Search

When fast voltage control is used in a power factor control, the ripple of the dc link causes current harmonics. This paper proposes a method to reduce the harmonic content of a fast voltage loop in a power factor correction, which can both produce low distortion during steady-state operation and fast recovery from a load transient. The performance is achieved by using a Takagi–Sugeno-type nonlinear controller for dc-link voltage control. The proposed nonlinear control is compared with linear proportional–integral (PI) control, which is tuned to meet the standardized regulations for the harmonic content in a 3-kW single phase power supply. The results show that the presented nonlinear voltage controller can maintain the dynamic performance of the linear control with reduced current harmonics. It is also shown that the used nonlinear control method requires only marginally more complex control algorithm compared to commonly used linear PI control. [ABSTRACT FROM AUTHOR]

Multiphase electric machines are known to have problems with stator current harmonics. The harmonics can be eliminated by various current harmonic compensation methods. However, using the active harmonic compensation can increase the required output voltage of the inverter supplying the machine. Because the maximum voltage is limited, complete elimination of the current harmonics may not always be possible. For such cases, this paper introduces a strategy for a partial compensation of the current harmonics. The aim of the proposed strategy is to provide a maximum reduction in the magnitude of the harmonics when the available voltage is limited. The strategy is verified by experimental results. [ABSTRACT FROM AUTHOR]