Search

In metal hydride beds (MHBs), reaction heat transfer often limits the dynamic performance. Heat transfer within the MHB usually involves solid and gas phases. To account for both, an effective thermal conductivity (ETC) is defined. Measuring and predicting the ETC of metal hydride beds is of primary importance when designing hydride-based systems for high dynamics. This review paper presents an integral overview of the experimental and modeling approaches to characterize the ETC in MHBs. The most relevant methods for measuring the ETC of metal hydride beds are described, and the results and scopes are shown. A comprehensive description of the models applied to calculate the ETC of the MHBs under different conditions is developed. Moreover, the effects of operation parameters such as P, T, and composition on the ETC of the presented models are analyzed. Finally, a summary and conclusions about experimental techniques, a historical overview with a classification of the ETC models, a discussion about the needed parameters, and a comparison between ETC experimental and calculated results are provided. [ABSTRACT FROM AUTHOR]

The hybrid hydrogen storage method consists of the combination of both solid-state metal hydrides and gas hydrogen storage. This method is regarded as a promising trade-off solution between the already developed high-pressure storage reservoir, utilized in the automobile industry, and solid-state storage through the formation of metal hydrides. Therefore, it is possible to lower the hydrogen pressure and to increase the hydrogen volumetric density. In this work, we design a non-stoichiometric AB2 C14-Laves alloy composed of (Ti0.9Zr0.1)1.25Cr0.85Mn1.1Mo0.05. This alloy is synthesized by arc-melting, and the thermodynamic and kinetic behaviors are evaluated in a high-pressure Sieverts apparatus. Proper thermodynamic parameters are obtained in the range of temperature and pressure from 3 to 85 °C and from 15 to 500 bar: ΔHabs. = 22 ± 1 kJ/mol H2, ΔSabs. = 107 ± 2 J/K mol H2, and ΔHdes. = 24 ± 1 kJ/mol H2, ΔSdes. = 110 ± 3 J/K mol H2. The addition of 10 wt.% of expanded natural graphite (ENG) allows the improvement of the heat transfer properties, showing a reversible capacity of about 1.5 wt.%, cycling stability and hydrogenation/dehydrogenation times between 25 to 70 s. The feasibility for the utilization of the designed material in a high-pressure tank is also evaluated, considering practical design parameters. [ABSTRACT FROM AUTHOR]

Thermodynamic and heat transfer properties of the 2LiBH4-MgH2 composite (Li-RHC) system are experimentally determined and studied as a basis for the design and development of hydrogen storage tanks. Besides the determination and discussion of the properties, different measurement methods are applied and compared to each other. Regarding thermodynamics, reaction enthalpy and entropy are determined by pressure-concentration-isotherms and coupled manometric-calorimetric measurements. For thermal diffusivity calculation, the specific heat capacity is measured by high-pressure differential scanning calorimetry and the effective thermal conductivity is determined by the transient plane source technique and in situ thermocell. Based on the results obtained from the thermodynamics and the assessment of the heat transfer properties, the reaction mechanism of the Li-RHC and the issues related to the scale-up for larger hydrogen storage systems are discussed in detail. [ABSTRACT FROM AUTHOR]