Search

In this article, a new dual-permanent magnet spoke-type flux-reversal machine (dual-PM SFRM) for direct-drive applications is proposed. Tangentially magnetized permanent magnets (PMs) sandwiched with iron poles are set in stator slots. To increase the torque density within the geometric restrictions, PMs are introduced in the rotor as well and magnetized radially to form a consequent-pole rotor. Global optimizations are conducted and comparisons are made on torque, torque ripple, and torque/PM volume with the existing single-PM SFRM. It is found that the proposed dual-PM SFRM can produce 22.6% larger torque with an optimal PM volume and a 17.5% larger torque with the same PM volume compared with the single-PM counterpart. Moreover, major magnetic field space harmonics are derived analytically and verified by finite-element analysis (FEA) and the torque components produced by the working harmonics are calculated and compared in terms of different stator/rotor pole number combinations. Comparisons are made on back electromotive force, cogging torque, torque performance, and efficiency between dual-PM SFRM and conventional flux-reversal machine. The influence of different stator configurations, i.e., the slot opening, the iron bridge, and the unequal tooth, on torque performance in the proposed dual-PM SFRM has been studied and highlighted. A prototype has been built and tested to validate the FEA calculations. [ABSTRACT FROM AUTHOR]

In this article, split-tooth stator slot permanent magnet (PM) machines, which have high fault-tolerant capability, are proposed. Compared with the existing 12-slot 10-pole (12S10P) stator slot PM machine, the torque can be improved by 66% by properly choosing the split tooth number and other geometric parameters. It is found that two split teeth stator slot PM machine (ST2) shows the best torque characteristics among the stator slot PM machines with different split tooth number. To further illustrate the merits and demerits of ST2, a conventional 6S4P surface mounted PM machine (SPMM) and a 6S4P variable flux reluctance machine serve as the benchmarks to compare with the 6S11P ST2, at both open circuit condition and load condition. The 6S11P ST2 shows 68% higher torque over the 6S4P VFRM. Although the torque of the 6S11P ST2 is around half of the 6S4P SPMM, the former has 70% higher torque per PM volume than the latter. Furthermore, demagnetization analyses under three-phase short-circuit and pure d-axis currents show that the 6S11P ST2 has much better demagnetization withstand capability over the 6S4P SPMM. A Prototype is manufactured and tested to validate the theoretical analyses. [ABSTRACT FROM AUTHOR]

In this article, a new type of consequent pole flux reversal permanent magnet (CFRPM) machine, which features more iron poles than PM poles under one stator tooth, is proposed to improve the torque density. The proposed CFRPM machine with 6 slots and 16 poles (6S16P) is compared with a 12S16P FRPM machine and its consequent pole type, as well as a conventional 6S4P surface-mounted PM (SPM) machine. The proposed 6S16P CFRPM shows the highest torque among the four machines, together with the highest torque per PM volume. For a fair comparison with the 12S16P FRPM machine and its consequent pole type, the torque ripple of the proposed 6S16P CFRPM is suppressed by using two-step skewed rotor. After employing 4° two-step skewed rotor, while exhibits comparable torque ripple, the proposed 6S16P CFRPM still has 43% and 22% higher torque compared with the 12S16P FRPM machine and its consequent pole type. [ABSTRACT FROM AUTHOR]

In this article, spoke array permanent magnet (PM) flux reversal machines (SAPM FRM), which feature spoke array PMs distributed along the stator inner surface, are proposed to improve the torque density. Compared with the conventional surface mounted PM flux reversal machine (SPM FRM), the proposed SAPM FRM can produce about 100% larger torque with negligible torque ripple, as well as higher efficiency and higher power factor. Two prototypes have been built and tested to validate the theoretical analyses. [ABSTRACT FROM AUTHOR]