Search

The variability and inhomogeneity of solar energy limits the development of solar heating systems (SHS) in many fields. In order to improve the utilization efficiency of SHS, this paper takes three typical cities (Xi'an, Dunhuang, Lhasa) as the research object, studies the operation state of SHS in student dormitory buildings, and puts forward a corresponding optimization strategy. The research shows that the reduction of water supply temperature will improve the operation efficiency and energy saving effect of a spontaneous combustion heat pump and that there is an optimal volume of heat storage water tank (HSWT), which can make the energy saving effect of SHS run better. The optimization of the SHS shows the water supply temperature is 35 °C, and the optimal volume of HSWT is 15 m3 in the "Resource-general area (Ⅲ)" represented by Xi'an, 25 m3 in the "Resource-rich area (Ⅱ)" represented by Dunhuang, and 40 m3 in the "Resource-richer area (Ⅰ)" represented by Lhasa. With the increase in the abundance of solar energy resources in the region, the optimal volume of HSWT also increases. Meanwhile, the solar energy contribution rate of the three regions in descending order is 61.3% (Lhasa), 32.8% (Dunhuang), and 25.9% (Xi'an). After optimization, the contribution of SHS increased by about 5%. The research results will help improve the efficiency of SHS in cold areas of China and make the system more efficient and energy efficient during operation. [ABSTRACT FROM AUTHOR]

• Annual dynamic simulations of solar water heating system with and without phase change materials were conducted. • A thorough parametric study was carried out in different climate zones. • Optimization of phase change temperature and design parameters usage amount was performed. • The highest power saving rate using phase change material is 31% in Lhasa. • The highest heat loss saving rate using phase change material is 9.9% in Guangzhou. Recently there have been many reports on the application of phase change materials (PCM) in solar water heating system (SWHS). However, there are some doubts and different views in this field, since the sensitivity of the system to the PCM design parameters and external conditions. In this study, a typical SWHS with a PCM storage tank is proposed to overcome the existing problems. The mathematical model is established and validated against experimental data. Annual simulations have been done under a typical user load and different PCM design parameters (phase change temperature, PCM usage amount) among six cities which have different meteorological conditions. The results indicate that the application of PCM in SWHS can reduce the power consumption of electric auxiliary heater (EAH) and the heat loss, but the benefits vary widely by regions and PCM design parameters. The highest power saving rate is up to 31% in Lhasa which has extremely abundant solar energy, while for the heat loss saving rate the highest value is 9.9% in Guangzhou which is located in the hot summer and warm winter zone. Besides, a parametric study has been conducted to explore the power saving potentials with different PCM design parameters in different regions, as well as to discuss the optimal phase change temperature and the PCM usage amount. This study aims to provide theoretical references and suggestions for the design of the PCM storage tank in SWHS. [ABSTRACT FROM AUTHOR]

Abstract Integration of a latent heat energy storage into a solar heating system has become a well-known engineering practice that can bridge the mismatch between the heat demand of the served building and heat supply from the solar heating system. However, control schemes, energy performance analysis, characterization and optimization of such a system under the Tibet climatic/altitude conditions still remain a challenge. This research aims to investigate a PCM-integrated solar heating system applicable to Tibet which is unique in terms of the altitude, solar radiation, atmospheric pressure and water boiling temperature etc. The whole process involves (1) identification of the unique features of Tibet climate and altitude and relevant requirements to the solar system; (2) design of a PCM-integrated solar heating system based on a selected building in Lhasa and planning the potential control strategies appropriate to such a system; (3) analysis of the system's energy performance under different operational schemes; and (4) recommendation of the most appropriate system operational scheme and design strategy. A dynamic simulation model was established and applied to study the energy performance of such a system, in which the solar energy usage rate is defined as the performance evaluation index. It is found that the operational scheme 'A' has the best energy saving effect, followed by operational schemes B and C. The system presents a more favorite energy performance between 9:00 h–18:00 h, compared to other time slots in a typical winter day. Change in operational schemes creates a significant impact on the energy saving effect of the system. The results help wide and fast deployment of the PCM-integrated solar heating system and enable the determination of the best performing operational scheme and associated performance data appropriate to Tibet or similar regions in the world, thus making a significant contribution to the saving of fossil fuel energy consumption and reduction of the carbon emission on the regional and global scales. Highlights • Energy performance and operational schemes of a Tibet-focus SHS-PCM was investigated. • Operational scheme A is the best and C is the worst in terms of energy saving rate. • Daytime heating achieved a higher energy efficiency compared to the full day heating. • Energy saving rates for three schemes are 64%, 50% and 46% for the full day heating. • Energy saving rates for three schemes are 92%, 79% and 24% for daytime heating. [ABSTRACT FROM AUTHOR]