Search

Eucalyptus globulus wood samples were subjected to hydrothermal processing according to a three-stage, crossflow scheme with intercalated washing stages. The operational conditions for each hydrothermal stage were selected based on previous experiments, as the kinetics and yields depended on the composition of the reaction media. The solid recovery yields as well as the compositions of the various solids and liquids involved in each stage were measured, in order to allow the formulation of material balances. Under the conditions selected, the various stages enabled solid recovery yields in the range 70.8–74.4 g/100 g oven-dry wood, with extensive hemicellulose removal and almost quantitative recovery of both cellulose and lignin in solid phase. The production of valuable polysaccharide-derived products (including saccharides and furans) along the process decreased owing to the different initial composition of the various reaction media. In turn, the generation of monosaccharides from soluble saccharides of oligomeric or polymeric nature was promoted in the second and third stages. The experimental data provided in this study allow a quantitative assessment on the considered process, a basic information for simulation and economic evaluation. [ABSTRACT FROM AUTHOR]

Xylose solutions have been produced from Eucalyptus globulus wood by autohydrolysis (with hot, compressed water) and post-hydrolysis (in presence of sulfuric acid). This two-stage process led to solids enriched in cellulose and lignin (suitable as a substrate for pulping) and liquors containing xylose as the major component. The liquid phase from post-hydrolysis also contained other sugars (glucose, arabinose) and acetic acid. Neutralized liquors (as obtained, or after membrane concentration), were employed (directly or after detoxification by ion exchange) as fermentation media for the production of hemicelluosic bioethanol with the yeast Pichia stipitis CECT 1922T. Under the best conditions assayed (fermentation of neutralized, concentrated and detoxified two-stage hydrolysis liquors), bioconversion took place at nearly stoichiometric yield, with a volumetric productivity of 0.37 g l-1·h-1. [ABSTRACT FROM AUTHOR]

Ionic liquids are valuable tools for biorefineries. This study provides an experimental assessment on the utilization of an acidic ionic liquid (1-butyl-3-methylimidazolium hydrogen sulfate) as a catalyst for furfural production in water/solvent media. The substrates employed in experiments were commercial xylose (employed as a reference compound) or hemicellulosic saccharides obtained by hydrothermal processing of Eucalyptus globulus wood (which were employed as produced, after membrane concentration or after freeze-drying). A variety of reaction conditions (defined by temperature, reaction time and type of organic solvent) were considered. The possibility of recycling the catalyst was assessed in selected experiments. [ABSTRACT FROM AUTHOR]