Search

This paper evaluates the parasitic currents that can occur in the structural part of some types of yokeless and segmented armature axial flux permanent magnet machines, where the frame-supporting stator floating teeth can originate stray paths. In this paper, these paths are defined and modeled, and the consequent effects (induced electro motive forces and currents) are estimated. The amount of these effects depends on the machine geometry, the magnetic circuit structure, and the winding layout. In this paper, the analysis is performed on two different rating machines, comparing their results. The model is validated by measurements on the corresponding prototypes. [ABSTRACT FROM AUTHOR]

In some topologies of yokeless and segmented armature (YASA) axial flux permanent-magnet (AFPM) machines, the particular frame structure required to fasten floating teeth can originate stray paths where parasitic currents may circulate. This paper investigates how the amplitude of these currents and the related additional Joule losses depend on the machine size. Reference is made to wind energy generators, rated from some tens of kilowatts up to a few megawatts. The developed model is mainly based on wind turbine basic data of vendor data sheets, and on the quantities evaluated and tested in two YASA AFPM prototypes, rated 50 and 200 kW. [ABSTRACT FROM PUBLISHER]

This paper proposes an observer for the sensorless control of doubly fed induction machines which is based on the effect of a natural signal injection in the stator windings due to the fifth harmonic of the line voltage. A method to extract the rotor position and speed only from the rotor current and stator voltage measurements is developed: As a novelty, the stator current measurement and the anisotropies in the machine design are not required. A phase-locked loop is used in order to track the harmonic current component which is induced in the rotor by the fifth line voltage harmonic and whose speed and position are directly related to the rotor speed and position. The tuning of the observer parameters is discussed together with the effect of the other line voltage harmonics. This paper is completed by the experimental validation of the observer performances. [ABSTRACT FROM PUBLISHER]