilized to prepare a Bi2SmSbO7/ZnBiYO4 heterojunction photocatalyst (BZHP). The crystal structure of Bi2SmSbO7 belonged to the pyrochlore structure and face-centered cubic crystal system by the space group of Fd3m. The cell parameter a was equivalent to 10.835(1) Å (Bi2SmSbO7). With Bi2SmSbO7/ZnBiYO4 heterojunction (BZH) as the photocatalyst, the removal rate (RR) of direct orange (DO) and the total organic carbon were 99.10% and 96.21% after visible light irradiation of 160 min (VLI-160M). The kinetic constant k toward DO concentration and visible light irradiation time (VLI) with BZH as photocatalyst reached 2.167 min−1. The kinetic constant k, which was concerned with total organic carbon, reached 0.047 min−1. The kinetic curve that came from DO degradation with BZH as a catalyst under VLI conformed to the second-order reaction kinetics. After VLI-160M, the photocatalytic degradation (PD) removal percentage of DO with BZH as the photocatalyst was 1.200 times, 1.268 times or 3.019 times that with Bi2SmSbO7 as the photocatalyst, ZnBiYO4 as the photocatalyst or with nitrogen-doped titanium dioxide as the photocatalyst. The photocatalytic activity (PA) was as following: BZH > Bi2SmSbO7 > ZnBiYO4 > nitrogen-doped titanium dioxide. After VLI-160M for three cycles of experiments with BZH as the photocatalyst, the RR of DO reached 98.03%, 96.73% and 95.43%, respectively, which meant that BZHP possessed high stability. By using the experiment of adding a trapping agent, the oxidative purifying capability for degradation of direct orange, which was in gradual depressed order, was as following: hydroxyl radical > superoxide anion > holes. Finally, the possible degradation pathway and degradation mechanism of DO were discussed systematically. A new high active heterojunction catalyst BZHP, which could efficiently remove toxic organic pollutants such as DO from dye wastewater after VLI, was obtained. Our research was meant to improve the photocatalytic property of the single photocatalyst. [ABSTRACT FROM AUTHOR]

The Gd2YSbO7/ZnBiNbO5 heterojunction photocatalyst was synthesized for the first time by the facile in situ precipitation method. The structural properties of a Gd2YSbO7/ZnBiNbO5 heterojunction photocatalyst were characterized by X-ray diffractometer, scanning electron microscope-X ray energy dispersive spectra, X-ray photoelectron spectrograph and UV-Vis diffuse reflectance spectrophotometer. The band gap energy (BGE) of Gd2YSbO7 or ZnBiNbO5 was found to be 2.396 eV or 2.696 eV, respectively. The photocatalytic property of Gd2YSbO7 or ZnBiNbO5 or Gd2YSbO7/ZnBiNbO5 heterojunction photocatalyst (GZHP) was reported. After a visible-light irradiation of 145 minutes (VLI-145 min), the removal rate (RER) of benzotriazole reached 99.05%, 82.45%, 78.23% or 47.30% with Gd2YSbO7/ZnBiNbO5 heterojunction (GZH), Gd2YSbO7, ZnBiNbO5 or N-doped TiO2 (NTO) as photocatalyst. In addition, the kinetic constant k, derived from the dynamic curve toward benzotriazole concentration and visible light irradiation time with GZH as a photocatalyst, reached 0.0213 min−1. Compared with Gd2YSbO7 or ZnBiNbO5 or NTO, GZHP showed maximal photocatalytic activity (PHA) for the photocatalytic degradation of benzotriazole under visible-light irradiation. The RER of total organic carbon during the photocatalytic degradation of benzotriazole reached 90.18%, 74.35%, 70.73% or 42.15% with GZH as a photocatalyst or with Gd2YSbO7, ZnBiNbO5 or NTO as a photocatalyst after VLI-145 min. Moreover, the kinetic constant k, which came from the dynamic curve toward total organic carbon concentration and visible light irradiation time with GZH as a photocatalyst, reached 0.0110 min−1. Based on above results, GZHP showed the maximal mineralization percentage ratio when GZHP degraded benzotriazole. The results showed that hydroxyl radicals was the main oxidation radical during the degradation of benzotriazole. The photocatalytic degradation of benzotriazole with GZH as a photocatalyst conformed to the first-order reaction kinetics. Our research aimed to improve the photocatalytic properties of the single photocatalyst. [ABSTRACT FROM AUTHOR]

The development of novel, noble metal-free semiconductor catalysts with high efficiency is of great importance for the degradation of organic compounds. Among them, amorphous materials have been extensively studied for their unique and commercially useful properties. Here, a completely amorphous, noble metal-free photocatalyst C3N4ZnxOy (x, y = 0.32–1.10) was successfully synthesized from urea and ZnO by a simple high-temperature polymerization method. As the Zn content increased, the short-range ordered structures of the amorphous samples were still retained, as revealed by XPS, FTIR, and ssNMR. Meanwhile, the -CN3 structures were observed to be gradually destroyed, which may make the amorphous state more favorable for photocatalytic reactions. Compared with g-C3N4, the amorphous samples showed significantly reduced intensities in the photoluminescence spectra, indicating that the recombination rate of the photo-generated charge carriers was greatly reduced. It was confirmed that the optimized sample (C3N4Zn0.61O0.61) achieved a photocatalytic efficiency of 86.1% in the degradation of tetracycline hydrochloride under visible light irradiation within 1 h. This is about 2 times higher than that of both g-C3N4 and ZnO. This study emphasizes the importance of the amorphous structure in photocatalytic reactions, and this synthetic strategy may provide an effective model for designing other novel catalysts. [ABSTRACT FROM AUTHOR]

The construction of efficient and stable non-noble metal bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) presents a challenge in electrocatalytic water splitting. CoS 2 is a promising electrocatalyst that could replace precious metals. In this work, a series of Co-MOF precursors having average particle sizes ranging from the nanometer to the micron scale (86–1084 nm) were synthesized in an unprecedented attempt; Co/CoS 2 heterojunction embedded in nitrogen doped carbon framework (Co/CoS 2 @NC) was prepared through further carbonization and sulfurization. The samples were characterized and evaluated by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and electrochemical techniques. The results indicate that when the size of Co-MOF is less than 300 nm, the cubic structure framework easily collapses to form the spherical structure during the carbonization process. The catalytic activity of Co@NC is size-dependent; Co/CoS 2 @NC exhibited the best performance among the series, with an overpotential of 188 mV for HER and 349 mV for OER at a current density of 10 mA cm−2. This work provides experimental guidance for the design and synthesis of low-cost, efficient, and robust Co-based electrocatalysts. • With Co-MOF cubic nanoparticles as the precursor, Co/CoS 2 @NC was prepared through carbonization and sulfurization. • Co/CoS 2 @NC exhibited the best performance among the series. • The catalytic activity of Co@NC is size-dependent. • This work provides a guidance for the design and synthesis of low-cost, efficient, and robust Co-based electrocatalysts. [ABSTRACT FROM AUTHOR]