Search

Net-zero energy buildings (NZEBs) have been considered as an efficient solution to limit the growing energy consumption and pollution emissions from buildings. The configurations and the capacities of the implemented renewable energy systems in NZEBs should be wisely selected to ensure the intended performance objective. This study aims to optimize, investigate and compare six renewable energy solution sets for designing NZEBs in three different climates: Indore (cooling dominant), Tromso (heating dominant), and Beijing (mixed climate). The optimization is carried out using a multi-criteria decision-making methodology. The implemented methodology is composed of two phases. In the first phase, the optimal sizes of solution sets in each climate are derived and analyzed. The effectiveness of optimal solution sets is evaluated with respect to economy, environment, energy and grid stress. In the second phase, recommendations for each region are offered according to the overall performance evaluation results. The evaluation criteria include life cycle cost, payback period, levelized cost of energy, CO 2 eq emissions, grid interaction index, load matching index, and total energy consumption. The analyses show that, in Indore (hot climate), it is recommended to utilize the solution set composed of air source heat pump for cooling and flat plate solar collectors for domestic hot water (DHW) production. In Tromso (cold climate), the use of a biodiesel generator is promising to produce both electricity and hot steam for heating as well as DHW use. In Beijing (mixed climate), it is recommended to utilize electric chillers for cooling and natural gas condensing boiler for heating and DHW usage. • Renewable energy solution sets for net zero energy building are optimized. • Hot, cold and mixed climates are investigated. • Building performance is analyzed in terms of energy, cost, and CO 2eq emissions. • Load matching and grid stress analysis is conducted. • Suitable design options for each climate are offered. [ABSTRACT FROM AUTHOR]

Abstract: Water heating contributes an important proportion of residential energy consumption all around the world. Different kinds of domestic hot-water production systems exist. The operational cost, environmental effect and performance of these systems differ according to various energy sources, climates, system types and system designs. Hence, the proper choice of a domestic hot-water system could save energy, protect nature and reduce operational costs, significantly. This paper illustrates, to the best of the author's knowledge, the existing water-heating systems all along with the principle, advantages, disadvantages and state-of-the-art for each. Six different categories were presented, namely wood, oil/gas, electric, heat pump, solar and instantaneous systems. The heat-pump systems were further classified into several groups, namely air source, ground source, solar assisted, ground source-solar assisted, photovoltaic–thermal and gas-engine driven systems. In addition, concerning solar water heating, different types of systems and collectors were presented and reviewed. Principal conclusions from the review are outlined and a general approach to recommend the appropriate water-heating system is proposed. [Copyright &y& Elsevier]

Abstract: This paper presents a dynamic simulation model to predict the performance of an ASHPWH (air source heat pump water heater). The developed model is used to assess its performance in the Lebanese context. It is shown that for the four Lebanese climatic zones, the expected monthly values of the average COP (coefficient of performance) varies from 2.9 to 5, leading to high efficiencies compared with conventional electric water heaters. The energy savings and GHG (greenhouse gas) emissions reduction are investigated for each zone. Furthermore, it is recommended to use the ASHPWH during the period of highest daily ambient temperatures (noon or afternoon), assuming that the electricity tariff and hot water loads are constant. In addition, an optimal management model for the ASHPWH is developed and applied for a typical winter day of Beirut. Moreover, the developed dynamic model of ASHPWH is used to compare the performance of three similar systems that differ only with the condenser geometry, where results show that using mini-condenser geometries increase the COP (coefficient of performance) and consequently, more energy is saved as well as more GHG emissions are reduced. In addition, the condenser “surface compactness” is increased giving rise to an efficient compact heat exchanger. [Copyright &y& Elsevier]

Abstract: Heat pump systems can be found in high number of applications. One of these is the production of domestic hot water. This paper presents a quasi-steady state simulation model to predict the performance of a simple air source heat pump water heater (ASHPWH). The mathematical model consists of submodels of the basic system components, namely, evaporator, condenser, compressor, and expansion valve. These submodels were built based on fundamental principles of heat transfer and thermodynamics. The model was coded into MATLAB software and used to predict system parameters of interest such as hot water temperature, evaporating and condensing pressures, heat rejected in the condenser, electric power input, heating seasonal performance factor, and coefficient of performance. [Copyright &y& Elsevier]

Integrating heat exchanger pipes with structural foundations in one system has created a new renewable solution for buildings' thermal loads. However, the interaction between thermal and geotechnical loads makes their design more complex and challenging. This review-study represents the current state of knowledge about the thermal and thermo-mechanical behaviors of energy piles. It also investigates the key parameters that affect their design concerning the piles' dimensions, the arrangement of pipes, concrete admixture, and fluid characteristics. It is found that the thermal efficiency improves significantly by increasing the number of pipes inside the piles and by adding thermally conductive materials to the concrete within acceptable limits. Besides, this paper reviews most of the studies conducted on optimizing vertical ground heat exchangers coupled with heat pumps. Objective functions, decision variables, design constraints, and optimization methods are specified and listed. It is concluded that a multi-objective optimization is highly recommended to enhance the dual performance of an energy pile system coupled with a heat pump using the 4E evaluation criteria (energy, exergy, economy, and environment) while ensuring the safety of the foundation under thermal cyclic loads. [ABSTRACT FROM AUTHOR]