Search

Active pipe-embedded building envelope is a new kind of pipe-embedded building external wall/roofs. Usually, pipes are embedded in the wall slab or roof slab to allow water circulating in these pipes for heat transfer. Low-grade energy sources can be used for this structure since the enlarged heat transfer surface between the slab mass and water in the pipe allowing for substantial heat flow for relatively small temperature difference. This structure may reduce building cooling/heating load and improve indoor thermal comfort by intercepting the heat/coolth from the ambient air to indoor space. This paper presents a semi-dynamic model of this structure for thermal performance evaluation for system design or indoor environment control etc. This semi-dynamic model is a coupled model. The first part is a simplified dynamic RC model (i.e., resistance and capacitance model). The heat transfer along the width of this structure can be predicted easily by the RC model. The second part is a classical NTU model for evaluating the heat transfer along the pipe and total heat transfer on both surfaces of this structure. A CFD model is developed to act as a virtual experimental test rig to simulate the thermal characteristics of this structure. The simulated results are used to validate this semi-dynamic model and its performance prediction. [ABSTRACT FROM AUTHOR]

Abstract: Low-grade energy sources such as geothermal energy, favorable ambient air and industrial waste heat etc. exist widely. Sufficient utilization of these low-grade energy sources may reduce our daily dependence on high-grade energy sources such as electricity resulting in reduced emission of green house gas for environmental conservation. Active pipe-embedded structure as floor/ceiling usually with water as the medium to carry heat or coolth may utilize these low-grade energy sources for providing space air-conditioning. Compact arrangement of pipes in the structure may significantly enlarge heat transfer surface between the slab mass and water in the pipe allowing substantial heat flows even for relatively small temperature differences. Application of the heat or coolth storage capacity of this structure for preheating or pre-cooling is also one among the advantages of this structure for shifting load and exploiting the nighttime cheap electricity tariff in some regions. This paper presents the technology of the active pipe-embedded structure for utilizing widely existing low-grade energy sources following by a comprehensive review on the heat transfer calculation models of this structure and its practical applications in real building systems for space air-conditioning. This review shows that more works on the active structure, especially simple and transient models for dynamic and accurate performance prediction and easy integration with existing building energy simulation packages, are worthwhile for further promoting the practical application wherever the low-grade energy sources are favorable. [ABSTRACT FROM AUTHOR]

Active pipe-embedded building envelope can allow for substantial heat flow for relatively small temperature difference due to the embedded pipes in the external wall/roof. This structure can directly utilize the low-grade sources for reducing building cooling/heating load and improving indoor thermal comfort by intercepting the heat gain/loss through the building envelope due to the circular water inside the embedded pipe. This paper presents the experimental validation of a semi-dynamic simplified model of the active pipe embedded building envelope. The experiment test rig consists of two environment chambers with one for simulating the ambient environment and one for indoor environment with a pipe-embedded building envelope sample separating both chambers. A small chiller and a buffer tank are installed to provide stable water temperature for the test sample. The temperatures and heat fluxes on both sides of the test sample, the inlet and outlet water temperature as well as flow rate are measured. The measured boundary conditions are used as the inputs of the semi-dynamic simplified model for calculating the thermal performance of the active structure. The results show the semi-dynamic simplified model can predict the semi-steady or pure dynamic thermal performance of the pipe-embedded building envelope very well by comparing with the measurement. [ABSTRACT FROM AUTHOR]